Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “preconditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

BISON Robustness and Performance Improvements

BISON is a modern finite-element based nuclear fuel performance code that has been under development at the Idaho National Laboratory (USA) since 2009 [1]. The code is applicable to both steady and transient fuel behavior and can be used to analyze 1D (spherically symmetric), 2D (axisymmetric and generalized plane strain) or 3D geometries. BISON is the fuel performance code used within CASL for LWR fuel under both normal operating and accident conditions. BISON is built using the INL Multiphysics ObjectOriented Simulation Environment, or MOOSE [2, 3]. MOOSE is a massively parallel, finite element-based framework to solve systems of coupled non-linear partial differential equations using the Jacobian-Free Newton Krylov (JFNK) method [4]. This enables investigation of computationally large problems, for example a full stack of discrete pellets in a LWR fuel rod, or every rod in a full reactor core. MOOSE supports the use of complex two and three-dimensional meshes and uses implicit time integration, important for the widely varied time scale in nuclear fuel simulation. An object-oriented architecture is employed which greatly minimizes the programming effort required to add new material and behavioral models. The flexibility of the implicit and fully coupled multiphysics approach comes with a need for constructing suitable approximations for the Jacobian matrix of the coupled system used for either preconditioning a Krylov solve or in a direct Newton solve. Preconditioning options for Bison problems need to be revisited with new preconditioning methods becoming available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Solving implicit multi-mesh flow and conjugate heat transfer problems with RELAP-7

The fully implicit simulation capability of RELAP-7 to solve multi-mesh flow and conjugate heat transfer problems for reactor system safety analysis is presented. Compared to general single-mesh simulations, the reactor system safety analysis-type of code has unique challenges due to its highly simplified, interconnected, one-dimensional, and zero-dimensional flow network describing multiple physics with significantly different time and length scales. To use the Jacobian-free Newton Krylov-type of solver, preconditioning is generally required for the Krylov method. The uniqueness of the reactor safety analysis-type of code in treating the interconnected flow network and conjugate heat transfer also introduces challenges in providing preconditioning matrix. Typical flow and conjugate heat transfer problems involved in reactor safety analysis using RELAP-7, as well as the special treatment on the preconditioning matrix are presented in detail. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Hybrid S{sub n}-Diffusion and S{sub n}-P{sub 3} transport calculations

We investigate coupling and preconditioning techniques for 1-D hybrid neutronics calculations. Each problem is represented by two spatial regions with S{sub n} used in one region and either diffusion or P{sub 3} used in the other. For each of these two cases we define one coupling scheme and two preconditioned systems. These systems are solved with both fixed-point iteration and the GMRES Krylov method. The solution techniques are compared in terms of iteration count and CPU time per iteration. Preconditioning with a global diffusion operator is found to be very effective for the most difficult problems. (authors)

97 MATHEMATICS AND COMPUTING↗

Preconditioners for multiphase poromechanics with strong capillarity

This paper aims to enhance the performance of Newton–Krylov solvers for coupled poromechanical problems with two-phase flow. In particular, we investigate the impact of capillary pressure on preconditioning strategies. Capillarity complicates the coupling between the solid deformation and fluid pressure degrees of freedom, as well as increases the nonlinearity of the system. Depending on the capillary pressure relation used in the constitutive formulation, the flow equations may exhibit a spectrum of advection-dominated to diffusion-dominated behavior. We propose preconditioning approaches that account for this behavior and lead to robust numerical performance within a broad range of regimes.

42 ENGINEERING↗

On a fully-implicit VMS-stabilized FE formulation for low Mach number compressible resistive MHD with application to MCF

This study presents the development and evaluation of a fully-implicit variational multiscale (VMS) stabilized unstructured finite element (FE) formulation for compressible magnetohydrodynamics (MHD) model, at low Mach number regime. The model describes the dynamics of a compressible conducting fluid in the low Mach number limit in the presence of electromagnetic fields and can be used to study aspects of astrophysical phenomena, important science and technology applications, and basic plasma physics phenomena. The specific applications that motivate this study are macroscopic simulations of the longer time-scale stability and disruptions of magnetic confinement fusion (MCF) devices, specifically the ITER tokamak. The discussion considers the development of the VMS FE representation, the structure of the stabilizing terms that deal with significant convective flows, the stabilization of the nearly incompressible response of the fluid flow, and the stabilization of the constraint that enforces the solenoidal involution on the magnetic field. The nonlinear discretized system is solved with scalable preconditioned Newton–Krylov iterative methods, which employs a multiphysics block preconditioning method based on approximate block factorizations and Schur complements. The study presents an evaluation of the VMS method on a 2D cartesian tearing mode instability, and illustrates the scalability of the solvers on MCF relevant problems. A set of results are also presented for longer time-scale stability and disruptions for the ITER tokamak. These include a vertical displacement event (VDE), and a (1,1) internal kink mode. Here, the formulation is demonstrated to be scalable and also reasonably robust with respect to the Lundquist number scaling.

42 ENGINEERING↗

A parallel multi-domain solution methodology applied to nonlinear thermal transport problems in nuclear fuel pins

This paper describes an efficient and nonlinearly consistent parallel solution methodology for solving coupled nonlinear thermal transport problems that occur in nuclear reactor applications over hundreds of individual 3D physical subdomains. Efficiency is obtained by leveraging knowledge of the physical domains, the physics on individual domains, and the couplings between them for preconditioning within a Jacobian Free Newton Krylov method. Details of the computational infrastructure that enabled this work, namely the open source Advanced Multi-Physics (AMP) package developed by the authors is described. Details of verification and validation experiments, and parallel performance analysis in weak and strong scaling studies demonstrating the achieved efficiency of the algorithm are presented. Furthermore, numerical experiments demonstrate that the preconditioner developed is independent of the number of fuel subdomains in a fuel rod, which is particularly important when simulating different types of fuel rods. Finally, we demonstrate the power of the coupling methodology by considering problems with couplings between surface and volume physics and coupling of nonlinear thermal transport in fuel rods to an external radiation transport code.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of the inverse fast multipole method as a preconditioner in a 3D Helmholtz boundary element method

Here we investigate an efficient preconditioning of iterative methods (such as GMRES) for solving dense linear systems Ax = b that follow from a boundary element method (BEM) for the 3D Helmholtz equation, focusing on the low-frequency regime. While matrix–vector products in GMRES can be accelerated through the low-frequency fast multipole method (LFFMM), the BEM often remains computationally expensive due to the large number of GMRES iterations. We propose the application of the inverse fast multipole method (IFMM) as a preconditioner to accelerate the convergence of GMRES. The IFMM is in essence an approximate direct solver that uses a multilevel hierarchical decomposition and low-rank approximations. The proposed IFMM-based preconditioning has a tunable parameter ε that balances the cost to construct a preconditioner M, which is an approximation of A -1 , and the cost to perform the iterative process by means of M. Namely, using a small (respectively, large) value of ε takes a long (respectively, short) time to construct M, while the number of iterations can be small (respectively, large). A comprehensive set of numerical examples involving various boundary value problems with complicated geometries and mixed boundary conditions is presented to validate the efficiency of the proposed method. We show that the IFMM preconditioner (with a nearly optimal ε of 10 -2 ) clearly outperforms some common preconditioners for the BEM, achieving 1.2–10.8 times speed-up of the computations, in particular when the scale of the underlying scatterer is about five wavelengths or more. In addition, the IFMM preconditioner is capable of solving complicated problems (in a reasonable amount of time) that BD preconditioner can not.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tusas: A fully implicit parallel approach for coupled phase-field equations

In this study, we develop a fully-coupled, fully-implicit approach for phase-field modeling of solidification in metals and alloys. Predictive simulation of solidification in pure metals and metal alloys remains a significant challenge in the field of materials science, as microstructure formation during the solidification process plays a critical role in the properties and performance of the solid material. Our simulation approach consists of a finite element spatial discretization of the fully-coupled nonlinear system of partial differential equations at the microscale, which is treated implicitly in time with a preconditioned Jacobian-free Newton-Krylov method. The approach is algorithmically scalable as well as efficient due to an effective preconditioning strategy based on algebraic multigrid and block factorization. We implement this approach in the open-source Tusas framework, which is a general, flexible tool developed in C++ for solving coupled systems of nonlinear partial differential equations. The performance of our approach is analyzed in terms of algorithmic scalability and efficiency, while the computational performance of Tusas is presented in terms of parallel scalability and efficiency on emerging heterogeneous architectures. We demonstrate that modern algorithms, discretizations, and computational science, and heterogeneous hardware provide a robust route for predictive phase-field simulation of microstructure evolution during additive manufacturing.

97 MATHEMATICS AND COMPUTING↗

An Adaptive Newton-Based Free-Boundary Grad–Shafranov Solver

Equilibria in magnetic confinement devices result from force balancing between the Lorentz force and the plasma pressure gradient. In an axisymmetric configuration like a tokamak, such an equilibrium is described by an elliptic equation for the poloidal magnetic flux, commonly known as the Grad–Shafranov equation. It is challenging to develop a scalable and accurate free-boundary Grad–Shafranov solver, since it is a fully nonlinear optimization problem that simultaneously solves for the magnetic field coil current outside the plasma to control the plasma shape. In this work, we develop a Newton-based free-boundary Grad–Shafranov solver using adaptive finite elements and preconditioning strategies. The free-boundary interaction leads to the evaluation of a domain-dependent nonlinear form of which its contribution to the Jacobian matrix is achieved through shape calculus. The optimization problem aims to minimize the distance between the plasma boundary and specified control points while satisfying two nontrivial constraints, which correspond to the nonlinear finite element discretization of the Grad–Shafranov equation and a constraint on the total plasma current involving a nonlocal coupling term. The linear system is solved by a block factorization, and AMG is called for subblock elliptic operators. The unique contributions of this work include the treatment of a global constraint, preconditioning strategies, nonlocal reformulation, and the implementation of adaptive finite elements. Furthermore, it is found that the resulting Newton solver is robust, successfully reducing the nonlinear residual to 1e-6 and lower in a small handful of iterations while addressing the challenging case to find a Taylor state equilibrium where conventional Picard-based solvers fail to converge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding Electric Vehicle Range and Charging Needs: Interactions Between Ambient Temperature, Commute Patterns, and State-of-Charge Usage

Electric vehicle (EV) performance can vary substantially under real-world operating conditions, particularly due to ambient temperature effects on energy consumption, battery behavior, and thermal management requirements. This study quantifies how weather conditions, daily driving patterns, and State-of-Charge (SOC) usage strategies jointly influence EV driving range, charging frequency, and overall energy efficiency. A detailed and experimentally validated Autonomie vehicle model is developed, integrating a powertrain, a mono-zonal cabin model, and a battery electro-thermal model. Three battery sizes (200-, 300-, and 400-mile homologated ranges) are assessed across five commute profiles (20–200 miles) and six ambient temperatures (−18 °C to 50 °C), including scenarios with and without preconditioning. Results show that extreme temperatures could significantly decrease the maximum achievable range by up to 55% in cold conditions (−18 °C) and 40% in hot conditions (50 °C), relative to moderate conditions. Larger battery packs retain a greater fraction of their nominal range under thermal stress, while smaller packs experience sharper relative penalties due to the higher contribution of thermal loads to total energy demand. The analysis further demonstrates that limiting operation to partial SOC windows (e.g., 80–20%), a common real-world practice, significantly reduces achievable range and increases charging frequency, particularly in cold weather. Thermal preconditioning while plugged in is shown to mitigate these effects for short trips, reducing energy consumption by up to 31% in hot conditions and 7% in cold conditions. The findings demonstrate how climate, SOC usage behavior, and thermal management jointly shape the practical driving capability of EVs, highlighting the importance of efficient thermal management and realistic user charging strategies for ensuring reliable EV operation across diverse climatic scenarios.

33 ADVANCED PROPULSION SYSTEMS↗

Fast Multilevel Solvers for a Class of Discrete Fourth Order Parabolic Problems

In this paper, we study fast iterative solvers for the solution of fourth order parabolic equations discretized by mixed finite element methods. We propose to use consistent mass matrix in the discretization and use lumped mass matrix to construct efficient preconditioners. We provide eigenvalue analysis for the preconditioned system and estimate the convergence rate of the preconditioned GMRes method. Furthermore, we show that these preconditioners only need to be solved inexactly by optimal multigrid algorithms. Our numerical examples indicate that the proposed preconditioners are very efficient and robust with respect to both discretization parameters and diffusion coefficients. We also investigate the performance of multigrid algorithms with either collective smoothers or distributive smoothers when solving the preconditioner systems.

97 MATHEMATICS AND COMPUTING↗

GSTS-Uzawa method for a class of complex singular saddle point problems

In this paper, we propose GSTS–Uzawa method for solving a class of complex singular saddle point problems based on generalized skew-Hermitian triangular splitting (GSTS) iteration method and classical Uzawa method. We research on its semi-convergence properties and the eigenvalues distributions of its preconditioned matrix. The resulting GSTS–Uzawa preconditioner is used to precondition Krylov subspace methods such as the restarted generalized minimal residual (GMRES) method for solving the equivalent formulation of the complex singular saddle point problems. The theoretical results and effectiveness of the GSTS–Uzawa method are supported by a numerical example.

97 MATHEMATICS AND COMPUTING↗

Elevated pressure, a novel cancer therapeutic tool for sensitizing cisplatin-mediated apoptosis in A549

Research highlights: {yields} Sensitized apoptosis in cancer cells stimulated by EP precondition with p53 dependence. {yields} EP attenuates several CDDP-resistance mechanisms. {yields} No harmful effect of EP on normal fibroblasts. -- Abstract: Intensive cancer therapy strategies have thus far focused on sensitizing cancer cells to anticancer drug-mediated apoptosis to overcome drug resistance, and this strategy has led to more effective cancer therapeutics. Cisplatin (cis-diamminedichloroplatinum(II), CDDP) is an effective anticancer drug used to treat many types of cancer, including non-small cell lung carcinoma (NSCLC), and can be used in combination with various chemicals to enhance cancer cell apoptosis. Here, we introduce the use of elevated pressure (EP) in combination with CDDP for cancer treatment and explore the effects of EP on CDDP-mediated apoptosis in NSCLC cells. Our findings demonstrate that preconditioning NSCLC cells with EP sensitizes cells for CDDP-induced apoptosis. Enhanced apoptosis was dependent on p53 and HO-1 expression, and was associated with increased DNA damage and down-regulation of genes involved in nucleotide excision repair. The transcriptional levels of transporter proteins indicated that the mechanism by which EP-induced CDDP sensitization was intracellular drug accumulation. The protein levels of some antioxidants, such as hemeoxygenase-1 (HO-1), glutathione (GSH) and glutathione peroxidase (Gpx), were decreased in A549 cells exposed to EP via the down-regulation of the transcription factor nuclear factor (erythroid-derived 2)-like 2 (Nrf-2). Furthermore, normal human fibroblasts were resistant to EP treatment, with no elevated DNA damage or apoptosis. Collectively, these data show that administration of EP is a potential adjuvant tool for CDDP-based chemosensitivity of lung cancer cells that may reduce drug resistance.

60 APPLIED LIFE SCIENCES↗

Mechanical stretch endows mesenchymal stem cells stronger angiogenic and anti-apoptotic capacities via NFκB activation

Mesenchymal stem cells (MSCs) have been broadly used for tissue regeneration and repair due to their broad differentiation potential and potent paracrine properties such as angiogenic capacity. Strategies to increase their survival rate after transplantation and the angiogenic ability are of priority for the utility of MSCs. In this study, we found that mechanical stretch (10% extension, 30 cycles/min cyclic stretch) preconditioning increase the angiogenic capacity via VEGFA induction. In addition, mechanical stretch also increases the survival rate of mesenchymal stem cells under nutrients deprivation. Consistent with the increase VEGFA expression and resistance to apoptosis, nuclear localization of NFκB activity p65 increased upon mechanical stretch. Inhibition of NFκB activity by BAY 11-708 blocks the pro-angiogenesis and anti-apoptosis function of mechanical stretch. Taken together, our findings here raise the possibility that mechanical stretch preconditioning might enhance the therapeutic efficacy of mesenchymal stem cells. - Highlights: • Mechanical stretch increases the angiogenic capacity via VEGFA induction in MSCs. • Mechanical stretch increases the survival rate of MSCs under nutrients deprivation. • Mechanical stretch manipulates MSCs via the activation of NFκB.

60 APPLIED LIFE SCIENCES↗

Hepatocyte-specific clusterin overexpression attenuates diet-induced nonalcoholic steatohepatitis

Clusterin is a multifunctional glycoprotein that plays important roles and is up-regulated in liver diseases such as hepatitis and hepatocellular carcinoma. However, little is known about the significance of clusterin in the pathogenesis of non-alcoholic steatohepatitis (NASH). The aim of this study is to examine the role of clusterin in progression of steatohepatitis in mice fed a methionine and choline deficient (MCD) diet. We generated hepatocyte-specific clusterin overexpression (hCLU-tg) mice, and hCLU-tg mice showed lower levels of hepatic triglycerides, less infiltration of macrophages and reduction of TNF-α, activation of Nrf-2 than wild-type littermates fed the MCD diet. Also, sustained clusterin expression in liver ameliorated hepatic fibrogenesis by reducing the activation of hepatic stellate cells by MCD diet. Sustained expression of clusterin in liver functioned as a preconditioning stimulus and prevented MCD diet-induced severe steatohepatitis injury via Nrf2 activation. These results demonstrate a novel function of clusterin as an immune preconditioning regulator in various inflammatory diseases including steatohepatitis.

60 APPLIED LIFE SCIENCES↗

Dual effect of hemin on renal ischemia-reperfusion injury

Acute kidney injury (AKI) is a major public health concern, which is contributing to serious hospital complications, chronic kidney disease (CKD) and even death. Renal ischemia-reperfusion injury (IRI) remains a leading cause of AKI. The stress-responsive enzyme, heme oxygenase-1 (HO-1) mediates protection against renal IRI and may be preventively induced using hemin prior to renal insult. This HO-1 induction pathway called hemin preconditioning is largely known to be effective. Therefore, HO-1 might be an interesting therapeutic target in case of predictable AKI (e.g. partial nephrectomy or renal transplantation). However, the use of hemin to mitigate established AKI remains poorly characterized. }Mice underwent bilateral renal IRI for 26 min or sham surgery. After surgical procedure, animals were injected either with hemin (5 mg/kg) or vehicle. Twenty-four hours later, mice were sacrificed. Despite strong HO-1 induction, hemin-treated mice exhibited significant renal damage and oxidative stress as compared to vehicle-treated mice. Interestingly, higher dose of hemin is associated with more severe IRI-induced AKI in a dose-dependent relation. To determine whether hemin preconditioning remains efficient to dampen postoperative hemin-amplified IRI-induced AKI, we pretreated mice either with hemin (5 mg/kg) or vehicle 24 h prior to surgical procedure. Then, all mice (hemin- and vehicle-pretreated) received postoperative injection of hemin (5 mg/kg) to amplify IRI-induced AKI. In comparison to vehicle, prior administration of hemin to renal IRI mitigated hemin-amplified IRI-induced AKI as attested by fewer renal damage, inflammation and oxidative stress. In conclusion, hemin may have a dual effect on renal IRI, protective or deleterious, depending on the timing of its administration.

60 APPLIED LIFE SCIENCES↗

Constructing efficient substructure-based preconditioners for BEM systems of equations

In this work, a generic substructuring algorithm is employed to construct global block-diagonal preconditioners for BEM systems of equations. In this strategy, the allowable fill-in positions are those on-diagonal block matrices corresponding to each BE subregion. As these subsystems are independently assembled, the preconditioner for a particular BE model, after the LU decomposition of all subsystem matrices, is easily formed. So as to highlight the efficiency of the preconditioning proposed, the Bi-CG solver, which presents a quite erratic convergence behavior, is considered. In the particular applications of this paper, 3D representative volume elements (RVEs) of carbon-nanotube (CNT) composites are analyzed. The models contain up to several tens of thousands of degrees of freedom. The efficiency and relevance of the preconditioning technique is also discussed in the context of developing general (parallel) BE codes.

36 MATERIALS SCIENCE↗

Fractionated External Beam Radiotherapy as a Suitable Preparative Regimen for Hepatocyte Transplantation After Partial Hepatectomy

Purpose: Hepatocyte transplantation is strongly considered to be a promising option to correct chronic liver failure through repopulation of the diseased organ. We already reported on extensive liver repopulation by hepatocytes transplanted into rats preconditioned with 25-Gy single dose selective external beam irradiation (IR). Herein, we tested lower radiation doses and fractionated protocols, which would be applicable in clinical use. Methods and Material: Livers of dipeptidylpeptidase IV (DPPIV)-deficient rats were preconditioned with partial liver external beam single dose IR at 25 Gy, 8 Gy, or 5 Gy, or fractionated IR at 5 x 5 Gy or 5 x 2 Gy. Four days after completion of IR, a partial hepatectomy (PH) was performed to resect the untreated liver section. Subsequently, 12 million wild-type (DPPIV{sup +}) hepatocytes were transplanted via the spleen into the recipient livers. The degree of donor cell integration and liver repopulation was studied 16 weeks after transplantation by means of immunofluorescence and DPPIV-luminescence assay. Results: Donor hepatocyte integration and liver repopulation were more effective in the irradiated livers following pretreatment with the IR doses 1 x 25 Gy and 5 x 5 Gy (formation of large DPPIV-positive cell clusters) than single-dose irradiation at 8 Gy or 5 Gy (DPPIV-positive clusters noticeably smaller and less frequent). Quantitative analysis of extracted DPPIV revealed signals exceeding the control level in all transplanted animals treated with IR and PH. Compared with the standard treatment of 1 x 25 Gy, fractionation with 5 x 5 Gy was equally efficacious, the Mann-Whitney U test disclosing no statistically significant difference (p = 0.146). The lower doses of 1 x 5 Gy, 1 x 8 Gy, and 5 x 2 Gy were significantly less effective with p < 0.05. Conclusion: This study suggests that fractionated radiotherapy in combination with PH is a conceivable pretreatment approach to prime the host liver for hepatocyte transplantation, thus bringing the experimental model a step closer to clinical application.

62 RADIOLOGY AND NUCLEAR MEDICINE↗