SEARCH · Engineering Papers

Results for “platform materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Two-dimensional heavy fermions in the van der Waals metal CeSiI

Heavy-fermion metals are prototype systems for observing emergent quantum phases driven by electronic interactions. A long-standing aspiration is the dimensional reduction of these materials to exert control over their quantum phases, which remains a significant challenge because traditional intermetallic heavy-fermion compounds have three-dimensional atomic and electronic structures. Here we report comprehensive thermodynamic and spectroscopic evidence of an antiferromagnetically ordered heavy-fermion ground state in CeSiI, an intermetallic comprising two-dimensional (2D) metallic sheets held together by weak interlayer van der Waals (vdW) interactions. Owing to its vdW nature, CeSiI has a quasi-2D electronic structure, and we can control its physical dimension through exfoliation. The emergence of coherent hybridization of f and conduction electrons at low temperature is supported by the temperature evolution of angle-resolved photoemission and scanning tunnelling spectra near the Fermi level and by heat capacity measurements. Electrical transport measurements on few-layer fakes reveal heavy-fermion behaviour and magnetic order down to the ultra-thin regime. Importantly, our work establishes CeSiI and related materials as a unique platform for studying dimensionally confined heavy fermions in bulk crystals and employing 2D device fabrication techniques and vdW heterostructures to manipulate the interplay between Kondo screening, magnetic order and proximity effects.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Deep Learning Enabled Strain Mapping of Single-Atom Defects in Two-Dimensional Transition Metal Dichalcogenides with Sub-Picometer Precision

Two-dimensional (2D) materials offer an ideal platform to study the strain fields induced by individual atomic defects, yet challenges associated with radiation damage have so far limited electron microscopy methods to probe these atomic-scale strain fields. In this work, we demonstrate an approach to probe single-atom defects with sub-picometer precision in a monolayer 2D transition metal dichalcogenide, WSe 2–2x Te 2x . We utilize deep learning to mine large data sets of aberration-corrected scanning transmission electron microscopy images to locate and classify point defects. By combining hundreds of images of nominally identical defects, we generate high signal-to-noise class averages which allow us to measure 2D atomic spacings with up to 0.2 pm precision. Our methods reveal that Se vacancies introduce complex, oscillating strain fields in the WSe 2–2x Te 2x lattice that correspond to alternating rings of lattice expansion and contraction. These results indicate the potential impact of computer vision for the development of high-precision electron microscopy methods for beam-sensitive materials.

2D materials↗

DOE OSTI2025

Chemo‐Mechanical Coupling in Hydrogels: Dynamics in the Diffusion‐Limited Regime

Hydrogels are characterized by substantial volume changes in response to external stimuli, making them promising candidates for developing smart materials with enhanced adaptability and responsiveness. By integrating chemical reactions, hydrogels acquire dynamic and tunable responsiveness to external stimuli through chemo‐mechanical coupling, expanding their potential in emerging applications. However, capturing their transient behavior remains challenging due to the complex interplay of chemical reactions, solvent transport, and polymer network deformation. Classical theories capture equilibrium swelling but fail to describe time‐dependent phenomena. To address this, a time‐dependent continuum model is developed that explicitly couples these processes. Volume phase transition in hydrogels with homogeneous chemical reactions is investigated, then the effects of reaction kinetics on these transitions are analyzed. The coupling of these mechanisms is further explored through a study of transient mechanical instabilities. To illustrate the impact of distinct reaction and diffusion timescales, a photo‐active gripper is studied for robotic applications. Finally, a photo‐active microswimmer that exhibits non‐reciprocal motion is proposed to highlight the solvent diffusion for locomotion at the micro‐ and nano‐ scales. The work establishes that transient dynamics of chemo‐mechanical hydrogels generate functions not accessible by steady state models and provides a predictive platform for designing adaptive materials in emerging applications.

chemo-mechanical coupling↗

DOE OSTI2023

Temporally Stable Supramolecular Polymeric Salts Enabling High-Performance 3D All-Aromatic Polyimide Lattices

Vat photopolymerization (VP) Additive Manufacturing (AM), in which UV light is selectively applied to cure photo-active polymers into complex geometries with micron-scale resolution, has a limited selection of aliphatic thermoset materials that exhibit relatively poor thermal performance. Ring-opening dianhydrides with acrylate-containing nucleophiles yielded diacrylate ester-dicarboxylic acids that enabled photo-active polyimide (PI) precursors, termed polysalts, upon neutralization with an aromatic diamine in solution. In situ FTIR spectroscopy coupled with a solution and photo-rheological measurements revealed a previously unknown time-dependent instability of 4,4'-oxydianiline (ODA) polysalts due to an aza-Michael addition. Replacement of the electron-donating ether-containing diamine with an electron withdrawing sulfone-containing monomer, e.g., 4,4'-diaminodiphenyl sulfone (DDS), prohibited the aza-Michael addition of the aromatic amine to the activated acrylate double bond. Novel DDS polysalt photocurable solutions are similarly analyzed and validated long-term stability, which enabled reproducible printing of polyimide organogel intermediates. Subsequent VP AM afforded 3-dimensional (3D) structures of intricate complexity and excellent surface finish, as demonstrated with scanning electron microscopy. In addition, the novel PMDA-HEA/DDS solution enabled the production of the first beam latticed architecture comprised of all-aromatic polyimide. Finally, the versatility of a polysalt platform for multi-material printing is further demonstrated by printing parts with alternating polysalt compositions.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Large negative magnetoresistance in the off-stoichiometric topological semimetal PrSb x Te 2- x

Magnetic topological materials LnSbTe (Ln = lanthanide) have attracted intensive attention because of the presence of interplay between magnetism, topological, and electron correlations depending on the choices of magnetic Ln elements. Varying Sb and Te composition is an efficient approach to control structural, magnetic, and electronic properties. Here we report the composition-dependent properties in PrSb x Te 2-x . We identified the tetragonal-to-orthorhombic structure transitions in this material system, and very large negative magnetoresistance in the x = 0.3 composition, which might be ascribed to the coupling between magnetism and transport. Such unusual magnetotransport enables PrSb x Te 2-x topological materials as a promising platform for device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Exploring a New Regime of Molecular Orbital Physics in 4⁢d Cluster Magnets with Resonant Inelastic X-Ray Scattering

Molecular orbital systems with clusters of heavy transition metal (TM) ions are one of the most important classes of model materials for studying the interplay between local physics and effects of itinerancy. Despite a large number of candidates identified in the family of 4⁢d TM materials, an understanding of their physics from competing microscopic energy scales is still missing. Here, we bridge this gap by reporting the first resonant inelastic x-ray scattering (RIXS) measurement on a well-known series of Ru cluster magnets with a 6⁢H-perovskite structure Ba 3 ⁢M⁢Ru 2 ⁢O 9 (M 3+ = In 3+ , Y 3+ , La 3+ ) comprised of Ru dimers. In addition to providing a microscopic explanation for their anomalous magnetic properties, our RIXS measurements combined with theoretical modeling uncover a new regime of molecular orbital physics where the combined effect of large hopping and small spin-orbit coupling results in highly fragile electronic states in the Ru-dimer compounds directly manifested as an abrupt change in the RIXS spectrum accompanying a tiny change in the local structure tuned by the M-site ion. This unique combination of energy scales found only in the 4⁢d but not the 5⁢d cluster magnets highlights the value of these materials as a new platform for studying quantum phase transition involving molecular orbitals.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Sample test array and recovery (STAR) platform at the National Ignition Facility

We have developed the Sample Test Array and Recovery (STAR) platform for the National Ignition Facility (NIF) for studying the thermal and hydrodynamic responses of materials in extreme environments. The STAR platform expands the range of obtainable fluences and quadruples the rate that materials experiments can be conducted at the NIF. Example configurations are demonstrated for fluences spanning 0.56–34 J/cm 2 with environmental isolation for post-shot material recovery and inspection and up to 1740 J/cm 2 without isolation, with surface heating rates of up to 2 × 10 14 K/s. Lastly, an example experiment involving thermally driven shock and spallation of aluminum alloy 7075 is briefly discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Investigation of spin and magnetism in two dimensional materials with atomic-scale spatial resolution (Final Technical Report)

Spintronics is an approach to energy-efficient electronics beyond silicon CMOS that utilizes the electron’s spin degree of freedom for memory and logic. The record spin diffusion length in graphene has generated considerable interest in two dimensional (2D) materials (i.e. graphene and beyond) as a platform for spintronics. Magnetism in 2D van der Waals materials may offer additional opportunities for tunability via strain, external fields, and layer-dependent quantum effects. The inherently atomic-scale nature of exchange interactions and the inherently all-surface nature of 2D sheets motivate an integrated approach combining atomic-scale magnetic characterization, epitaxial growth, and nanodevice fabrication. The mission of the research is to develop and utilize atomic-scale imaging of spin and magnetism via spin-polarized scanning tunneling microscopy (STM) in conjunction with atom-by-atom materials growth via molecular beam epitaxy (MBE) and nanoscale device fabrication to explore new frontiers of spintronics and quantum science in 2D materials. The PIs are particularly motivated by understanding how the magnetic and spin-dependent properties at the atomic scale lead to interesting and potentially useful phenomena in spintronic devices at the macroscopic scale.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Chirality reversal of magnetic solitons in chiral Cr 1/3 TaS 2

Ferromagnetism in two-dimensional (2D) materials provides an ideal platform to study emergent electromagnetic phenomena in low dimensions for future spintronics. In magnetic-element intercalated transition metal dichalcogenides, topologically nontrivial spin textures, such as chiral helimagnetic spin states and chiral soliton lattices, are realized due to the chiral lattice distortions induced by intercalated magnetic ions. Consequently, the magnetic chirality is predictably determined by the sign of antisymmetric exchange interaction (or Dzyaloshinskii–Moriya interaction, DMI) vector that is coupled to the underlying crystal chirality. Here, using cryogenic Lorentz phase microscopy, we directly observed the chirality reversal behavior of the chiral soliton lattices in Cr 1/3 TaS 2 across the structural defects. We show that a partial 1 T stacking in 2H-TaS 2 locally reduces DMI, leading to magnetic chirality reversal with direct atomic resolution imaging. Furthermore, our experimental results show that manipulation of stacking sequence provides a viable way to control the chirality of topologically nontrivial soliton lattices in 2D magnets.

2D materials↗

DOE OSTI2020

Coupling of organic cation and inorganic lattice in methylammonium lead halide perovskites: Insights into a pressure-induced isostructural phase transition

Organic-inorganic hybrid metal-halide perovskite (OIHP) materials provide a tunable platform for engineering their optoelectronic properties. Although several high-pressure studies have been conducted from the OIHP family of single crystals and films, the exact nature of the dynamic coupling of the CH 3 NH 3 (MA) cation with the octahedral lattice framework and the mechanisms responsible for the structural phase transformation under pressure are not well captured. By combined photoluminescence (PL), synchrotron-based x-ray diffraction, and Raman-scattering studies as a function of pressure from methylammonium lead bromide (MAPbBr 3 ), we shed light on an isostructural phase transition due to the coupling of the MA cation and the PbBr 6 lattice through hydrogen bonding. The sharp discontinuities at ~ 1 GPa and ~ 3 GPa in the PL peak positions correlate with the structural changes observed in high-pressure XRD and Raman-scattering studies. The electronic band edge as a function of pressure is calculated within density-functional theory. The PL peak position, intensity and width of the excitonic peak show significant changes at 2 GPa, which corroborate the changes observed in high-pressure Raman-scattering studies. The frequencies of the lattice modes and the C-H/N-H bending and stretching modes of the MA cation show anomalous changes and other nuances at 2 GPa. The suppression of rotational and orientational disorder of the organic moiety is initiated at 2 GPa and the ordering is completed by 3.0 GPa, leading to an order-disorder type cubic II (Im$\overline{3}$) to orthorhombic ( Pnma ) phase transition. Along with the revelation of an isostructural transformation at 2 GPa, this paper highlights the impact of molecular vibrations on the electronic properties of MAPbBr 3 under pressure.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Charge Density Wave and Ferromagnetism in Intercalated CrSBr

In materials with 1D electronic bands, electron–electron interactions can produce intriguing quantum phenomena, including spin-charge separation and charge density waves (CDW). Most of these systems, however, are non-magnetic, motivating a search for anisotropic materials where the coupling of charge and spin may affect emergent quantum states. Here, in this study, chemical intercalation of the van der Waals magnetic semiconductor CrSBr yields Li 0.17(2) (tetrahydrofuran) 0.26(3) CrSBr, which possesses an electronically driven quasi-1D CDW with an onset temperature above room temperature. Concurrently, electron doping increases the magnetic ordering temperature from 132 to 200 K and switches its interlayer magnetic coupling from antiferromagnetic to ferromagnetic. The spin-polarized nature of the anisotropic bands that give rise to this CDW enforces an intrinsic coupling of charge and spin. The coexistence and interplay of ferromagnetism and charge modulation in this exfoliatable material provide a promising platform for studying tunable quantum phenomena across a range of temperatures and thicknesses.

2D magnets↗

DOE OSTI2021

Unprecedented Fluorophore Photostability Enabled by Low‐Loss Organic Hyperbolic Materials

Abstract The dynamics of photons in fluorescent molecules plays a key role in fluorescence imaging, optical sensing, organic photovoltaics, and displays. Photobleaching is an irreversible photodegradation process of fluorophores, representing a fundamental limitation in relevant optical applications. Chemical reagents are used to suppress the photobleaching rate but with exceptionally high specificity for each type of fluorophore. Here, using organic hyperbolic materials (OHMs), an optical platform to achieve unprecedented fluorophore photostability without any chemical specificity is demonstrated. A more than 500‐fold lengthening of the photobleaching lifetime and a 230‐fold increase in the total emitted photon counts are observed simultaneously. These exceptional improvements solely come from the low‐loss hyperbolic dispersion of OHM films and the large resultant Purcell effect in the visible spectral range. The demonstrated OHM platform may open up a new paradigm in nanophotonics and organic plasmonics for super‐resolution imaging and the engineering of light–matter interactions at the nanoscale.

Lee, Yeon Ui↗

DOE OSTI2024

Unconventional Anomalous Hall Effect Driven by Self‐Intercalation in Covalent 2D Magnet Cr 2 Te 3

Covalent 2D magnets such as Cr 2 Te 3 , which feature self-intercalated magnetic cations located between monolayers of transition-metal dichalcogenide material, offer a unique platform for controlling magnetic order and spin texture, enabling new potential applications for spintronic devices. Here, it is demonstrated that the unconventional anomalous Hall effect (AHE) in Cr 2 Te 3 , characterized by additional humps and dips near the coercive field in AHE hysteresis, originates from an intrinsic mechanism dictated by the self-intercalation. This mechanism is distinctly different from previously proposed mechanisms such as topological Hall effect, or two-channel AHE arising from spatial inhomogeneities. Crucially, multiple Weyl-like nodes emerge in the electronic band structure due to strong spin-orbit coupling, whose positions relative to the Fermi level is sensitively modulated by the canting angles of the self-intercalated Cr cations. These nodes contribute strongly to the Berry curvature and AHE conductivity. This component competes with the contribution from bands that are less affected by the self-intercalation, resulting in a sign change in AHE with temperature and the emergence of additional humps and dips. The findings provide compelling evidence for the intrinsic origin of the unconventional AHE in Cr 2 Te 3 and further establish self-intercalation as a control knob for engineering AHE in complex magnets.

2D magnets↗

DOE OSTI2026

Phase Diagrams and Piezoelectric Properties of Wurtzite Al1-x-yScxGdyN Heterostructural Alloys

Ternary nitride alloys based on wurtzite AlN are a promising platform to realize functional materials, particularly ferroelectrics and optical emitters, that can smoothly integrate with conventional microelectronics. Here, a strategic design is presented to enable multifunctional materials by substituting multiple elements into AlN to create quaternary nitride alloys. By combining computational predictions and combinatorial thin film synthesis, the phase diagram of these quaternary Al-Sc-Gd-N alloys (or pseudo-ternary heterostructural AlN-ScN-GdN alloys) is successfully predicted as a function of effective temperature, and we experimentally grow Al1-x-xScxGdyN thin films for the first time. It is revealed that Al1-x-xScxGdyN crystallizes in a wurtzite-derived structure for X + y <~ 0.35, consistent with the calculated phase diagram. The computational investigation explores whether co-substitution induces cooperative effects on these alloys' piezoelectric and ferroelectric properties, finding that it is beneficial for reducing the polarization switching barrier. We calculate that Al1-x-xScxGdyN thin films should display ferroelectric switching. This is supported by our experimental measurements of a high optical bandgap, enhanced piezoelectric coefficient, and a change in the calculated polarization switching mechanism, and we achieve preliminary ferroelectric switching that experimentally realizes the prediction. Overall, our work sets the foundation toward quaternary wurtzite-nitride-based multifunctional materials, including piezoelectrics, ferroelectrics, and possibly even multiferroics.

36 MATERIALS SCIENCE↗

DOE OSTI2026

A New Platform for Twistronics: Perovskite Moiré Superlattices Beyond van der Waals

Moiré superlattices have reshaped condensed‐matter physics by enabling twist‐angle engineering of electronic and excitonic states, traditionally in van der Waals (vdW) systems. This Perspective focuses on perovskites as a transformative non‐van der Waals (non‐vdW) platform for twistronics. These materials are distinguished by ionic‐covalent bonding and soft octahedral lattices that support deep moiré potentials (≈100–200 meV), which in turn yield bright, room‐temperature excitons and tunable quantum phenomena. We organize recent advances into two core classes: (i) moiré superlattices constructed from 2D Ruddlesden‐Popper (RP) perovskites via spontaneous or guided twisted stacking; and (ii) moiré architectures in 3D perovskite lamellae, achieved through topotactic 2D RP‐to‐3D conversion and ligand‐induced self‐assembly. Key experimental observations in these systems include twist‐tunable moiré periods, suppressed exciton–exciton annihilation, flat band‐like transport, and ferroelectric vortex lattices in their oxide perovskite counterparts. Here, we outline key bottlenecks, including defects arising during phase conversion, stringent lattice‐matching requirements, and the absence of in situ twist metrology, and highlight opportunities in lattice‐mismatched heterostructures and multifunctional quantum‐optoelectronic devices. Collectively, these advances establish perovskite moiré systems as a critical bridge between fundamental moiré physics and room‐temperature technological applications.

2D Ruddlesden–Popper perovskites↗

DOE OSTI2025

One-dimensional heterocyclic carbene–Au metal–organic frameworks bridging ultra-high vacuum models and scalable liquid-phase growth

The controlled design of molecule–metal interfaces is central to the development of functional nanomaterials for catalysis, sensing, and molecular electronics. Here we show that the adsorption of a Janus-type diimidazolium precursor on gold yields one-dimensional (1D) N-heterocyclic carbene (NHC)–Au–NHC metal organic frameworks (MOFs) featuring positively charged gold nodes. Using synchrotron X-ray photoemission spectroscopy (XPS), near edge X-ray adsorption fine structure (NEXAFS) spectroscopy and scanning tunnelling microscopy (STM), we demonstrate that thermal activation promotes counterion removal and drives the formation of extended 1D arrays, characterized by ∼1.0 nm Au–Au spacing and adatom densities up to 0.6 atom nm −2 (∼4% of surface atoms). Importantly, we translate this ultra-high vacuum (UHV) benchmark into a scalable solution-phase protocol in ethanol, enabling 1D-MOF growth under mild, base-free, open-air conditions. The resulting films retain structural and electronic signatures of UHV-grown systems, bridging model studies and practical synthesis. This approach establishes NHC–metal frameworks as accessible, tunable platforms for catalysis and materials design.

Gold adatoms↗

DOE OSTI2026

Experimental and simulation study of target biasing effects on plasma transport in linear plasma device MPS-LD

Linear plasma devices (LPDs) are important experimental platforms for investigating plasma–material interactions (PMI). In PMI experiments, it has been found that applying a target bias not only effectively modifies the incident ion energy, but also induces significant changes in the electron density and electron temperature, whereby the evolution of these plasma parameters is primarily governed by plasma transport processes. However, at present, the physical process and mechanism underlying such bias-induced variations remain unclear. In this work, biasing experiments under argon plasma discharge conditions were first carried out on the MPS-LD device. For the corresponding experiments, an electric potential model was newly developed based on the BOUT++ LPD module, enabling self-consistent simulations of plasma transport under biased conditions. Numerical simulations were then performed to reproduce the experimental results and to validate the accuracy of the proposed model. Finally, by combining experimental measurements with numerical simulations, a bias-voltage scan was performed to investigate how the electron density and electron temperature vary with the bias voltage (U bias ). The results show that applying negative bias decreases the target electron density (n e,T ) while increasing the target electron temperature (T e,T ). In contrast, positive bias increases both n e,T and T e,T ; however, at high positive bias, n e,T first reaches a maximum and subsequently decreases with further increases in U bias . The underlying physical mechanisms are analyzed using particle flux, momentum, and energy conservation. It indicates that the applied bias regulates the parallel electric field, thereby changing ion and electron velocities, and consequently affecting the electron density. At high positive bias, the ion velocity is further influenced by ion viscosity, leading to the reversal in n e,T . Meanwhile, the enhanced parallel electric field drives stronger currents, significantly increasing ion–electron frictional work and converting the input bias power into electron energy, which raises the electron temperature. In conclusion, these results contribute to a deeper understanding of the effects and mechanisms of biasing on plasma transport in the MPS-LD device.

BOUT++ simulation↗

DOE OSTI2022

Machine Intelligence-Centered System for Automated Characterization of Functional Materials and Interfaces

Classic design of experiment relies on a time-intensive workflow that requires planning, data interpretation, and hypothesis building by experienced researchers. Here, in this paper, we describe an integrated, machine-intelligent experimental system which enables simultaneous dynamic tests of electrical, optical, gravimetric, and viscoelastic properties of materials under a programmable dynamic environment. Specially designed software controls the experiment and performs on-the-fly extensive data analysis and dynamic modeling, real-time iterative feedback for dynamic control of experimental conditions, and rapid visualization of experimental results. The system operates with minimal human intervention and enables time-efficient characterization of complex dynamic multifunctional environmental responses of materials with simultaneous data processing and analytics. The system provides a viable platform for artificial intelligence (AI)-centered material characterization, which, when coupled with an AI-controlled synthesis system, could lead to accelerated discovery of multifunctional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗