Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photon absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Intramolecular photo-switching and intermolecular energy transfer as primary photoevents in photoreceptive processes: The case of Euglena gracilis

In this paper we report the results of measurements performed by FLIM on the photoreceptor of Euglenagracilis. This organelle consists of optically bistable proteins, characterized by two thermally stable isomeric forms: A{sub 498,} non fluorescent and B{sub 462}, fluorescent. Our data indicate that the primary photoevent of Euglena photoreception upon photon absorption consists of two contemporaneous different phenomena: an intramolecular photo-switch (i.e., A{sub 498} becomes B{sub 462}), and a intermolecular and unidirectional Forster-type energy transfer. During the FRET process, the fluorescent B{sub 462} form acts as donor for the non-fluorescent A{sub 498} form of the protein nearby, which acts as acceptor. We hypothesize that in nature these phenomena follow each other with a domino progression along the orderly organized and closely packed proteins in the photoreceptor layer(s), modulating the isomeric composition of the photoreceptive protein pool. This mechanism guarantees that few photons are sufficient to produce a signal detectable by the cell.

60 APPLIED LIFE SCIENCES↗

Role of carbon in titania as visible-light photocatalyst prepared by flat-flame chemical vapor condensation method

In this article, the authors report that titania nanopowders synthesized by low-pressure flat-flame metal-organic chemical vapor condensation show visible-light photocatalytic ability. Using acetylene and oxygen as fuel and oxidizer for the flame, the titanium isopropoxide was decomposed and oxidized, and the nanoparticles of titania were formed. From the methylene blue decomposition study they found that the powder synthesized under low precursor feed rate possesses high photocatalytic efficiency under illumination of visible light. The visible-light absorption is resort to the presence of carbon since no other chemical elements were found associated with titania. The presence of carbon species is coincident with the presence of visible-light absorption and carbon is in the form of C-C bond. It also suggests that carbon species are associated with catalytic site on anatase surface so that carriers generated by photon absorption by the carbon species can transfer quickly onto catalytic sites and perform the subsequent catalytic reactions. A possibly unreported mechanism of visible-light TiO{sub 2} photocatalysis induced by carbon doping is identified.

36 MATERIALS SCIENCE↗

Genetic algorithm applied to the optimization of quantum cascade lasers with second harmonic generation

A computational model for the optimization of the second order optical nonlinearities in GaInAs/AlInAs quantum cascade laser structures is presented. The set of structure parameters that lead to improved device performance was obtained through the implementation of the Genetic Algorithm. In the following step, the linear and second harmonic generation power were calculated by self-consistently solving the system of rate equations for carriers and photons. This rate equation system included both stimulated and simultaneous double photon absorption processes that occur between the levels relevant for second harmonic generation, and material-dependent effective mass, as well as band nonparabolicity, were taken into account. The developed method is general, in the sense that it can be applied to any higher order effect, which requires the photon density equation to be included. Specifically, we have addressed the optimization of the active region of a double quantum well In{sub 0.53}Ga{sub 0.47}As/Al{sub 0.48}In{sub 0.52}As structure and presented its output characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solvothermal synthesis and study of nonlinear optical properties of nanocrystalline thallium doped bismuth telluride

Nanocrystalline Bismuth telluride and thallium (4 mol %) doped Bismuth telluride were synthesized through hydrothermal method. The as-prepared products were characterized using Powder X-ray Diffraction, High Resolution Transmission Electron Microscopy, Energy Dispersive X-Ray Spectroscopy, UV-Visible spectroscopy and Fourier Transform Infrared Spectroscopy. Powder XRD results revealed the crystalline nature of the obtained phases. HRTEM showed the particle-like morphology of the products. The decrease in the absorption coefficient due to thallium doping was observed in FTIR spectra. The intensity dependent nonlinear optical properties of nanocrystalline bismuth telluride and thallium doped bismuth telluride were studied using the Z-scan technique in open-aperture configuration. Bismuth telluride doped with thallium showed enhanced nonlinear optical response compared to pristine bismuth telluride and hence could be used as a potential candidate for optical power limiting applications. - Graphical Abstract: Nonlinear transmission (Z-scan) curves of nanocrystalline bismuth telluride ({Delta}) and thallium doped bismuth telluride ({open_square}). Thallium doped bismuth telluride showed enhanced nonlinear absorption compared to bismuth telluride. Inset: TEM micrograph of bismuth telluride nanocrystallites. Highlights: Black-Right-Pointing-Pointer Synthesis of Nanocrystalline Bi{sub 2}Te{sub 3} and Thallium doped Bi{sub 2}Te{sub 3} through solvothermal method. Black-Right-Pointing-Pointer Reduced absorption coefficient due to thallium doping found from IR spectroscopy. Black-Right-Pointing-Pointer Open-aperture Z-scan technique for nonlinear optical studies. Black-Right-Pointing-Pointer Two photon absorption based model for theoretical fitting of Z-scan data. Black-Right-Pointing-Pointer Enhanced nonlinear absorption in Thallium doped Bi{sub 2}Te{sub 3} - potential candidate for optical power limiting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photodissociation dynamics of propionyl chloride in the ultraviolet region

Velocity imaging technique combined with (2+1) resonance-enhanced multiphoton ionization (REMPI) is used to detect primary photodissociation of propionyl chloride. In one-color experiments at 235 nm, the Cl and Cl* fragments are produced rapidly, leading to a fraction of translational energy release of 0.37 and 0.35, anisotropy parameters of 1.1 and 0.8, and quantum yield of 0.67 and 0.33, respectively, when initial excitation of the {sup 1}(n, {pi}*){sub CO} band is coupled to the {sup 1}(n{sub Cl}, {sigma}{sub C-Cl}*) repulsive configuration. The resulting propionyl radical with sufficient internal energy may undergo secondary dissociation to yield CO that is characteristic of an isotropic distribution. The REMPI spectra of the CO (0,0) and (1,1) bands are measured, giving rise to a Boltzmann rotational temperature of 1200 and 770 K, respectively, and a Boltzmann vibrational temperature of 2800 K. A minor channel of HCl elimination is not detected, probably because of predissociation in two-photon absorption at 235 nm. In two-color experiments comprising an additional 248 nm photolyzing laser, Cl and Cl* are produced with a fraction of translational energy release of 0.43 and 0.40 and anisotropy parameters of 1.0 and 0.6, respectively. The secondary production of CO is not observed although the internal energy partitioned in the propionyl radical is in the proximity of the dissociation barrier. In either experimental scheme, a small component appearing in the center of the Cl and Cl* images is proposed to stem from ground state dissociation via internal conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Sn doping on nonlinear optical properties of quaternary Se-Sn-(Bi,Te) chalcogenide thin films

The aim of this work is to report the effect of Sn doping on the third order nonlinear optical properties of chalcogenide Se{sub 84-x}Te{sub 15}Bi{sub 1.0}Sn{sub x} thin films. Melt quenching technique has been used for the preparation of bulk chalcogenide glasses. Thin films of the studied composition are deposited on cleaned glass substrate by thermal evaporation technique. Optical band gap (E{sub g}) is calculated by using Tauc extrapolation method and is found to increase from 1.27 eV to 1.64 eV with the incorporation of Sn content. Stryland approach is utilized for the calculation of two photon absorption coefficient (β{sub 2}). The nonlinear refractive index (n{sub 2}) and third order susceptibility (χ{sup (3}) are calculated using Tichy and Ticha approach. The result shows that nonlinear refractive index (n{sub 2}) follows the same trend as that of linear refractive index (n). The values of n{sub 2} of studied composition as compared to pure silica are 1000-5000 times higher.

36 MATERIALS SCIENCE↗

Symmetry breaking and multipeaked solitons in inhomogeneous gain landscapes

We address one-dimensional soliton formation in a cubic nonlinear medium with two-photon absorption and transversally inhomogeneous gain landscape consisting of a single or several amplifying channels. Existence of the solitons requires certain threshold gain while the properties of solitons strongly depend on whether the number of the amplifying channels is odd or even. In the former case, an increase of the gain leads to symmetry breaking, which occurs through the pitchfork bifurcation, and to emergence of a single or several coexisting stable asymmetric modes. In the case of an even number of amplifying channels, we have found only asymmetric stable states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Above-threshold-ionization structures in photoelectron momentum distributions for single ionization of He by a strong electromagnetic field

Our numerical calculations support a recently advanced hypothesis that an individual photon absorption is still a valid concept in the tunneling regime of atomic ionization in a strong electromagnetic field. We observe characteristic structures in the photoelectron momentum distribution resulting from single ionization of the helium atom in the tunneling regime which are normally associated with above threshold ionization (ATI). The nodal structure of these ATI-like rings varies with the photon energy which can be attributed to altering parity of the photon numbers producing the corresponding rings.

74 ATOMIC AND MOLECULAR PHYSICS↗

A modeling framework for optimizing current density in four-terminal tandem solar cells: A case study on GaAs/Si tandem

Here we present a modeling framework to quantify current density losses and determine optimization steps for four-terminal tandem solar cells, which consist of a high-bandgap thin-film top cell and an industrial-type Si wafer bottom cell. We demonstrate the framework on the example of a 21.3% efficient stacked four-terminal GaAs/Si tandem solar cell. In a first step, we develop an optical model for stacked tandem configuration and carry out the current loss analysis for this tandem device. Photon absorption in the tandem is broken down into different channels. All parasitic absorptions that do not contribute to current generation are considered part of a loss channel. In a second step, we quantify the potential current gains from single-parameter optimizations, the redistribution of photon losses into other channels, and the synergistic gains that can be achieved by co-optimization. Finally, using the simulation model, we are able to determine the best sequence of optimizing the short-circuit current density in the GaAs/Si tandem solar cell to possibly achieve 37.8 mA/cm 2 with experimentally feasible parameters.

14 SOLAR ENERGY↗

Investigation of optical limiting properties of Aluminium nanoparticles prepared by pulsed laser ablation in different carrier media

In this communication, we carried out the systematic investigation of nonlinear absorption and scattering properties of Aluminium nanoparticles (Al NPs) in various polar and non-polar solvents. Al NPs were synthesized with pulsed Nd:YAG laser operated at 1064 nm by ablating Al target in polar and non-polar liquid environment like chloroform, chlorobenzene, toluene, benzene, and carbon tetrachloride. Synthesized Al NPs colloids of various solvents differ in appearance and UV-Vis extinction spectra exhibit absorption in the UV region. The characterization of Al NPs performed by Transmission electron microscopy (TEM) studies reveal that NPs are made up of a well crystallized Al inner part (bright zone) embedded with an amorphous metal Al shell (dark region). Growth, aggregation, and precipitation mechanisms which influence the optical properties and stability of NPs are found to be related to the dipole moment of the surrounding liquid environment. The nonlinear absorption and scattering studies are performed by open aperture Z-scan technique with 532 nm under nanosecond pulse excitation. The Z-scan measurements are fitted theoretically to estimate both two-photon absorption (TPA) and nonlinear scattering (NLS) coefficients. In polar solvents like chlorobenzene, chloroform synthesized Al NPs exhibited higher TPA, NLS coefficient values, and lower optical limiting threshold values in comparison with partially polar solvent like toluene and non-polar solvents like benzene and carbontetrachloride. These results indicate the potential use of Al NPs as a versatile optical limiting material.

36 MATERIALS SCIENCE↗

On the Efficiency $\eta$ and the Homogeneity of TiN Kinetic Inductance Detectors Produced through Atomic Layer Deposition

Microwave Kinetic Inductance Detectors (MKIDs) belong to non-equilibrium superconducting devices. It is a new promising device due to high quantum efficiency, low theoretical noise limit, multiplex frequency domain, photon-number-resolving, and energy resolving. In the case of MKIDs, a change in the kinetic inductance is produced by the breaking of Cooper pairs, modifying the electrodynamic response of the superconductor. The production process of an MKID consists of depositing a superconducting thin film on an insulating substrate and applying standard lithographic patterning techniques to produce a resonator structure. When an MKID is produced via sputtering, film nonuniformity is observed, producing instability, low yield, frequency collisions, and low energy resolution. We exploring film uniformity in films produced with Atomic Layer Deposition (ALD) and through ALD archive high values in the energy resolution. The uniformity of ALD is evaluated via measurement of the critical temperature of 4 MKIDs. Two MKIDs belong to the first fabrication process and the other two to another. The results obtained are: ΔTc/max(σT1,σT2) is 0.45 for A1-B1 and 0.21 for A2-B2. The difference in the Tc for MKIDs of the same wafer is around 5.1 mK and from different wafers, the maximum difference is 66 mk with a minimum of 48 mK. However, with the high uniformity archived, we obtained a poor response of the MKIDs when a photon is absorbed. As a consequence of the low response, we examined in the literature about the process of photon absorption. In this evaluation, we were focusing on the down-conversion efficiency as a possible cause for the degraded energy resolution. In this process, one part of the initial energy of the photon is lost, transferred to the creation of quasiparticles and phonons. The phonons that do not possess enough energy to break a Cooper pair are lost from the system. This loss in energy is accounted for by the eff iciency η which has a constant value reported as 0.57 (! from simulation). Due to the efficiency had been reported always as constant. We proceed to evaluate its value through a new method. The process consists of measuring the gain of the system via the photon transfer curve and thermal calibration. The efficiency obtained with this new method is of 0.008 which has a lower value in comparison with the simulation. The methods to obtain the critical temperature, as well as the new method to evaluate the efficiency of an MKID will be shown in this work.

43 PARTICLE ACCELERATORS↗

Frequency dependence of electron dynamics during femtosecond laser resonant photoionization of Li{sub 4} cluster

This study investigates the resonant effects on nonlinear photoionization of Li{sub 4} cluster under femtosecond laser irradiation. The real-time and real-space time-dependent density functional theory is applied to describe the optical linear response and nonlinear electron dynamics during the laser-material interactions. The calculations describe well the behaviors of the ionization process for both the off resonance and on resonance cases. For given laser intensities, the frequency dependence of electron ionization and energy absorption on multiphoton and/or tunnel ionization mechanisms is investigated. Theoretical results show that (1) the off resonance behaves as a classical oscillator whereas resonance leads to an internal excitation with subsequent emission of electrons after the laser termination; (2) when multiphoton ionization dominates, the frequency dependence of emitted electrons and absorbed energy coincides with trend of the spectral cross section for photon absorption; (3) while when tunnel ionization becomes significant, the aforementioned correlation gradually disappears, and the enhancement of resonant effect on photoionization is not manifest.

36 MATERIALS SCIENCE↗

Enabling Overall Water Splitting on Photocatalysts by CO-Covered Noble Metal Co-catalysts

Photocatalytic overall water splitting requires co-catalysts that efficiently promote the generation of H-2 but do not catalyze its reverse oxidation. We demonstrate that CO chemisorbed on metal co-catalysts (Rh, Pt, Pd) suppresses the back reaction while maintaining the rate of H-2 evolution. On Rh/GaN:ZnO, the highest H-2 production rates were obtained with 4-40 mbar of CO, the back reaction remaining suppressed below 7 mbar of O-2. The O-2 and H-2 evolution rates compete with CO oxidation and the back reaction. The rates of all reactions increased with increasing photon absorption. However, due to different dependencies on the rate of charge carrier generation, the selectivities for O-2 and H-2 formation increased in comparison to CO oxidation and the back reaction with increasing photon flux and/or quantum efficiency. Under optimum conditions, the impact of CO to prevent the back reaction is identical to that of a Cr2O3 layer covering the active metal particle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-induced fluorescence of fused silica irradiated by ArF excimer laser

Laser-induced fluorescence (LIF) of high-purity fused silica irradiated by ArF excimer laser is studied experimentally. LIF bands of the fused silica centered at 281 nm, 478 nm, and 650 nm are observed simultaneously. Furthermore, the angular distribution of the three fluorescence peaks is examined. Microscopic image of the laser modified fused silica indicates that scattering of the generated fluorescence by laser-induced damage sites is the main reason for the angular distribution of LIF signals. Finally, the dependence of LIF signals intensities of the fused silica on laser power densities is presented. LIF signals show a squared power density dependence, which indicates that laser-induced defects are formed mainly via two-photon absorption processes.

36 MATERIALS SCIENCE↗

Direct measurements of the ionization profile in krypton helicon plasmas

Helicons are efficient plasma sources, capable of producing plasma densities of 10{sup 19} m{sup -3} with only 100 s W of input rf power. There are often steep density gradients in both the neutral density and plasma density, resulting in a fully ionized core a few cm wide surrounded by a weakly ionized plasma. The ionization profile is usually not well known because the neutral density is typically inferred from indirect spectroscopic measurements or from edge pressure gauge measurements. We have developed a two photon absorption laser induced fluorescence (TALIF) diagnostic capable of directly measuring the neutral density profile. We use TALIF in conjunction with a Langmuir probe to measure the ionization fraction profile as a function of driving frequency, magnetic field, and input power. It is found that when the frequency of the driving wave is greater than a critical frequency, f{sub c} Almost-Equal-To 3f{sub lh}, where f{sub lh} is the lower hybrid frequency at the antenna, the ionization fraction is small (0.1%) and the plasma density low (10{sup 17} m{sup -3}). As the axial magnetic field is increased, or, equivalently, the driving frequency decreased, a transition is observed. The plasma density increases by a factor of 10 or more, the plasma density profile becomes strongly peaked, the neutral density profile becomes strongly hollow, and the ionization fraction in the core approaches 100%. Neutral depletion in the core can be caused by a number of mechanisms. We find that in these experiments the depletion is due primarily to plasma pressure and neutral pumping.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectrally narrowed leaky waveguide edge emission and transient electrluminescent dynamics of OLEDs

In summary, there are two major research works presented in this dissertation. The first research project (Chapter 4) is spectrally narrowed edge emission from Organic Light Emitting Diodes. The second project (Chapter 5) is about transient electroluminescent dynamics in OLEDs. Chapter 1 is a general introduction of OLEDs. Chapter 2 is a general introduction of organic semiconductor lasers. Chapter 3 is a description of the thermal evaporation method for OLED fabrication. The detail of the first project was presented in Chapter 4. Extremely narrowed spectrum was observed from the edge of OLED devices. A threshold thickness exists, above which the spectrum is narrow, and below which the spectrum is broad. The FWHM of spectrum depends on the material of the organic thin films, the thickness of the organic layers, and length of the OLED device. A superlinear relationship between the output intensity of the edge emission and the length of the device was observed, which is probably due to the misalignment of the device edge and the optical fiber detector. The original motivation of this research is for organic semiconductor laser that hasn't been realized due to the extremely high photon absorption in OLED devices. Although we didn't succeed in fabricating an electrically pumped organic laser diode, we made a comprehensive research in edge emission of OLEDs which provides valuable results in understanding light distribution and propagation in OLED devices. Chapter 5 focuses on the second project. A strong spike was observed at the falling edge of a pulse, and a long tail followed. The spike was due to the recombination of correlated charge pair (CCP) created by trapped carriers in guest molecules of the recombination zone. When the bias was turned off, along with the decreasing of electric field in the device, the electric field induced quenching decreases and the recombination rate of the CCP increases which result in the spike. This research project provides a profound understanding of the EL dynamics of OLED, and the theoretical model can fit and explain the experiment data quite well. For the edge emission, we focused on the spectrum and the relative intensity of the edge emission. In the future, more research can be done on the comparison of the intensity between the total edge emission and the surface emission which will give us a sense what fraction of light was trapped in the device. Micro structures can be integrated into the OLED such as DFB and DBR, the character of edge emission should be very interesting. For the transient spike, the CCP model can give a good explanation. But in the model, the effect of the electric field change is not included, because from the start point (t=0), we assume the mobility of carriers is a constant. If we consider the details of the change of the electric field, then when turning of the bias, the decrease of the electric field results in decrease of the carrier mobility and the dissociation rate. If we can add the electric field effect into the model, the whole theory will be more convincing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiative energy receiver for high performance energy conversion cycles

An analysis of gas dynamic processes pertinent to the functioning of earth-based and space-based solar electric power plants is presented, with attention given to potassium vapor as the working fluid. A device is described which features focused photon absorption by a nontransparent flowing gas. The feed flow is effected around the outside walls of a cavity receiver to raise efficiencies by trapping reemitted energy. A theoretical study of the interaction of a photon flux with a coaxial particle flux was performed, with the receiver flow treated as a Graetz flow. The critical parameters were defined, including a figure of merit as the gas enthalpy increase to absorbable energy ratio. A small-scale laboratory model was tested in comparison with the theoretically obtained values. Less than 15% of the absorbed energy was lost through dissipation while an 80% conversion efficiency was attained.

Rault, D.↗

Synthesis, crystal structure and optical properties of an indium phosphate K{sub 3}In{sub 3}P{sub 4}O{sub 16}

An alkali-metal indium phosphate crystal, K{sub 3}In{sub 3}P{sub 4}O{sub 16}, has been synthesized by a high-temperature solution reaction and exhibits a new structure in the family of the alkali-metal indium phosphates system. Single-crystal X-ray diffraction analysis shows the structure to be monoclinic with space group P2{sub 1}/n, and the following cell parameters: a=9.7003(18), b=9.8065(18), c=15.855(3) A, beta=90.346(3){sup o}, V=1508.2(5) A{sup 3}, Z=4, R=0.0254. It possesses three-dimensional [In{sub 3}(PO{sub 4}){sub 4}]{sub n}{sup 3-} anionic frameworks with tunnels occupied by K{sup +} cations running along the a-axis. The emission and absorption spectra of the compound have been investigated. Additionally, the calculations of energy band structure, density of states, dielectric constants and refractive indexes have been performed with the density functional theory method. Also, the two-photon absorption spectrum is simulated by two-band model. The obtained results tend to support the experimental data. - A new indium phosphate crystal, K{sub 3}In{sub 3}P{sub 4}O{sub 16}, was synthesized by a high-temperature solid-state reaction with space group P2{sub 1}/n. It possesses three-dimensional [In{sub 3}(PO{sub 4}){sub 4}]{sub n}{sup 3-} anionic frameworks built by InO{sub 6} octahedra, InO{sub 7} decahedra and PO{sub 4} tetrahedra, and with tunnels occupied by K1 and K2 running along the a-axis, while K3 cations are located in cavities of the structure.

36 MATERIALS SCIENCE↗