Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Remote sensing of heart rate and patterns of respiration on a stationary subject using 94 GHz millimeter wave interferometry.

Using continuous wave, 94-GHz millimeter-wave interferometry, a signal representing chest wall motion can be obtained that contains both the heart rate and respiration patterns of a human subject. These components have to be separated from each other in the received signal. Our method was to use the quadrature and in-phase components of the signal, after removing the mean of each, to find the phase, unwrap it, and convert it to a displacement measurement. Using this, the power spectrum was examined for peaks, which corresponded to the heart rate and respiration rate. The displacement waveform of the chest was also analyzed for discrete heartbeats using a novel wavelet decomposition technique.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of dispersion characteristics of phononic structures

A general theory for calculating the dispersion of bulk acoustic waves in 3D and 2D phononic crystals made of anisotropic materials is presented, which is based on the plane-wave expansion method. Two approaches to separating acoustic modes in the dispersion diagrams are proposed. The pattern of the acoustic field distribution is studied as depending on the wavevector direction for various types of modes. Degeneracy of acoustic modes in directions different from the axes of symmetry of the phononic crystal is demonstrated. Possibilities of the proposed method are illustrated by the application to 3D and 2D silicon-based phononic crystal structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light Water Reactor Sustainability Program Potential to Extend the Range of Established Online Monitoring Technologies, Such as Guided Waves in Nuclear Power Plant Systems

The Light Water Reactor Sustainability Program began to evaluate technologies that could be used to perform online monitoring of piping and other secondary system structural components in commercial NPPs. These online monitoring systems have the potential to identify when a more detailed inspection is needed using real-time measurements, rather than at a pre-determined inspection interval. This transition to condition-based, risk informed automated maintenance will contribute to a significant reduction of operations and maintenance costs that account for most nuclear power generation costs. This report describes the current state of research related to ultrasonic guided wave testing and its application to defect detection in commercial nuclear power plants. The report analyses the applicability of the guided wave technology to secondary piping systems and also study the potential for expanding the range of guided wave technology to include bent piping and other piping components. The ultrasonic guided waves can inspect long stretches of straight piping, however more complex geometries such as elbows, welds, and tees are causing spurious reflections and coherent noise which significantly decrease the sensitivity of the technique. The report analyses two approaches to suppression of coherent noise in guided wave systems: advanced signal processing and pattern recognition based on independent component analysis and blind source separation and hardware-based technique of piezoelectric paint which can be used to facilitate the propagation of mechanical stress waves through piping. It is demonstrated on simulated guided wave data that the independent component analysis is capable of separating different coherent noise components and segregating them from useful signal. The piezoelectric paint approach seem to be a viable alternative to the signal processing methods, however it requires significantly more complicated logistics and initial financial outlay. The future efforts will be concentrated on applying the independent component analysis to real-world guided wave data recorded by the guided wave monitoring system installed on the shell of the low-pressure feedwater heater 13A at Exelon Corporation’s Braidwood Nuclear Generating Station. Also, the joint EPRI-INL research efforts will focus on experimental evaluation of piezoelectric paint as a technique to extend the range of guided wave technology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ERTS: A multispectral image analysis contribution for the geomorphological evaluation of southern Maracaibo Lake Basin

Multispectral analysis of ERTS-A images at scales of 1:1,000,000 and 1:500,000 has been conducted with conventional photointerpretation methods. Specific methods have been developed for the geomorphological analysis of southern Maracaibo Lake Basin which comprises part of the Venezuelan Andean Range, Perija Range, the Tachira gap and the Southern part of the Maracaibo Lake depression. A steplike analysis was conducted to separate macroforms, landscapes and relief units as well as drainage patterns and tectonic features, which permitted the delineation of tectonic provinces, stratigraphic units, geomorphologic units and geomorphologic positions. The geomorphologic synthesis obtained compares favorably with conventional analysis made on this area for accuracy of 1:100,000 scale, and in some features with details obtained through conventional analysis for accuracy of 1:15,000 and field work. Geomorphological units in the mountains were identified according to changes in tone, texture, forms orientation of interfluves and tectonic characteristics which control interfluvial disimetrics.

Salas, F.↗

Photointerpretation of Skylab photography

The author has identified the following significant results. In terms of film grain texture and object definition, the S190B color positive film is distinctly superior to the S190A films, when both are compared in the 9 x 9 inch format. Within the six S190A films, the panchromatic black and white films are superior to the infrared black and white, and the color positive film is superior to the color infrared. Minimum relief differences on the order of 500 to 100 feet could be detected by stereoscopic study, however, it is not possible to determine to what extent vegetation and cultural practices assist in such delineations. Water and wind gaps through major ridges were easily seen. Streams of third order and larger were clearly visible and easy to trace; second order streams were not identified with consistency. Differences in color, tone, and textural patterns rarely supplied clues for differentiating soils or bedrock. The separation of naturally forested areas from areas of cultivation and pasture was effective and a valuable clue to the underlying geology. Suburban and industrial developments were clearly differentiated from urban areas and surrounding agricultural fields. Soil associations could be identified on a regional basis, but no sharp boundary could be drawn separating soil associations.

Mcmurtry, G. J.↗

Comparison of Michigan Basin crude oils

Michigan Basin oils from the Ordovician Trenton, Silurian Niagaran, and Devonian Dundee formations have been geochemically compared by GC, GC-MS, and carbon isotope mass spectrometry. One oil from each formation was selected for detailed analysis which included measurement of individual n-alkane delta 13 C values. The Ordovician and Devonian oils are strikingly similar to one another, yet clearly different from the Silurian oil. This pattern is unexpected because Ordovician and Devonian reservoirs are physically separated by the Silurian strata. From time-temperature considerations, the Devonian oil probably was formed in older strata and has migrated to its present location. Our analyses suggest a common source for the Devonian and Ordovician oils.

Vogler, E. A.↗

A possible common origin for the rare gases on Venus, earth, and Mars

The rare gas concentrations in the terrestrial planets and the carbonaceous chondrites could have been derived from a single source an early solar wind. The fractionation processes responsible for the varying concentration patterns in this model are differential ionization and the relative separation of neutrals from ions due to interaction with the solar magnetic field. If species dependent effects are small relative to radius dependent effects, this process can explain in detail both the relative and absolute abundances in the terrestrial planets and carbonaceous chondrites. The electron temperatures predicted by the data are consistent with astrophysical constraints previously derived for the solar nebula, and the timeline of events necessary for this model is consistent with accretion in a gas free environment. If species dependent fractionations are small, or approximately cancel each other, the earth is found to be outgassed by an order of magnitude more efficiently than Venus or Mars.

Hostetler, C. J.↗

Binary-Symmetry Detection

Transmission errors for zeros and ones tabulated separately. Binary-symmetry detector employs psuedo-random data pattern used as test message coming through channel. Message then modulo-2 added to locally generated and synchronized version of test data pattern in same manner found in manufactured test sets of today. Binary symmetrical channel shows nearly 50-percent ones to 50-percent zeroes correspondence. Degree of asymmetry represents imbalances due to either modulation, transmission, or demodulation processes of system when perturbed by noise.

Lopez, Hiram↗

The relationship of satellite-inferred stratospheric aerosol extinction to the position of the 50-mb north polar jet stream

The relationship between stratospheric aerosols and the location of the north polar night stratospheric jet stream was investigated for selected periods of four successive winters (1979-1982), using measurements from SAM II (Stratospheric Aerosol Measurement II) and SAGE I (Stratospheric Aerosol and Gas Experiment I) satellite-borne sun photometers and corresponding meteorological observations. Each period investigated included a polar stratospheric warming during which major dynamic meteorological changes are known to have perturbed the structure of the polar vortex. The analysis of variations in aerosol extinction mixing ratio patterns among winters and during major stratospheric warming events within separate winters showed a well-defined positive gradient in extinction mixing ratio and temperature across the jet stream from the cyclonic side to the anticyclonic side at altitudes between 20 and 30 km during each winter period. Estimates of extinction mixing ratio profiles measured near the center of the polar vortex suggest that a gradual subsidence took place within the polar vortex during at least three of the four winter periods.

Livingston, John M.↗

Computation of saddle point of attachment

Low-speed flows over a cylinder mounted on a flat plate are studied numerically in order to confirm the existence of a saddle point of attachment in the flow before an obstacle, to analyze the flow characteristics near the saddle point theoretically, and to address the significance of the saddle point of attachment to the construction of external flow structures, the interpretation of experimental surface oil-flow patterns, and the theoretical definition of three-dimensional flow separation. Two numerical codes, one for an incompressible flow and another for a compressible flow, are used for various Mach numbers, Reynolds numbers, grid sizes, and numbers of grid points. It is pointed out that the potential presence of a saddle point of attachment means that a line of 'oil accumulation' from both sides of a skin-friction line emanating outward from a saddle point can be either a line of separation or a line of attachment.

Hung, Ching-Mao↗

Technical Report Series on Global Modeling and Data Assimilation: Comparison of Satellite Global Rainfall Algorithms - Volume 12

Seventeen months of rainfall data (August 1987-December 1988) from nine satellite rainfall algorithms (Adler, Chang, Kummerow, Prabhakara, Huffman, Spencer, Susskind, and Wu) were analyzed to examine the uncertainty of satellite-derived rainfall estimates. The variability among algorithms, measured as the standard deviation computed from the ensemble of algorithms, shows regions of high algorithm variability tend to coincide with regions of high rain rates. Histograms of pattern correlation (PC) between algorithms suggest a bimodal distribution, with separation at a PC-value of about 0.85. Applying this threshold as a criteria for similarity, our analyses show that algorithms using the same sensor or satellite input tend to be similar, suggesting the dominance of sampling errors in these satellite estimates.

Suarez, Max J.↗

Solar torsional oscillations - A net pattern with wavenumber 2 as artifact

A net solar torsional oscillation pattern is uncovered through a new analysis of Mount Wilson Doppler data. This pattern, found from zonal fits, without subtraction of a global fit, consists of a relative polar spin-up around solar maximum, alternating with a single traveling wave that runs from mid latitude to low latitude during the rest of the cycle. It is suggested that these are separate phenomena, and thus that the previously inferred pole-to-equator traveling pattern with wavenumber 2 per hemisphere may be a mathematical artifact. The new pattern retains aspects of the original pattern's relationship to magnetic activity, and agrees better with model predictions.

Snodgrass, H. B.↗

A numerical study of three-dimensional separated flow past a hemisphere cylinder

Separated and vortical flow about a hemisphere-cylinder body has been investigated. An algorithm featuring two implicit factors, and partial flux splitting has been used to solve the thin-layer Navier-Stokes equations. In analyzing the complex flow patterns, experimental data and topological concepts are used to complement the numerical results in interpreting the surface-flow patterns as well as the flowfield structures. Basic issues concerning the three-dimensional separation characteristics and the leeward vortical structures are examined.

Ying, Susan X.↗

Characteristics of ionospheric convection and field-aligned current in the dayside cusp region

The assimilative mapping of ionospheric electrodynamics (AMIE) technique has been used to estimate global distributions of high-latitude ionospheric convection and field-aligned current by combining data obtained nearly simultaneously both from ground and from space. Therefore, unlike the statistical patterns, the 'snapshot' distributions derived by AMIE allow us to examine in more detail the distinctions between field-aligned current systems associated with separate magnetospheric processes, especially in the dayside cusp region. By comparing the field-aligned current and ionospheric convection patterns with the corresponding spectrograms of precipitating particles, the following signatures have been identified: (1) For the three cases studied, which all had an IMF with negative y and z components, the cusp precipitation was encountered by the DMSP satellites in the postnoon sector in the northern hemisphere and in the prenoon sector in the southern hemisphere. The equatorward part of the cusp in both hemispheres is in the sunward flow region and marks the beginning of the flow rotation from sunward to antisunward. (2) The pair of field-aligned currents near local noon, i.e., the cusp/mantle currents, are coincident with the cusp or mantle particle precipitation. In distinction, the field-aligned currents on the dawnside and duskside, i.e., the normal region 1 currents, are usually associated with the plasma sheet particle precipitation. Thus the cusp/mantle currents are generated on open field lines and the region 1 currents mainly on closed field lines. (3) Topologically, the cusp/mantle currents appear as an expansion of the region 1 currents from the dawnside and duskside and they overlap near local noon. When B(sub y) is negative, in the northern hemisphere the downward field-aligned current is located poleward of the upward current; whereas in the southern hemisphere the upward current is located poleward of the downward current. (4) Under the assumption of quasi-steady state reconnection, the location of the separatrix in the ionosphere is estimated and the reconnection velocity is calculated to be between 400 and 550 m/s. The dayside separatrix lies equatorward of the dayside convection throat in the two cases examined.

Lu, G.↗

Phase stability in the two-dimensional anisotropic boson Hubbard Hamiltonian

The two dimensional square lattice hard-core boson Hubbard model with near neighbor interactions has a ‘checkerboard’ charge density wave insulating phase at half-filling and sufficiently large intersite repulsion. When doped, rather than forming a supersolid phase in which long range charge density wave correlations coexist with a condensation of superfluid defects, the system instead phase separates. However, it is known that there are other lattice geometries and interaction patterns for which such coexistence takes place. In this paper we explore the possibility that anisotropic hopping or anisotropic near neighbor repulsion might similarly stabilize the square lattice supersolid. Lastly, by considering the charge density wave structure factor and superfluid density for different ratios of interaction strength and hybridization in the ˆx and ˆy directions, we conclude that phase separation still occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three-dimensional flows about simple components at angle of attack

The structures of three dimensional separated flow about some chosen aerodynamic components at angle of attack are synthesized, holding strictly to the notion that streamlines in the external flow (viscous plus inviscid) and skin friction lines on the body surface may be considered as trajectories having properties consistent with those of continuous vector fields. Singular points in the fields are of limited number and are classified as simple nodes and saddles. Analogous flow structures at high angles of attack about blunt and pointed bodies, straight and swept wings, etc., are discussed, highlighting the formation of spiral nodes (foci) in the pattern of the skin friction lines. How local and global three dimensional separation lines originate and form is addressed, and the characteristics of both symmetric and asymmetric leeward wakes are described.

Peake, D. J.↗

Three-dimensional flows about simple components at angle of attack

The structures of three dimensional separated flow about some chosen aerodynamic components at angle of attack are synthesized, holding strictly to the notion that streamlines in the external flow (viscous plus inviscid) and skin friction lines on the body surface may be considered as trajectories having properties consistent with those of continuous vector fields. Singular points in the fields are of limited number and are classified as simple nodes and saddles. Analogous flow structures at high angles of attack about blunt and pointed bodies, straight and swept wings, etc., are discussed, highlighting the formation of spiral nodes (foci) in the pattern of the skin friction lines. How local and global three dimensional separation lines originate and form is addressed, and the characteristics of both symmetric and asymmetric leeward wakes are described.

Peake, D. J.↗

Plutonium Purification by Anion Exchange for Mark-18A Target Processing

The Mark-18A (Mk-18A) program was established to preserve the unique materials found in Mk-18A targets for future research and development activity within the Department of Energy or other U.S. government agencies. Some of the unique, high-valued materials include but are not limited to plutonium-244, heavy curium, americium-241, and californium. The Savannah River Site has sixty-five (65) Mk-18A targets available for recovery. Mk-18A targets will be removed from confinement, dissolved, chemically separated, and calcined to a stable oxide for transport to Oak Ridge National Laboratory (ORNL). The baseline flowsheet is patterned after the ORNL flowsheet, but adapted to the needs and capabilities of facilities at the Savannah River National Laboratory. The primary method for chemical separation of Pu from the other components of the targets is anion exchange using the Reillex™ HPQ resin. Although data exist in the literature for predicting the behavior of Mk-18A dissolver solutions on the Reillex™ resin, it was determined that the presence of a range of dissolved metals might negatively affect the resin performance, resulting in increased 244 Pu losses or poorer product quality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗