Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orbital motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Timing and Flux Evolution of the Galactic Center Magnetar SGR J1745-2900

We present the X-ray timing and spectral evolution of the Galactic Center magnetar SGR J1745-2900 (SGR*) for the first 4 months post-discovery using data obtained with the Nuclear Spectroscopic Telescope Array (NuSTAR) and Swift observatories. Our timing analysis reveals a large increase in the magnetar spin-down rate by a factor of 2.6 plus or minus 0.07 over our data span. We further show that the change in spin evolution was likely coincident with a bright X-ray burst observed in 2013 June by Swift, and if so, there was no accompanying discontinuity in the frequency. We find that the source 3 to 10 kiloelectronvolt flux has declined monotonically by a factor of approximately 2 over an 80-day period post-outburst accompanied by an approximately 20 percent decrease in the source's blackbody temperature, although there is evidence for both flux and kiloteslas having leveled off. We argue that the torque variations are likely to be magnetospheric in nature and will dominate over any dynamical signatures of orbital motion around Sgr A*.

Stars: magnetic field↗
NASA NTRS2016

eLISA Telescope In-field Pointing and Scattered Light Study

The orbital motion of the three spacecraft that make up the eLISA Observatory constellation causes long-arm line of sight variations of approximately ± one degree over the course of a year. The baseline solution is to package the telescope, the optical bench, and the gravitational reference sensor (GRS) into an optical assembly at each end of the measurement arm, and then to articulate the assembly. An optical phase reference is exchanged between the moving optical benches with a single mode optical fiber (“backlink” fiber). An alternative solution, referred to as in-field pointing, embeds a steering mirror into the optical design, fixing the optical benches and eliminating the backlink fiber, but requiring the additional complication of a two-stage optical design for the telescope. We examine the impact of an in-field pointing design on the scattered light performance.

Livas, J↗
NASA NTRS2019

Orbital Path and Spacecraft Attitude Correction for the MODIS Lunar Spatial Characterization

For the Moderate Resolution Imaging Spectroradiometer(MODIS) on the Terra and Aqua platforms, regularlyscheduled lunar observations using spacecraft roll maneuvershave been used extensively for sensor characterization. Whilethe primary purpose of these observations is for radiometriccalibration of the reflective solar bands, they have also beenleveraged for a number of other sensor performance assessments,such as the band-to-band (BBR) and detector-to-detector (DDR)spatial registration. The spatial registration calculations arecomplicated by the fact that the Moon does not move in astraight path across the sensor field-of-view (FOV). This path isdetermined by the relative orbital motion between the spacecraftand the Moon and the instrument attitude error that resultsfrom the roll maneuver. In this work, we develop a correctionfor the MODIS lunar spatial characterization measurements bycalculating the predicted path of the Moon across the sensor FOVusing spacecraft and lunar ephemeris data to model the relativeorbital motion between the spacecraft and the Moon along withspacecraft attitude error data acquired during the roll maneuver.The difference between measured and predicted positions of theMoon in the MODIS FOV can be used to calculate the BBRand DDR results. Since the predicted path across the FOV willbe the same for each band, the BBR results will be minimallyaffected. However, we will show that the along-scan spread inthe DDR can be significantly reduced, which results in a muchgreater consistency throughout the full mission for both Aquaand Terra MODIS.

Truman Wilson↗
NASA NTRS2019

Spitzer Microlensing of MOA-2016-BLG-231L: A Counter-rotating Brown Dwarf Binary in the Galactic Disk

We analyze the binary microlensing event MOA-2016-BLG-231, which was observed from the ground and from Spitzer. The lens is composed of very-low-mass brown dwarfs (BDs) with M(1)= 21(+12, -5) M(J) and M(2)=9(+5. -2) M(J), and it is located in the Galactic disk D(L)=2.85(+0.88, -0.50) kpc. This is the fifth binary brown dwarf discovered by microlensing, and the BD binary is moving counter to the orbital motion of disk stars. Constraints on the lens physical properties come from late-time, non-caustic-crossing features of the Spitzer light curve. Thus, MOA-2016-BLG-231 shows how Spitzer plays a crucial role in resolving the nature of BDs in binary BD events with short timescales (≲10 days).

Sun-Ju Chung↗
NASA NTRS2019

KELT-22Ab: A Massive, Short-Period Hot Jupiter Transiting a Near-solar Twin

We present the discovery of KELT-22Ab, a hot Jupiter from the KELT-South survey. KELT-22Ab transits the moderately bright (V11.1) Sun-like G2V star TYC 7518-468-1. The planet has an orbital period of P = 1.3866529 0.0000027 days, a radius of = -R 1.285+ R P 0.071 J 0.12 , and a relatively large mass of = - M 3.47+ M P 0.14 J 0.15 . The star has = - + R 1.099 0.046 R 0.079 , = - + M 1.092 0.041 M 0.045 , = - T 5767+ eff 49 50 K, = - log g 4.393+0.0600.039 (cgs), and [m/H]=+ -0.259+0.0830.085; thus other than its slightly super-solar metallicity, it appears to be a near-solar twin. Surprisingly, KELT-22A exhibits kinematics and a Galactic orbit that are somewhat atypical for thin-disk stars. Nevertheless, the star is rotating rapidly for its estimated age, and shows evidence of chromospheric activity. Imaging reveals a slightly fainter companion to KELT-22A that is likely bound, with a projected separation of 6″ (∼1400 au). In addition to the orbital motion caused by the transiting planet, we detect a possible linear trend in the radial velocity of KELT-22A, suggesting the presence of another relatively nearby body that is perhaps non-stellar. KELT-22Ab is highly irradiated (as a consequence of the small semimajor axis of a R = 4.97), and is mildly inflated. At such small separations, tidal forces become significant. The configuration of this system is optimal for measuring the rate of tidal dissipation within the host star. Our models predict that, due to tidal forces, the semimajor axis is decreasing rapidly, and KELT-22Ab is predicted to spiral into the star within the next Gyr.

Knicole Colon↗
NASA NTRS2021

MOA-2006-BLG-074: Recognizing Xallarap Contaminants in Planetary Microlensing

MOA-2006-BLG-074 was selected as one of the most promising planetary candidates in a retrospective analysis of the MOA collaboration: its asymmetric high-magnification peak can be perfectly explained by a source passing across a central caustic deformed by a small planet. However, after a detailed analysis of the residuals, we have realized that a single lens and a source orbiting with a faint companion provides a more satisfactory explanation for all the observed deviations from a Paczynski curve and the only physically acceptable interpretation. Indeed the orbital motion of the source is constrained enough to allow a very good characterization of the binary source from the microlensing light curve. The case of MOA-2006-BLG-074 suggests that the so-called xallarap effect must be taken seriously in any attempts to obtain accurate planetary demographics from microlensing surveys.

Gravitational microlensing exoplanet detection↗
NASA NTRS2021

Expected Collision Rates for Tracked Satellites

This analysis estimates collision risks between tracked satellites based on the statistically expected collision rate _Nc and number of collisions Nc, which are closely related to the collision probability Pc. For isolated encounters, Nc equals Pc. For multi-encounter interactions, Nc can exceed Pc and is significantly easier to approximate semi-analytically. Estimating Nc requires integrating the collision rate over time throughout an interaction, with each required _Nc value calculated as a statistical expectation value based on the uncertainty distributions of initial orbital states. The uncertainty distributions are estimated from orbit determination analyses of satellite trajectory measurements. The formulation accounts for the nonlinear orbital motion of the satellites, and derives Nc and _Nc expressions for Monte Carlo simulations as well as semi-analytical approximations for single- and multi-encounter interactions.

Collision Rates↗
NASA NTRS2022

Precision Measurement of a Brown Dwarf Mass in A Binary System in the Microlensing Event OGLE-2019-BLG-0033/MOA-2019-BLG-035

Context. Brown dwarfs are transition objects between stars and planets that are still poorly understood, for which several competing mechanisms have been proposed to describe their formation. Mass measurements are generally difficult to carry out for isolated objects as well as for brown dwarfs orbiting low-mass stars, which are often too faint for a spectroscopic follow-up. Aims. Microlensing provides an alternative tool for the discovery and investigation of such faint systems. Here, we present an analysis of the microlensing event OGLE-2019-BLG-0033/MOA-2019-BLG-035, which is caused by a binary system composed of a brown dwarf orbiting a red dwarf. Methods. Thanks to extensive ground observations and the availability of space observations from Spitzer, it has been possible to obtain accurate estimates of all microlensing parameters, including the parallax, source radius, and orbital motion of the binary lens. Results. Following an accurate modeling process, we found that the lens is composed of a red dwarf with a mass of M(1) = 0:149 ± 0.010 M⊙ and a brown dwarf with a mass of M(2) = 0:0463 ± 0:0031 M at a projected separation of a⊥ = 0:585 au. The system has a peculiar velocity that is typical of old metal-poor populations in the thick disk. A percent-level precision in the mass measurement of brown dwarfs has been achieved only in a few microlensing events up to now, but will likely become more common in the future thanks to the Roman space telescope.

gravitational lensing↗
NASA NTRS2022

Testing Lyα Emission-line Reconstruction Routines at Multiple Velocities in One System

The 1215.67 Å H ו Lyα emission line dominates the ultraviolet flux of low-mass stars, including the majority of known exoplanet hosts. Unfortunately, strong attenuation by the interstellar medium (ISM) obscures the line core in most stars, requiring the intrinsic Lyα flux to be reconstructed based on fits to the line wings. We present a test of the widely used Lyα emission-line reconstruction code ւʏᴀᴘʏ using phase-resolved, medium-resolution STIS G140M observations of the close white dwarf–M dwarf binary EG UMa. The Doppler shifts induced by the binary orbital motion move the Lyα emission line in and out of the region of strong ISM attenuation. Reconstructions of each spectrum should produce the same Lyα profile regardless of phase, under the well-justified assumption that there is no intrinsic line variability between observations. Instead, we find that the reconstructions underestimate the Lyα flux by almost a factor of 2 for the lowest velocity, most attenuated spectrum, due to a degeneracy between the intrinsic Lyα and ISM profiles. Our results imply that many stellar Lyα fluxes derived from G140M spectra reported in the literature may be underestimated, with potential consequences for, for example, estimates of extreme-ultraviolet stellar spectra and ultraviolet inputs into simulations of exoplanet atmospheres.

M dwarf stars↗
NASA NTRSDate not supplied

The Meteoroid Environment Encountered By the James Webb Space Telescope

All spacecraft run the risk of being damaged by meteoroids at a rate proportional to the spacecraft's surface area. The exceptionally large James Webb Space Telescope (JWST) has endured 20 impacts on its primary mirror in its first year of operation. While most of the impacts experienced were commensurate with pre-launch predictions, one particularly large impact in May 2022 prompted the program to take a fresh look at the meteoroid environment in order to determine whether potentially unaccounted-for meteoroid risks can be mitigated. In this talk, we present a directional model of the meteoroid environment encountered by the spacecraft and compare it with the observed impact rate. Because of JWST’s ability to measure nanometer-size changes to the primary mirror surface, our results indicate that meteoroids carrying as little as 1 Joule of kinetic energy can produce measurable effects. We also find that the impact rate is highest when JWST faces in the direction of orbital motion about the Sun. By implementing a "meteoroid avoidance zone" that discourages observations within 75° of the ram direction, we estimate that JWST has reduced the impact rate by more than half.

Althea Moorhead↗
NASA NTRSDate not supplied

Ultra-Low Noise Laser and Optical Frequency Comb-Based Timing System for the Event Horizon Explorer (EHE) Mission

Very Long Baseline Interferometry (VLBI) requires a highly stable time reference and synchronization system to maintain coherence between observations recorded independently at multiple stations – for example, the array of ground-based radio telescopes that comprise the Event Horizon Telescope (EHT). Instability in the time reference or inaccuracy in the synchronization impacts phase conference and reduces the performance of the VLBI system. For space-based telescopes like the Event Horizon Explorer (EHE) mission, the precision timing system must meet the size, weight, and power (SWaP) constraints of the spacecraft platform and be capable of operating in the space environment. The EHE mission is a proposed extension to the EHT that can improve the angular and time resolution of observations by enabling longer interferometric baselines than are possible on the Earth and sampling a wide range of Fourier spatial frequencies throughout the orbital motion. In this effort, we demonstrate the performance of one option for the EHE mission: the use of a space-qualified, ultra-low noise laser developed as part of the Laser Interferometer Space Antenna (LISA) mission as the timing reference, and an optical frequency comb to transfer the stability of this laser to the microwave regime for instrumentation use. We describe the implementation of the microwave down-conversion, in which the LISA cavity-stabilized laser is locked to a self-referenced optical frequency comb to divide the optical frequency down to 100 MHz. The phase noise of the 100 MHz signal is measured and validated using a phase noise analyzer that is referenced to a separate laboratory ultra-stable laser system. We present the results of this experiment, which demonstrates that the performance of this system meets the EHE requirement: a relative frequency error of 1e-14 from 1 to 30 seconds.

Hannah Tomio↗
NASA NTRSDate not supplied

A Numerical Method for Computing the State Transition Matrix Using Poincare Integral Invariants

The Poincare integral invariants describe the volumes of sets in Hamiltonian phase space. We use these invariants to derive a new numerical procedure for obtaining the state transition matrix (STM), which can be applied to both conservative and nonconservative systems. The method is analogous to a finite difference approximation of the STM, where perturbed states are numerically propagated along with the reference trajectory. We discuss the mathematical similarities between this new STM and existing methods, show numerical results for orbital motion and uncertainty propagation, and discuss new insights afforded by the Hamiltonian properties of phase flow.

state transition matrix↗
NASA NTRS1978

On the attitude motion of an orbiting rigid body under the influence of gravity gradient torque

An investigation is made of the rotational motion of a rigid body orbiting the earth, under the influence of the geogravity-gradient torque. The attitude dynamics are formulated as perturbations from a nominal case. The perturbed equations are solved asymptotically, by the multiple scales technique. The independent variable, time, is extended into a space of higher dimension by means of new scales, fast, slow, etc. Integration of the equations is carried out separately in the new variables. The rapid and slow aspects of the attitude dynamics are systematically separated, resulting in a more efficient computer implementation and enhanced physical insight. The theory is applied to predict the attitude dynamics of an asymmetric rigid body satellite. A comparison is made of the maximum errors as the step size increases as predicted by the multiple scales solution and direct numerical integration. An improvement in computational speed of an order of magnitude is demonstrated.

Tao, Y. C.↗
NASA NTRS1988

The equations of motion for a general orbiting large space flexible system

General motion equations in compact form using dyadic notation are developed for an orbiting flexible body of arbitrary shape. The equations are applied to three typical flexible space systems: a flexible beam, a flexible plate, and a flexible shallow spherical shell in orbit. The inertia dyadic of these flexible bodies may be calculated using the equations which have been obtained.

Xing, Guangqian↗
NASA NTRS2008

Subregions of Motion and Elliptic Halo Orbits in the Elliptic Restricted Three-Body Problem

In this paper we present regions of motion and periodic orbits in the spatial elliptic restricted three body problem (ER3BP). Periodic orbits and regions of motion are fundamental keys to understand any dynamical system; for this reason the Hill's surfaces or the families of halo orbits have been extensively studied in the frame of the circular restricted three body problem. It is our opinion that their natural extensions to the ER3BP have not been studied enough. We divide the position space into forbidden subregions, subregions of motion and low-velocity subregions.We use these notions to define necessary condition for a transfer trajectory in the ER3BP. Also we compute branches of elliptic halo orbits bifurcating from halo orbits in the circular restricted three body problem. The new periodic orbits have principal periods and stability properties different from those of the originating halo orbit.

mission design↗