Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

In Situ X-Ray Observations of Dendritic Fragmentation During Directional Solidification of a Sn-Bi Alloy

Dendrite fragmentation is an important phenomenon in microstructural development during solidification. For instance, it plays a key role in initiating the columnar-to-equiaxed transition (CET). Here, we use x-ray radiography to study dendrite fragmentation rate in a Sn-39.5 wt.% Bi alloy during directional solidification. Experiments were performed in which solidification was parallel and anti-parallel to gravity, leading to significantly different fragmentation rates. We quantify the distribution of fragmentation rate as a function of distance from the solidification front, time in the mushy zone, and volume fraction of solid. While the observed fragmentation rate can be high, there is no evidence of a CET, illustrating that it requires more than just fragmentation to occur.

Gibbs, John W.↗

Direct three-dimensional observation of the microstructure and chemistry of C{sub 3}S hydration

Disagreements about the mechanisms of cement hydration remain despite the fact that portland cement has been studied extensively for over 100 years. One reason for this is that direct observation of the change in microstructure and chemistry are challenging for many experimental techniques. This paper presents results from synchrotron nano X-ray tomography and fluorescence imaging. The data show unprecedented direct observations of small collections of C{sub 3}S particles before and after different periods of hydration in 15 mmol/L lime solution. X-ray absorption contrast is used to make three dimensional maps of the changes of these materials with time. The chemical compositions of hydration products are then identified with X-ray fluorescence mapping and scanning electron microscopy. These experiments are used to provide insight into the rate and morphology of the microstructure formation.

36 MATERIALS SCIENCE↗

Spatiotemporal dynamics of nitrogen dioxide pollution and urban development: Satellite observations over China, 2005–2016

China experienced rapid urbanization and industrialization in recent years, which resulted in large increases of nitrogen dioxide (NO2), particularly in urban areas. We analyze the spatiotemporal variations of the vertical column densities (VCDs) of tropospheric NO2 with the level of urban development across China during the period 2005-2016. Nighttime light (NTL) data are applied as a proxy for urban development to investigate the relationship between NO, pollution and urban development. Both NO2 column data and NTL data are observed by satellite measurements. The annual mean of NO2 VCDs is presented on a grid basis. The average annual variations of NO2 VCDs and NTL value are detected for all 341 prefectural cities. Two-thirds of the cities reached their peak NO2 pollution level around 2010-2012, and decreased afterward. About 10% of the western cities kept on increasing their NO2 levels until 2016. All cities are classified into four categories with respect to the average annual variations of NO2/NTL in 2005-2010, and 2011-2016. Approximately 62% of the cities turned the average annual variations of NO2/NTL from positive to negative. 19% of the cities are in the positive-positive category and 11% of the cities are in the negative-negative category. The remaining 8% of the cities changed their ratios from negative to positive. We summarize the national air pollution regulations, and our results show the effectiveness of the regulations for most eastern China cities. This work can help to design more efficient regional emission reduction policies with sustainable development.

nighttime light data↗

Observation of Vacancies, Faults, and Superstructures in Ln 5 Mo 2 O 12 (Ln = La, Y, and Lu) Compounds with Direct Mo–Mo Bonding

Among oxide compounds with direct metal–metal bonding, the Y 5 Mo 2 O 12 (A 5 B 2 O 12 ) structural family of compounds has a particularly intriguing low-dimensional structure due to the presence of bioctahedral B 2 O 10 dimers arranged in one-dimensional edge-sharing chains along the direction of the metal–metal bonds. Furthermore, these compounds can have a local magnetic moment due to the noninteger oxidation state (+4.5) of the transition metal, in contrast to the conspicuous lack of a local moment that is commonly observed when oxide compounds with direct metal–metal bonding have integer oxidation states resulting from the lifting of orbital degeneracy typically induced by the metal–metal bonding. Although a monoclinic C2/m structure has been previously proposed for Ln 5 Mo 2 O 12 (Ln = La–Lu and Y) members of this family based on prior single crystal diffraction data, it is found that this structural model misses many important structural features. On the basis of synchrotron powder diffraction data, it is shown in this paper that the C2/m monoclinic unit cell represents a superstructure relative to a previously unrecognized orthorhombic Immm subcell and that the superstructure derives from the ordering of interchangeable Mo 2 O 10 and LaO 6 building blocks. The superstructure for this reason is typically highly faulted, as evidenced by the increased breadth of superstructure diffraction peaks associated with a coherence length of 1–2 nm in the c* direction. Finally, it is shown that oxygen vacancies can occur when Ln = La, producing an oxygen deficient stoichiometry of La 5 Mo 2 O 11.55 and an approximately 10-fold reduction in the number of unpaired electrons due to the reduction of the average Mo valence from +4.5 to +4.05, a result confirmed by magnetic susceptibility measurements. Finally, this represents the first observation of oxygen vacancies in this family of compounds and provides an important means of continuously tuning the magnetic interactions within the one-dimensional octahedral chains of this system.

36 MATERIALS SCIENCE↗

Structural Changes in PEO-PPO-PEO Gels Induced by Methylparaben and Dexamethasone Observed Using Time-Resolved SAXS

Aqueous solutions of polyoxyethylene-polyoxypropylene-polyoxyethylene (PEO-PPO-PEO) triblock copolymers (commercially available as Pluronic surfactants) micellize and structurally arrange into cubic quasicrystalline lattices as their temperature is raised. This structural evolution is seen macroscopically as a gelation, and the presence of these ordered phases can be controlled through both polymer concentration and temperature. The presence of added solutes within the dispersions can also affect the onset and kinetics of structure formation. Here we investigate the structures formed in Pluronic F127 solutions ranging from 20 to 30% with two pharmaceutical additives [methylparaben (MP) and dexamethasone (DX)] using small-angle X-ray scattering (SAXS). We observe both the progressive evolution and breakdown of these structures as the temperature is increased from 0 to 80 °C. Additionally, we conducted time-resolved SAXS measurements to elucidate the kinetics of the structural evolution. On the basis of the evolution of scattering peaks as the samples were being heated, we suggest that added MP changes the nucleation behavior of fcc phases within the sample from a heterogeneous process to a more homogeneous distribution of nucleated species. MP and DX also stabilize the micelle lattices, allowing them to persevere at higher temperatures. We observed the unusual result that the presence of DX caused the primary peaks of the structure factor to be suppressed, while preserving the higher order peaks. The primary peaks reappeared at the highest temperatures tested.

36 MATERIALS SCIENCE↗

Ground-based high spectral resolution observations of the entire terrestrial spectrum under extremely dry conditions: OBSERVATIONS OF THE ENTIRE IR SPECTRUM

A field experiment was conducted in northern Chile at an altitude of 5.3 km to evaluate the accuracy of line­by-­line radiative transfer models in regions of the spectrum that are typically opaque at sea level due to strong water vapor absorption. A suite of spectrally resolved radiance instruments collected simultaneous observations that, for the first time ever, spanned the entire terrestrial thermal spectrum (i.e., from 10 to 3000 cm-1, or 1000 to 3.3 μm). These radiance observations, together with collocated water vapor and temperature profiles, are used to provide an initial evaluation of the accuracy of water vapor absorption in the far-­infrared of two line-­by­line radiative transfer models. These initial results suggest that the more recent of the two models is more accurate in the strongly absorbing water vapor pure rotation band. This result supports the validity of the Turner et al. (2012) study that demonstrated that the use of the more recent water vapor absorption model in climate simulations resulted in significant radiative and dynamical changes in the simulation relative to the older water vapor model.

Turner, D. D.↗

Mixed‐Phase Clouds Over the Southern Ocean as Observed From Satellite and Surface Based Lidar and Radar

Abstract This study investigates the occurrence of mixed‐phase clouds (MPC, i.e., cloud layers containing both liquid and ice water at sub‐freezing temperatures) over the Southern Ocean (SO) using space‐ and surface‐based lidar and radar observations. The occurrence of supercooled clouds is dominated by geometrically thin (<1 km) layers that rarely contain ice. We diagnose layers that are geometrically thicker than 1 km to contain ice ~65% and ~4% of the time from below by surface remote sensors and from above by orbiting remote sensors, respectively. We examine the discrepancy in MPC occurrence statistics as diagnosed from below and above the cloud layer. From above, we find that MPC occurrence has a gradient associated with the Antarctic Polar Front near 55°S with a rare occurrence of satellite‐derived MPC south of that latitude. In contrast, surface sensors find ice in 33% of supercooled liquid water layers. We infer using observing system simulation experiments and data analysis that space‐based lidar cannot identify the occurrence of MPC except when secondary ice‐forming processes operate in convection that is, sufficiently strong to loft ice crystals to cloud tops. We conclude that the CALIPSO phase statistics of MPC have a severe low bias in MPC occurrence. Based on surface‐based statistics in the SO, we present a parameterization of the frequency of MPC as a function of cloud top temperature that differs substantially from that used in recent climate model simulations.

54 ENVIRONMENTAL SCIENCES↗

Observation of a d-wave nodal liquid in highly underdoped Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}}.

A key question in condensed-matter physics is to understand how high-temperature superconductivity emerges on adding mobile charged carriers to an antiferromagnetic Mott insulator. We address this question using angle-resolved photoemission spectroscopy to probe the electronic excitations of the non-superconducting state that exists between the Mott insulator and the d-wave superconductor in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}}. Despite a temperature-dependent resistivity characteristic of an insulator, the excitations in this intermediate state have a highly anisotropic energy gap that vanishes at four points in momentum space. This nodal-liquid state has the same gap structure as that of the d-wave superconductor but no sharp quasiparticle peaks. We observe a smooth evolution of the excitation spectrum, along with the appearance of coherent quasiparticles, as one goes through the insulator-to-superconductor transition as a function of doping. Our results suggest that high-temperature superconductivity emerges when quantum phase coherence is established in a non-superconducting nodal liquid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observing the colloidal stability of iron oxide nanoparticles in situ

Colloidal processes such as nucleation, growth, ripening, and dissolution are fundamental to the synthesis and application of engineered nanoparticles, as well as numerous natural systems. In nanocolloids consisting of a dispersion of nanoparticles in solution, colloidal stability is in?uenced by factors including the particle surface facet and capping layer, and local temperature, chemistry, and acidity. In this paper, we investigate colloidal stability through the real-time manipulation of nanoparticles using in situ liquid cell Scanning Transmission Electron Microscopy (STEM). In a distribution of uniform iron oxide nanoparticles, we use the electron beam to precisely control the local chemistry of the solution and observe the critical role that surface chemistry plays in nanoparticle stability. By functionalizing the nanoparticle surfaces with charged amino acids and peptides, stability can be tuned to promote dissolution, growth, or agglomeration, either permanently or reversibly. STEM imaging is used to quantify kinetics of individual nanoparticles subject to local variations in chemistry. These measurements of dissolution and growth rates of iron oxide nanoparticles provide insights into nanoparticle stability relevant to synthesis and functionalization for biomedical applications.

Hufschmid, Ryan D.↗

Observation of Single Top Quark Production at D0

This paper presents the observation of the electroweak production of single top quarks in the D0 detector at the Fermilab Tevatron pp̄ Collider at a center‐of‐mass energy of 1.96 TeV. Events containing an isolated electron or muon and missing transverse energy, together with jets originating from the fragmentation of b quarks are used to measure a cross section for single top‐quark production of σ(pp̄→tb+X,tqb+X) = 3.94±0.88 pb. The probability to measure a cross section at this value or higher in the absence of signal is 2.5×10−7, corresponding to a 5.0 standard deviation significance.

Li, Liang↗

Direct observation of fatigue in epitaxially grown Pb(Zr,Ti)O 3 thin films using second harmonic piezoresponse force microscopy

In this study, we present a direct observation of fatigue phenomena in epitaxially grown Pb(Zr 0.2 Ti 0.8 )O 3 (PZT)thin films using second harmonic piezoresponse force microscopy (SH-PFM). We observed strong correlation between the SH-PFM amplitude and phase signals with the remnant piezoresponse at different switching cycles. The SH-PFM results indicate that the average fraction of switchable domains decreases globally and the phase delays of polarization switching differ locally. In addition, we found that the fatigue developed uniformly over the whole area without developing region-by-region suppression of switchable polarization as in polycrystalline PZTthin films.

36 MATERIALS SCIENCE↗