Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nonlinear systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Neural operators for stochastic modeling of nonlinear structural system response to natural hazards

Traditionally, neural networks have been employed to learn the mapping between finite-dimensional Euclidean spaces. However, recent research has opened up new horizons, focusing on the utilization of deep neural networks to learn operators capable of mapping infinite-dimensional function spaces. Here, in this work, we employ two state-of-the-art neural operators, the deep operator network (DeepONet) and the Fourier neural operator (FNO) for the prediction of the nonlinear time history response of structural systems exposed to natural hazards, such as earthquakes and windstorms. Specifically, we propose two architectures, a self-adaptive FNO and a fast Fourier transform-based DeepONet (DeepFNOnet), where we employ a FNO beyond the DeepONet to learn the discrepancy between the ground truth and the solution predicted by the DeepONet. To demonstrate the efficiency and applicability of the architectures, two problems are considered. In the first, we use the proposed model to predict the seismic nonlinear dynamic response of a six-story shear building subject to stochastic ground motions. In the second problem, we employ the operators to predict the wind-induced nonlinear dynamic response of a high-rise building while explicitly accounting for the stochastic nature of the wind excitation. In both cases, the trained metamodels achieve high accuracy while being orders of magnitude faster than their corresponding high-fidelity models.

DeepONet↗

FINDS: A fault inferring nonlinear detection system. User's guide

The computer program FINDS is written in FORTRAN-77, and is intended for operation on a VAX 11-780 or 11-750 super minicomputer, using the VMS operating system. The program detects, isolates, and compensates for failures in navigation aid instruments and onboard flight control and navigation sensors of a Terminal Configured Vehicle aircraft in a Microwave Landing System environment. In addition, FINDS provides sensor fault tolerant estimates for the aircraft states which are then used by an automatic guidance and control system to land the aircraft along a prescribed path. FINDS monitors for failures by evaluating all sensor outputs simultaneously using the nonlinear analytic relationships between the various sensor outputs arising from the aircraft point mass equations of motion. Hence, FINDS is an integrated sensor failure detection and isolation system.

Lancraft, R. E.↗

Reduced Order Modeling conditioned on monitored features for response and error bounds estimation in engineered systems

Reduced Order Models (ROMs) form essential tools across engineering domains by virtue of their function as surrogates for computationally intensive digital twinning simulators. Although purely data-driven methods are available for ROM construction, schemes that allow to retain a portion of the physics tend to enhance the interpretability and generalization of ROMs. However, physics-based techniques can adversely scale when dealing with nonlinear systems that feature parametric dependencies. This study introduces a generative physics-based ROM that is suited for nonlinear systems with parametric dependencies and is additionally able to provide numerical error bounds associated with the respective estimates. A main contribution of this work is the conditioning of these parametric ROMs to features that can be derived from monitoring measurements, feasibly in an online fashion. This is contrary to most existing ROM schemes, which remain restricted to the prescription of the physics-based, and usually a priori unknown, system parameters. Our work utilizes conditional Variational Autoencoders to continuously map the required reduction bases to a feature vector extracted from limited output measurements, while additionally allowing for a probabilistic assessment of the ROM-estimated Quantities of Interest. An auxiliary task using a neural network-based parametrization of suitable probability distributions is introduced to re-establish the link with physical model parameters. We verify the proposed scheme on a series of simulated case studies incorporating effects of geometric and material nonlinearity under parametric dependencies related to system properties and input load characteristics.

Conditional VAEs↗

Nonlinear control of aircraft

Transformations of nonlinear systems were used to design automatic flight controllers for vertical and short takeoff aircraft. Under the assumption that a nonlinear system can be mapped to a controllable linear system, a method using partial differential equations was constructed to approximate transformations in cases where exact ones cannot be found. An application of the design theory to a rotorcraft, the UH-1H helicopter, was presented.

Hunt, L. R.↗

Minimal norm constrained interpolation

In computational fluid dynamics and in CAD/CAM, a physical boundary is usually known only discreetly and most often must be approximated. An acceptable approximation preserves the salient features of the data such as convexity and concavity. In this dissertation, a smooth interpolant which is locally concave where the data are concave and is locally convex where the data are convex is described. The interpolant is found by posing and solving a minimization problem whose solution is a piecewise cubic polynomial. The problem is solved indirectly by using the Peano Kernal theorem to recast it into an equivalent minimization problem having the second derivative of the interpolant as the solution. This approach leads to the solution of a nonlinear system of equations. It is shown that Newton's method is an exceptionally attractive and efficient method for solving the nonlinear system of equations. Examples of shape-preserving interpolants, as well as convergence results obtained by using Newton's method are also shown. A FORTRAN program to compute these interpolants is listed. The problem of computing the interpolant of minimal norm from a convex cone in a normal dual space is also discussed. An extension of de Boor's work on minimal norm unconstrained interpolation is presented.

Irvine, L. D.↗

Output time response approximation

The approximation of the output response of a nonlinear system by the output response of a linear system to a desired order irrespective of the admissible input applied should prove useful for purposes of control generation and simulation. Given a nonlinear system, an integer k, and an open subset of state space, sufficient conditions are stated that such a linear approximation exists to order k for every point in the set. In addition, a method for finding the approximating linear systems is presented.

Hunt, L. R.↗

A DG-IMEX Method for Two-moment Neutrino Transport: Nonlinear Solvers for Neutrino–Matter Coupling

Neutrino-matter interactions play an important role in core-collapse supernova (CCSN) explosions as they contribute to both lepton number and/or four-momentum exchange between neutrinos and matter, and thus act as the agent for neutrino-driven explosions. Due to the multiscale nature of neutrino transport in CCSN simulations, an implicit treatment of neutrino-matter interactions is desired, which requires solutions of coupled nonlinear systems in each step of the time integration scheme. In this paper we design and compare nonlinear iterative solvers for implicit systems with energy coupling neutrino-matter interactions commonly used in CCSN simulations. Specifically, we consider electron neutrinos and antineutrinos, which interact with static matter configurations through the Bruenn 85 opacity set. The implicit systems arise from the discretization of a nonrelativistic two-moment model for neutrino transport, which employs the discontinuous Galerkin (DG) method for phase-space discretization and an implicit-explicit (IMEX) time integration scheme. In the context of this DG-IMEX scheme, we propose two approaches to formulate the nonlinear systems — a coupled approach and a nested approach. For each approach, the resulting systems are solved with Anderson-accelerated fixedpoint iteration and Newton’s method. The performance of these four iterative solvers has been compared on relaxation problems with various degree of collisionality, as well as proto-neutron star deleptonization problems with several matter profiles adopted from spherically symmetric CCSN simulations. Here, numerical results suggest that the nested Anderson-accelerated fixed-point solver is more efficient than other tested solvers for solving implicit nonlinear systems with energy coupling neutrino-matter interactions.

79 ASTRONOMY AND ASTROPHYSICS↗

Physics-aware adaptive checkpointing with shadow systems for nonlinear PDE simulations

Large-scale simulations of nonlinear partial differential equations (PDEs) that exhibit strongly transient behavior and pattern-forming dynamics produce enormous amounts of data, which, even with modern storage systems, cannot be stored for later curation. Current I/O strategies either write dense time series of snapshots, which is often prohibitive in I/O and storage, or store a few checkpoints that enable restart but incur expensive recomputation cost and provide no control over post-restart error growth, especially when lossy compression is used. Moreover, most, if not all, existing strategies take no account of the actual physical state of the system. Here, we present a simple physics-aware I/O framework in which a low-cost shadow system adaptively triggers lossy checkpoints when the shadow system deviates from the fine-scale simulation. The shadow system can be a coarsened replica of the fine-scale simulation that evolves concurrently. This means that checkpoints are taken based on the physical state of the system: fewer checkpoints are triggered when the system is quiescent while more are taken when the system undergoes a rapid change. This type of behavior is observed in many systems such as Brusselator and FitzHugh–Nagumo. We illustrate that our framework maintains stable restarts, keeps fine-scale restart errors bounded by shadow errors, and reconstructs the time history with significantly lower error and storage than interpolating fixed-interval snapshots, with low-cost shadow replay and modest online synchronization overhead.

Gong, Qian [ORNL] (ORCID:0000000235704142)↗

Online regularization of Poincaré map of storage rings with Shannon entropy

A measurable chaos indicator is used as the online optimization objective in tuning a complicated nonlinear system—the National Synchrotron Light Source-II storage ring. Through analyzing the Shannon entropy in measured Poincaré maps, not only can the commonly used nonlinear characterizations be extracted, but more importantly, the chaos can be quantified and then used for an online regularization of these maps. The method itself is general and applicable to other tunable nonlinear systems as well. Published by the American Physical Society 2025

36 MATERIALS SCIENCE↗

Nonlinear transformat

A technique for designing automatic flight controllers for aircraft which utilizes the transformation theory of nonlinear systems to linear systems is presently being developed at NASA Ames Research Center. A method is considered in which a given nonlinear is transformed to a controllable linear system in Brunovsky canonical form. A linear approximation is introduced to the nonlinear system called the modified tangent model. This model is easily computed. Constructing the transformation for this model enables the designer to find an approximate transformation for the nonlinear system.

Ford, H.↗

Dynamically reconfigurable topological routing in nonlinear photonic systems

The propagation path of topologically protected states is bound to the interface between regions with different topology, and as such, the functionality of linear photonic devices leveraging these states is fixed during fabrication. Here, we propose a mechanism for dynamic control over a driven dissipative system’s local topology, yielding reconfigurable topological interfaces and thus tunable paths for protected routing. We illustrate our approach in non-resonantly pumped polariton lattices, where the nonlinear interaction between the polaritons and the exciton reservoir due to non-resonant pumping can yield picosecond-scale changes in the propagation paths of the chiral edge states. To analytically confirm the numerically observed topological dynamics, we generalize the spectral localizer framework to non-linear non-Hermitian Chern materials and apply this framework to a continuous model of the polariton system based on a driven-dissipative Gross-Pitaevskii equation. In doing so, we show that the local changes in the polariton lattice’s topology are captured by a local Chern marker. Looking forward, we anticipate such reconfigurable topological routing will enable the realization of novel classes of topological photonic devices.

Wong, Stephan [Sandia National Laboratories (SNL-N↗

Encrypted model predictive control design for security to cyberattacks

Abstract In recent years, cyber‐security of networked control systems has become crucial, as these systems are vulnerable to targeted cyberattacks that compromise the stability, integrity, and safety of these systems. In this work, secure and private communication links are established between sensor–controller and controller–actuator elements using semi‐homomorphic encryption to ensure cyber‐security in model predictive control (MPC) of nonlinear systems. Specifically, Paillier cryptosystem is implemented for encryption‐decryption operations in the communication links. Cryptosystems, in general, work on a subset of integers. As a direct consequence of this nature of encryption algorithms, quantization errors arise in the closed‐loop MPC of nonlinear systems. Thus, the closed‐loop encrypted MPC is designed with a certain degree of robustness to the quantization errors. Furthermore, the trade‐off between the accuracy of the encrypted MPC and the computational cost is discussed. Finally, two chemical process examples are employed to demonstrate the implementation of the proposed encrypted MPC design.

Suryavanshi, Atharva↗

Polarization radiation in the planetary atmosphere delimited by a heterogeneous diffusely reflecting surface

Spatial frequency characteristics (SFC) and the scattering functions were studied in the two cases of a uniform horizontal layer with absolutely black bottom, and an isolated layer. The mathematical model for these examples describes the horizontal heterogeneities in a light field with regard to radiation polarization in a three dimensional planar atmosphere, delimited by a heterogeneous surface with diffuse reflection. The perturbation method was used to obtain vector transfer equations which correspond to the linear and nonlinear systems of polarization radiation transfer. The boundary value tasks for the vector transfer equation that is a parametric set and one dimensional are satisfied by the SFC of the nonlinear system, and are expressed through the SFC of linear approximation. As a consequence of the developed theory, formulas were obtained for analytical calculation of albedo in solving the task of dissemination of polarization radiation in the planetary atmosphere with uniform Lambert bottom.

Strelkov, S. A.↗

An approximation theory for the identification of nonlinear distributed parameter systems

An abstract approximation framework for the identification of nonlinear distributed parameter systems is developed. Inverse problems for nonlinear systems governed by strongly maximal monotone operators (satisfying a mild continuous dependence condition with respect to the unknown parameters to be identified) are treated. Convergence of Galerkin approximations and the corresponding solutions of finite dimensional approximating identification problems to a solution of the original finite dimensional identification problem is demonstrated using the theory of nonlinear evolution systems and a nonlinear analog of the Trotter-Kato approximation result for semigroups of bounded linear operators. The nonlinear theory developed here is shown to subsume an existing linear theory as a special case. It is also shown to be applicable to a broad class of nonlinear elliptic operators and the corresponding nonlinear parabolic partial differential equations to which they lead. An application of the theory to a quasilinear model for heat conduction or mass transfer is discussed.

Banks, H. T.↗

An approximation theory for the identification of nonlinear distributed parameter systems

An abstract approximation framework for the identification of nonlinear distributed parameter systems is developed. Inverse problems for nonlinear systems governed by strongly maximal monotone operators (satisfying a mild continuous dependence condition with respect to the unknown parameters to be identified) are treated. Convergence of Galerkin approximations and the corresponding solutions of finite dimensional approximating identification problems to a solution of the original finite dimensional identification problem is demonstrated using the theory of nonlinear evolution systems and a nonlinear analog of the Trotter-Kato appproximation result for semigroups of bounded linear operators. The nonlinear theory developed here is shown to subsume an existing linear theory as a special case. It is also shown to be applicable to a broad class of nonlinear elliptic operators and the corresponding nonlinear parabolic partial differential equations to which they lead. An application of the theory to a quasilinear model for heat conduction or mass transfer is discussed.

Banks, H. T.↗