Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Source Characterization of the Declared North Korean Nuclear Tests From Regional Distance Coda Wave Spectral Ratios

Abstract Seismic observations of underground nuclear explosions provide crucial data on source yield and depth that cannot easily be estimated from other geophysical methods. However, it is difficult to obtain reliable yield estimates for test sites for which we do not have direct seismic calibration experiments. To obtain source information from uncalibrated sites and paths, local and regional seismic records of six, proximal, declared underground nuclear explosions in North Korea are used to compute spectral ratios of narrow‐band waveform envelopes of body‐wave coda that remove path and site effects to reveal precise, relative source moment. The yields of these explosions are obtained from the observed source ratios by simultaneously fitting the classical source model of Mueller and Murphy (1971), https://doi.org/10.1785/bssa0610061675 to all event pairs. The source model provides an impressive fit to the observations considering that the P phase coda derived source spectral ratios did not require a prior knowledge of the source or regionally calibrated corrections to be applied to the data. However, the observed corner frequencies from S wave coda spectral ratios are lower than the source model predictions, but are well fit by models calculated using the corner frequency consistent with the Fisk conjecture. The results presented here provide novel constraints on the spectral distributions of the energy radiated by the sources of the DPRK test series, and allows for an independent evaluation of existing estimated source model parameters.

58 GEOSCIENCES↗
DOE OSTI2023

Scalable computations for nonstationary Gaussian processes

Nonstationary Gaussian process models can capture complex spatially varying dependence structures in spatial datasets. However, the large number of observations in modern datasets makes fitting such models computationally intractable with conventional dense linear algebra. In addition, derivative-free or even first-order optimization methods can be very slow to converge when estimating many spatially varying parameters. In this paper, we present a computational framework which couples an algebraic block diagonal plus low-rank covariance matrix approximation with stochastic trace estimation to facilitate the efficient use of second-order solvers for maximum likelihood estimation of Gaussian process models with many parameters. We demonstrate the effectiveness of these methods by simultaneously fitting 192 parameters in the popular nonstationary model of Paciorek and Schervish using 107,600 sea surface temperature anomaly measurements.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Solid and gas thermal conductivity models improvement and validation in various porous insulation materials

In the past few decades, significant efforts have been made to improve the theoretical understanding of thermal transport mechanisms in thermal insulation materials and push the thermal conductivity's lower limits. However, most works focused singularly on specific types of materials, and the models used for thermal conductivity predictions are diverse - a model that fits one material might not fit others. Here, we improve and unify the gas and solid thermal conductivity models for porous materials. Through experimental characterization of several different materials as well as literature data for other materials, these models are validated. Further, we have also found that the pressure-dependent gas thermal conductivity of most materials can be well fitted by using one or two pore sizes without using a complex pore size distribution. With the refined models, we decompose the effective thermal conductivity of several thermal insulation materials into gas, solid, and radiation contributions. For cellular (polystyrene and polyurethane) foams, the relative contributions from air, solid, and radiation are 58–75%, 3–11%, 16–38%, respectively. For granular porous materials (polyurethane and silica in this work), the contributions from air, solid, and radiation are 45–66%, 34–46%, and 0–8%, respectively. This work is expected to provide guidance on the design and optimization of the next generation of thermal insulation materials, for example, through the effort of reducing gas conduction and radiation in foams and suppressing gas and solid conduction in aerogels.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Overcoming significant challenges in extracting off-stoichiometric thermodynamics using the compound energy formalism through complementary use of experimental and first principles data: A case study of Ba 1-x Sr x FeO 3-δ

The compound energy formalism (CEF) is a powerful framework to describe the thermodynamics of metal oxides as a function of off-stoichiometry, temperature, and composition. The thermodynamic properties are crucial materials design attributes in metal oxide-based oxygen-exchange chemical processes. Despite the richness of information an accurate CEF model provides, a method to determine a unique and accurate fit for oxygen exchange materials remains elusive. This contribution details a method for fitting the CEF model that overcomes the current fitting challenges through three innovations: 1) the combination of density functional theory calculations with experimental data decorrelates excess terms and delineates the enthalpic/entropic contributions to the Gibbs free energy; 2) a systematic determination of the important CEF model terms, removing thermodynamic predetermining human intervention; 3) a self-consistent solution of the starting oxygen offstoichiometry (δ 0 ) of thermogravimetric measurements. Thus, our method enables the reliable extraction of off-stoichiometric metal oxide thermodynamic properties and facilitates rapid materials compositional screening, and reliable process design of systems dependent on off-stoichiometric redox-active metal oxides. We apply this method to a Ba x Sr 1-x FeO 3-δ test case. We find by systematically examining the performance of the CEF model fit with and without each innovation that all three innovations are necessary for an accurate fit. We determined that reduction enthalpy is higher and more sensitive to off-stoichiometry when the Sr fraction is large (139.5 and 185.3 kJ/mol O 2 for SrFeO 3 at δ = 0 and δ = 0.5, respectively vs. nearly constant 83 kJ/mol O 2 for BaFeO 3 ). However, the reduction entropy is mostly insensitive to Sr fraction, but highly dependent on δ suggesting larger contributions in the non-configurational entropy parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Timing the r -process Enrichment of the Ultra-faint Dwarf Galaxy Reticulum II

The ultra-faint dwarf galaxy Reticulum II (Ret II) exhibits a unique chemical evolution history, with ${72}_{-12}^{+10}$% of its stars strongly enhanced in r-process elements. We present deep Hubble Space Telescope photometry of Ret II and analyze its star formation history. As in other ultra-faint dwarfs, the color–magnitude diagram is best fit by a model consisting of two bursts of star formation. If we assume that the bursts were instantaneous, then the older burst occurred around the epoch of reionization, forming ~80% of the stars in the galaxy, while the remainder of the stars formed ~3 Gyr later. When the bursts are allowed to have nonzero durations, we obtain slightly better fits. The best-fitting model in this case consists of two bursts beginning before reionization, with approximately half the stars formed in a short (100 Myr) burst and the other half in a more extended period lasting 2.6 Gyr. Considering the full set of viable star formation history models, we find that 28% of the stars formed within 500 ± 200 Myr of the onset of star formation. The combination of the star formation history and the prevalence of r-process-enhanced stars demonstrates that the r-process elements in Ret II must have been synthesized early in its initial star-forming phase. We therefore constrain the delay time between the formation of the first stars in Ret II and the r-process nucleosynthesis to be less than 500 Myr. This measurement rules out an r-process source with a delay time of several Gyr or more, such as GW170817.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Uncertain characterization of reservoir fluids due to brittleness of equation of state regression

Equations of state (EoS) play a central role in modeling the phase equilibrium of fluid mixtures. Their parameterization involves fitting a model to experimental data, i.e., solving a nonlinear, non-convex, multivariate optimization problem. The latter requires one to select design variables, domains of definition for each variable, and weights assigned to individual measurements. We demonstrate that subjective choices of an optimization algorithm and an initial guess also impact the regression process. Consequently, EoS predictions are fundamentally uncertain even after the EoS tuning to a limited set of experimental data points. We demonstrate this observation for two hydrocarbon reservoir fluids, in which five properties of the heaviest carbon fraction are treated as design variables. While all the optimization algorithms and initial guesses match experimental data for the gas and liquid properties, the resulting EoS parameterizations lead to dramatically different predictions of the fluid’s thermophysical behavior in the unsampled pressure and temperature regions. In conclusion, we propose the probabilistic treatment of design variables to quantify the predictive uncertainty of the resulting fluid models.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Surrogate modelling the Baryonic Universe II: On forward modelling the colours of individual and populations of galaxies

ABSTRACT Among the properties shaping the light of a galaxy, the star formation history (SFH) is one of the most challenging to model due to the variety of correlated physical processes regulating star formation. In this work, we leverage the stellar population synthesis model fsps, together with SFHs predicted by the hydrodynamical simulation IllustrisTNG and the empirical model universemachine, to study the impact of star formation variability on galaxy colours. We start by introducing a model-independent metric to quantify the burstiness of a galaxy formation model, and we use this metric to demonstrate that universemachine predicts SFHs with more burstiness relative to IllustrisTNG. Using this metric and principal component analysis, we construct families of SFH models with adjustable variability, and we show that the precision of broad-band optical and near-infrared colours degrades as the level of unresolved short-term variability increases. We use the same technique to demonstrate that variability in metallicity and dust attenuation presents a practically negligible impact on colours relative to star formation variability. We additionally provide a model-independent fitting function capturing how the level of unresolved star formation variability translates into imprecision in predictions for galaxy colours; our fitting function can be used to determine the minimal SFH model that reproduces colours with some target precision. Finally, we show that modelling the colours of individual galaxies with per cent-level precision demands resorting to complex SFH models, while producing precise colours for galaxy populations can be achieved using models with just a few degrees of freedom.

Chaves-Montero, Jonás (ORCID:0000000295534261)↗
DOE OSTI2023

Formal Experimentation and Analysis of Handheld RFID Readers as a Tool for Nuclear Material Accounting

Commercial, off-the-shelf Radio Frequency Identification (RFID) systems have been successfully deployed for inventory tracking in numerous industries, but their viability in the tracking of complex environments containing nuclear material is less understood. Of primary interest in this setting is a RFID tracking system for nuclear material accounting which can reliably identify as many tags as possible with high accuracy, while also reducing an operator’s exposure to radiation. In this work, we develop a formal statistical approach to identify relevant handheld RFID reader settings which optimize tagging performance. To achieve this goal, we design a full factorial split-plot experiment for a static shelf configuration scene with 50 randomly placed nuclear material containers affixed with RFID tags. We use Bayesian inference to fit a second-order response surface model which expresses the probability of a successful match for each container as a function of the experimental factors. Such effects are allowed to vary across individual containers and the containers’ population in its entirety to estimate overall effects. Uncertainties of estimates and predictions are quantified via their corresponding posterior distributions. Following extensive model checking and validation, the fitted model is used to identify experimental factors which maximize matching probabilities at both the container-level and for the full shelf configuration scene. We also analyze sensitivity of performance to relevant factors.

25 ENERGY STORAGE↗
DOE OSTI2025

Revenue-Maximizing Shared Parking and Electric Vehicle Charging Management in Multi-Unit Dwellings

In urban areas, searching for parking and electric vehicle (EV) charging can result in cruising, congestion, and environmental externalities. Recognizing the business opportunity of offering private parking and charging infrastructure access within multi-unit dwellings (MUDs) during daytime, we model a shared parking and EV charging management system. We maximize the revenue of MUD charging hubs in mixed land use, catering to public demand. Our approach accounts for the objectives of the two stakeholders involved: a demand model is fitted on the choices of EV charging users, and the supply model optimizes the allocation of parking and charging requests in an MUD parking lot. A binary integer linear programming model for the allocation of parking and charging spaces with a rolling horizon is integrated with matching rules that handle both parking and charging requests. In our numerical experiments in a neighborhood of Chicago, Illinois, we estimate the performance of the MUD parking and charging system with metrics that include revenue, number of matchings, and utilization rates. At any given time, MUDs with lower prices attract more charging requests, particularly those of longer duration, resulting in higher revenue and greater charging utilization. Dynamic pricing facilitates a more equitable distribution of requests; as MUD parking lots reach capacity and their fees increase, other MUDs become more competitive, attracting additional requests. Comparing our method against first-come-first-served and optimal-solution benchmarks, we demonstrate our model’s effectiveness in dynamically managing mixed parking and charging demand in MUD charging hubs.

electric vehicle, multi-unit dwelling, charging in↗
DOE OSTI2026

Semi-Analytical Hierarchical Bayesian Inference of Nonlinear Model Structure in Stochastic Dynamics: Applied to Compartmental Models of Infectious Diseases

A Bayesian computational framework for parsimonious inference in stochastic nonlinear dynamical systems is presented. This framework enables the concurrent estimation of system states, time-varying parameters, time-invariant parameters, and the optimal sparsity structure of the model parameters. Because differential equation-based models are often simplified mechanistic or phenomenological representations, robust inference from noisy measurement data requires explicit treatment of model error and uncertainty. Model error and time-varying parameters can be represented as random processes, enabling inference while making minimal assumptions about the underlying sources of discrepancy and variability. Adopting stochastic differential equation representations affords the model significant flexibility, but can also render it susceptible to overfitting during statistical inversion, where the inferred model may track noise rather than the underlying signal. To alleviate the effects of overfitting and to enable the discovery of the optimal sparse representation of the time-invariant parameters, a Bayesian sparse learning algorithm is embedded within the framework. This sparse learning framework adopts an approximate hierarchical Bayesian setting defined by a series of semi-analytical expressions. The model structure inference framework is validated using a stochastic compartmental model for tracking and forecasting active cases of an infectious disease. Compartmental models describe population-level infectious disease dynamics through interactions among population fractions grouped by disease state. Mathematically, such models consist of a system of coupled ordinary differential equations. This example adopts an expressive compartmental model that includes multiple possible interactions between disease states, motivated by early uncertainty surrounding COVID-19 reinfection dynamics and their implications for long-term epidemic forecasting. The sparse learning exercise permits the inference of a priori unknown epidemiological dynamics from simulated public health data, discovering the nested compartmental model that optimizes the trade-off between average data-fit and model complexity. It is shown that inducing sparsity among the model parameters eliminates redundant interactions between compartments, equivalently revealing the optimal coupling structure between differential equations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Blind Modeling Validation Exercises Using the Horizontal Dry Cask Simulator

The U.S. Department of Energy (DOE) established a need to understand the thermal-hydraulic properties of dry storage systems for commercial spent nuclear fuel (SNF) in response to a shift towards the storage of high-burnup (HBU) fuel (> 45 gigawatt days per metric ton of uranium, or GWd/MTU). This shift raises concerns regarding cladding integrity, which faces increased risk at the higher temperatures within spent fuel assemblies present within HBU fuel compared to low-burnup fuel (≤ 45 GWd/MTU). A dry cask simulator (DCS) was built at Sandia National Laboratories (SNL) in Albuquerque, New Mexico to produce validation-quality data that can be used to test the accuracy of the modeling used to predict cladding temperatures. These temperatures are critical to evaluating cladding integrity throughout the storage cycle of commercial spent nuclear fuel. A model validation exercise was previously carried out for the DCS in a vertical configuration. Lessons learned during the previous validation exercise have been applied to a new, blind study using a horizontal dry cask simulator (HDCS). Three modeling institutions – the Nuclear Regulatory Commission (NRC), Pacific Northwest National Laboratory (PNNL), and Empresa Nacional del Uranio, S.A., S.M.E. (ENUSA) – were granted access to the input parameters from the DCS Handbook, SAND2017-13058R, and results from a limited data set from the horizontal BWR dry cask simulator tests reported in the HDCS update report, SAND2019-11688R. With this information, each institution was tasked to calculate peak cladding temperatures and air mass flow rates for ten HDCS test cases. Axial as well as vertical and horizontal transverse temperature profiles were also calculated. These calculations were done using modeling codes (ANSYS/Fluent, STAR-CCM+, or COBRA-SFS), each with their own unique combination of modeling assumptions and boundary conditions. For this validation study, the ten test cases of the horizontal dry cask simulator were defined by three independent variables – fuel assembly decay heat (0.5 kW, 1 kW, 2.5 W, and 5 kW), internal backfill pressure (100 kPa and 800 kPa), and backfill gas (helium and air). The plots provided in Chapter 3 of this report show the axial, vertical, and horizontal temperature profiles obtained from the dry cask simulator experiments in the horizontal configuration and the corresponding models used to describe the thermal-hydraulic behavior of this system. The tables provided in Chapter 3 illustrate the closeness of fit of the model data to the experiment data through root mean square (RMS) calculations of the error in peak cladding temperatures (PCTs), PCT axial locations, axial temperature profiles, vertical and horizontal temperature profiles at two different axial locations, and air mass flow rates for the ten test cases, normalized by the experimental results. The model results are assigned arbitrary model numbers to retain anonymity. Due to the relatively flat axial temperature profiles, small temperature gradients resulted in large deviations of all models’ PCT axial location from the experimental PCT axial location. When the PCT axial location error is excluded in the calculation of the combined RMS of the normalized errors that considers PCT, the temperature profiles, and the air mass flow rates, the model data fits the experimental data to within 5%. When the vault information is excluded, the model data fits the experimental data to within 2.5%. An error analysis was developed further for one model, using the model and experimental uncertainties in each validation parameter to calculate validation uncertainties. The uncertainties for each parameter were used to define quantifiable validation criteria. For this analysis, the model was considered validated for a given comparison metric if the normalized error in that metric divided by the validation uncertainty was less than or equal to 1. When considering the combined RMS of the normalized errors of all metrics divided by their validation uncertainties, the model was found to have satisfied the criterion for model validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

The dark matter halo masses of elliptical galaxies as a function of observationally robust quantities

Context. The assembly history of the stellar component of a massive elliptical galaxy is closely related to that of its dark matter halo. Measuring how the properties of galaxies correlate with their halo mass can therefore help to understand their evolution. Aims. We investigate how the dark matter halo mass of elliptical galaxies varies as a function of their properties, using weak gravitational lensing observations. To minimise the chances of biases, we focus on the following galaxy properties that can be determined robustly: the surface brightness profile and the colour. Methods. We selected 2409 central massive elliptical galaxies (log M*/M ⊙ ≳ 11.4) from the Sloan Digital Sky Survey spectroscopic sample. We first measured their surface brightness profile and colours by fitting Sérsic models to photometric data from the Kilo-Degree Survey (KiDS). We fitted their halo mass distribution as a function of redshift, rest-frame r-band luminosity, half-light radius, and rest-frame u - g colour, using KiDS weak lensing measurements and a Bayesian hierarchical approach. For the sake of robustness with respect to assumptions on the large-radii behaviour of the surface brightness, we repeated the analysis replacing the total luminosity and half-light radius with the luminosity within a 10 kpc aperture, L r, 10 , and the light-weighted surface brightness slope, Γ 10 . Results. We did not detect any correlation between the halo mass and either the half-light radius or colour at fixed redshift and luminosity. Using the robust surface brightness parameterisation, we found that the halo mass correlates weakly with L r,10 and anti-correlates with Γ 10 . At fixed redshift, L r, 10 and Γ 10 , the difference in the average halo mass between galaxies at the 84th percentile and 16th percentile of the colour distribution is 0.00 ± 0.11 dex. Conclusion. Our results indicate that the average star formation efficiency of massive elliptical galaxies has little dependence on their final size or colour. This suggests that the origin of the diversity in the size and colour distribution of these objects lies with properties other than the halo mass.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The GMRT archive atomic gas survey – II. Mass modelling and dark matter halo properties across late-type spirals

Studying the kinematics and mass modelling of galaxies from H i 21 cm data provides valuable insights into the properties of both the baryonic components and the dark matter halo in nearby galaxies. Despite many observational studies, mass modelling of galaxies remains challenging due to different limitations. For example, most of the previous studies involving mass modelling are based on rotation curves derived from 2D velocity fields from H i or H α spectroscopic observation which are often affected by beam smearing and projection effect. However, kinematic modelling done by fitting the ‘Tilted ring model’ to 3D data cube is not affected by these issues. In this study, we present and compare 3D kinematic modelling of a pilot sample of 11 galaxies from the GMRT archive atomic gas survey (GARCIA) using two different publicly available pipelines. We model the observed H i rotation curve using 3.6-μm infrared data and SDSS r-band data for stellar contribution, H i surface density profile for gas, and Navarro–Frenk–White profile for dark matter halo; and employ the Markov chain Monte Carlo optimization method for parameter estimation. Further, to validate our analysis, we revisit important scaling relations, e.g. the M gas –M star relation, M star –M halo relation, M gas –M halo relation and Baryonic Tully–Fisher relation. Here, the scaling relations from our analysis are broadly consistent with that reported in the literature. A larger sample of galaxies from GARCIA in the near future will allow studying these scaling relations in greater details.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Connecting relativistic density functional theory to microscopic calculations

The development of systematic effective field theories (EFTs) for nuclear forces and advances in solving the nuclear many-body problem have greatly improved our understanding of dense nuclear matter and the structure of finite nuclei. For global nuclear calculations, density functional theories (DFTs) have been developed to reduce the complexity and computational cost required in describing nuclear systems. However, DFT often makes approximations and assumptions about terms included in the functional, which may introduce systematic uncertainties compared to microscopic calculations using EFTs. In this work, we investigate possible avenues of improving nuclear DFT using nonlinear relativistic mean-field (RMF) theory. We explore the impact of RMF model extensions by fitting the nonlinear RMF model to predictions of nuclear matter and selected closed-shell nuclei using four successful chiral EFT Hamiltonians. We find that these model extensions are impactful and important in capturing the physics present within chiral Hamiltonians, particularly for charge radii and neutron skins of closed-shell nuclei. However, there are additional effects that are not captured within the RMF model, particularly within the isoscalar sector of RMF theory. Additional model extensions and the reliability of the nonlinear RMF model are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The weakly nonlinear response and nonaffine interpretation of the Johnson–Segalman/Gordon–Schowalter model

We derive new analytical solutions for the non-affine Johnson-Segalman/Gordon-Schowalter (JS/GS) constitutive equation with a general relaxation kernel in medium-amplitude oscillatory shear (MAOS) deformation. The results show time-strain separable (TSS) nonlinearity, therefore providing new physically-meaningful interpretation to the heuristic TSS nonlinear parameter in MAOS. The upper-convected, lower-convected, and corotational Maxwell models are all subsets of the results presented here. The model assumes that the microscale elements causing stress in the material slip compared to the continuum deformation. We introduce a visualization of the non-affine deformation field that acts on stress-generating elements to reinforce the hysical interpretation of the JS/GS class of models. Lastly, a case study is presented where previously published results, from fitting TSS models to MAOS data, can be re-interpreted based on the concept of non-affine motion of the JS/GS framework.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stellar Mass and Stellar Mass-to-light Ratio–Color Relations for Low Surface Brightness Galaxies

We estimate the stellar mass for a sample of low surface brightness galaxies (LSBGs) by fitting their multiband spectral energy distributions (SEDs) to the stellar population synthesis model. The derived stellar masses (log M {sub *}/M {sub ⊙}) span from 7.1 to 11.1, with a mean of log M {sub *}/M {sub ⊙} = 8.5, which is lower than that for normal galaxies. The stellar mass-to-light ratio (γ*) in each band varies little with the absolute magnitude but increases with higher M {sub *}. This trend of γ* with M {sub *} is even stronger in bluer bands. In addition, the γ* for our LSBGs slightly declines from the r band to the longer-wavelength bands. The log γ{sub ∗}{sup j} (j = g, r, i, and z) have relatively tight relations with optical colors of g − r and g − i. Compared with several representative γ*–color relations (MLCRs) from the literature, our MLCRs based on LSBG data are consistently among those literature MLCRs previously defined on diverse galaxy samples, and the existing minor differences between the MLCRs are caused by the differences in the SED model ingredients (including initial mass function, star formation history, and stellar population model), line fitting techniques, galaxy samples, and photometric zero-point, rather than the galaxy surface brightness itself, which distinguishes LSBGs from high surface brightness galaxies. Our LSBGs would be very likely to follow those representative MLCRs previously defined in diverse galaxy populations, if those main ingredients were taken into account.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

SANS quantification of bound water in water-soluble polymers across multiple concentration regimes

Contrast-variation small-angle neutron scattering (CV-SANS) is a widely used technique for quantifying hydration water in soft matter systems, but it is predominantly applied in the dilute regime or for systems with a well-defined structure factor. Here, CV-SANS was used to quantify the number of hydration water molecules associating with three water-soluble polymers with different critical solution temperatures and types of water–solute interactions in dilute, semidilute, and concentrated solution through the exploration of novel methods of data fitting and analysis. Multiple SANS fitting workflows with varying levels of model assumptions were evaluated and compared to give insight into SANS model selection. These fitting pathways ranged from general, model-free algorithms to more standard form and structure factor fitting. In addition, Monte Carlo bootstrapping was evaluated as a method to estimate parameter uncertainty through simulation of technical replicates. The most robust fitting workflow for dilute solutions was found to be form factor fitting without CV-SANS ( i.e. polymer in 100% D 2 O). For semidilute and concentrated solutions, while the model-free approach can be mathematically defined for CV-SANS data, the addition of a structure factor imposes physical constraints on the optimization problem, suggesting that the optimal fitting pathway should include appropriate form and structure factor models. The measured hydration numbers were consistent with the number of tightly bound water molecules associated with each monomer unit, and the concentration dependence of the hydration number was largely governed by the chemistry-specific interactions between water and polymer. Polymers with weaker water–polymer interactions ( i.e. those with fewer hydration water molecules) were found to have more bound water at higher concentrations than those with stronger water–polymer interactions due to the increase in the number of forced water–polymer contacts in the concentrated system. This SANS-based method to count hydration water molecules can be applied to polymers in any concentration regime, which will lead to improved understanding of water–polymer interactions and their impact on materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Does the leaf economic spectrum hold within plant functional types? A Bayesian multivariate trait meta-analysis

The leaf economic spectrum is a widely-studied axis of plant trait variability that defines a trade-off between leaf longevity and productivity. While this has been investigated at the global scale, where it is robust, and at local scales, where deviations from it are common, it has received less attention at the intermediate scale of PFTs. We investigated whether global leaf economic relationships are also present within the scale of plant functional types (PFTs) commonly used by Earth System models, and the extent to which this global-PFT hierarchy can be used to constrain trait estimates. We developed a hierarchical multivariate Bayesian model that assumes separate means and covariance structures within and across PFTs and fit this model to seven leaf traits from the TRY database related to leaf longevity, morphology, biochemistry, and photosynthetic metabolism. Although patterns of trait covariation were generally consistent with the leaf economic spectrum, we found three approximate tiers to this consistency. Relationships among morphological and biochemical traits (SLA, N, P) were the most robust within and across PFTs, suggesting that covariation in these traits is driven by universal leaf construction trade-offs and stoichiometry. Relationships among metabolic traits (R_d, V_{c,max}, J_max) were slightly less consistent, reflecting in part their much sparser sampling (especially for high-latitude PFTs), but also pointing to more flexible plasticity in plant metabolistm. Finally, relationships involving leaf lifespan were the least consistent, indicating that leaf economic relationships related to leaf lifespan are dominated by across-PFT differences and that within-PFT variation in leaf lifespan is more complex and idiosyncratic. Across all traits, these covariance were an important source of information, as evidenced by the improved imputation accuracy and reduced predictive uncertainty in multivariate models compared to univariate models. Ultimately, our study reaffirms the value of studying not just individual traits but the multivariate trait space and the utility of hierarchical modeling for studying the scale dependence of trait relationships.

biodiversity, ecological modeling, ecology, leaf b↗