SEARCH · Engineering Papers

Results for “mining industry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Space Resources and Mining: Current Objectives, Plans, and Missions

Why are Space Resources and Their Use Important? There are many reasons why people and nations want to explore space, and there are many different ways in which space can be explored. A critical interface linking both the ‘why’ and the ‘how’ of space exploration is the identification, extraction, and use of resources in space. In both NASA’s Journey to Mars: Pioneering Next Steps in Space Exploration released in October of 2015 and the Global Exploration Roadmap released in August 2013, the ability to find, quantify, extract, process, and use space resources was identified as a critical objective by NASA and over 14 other space agencies for achieving affordable and sustainable human exploration beyond Earth’s orbit, encouraging and creating new commercial entities and markets based on space activities, and increasing the terrestrial economy and quality-of-life benefits for all humankind. Robotic and especially human space exploration up to this point in time can be considered to be ‘Earth reliant’ in that everything needed to support and enable the mission is launched from Earth. The past Apollo missions to the Moon and the International Space Station currently in orbit above the Earth all rely on hardware, habitats, power, transportation, and life support consumables sent from Earth to keep the crew alive and working. As the distance from Earth increases, the cost of transportation and the risks due to failures and logistics disruptions also increases. By using resources found at the site of exploration to make mission critical consumables (such as propellants, fuel cell reactants and life support commodities), spare parts, and infrastructure needed to support surface activities (such as landing pads, roads, habitats/shelters, and power/thermal systems) commonly referred to as In Situ Resource Utilization, a significant amount of launch mass and cost can be saved and risk reduced. The ability to do these things also changes how exploration is performed from Earth Reliant to NASA’s goal of ‘Earth Independent’ exploration. After the US Apollo program was over, people began to recognize that it had been an inspiration for a generation of young students to go into Science, Technology, Engineering and Math (STEM) fields, and that the US industry and economy had significantly grown and lived off these students and the technological advances made to achieve these missions for decades. Space exploration should no longer be focused solely on scientific advancement or national pride, but for economic growth and population standard of living advancement. Considering the economic value of human exploration and how it could expand the economy of the US was brought to full light in a speech by John Marburger, the director of US Office of Science and Technology Policy under George W Bush at the Goddard Symposium in 2006. In his speech he highlighted that the ultimate goal was not to just Explore space but to Use space for the benefit of mankind. He further stated that the use of off-planet resources, in this case from the Moon, should be a critical architectural consideration for human space exploration to make it more affordable and sustainable. This could be achieved in two ways. The first is to start by encouraging and commercializing the extraction and production of transportation and life support related products from space resources, which could than lead to other resource uses once an affordable transportation architecture is established. The second is to encourage the spin-in of terrestrial technologies into space applications and spin-off of space technologies into terrestrial applications to increase the efficiency and profitability of terrestrial industries.

Sanders, Gerald B.↗

DOE OSTI2024

Recovery of Oxpure 612C-50 Coconut Carbon Particles Using Bump Arrays

Cyanide is used to leach gold from crushed ore (solid matrix) into a gold cyanide solution. The gold is extracted from the cyanide solution by adsorption onto activated carbon. The gold extraction process occurs when the activated coconut carbon is placed into tanks that contain the gold cyanide solution either in a batch process or into a continuous flow circuit. The coconut carbon is then removed from the solution for gold recovery. The use of the mesofluidic separation system (a deterministic lateral displacement system) can significantly reduce costs and waste generated from the process of removing the coconut carbon from the solution. In the coconut carbon recovery process used at many gold mines in Nevada, the gold is attached to carbon particles that are still in the cyanide liquor. The mesofluidic system can rapidly remove the gold bearing carbon particles from the cyanide liquor quickly and with no operating costs. The benefits include: • Reduce operational costs related to filtration and hydro-cyclones • Reduced acid usage for the elution gold stripping phase as only 25% of the fluids will follow the carbon particles to the final express lane when two mesofluidic systems are used in series This alternative particle removal techniques would be advantageous. A promising technique for removing larger particles from slurries is mesofluidic separation, similar to deterministic lateral displacement arrays or “bump” arrays [1] but operates at much larger flow rates. As described by Pease, et al. [2], “Bump arrays in deterministic lateral displacement devices separate large particles from small particles using arrays of staggered posts. Large particles, defined as those with radii larger than the distance between the edge of a post and the stagnation streamline from the next downstream post, must bump toward one side of the device, whereas particles smaller than this distance slalom from entrance to exit without net lateral displacement.” Unlike filters or sieves, the posts in the arrays that cause separation do not block or occlude particle flow but work because particles go around the posts. Unlike hydrocyclones separation, separation is not driven by particle density, because gravitational forces are unimportant to mesofluidic separation. Burns, et al., and Pease, et al., have shown that particles may be separated from complex suspensions, under turbulent flow conditions, and at industrially important flow rates [3-5]. They have also recently shown that mesofluidic devices may be arranged in series to increase separation performance [6]. In this paper, we evaluate the mesofluidic system for the separation of commercial OxPure GR 612 Charred Coconut shell particles as a proof of principle test for the rapid separation using the 1500 micron cut mesofluidic separator. We first describe the experimental system and conditions. We then present the experimental results. [1] Huang, L.R., E.C. Cox, R.H. Austin, J.C. Sturm. 2004. Continuous particle separation through deterministic lateral displacement. Science, 304, 987–990. https://doi.org/10.1126/science.1094567. [2] Pease L.F., J.A. Bamberger, C.A. Burns, and M.J. Minette. 2021. Large Particle Separation from Non-Newtonian Slurries using Bump Arrays. In Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021-65904, V003T08A023. New York, New York: ASME. doi:10.1115/FEDSM2021-65904 [3] Burns C.A., T.G. Veldman, J. Serkowski, R.C. Daniel, X.-Y. Yu, M.J. Minette, L.F. Pease. 2021. Mesofluidic separation versus dead-end filtration. Separation and Purification Technology, 254, 117256. https://doi.org/10.1016/j.seppur.2020.117256. [4] Pease L.F., J.E. Serkowski, T.G. Veldman, J. Williams, X.-Y. Yu, M.J. Minette, J.A. Bamberger, C.A. Burns. 2021. Can Bump Arrays Separate Particles from Turbulent Flows?. In Proceedings of the ASME 2021 Fluids Engineering Division Summer Meeting FEDSM2021-67696, V003T08A024. New York, New York: ASME. doi:10.11

mesofluidic separation, slurry, bump array↗

DOE OSTI2025

Reactive CO 2 capture and mineralization of magnesium hydroxide to produce hydromagnesite with inherent solvent regeneration

Valorization of multiple low value streams including CO 2 emissions and magnesium-hydroxide bearing mine tailings to produce magnesium carbonate through reactive CO 2 capture and mineralization provides a less explored opportunity to manage several gigatons of CO 2 emissions. To resolve the feasibility of converting magnesium hydroxide to magnesium carbonate through reactive CO 2 capture and mineralization, CO 2 capture solvents such as sodium glycinate are harnessed to capture CO 2 and react directly with Mg(OH) 2 to produce hydromagnesite (Mg 5 [(CO 3 )4(OH) 2 ]·4H 2 O). This approach eliminates the energy-intensive step of producing high purity CO 2 associated with regenerating the solvent, and redissolving CO 2 to produce magnesium carbonate. Interestingly, while temperatures below 50 °C facilitate CO 2 capture, the mineralization kinetics are slow. However, at higher temperatures, accelerated carbon mineralization is favored by the faster kinetics of Mg(OH) 2 dissolution and precipitation of magnesium carbonate. Reacting Mg(OH) 2 at 90 °C with 15 wt% solids in the presence of 2.5 M sodium glycinate after 3 hours under well-stirred conditions results in an extent of carbon mineralization of 75.5%. The theoretical maximum extent of carbon mineralization when hydromagnesite is formed is 80%. Pre-loading CO 2 on the solvent is also an effective approach to ensure that sufficient CO2 is available for reactive CO 2 capture and mineralization, particularly when dilute CO 2 and N 2 mixtures are used. Higher extents of carbon mineralization are associated with an increase in the particle size and a reduction in the cumulative pore volume. These insights unlock the feasibility of harnessing reactive CO 2 capture and mineralization as a pathway to convert magnesium-hydroxide bearing resources into industrially relevant magnesium carbonate products.

Reactive CO2↗

DOE OSTI2026

Accelerating Laboratory-Based, All-Solid-State Battery Research and Development: Industrially Relevant Small-Batch Dry-Processing, Small and Low-Cost Test Fixtures, and Short-Tolerant Separators

This work presents improvements to mixing (for dry-processed electrodes), separator robustness, and cell testing jigs for all-solid-state batteries (ASSBs). These developments combine synergistically to enable rapid research and development of ASSB catholytes. A mechanical "kneader" is designed and built which emulates the mixing and fibrillation of poly-tetrafluoroethylene binder that occurs in industrially relevant twin-screw extruders. A modest improvement in the mixing and dispersion catholyte materials is observed using micro-resolution X-ray computed tomography (X-ray CT). Catholytes are paired with an In-metal anode and separated by a novel, dual-layer, polyaramid-fiber-supported, sulfide-solid electrolyte (Li6 PS5 Cl) separator. This separator achieves high short tolerance which enabled a 95% success rate across 20 attempted cells and to date over 100 successful cells have been built. ASSBs were tested in a 2032 coin-cell format. Simultaneous cycling of a large number of cells is further enabled by a compact and low cost (~ 38 USD per jig) pressure application jig of which 100 have been constructed to date. The utility of these advances is demonstrated through a brief study on the effect cathode-side conductive carbon and current collector type has on capacity and rate performance.

25 ENERGY STORAGE↗

NASA NTRS1991

Oxygen extraction from lunar soil by fluorination

Mining and processing of lunar material could possibly lead to more cost-efficient scenarios for permanent presence of man in space and on the Moon. Production of oxygen for use as propellant seems especially important. Different candidate processes for oxygen-extraction from lunar soil were proposed, of which the reduction of ilmenite by hydrogen was studied most. This process, however, needs the concentration of ilmenite from lunar regolith to a large extent and releases oxygen only with low efficiency. Another possibility - the fluorination method - which works with lunar bulk material as feedstock is discussed. Liberation of oxygen from silicate or oxide materials by fluorination methods has been applied in geoscience since the early sixties. The fact that even at moderate temperatures 98 to 100 percent yields can be attained, suggests that fluorination of lunar regolith could be an effective way of propellant production. Lunar soil contains about 50 percent oxygen by weight which is gained nearly completely through this process as O2 gas. The second-most element Si is liberated as gaseous SiF4. It could be used for production of Si-metal and fluorine-recycling. All other main elements of lunar soil will be converted into solid fluorides which also can be used for metal-production and fluorine-recycling. Preliminary results of small scale experiments with different materials are discussed, giving information on specific oxygen-yields and amounts of by-products as functions of temperature. These experiments were performed with an already existing fluorine extraction and collection device at the University of Bonn, normally used for determination of oxygen-isotopic abundances. Optimum conditions, especially concerning energy consumption, are investigated. Extrapolation of the experimental results to large industrial-type plants on the Moon is tried and seems to be promising at first sight. The recycling of the fluorine is, however, crucial for the process. It might be achieved by means of electrolysis. This needs further investigation. The technical problem of transport and handling of the toxic and corrosive fluorine seems to be solvable and could be done by inert storage vessels.

Seboldt, W.↗

DOE OSTI2024

Is Clean Hydrogen Production a Good Fit for Questa? (Final Economic Impact Results) [Slides]

The Village of Questa, New Mexico is aiming to become a regional clean energy hub with robust and diverse employment opportunities for the local community supported by the energy sector and by other businesses inspired or attracted by abundant clean energy, outdoor recreation, and cultural opportunities. A coalition of stakeholders in the Village of Questa, comprising the Village, Kit Carson Electric Cooperative (KCEC), Questa Economic Development Fund, and Chevron, is exploring options to develop hydrogen production facilities as an opportunity to create jobs, provide reliable clean energy, and utilize former mine resources. Questa is home to a molybdenum mine owned by Chevron that closed in 2014. Several residents in Questa and surrounding communities lost their jobs when the mine closed and transitioned from active operations into environmental remediation. Although remediation efforts have been ongoing since 2014 and are expected to continue for at least 16 more years, the number of jobs with Chevron is much smaller now than it was before the closure. Between available workforce, brownfield land, and water rights formerly supporting mine operations but now in a transition period, there are considerable local resources that could be directed toward clean energy generation. Questa's electricity supply is already 100% solar during daylight hours thanks to Kit Carson Electric Cooperative's (KCEC's) strategic decision-making and partnering over the last decade. Now, Questa, KCEC, and Chevron are exploring the potential costs and benefits of siting an electrolytic hydrogen production facility and additional solar photovoltaic (PV) capacity in Questa to further advance the region's clean energy economy. In this report, we estimated the potential economic impacts (i.e., jobs, value added, gross output, tax revenue) of constructing and operating a combined hydrogen (32 MW polymer electrolyte membrane electrolizer + 7.5 MW fuel cell) and solar facility (22.5 MW) in the Village of Questa, as well as the resulting economic spillovers to Taos County and the state of New Mexico. We employ an input-output model that leverages IMPLAN's economic data for the region complemented by construction and operating expenses estimated by NREL and feedback from the local coalition to evaluate the direct, indirect and induced effects of the project construction (transient impacts) and operation (more permanent impacts). Based on the area's average trade profile, feedback from the coalition and current market conditions, these projects are expected to support 487 full-time equivalent jobs during construction, generating $\$24$ million in income for those workers and $\$82$ million in local economic activity in the state. Of those jobs, 106 are expected to be construction sector jobs. These investments are also estimated to add $\$36.5$ million to New Mexico's gross state product (GSP). In the Village of Questa, we estimate 16 jobs will be supported in construction and transportation industries, generating $\$0.9$ million in earnings. In Taos County, the construction phase is expected to support 285 jobs primarily in construction and professional services, while manufacturing jobs dominate the results for the Rest of New Mexico. The Village is also estimated to receive $\$0.9$ million in tax revenue from the construction phase alone. Once in operation, the project continues to impact the state and Questa. Around 20 jobs (full-time equivalent for each year of operation) are supported across New Mexico, with approximately 11 directly employed in Questa by both facilities. The total annual local economic activity supported by ongoing operations is just over $\$1.3$ million/yr, generating $\$1.6$ million/yr in additional income in the state. Annual operations are estimated to add $\$2.1$ million to the state's GSP. The Village is expected to receive around $\$43,000$/yr in tax revenue. Impacts vary significantly depending on which businesses are supplying materials, equipment and services, and where construction workers reside. Choosing local suppliers will most benefit Questa and the New Mexico economy, adding up to 500 jobs during construction and 13 long-term jobs. Local and state governments may consider ways to incentivize local businesses in order to maximize economic benefits.

08 HYDROGEN↗

DOE OSTI2024

Is Clean Hydrogen Production a Good Fit for Questa? Final Economic Impact Results

08 HYDROGEN↗

DOE OSTI2021

CO 2 utilization in built environment via the P CO 2 swing carbonation of alkaline solid wastes with different mineralogy

Carbon mineralization to solid carbonates is one of the reaction pathways that can not only utilize captured CO 2 but also potentially store it in the long term. In this study, the dissolution and carbonation behaviors of alkaline solid wastes (i.e., waste concrete) was investigated. Concrete is one of the main contributors to a large carbon emission in the built environment. Thus, the upcycling of waste concrete via CO 2 utilization has multifaceted environmental benefits including CO 2 emission reduction, waste management and reduced mining. Unlike natural silicate minerals such as olivine and serpentine, alkaline solid wastes including waste concrete are highly reactive, and thus, their dissolution and carbonation behaviors vary significantly. Here, both conventional acid (e.g., hydrochloric acid) and less studied carbonic acid (i.e., CO 2 saturated water) solvent systems were explored to extract Ca from concrete. Non-stoichiometric dissolution behaviors between Ca and Si were confirmed under far-from-equilibrium conditions (0.1 wt% slurry density), and the re-precipitation of the extracted Si was observed at near-equilibrium conditions (5 wt% slurry density), when the Ca extraction was performed at a controlled pH of 3. These experiments, with a wide range of slurry densities, provided valuable insight into Si re-precipitation phenomena and its effect on the mass transfer limitation during concrete dissolution. Next, the use of the partial pressure of CO 2 for the pH swing carbon mineralization process was investigated for concrete, and the results were compared to those of Mg-bearing silicate minerals. In the P CO 2 swing process, the extraction of Ca was significantly limited by the precipitation of the carbonate phase (i.e., calcite), since CO 2 bubbling could not provide a low enough pH condition for concrete–water–CO 2 systems. Furthermore, this study showed that the two-step carbon mineralization via P CO 2 swing, that has been developed for Mg-bearing silicate minerals, may not be viable for highly reactive Ca-bearing silicate materials (e.g., concrete). The precipitated calcium carbonate (PCC) derived from waste concrete via a pH swing process showed very promising results with a high CO 2 utilization potential as an upcycled construction material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Analysis of the Selective Flotation of Elemental Gold from Pyrite Using Diisobutyl Monothiophosphate

The gold contained in copper ores is an important resource for the gold industry. In some cases, elemental gold is present and can be recovered by selective flotation. It has been reported that the gold grade and recovery can be increased, without sacrificing the copper recovery, by replacing AERO 3477 (diisobutyl dithiophosphate (DTP)) with AERO 7249 (mixture of diisobutyl monothiophosphate (MTP) and diisobutyl dithiophosphate (DTP)) as the main collector. The fundamental understanding of the improvement in selectivity with the addition of MTP in the flotation of elemental gold from pyrite is limited and is the subject of this paper. In this regard, the hydrophobicity and selectivity of DTP and MTP in the flotation of pyrite and gold are compared and discussed. Density functional theory (DFT) was used to examine the electron density, reactivity, highest occupied molecular orbital (HOMO), and lowest unoccupied molecular orbital (LUMO) of the MTP and DTP collectors. The interaction energies for the adsorption of MTP and DTP from fresh pyrite, oxidized pyrite and gold surfaces were calculated and discussed with respect to the experimental results reported in the literature. Molecular dynamics simulation (MDS) was used to examine the adsorption state of MTP and DTP on the pyrite (100) and Au (111) surfaces.

58 GEOSCIENCES↗

DOE OSTI2026

Advancing extreme pulsed lasers through measurements: summary of the pulsed laser metrology workshop

In this report we present consensus findings produced during the pulsed laser metrology (PLM) workshop (Boulder, CO, USA, August 2025). The workshop was a meeting of 35 scientists from private industry, academia, and U.S. government to compile a list of the metrology needs to support extreme pulsed laser development and implementation. We define ‘extreme pulsed lasers’ loosely as those with peak powers above 1 TW or multi-Joule pulse energies. Such lasers are being increasingly used and investigated for use in high energy particle acceleration, short wavelength radiation generation, laser-based fusion, etc. The rapid growth of these fields and the proliferation of extreme lasers for these applications, coupled with the extreme electric fields they generate and relative scarcity of such lasers, presents unique challenges to accuracy in their measurement. The PLM workshop was a two-day event designed to hear from users, developers, and researchers on the current state of optical metrology associated with these extreme pulsed lasers. The goal was to identify the most important measurement challenges limiting development and implementation of these lasers in practical applications. We report here the conclusions and recommendations of this workshop. The hope is that this document will become the first of many iterations which track the status of measurement needs supporting extreme pulsed lasers.

Lasers↗

DOE OSTI2025

BACKFLIP: A Comparison of Market-Benchmark Backsheet Technologies to Novel Non-Fluoro-Based Coextruded Materials and Their Correlation and Impact on PV Module Degradation Rates: Final Results of the Study at 4000 Hours or 2 Years

As the photovoltaic (PV) industry is rapidly expanding around the world, there has been an increasing interest in extending the lifespan of PV modules. Concern has also emerged regarding the recyclability of modules and their component materials, including fluoropolymer-based backsheets. Laminated polyethylene-terephthalate (PET) core backsheets have traditionally been used in the PV industry, but new, co-extruded polyolefin (PO) backsheets show promise as an improved alternative. Mini-module and coupon samples of seven different backsheets (made of layers including contemporary PET and fluoropolymers, novel PO, and polyamide (PA) materials) were run through hygrometric- or UV photolytic-accelerated aging to identify and better understand each material's degradation modes and the backsheets' field reliability. In addition to the artificial aging, the natural weathering methods used in this study are described. The comprehensive set of chemical, mechanical, and structural characterizations at intermittent read points in this study is presented, including: visual appearance and color; gloss; mechanical tensile testing; I-V performance; electroluminescence (EL) imaging; dielectric breakdown; FTIR-chemical structure; X-ray-polymer structure (WAXS); and DSC-crystalline content. After 4000 h of accelerated aging or 2y of outdoor aging, a strong correlation occurs between initial physical characteristics (mechanical tensile test) and operating performance (EL and I-V characteristics).

14 SOLAR ENERGY↗

DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗

NASA NTRSDate not supplied

Summary of the First AIAA Stability and Control Prediction Workshop

Results from the First AIAA Stability and Control Prediction Workshop are summarized in this paper. The workshop series was developed in support of three primary objectives: (1) to establish best practices for the prediction of stability and control derivatives using industry-standard Computational Fluid Dynamics (CFD) solvers, (2) to provide an impartial forum for evaluating the effectiveness of Reynolds-averaged-Navier-Stokes- and Detached-Eddy-Simulation-based modeling techniques, and (3) to identify areas in need of additional research and development. To address these objectives, the inaugural workshop focused on generating computational aerodynamic predictions for the ONERA version of the NASA/Boeing Common Research Model. The configuration includes the wing, body, horizontal tail, and a vertical tail designed by ONERA. While longitudinal wind tunnel test data for the model had been previously documented, unpublished lateral test data at small sideslip angles provided a unique opportunity for participants to generate blind computational predictions for wind tunnel data comparisons. Additional test cases included assessments of the Mach number effect on static lateral/directional stability and the impact of the wind tunnel sting on longitudinal stability. Participants were invited to generate solutions using two workshop-provided series of structured overset and unstructured grids, in addition to any participant custom grids of interest. Total and component-level breakdowns for the force and moment coefficients for each test case are presented, as well as sectional pressure distribution data on the wing and tail components, to assess the agreement between several different Reynolds-averaged Navier-Stokes CFD solvers.

CFD↗

DOE OSTI2020

Powering the Blue Economy: Progress Exploring Marine Renewable Energy Integration With Ocean Observations

The blue economy is a dynamic and rapidly growing movement that captures the interplay between economic, social, and ecological sustainability of the ocean and encompasses numerous maritime sectors and activities (e.g., commerce and trade; living resources; renewable energy; minerals, materials, and freshwater; and ocean health and data). The demand for ocean data to inform scientific, risk reduction, and national security needs is leading to a large increase in the number of deployed ocean observation and monitoring systems, most of which require increased power. Because ocean observation systems are often placed in remote locations, they primarily rely on energy storage (or in some cases in situ energy generation) to power instruments and equipment, which imposes limits on sampling rates, deployment times, and spatiotemporal resolution of data. The U.S. Department of Energy Water Power Technologies Office is exploring the potential for marine renewable energy (MRE) devices (largely wave and tidal energy converters) to provide power to support multiple blue economy opportunities. A portion of these opportunities focus on power at sea markets for providing power in off-grid and offshore locations to support a variety of ocean-based activities, including ocean observation and navigation, underwater vehicle charging, marine aquaculture, marine algae farming, and seawater mining. Initially, research has focused on better understanding how and where MRE can provide a consistent source of reliable power to extend ocean observing missions, including operation of autonomous underwater vehicles. Online surveys as well as phone and inperson interviews were conducted with experts in the field of ocean observing systems and observatories to gather end-user requirements, determine energy needs, identify opportunities for codevelopment, and pinpoint constraints for MRE to meet those needs. The surveys and interviews provided feedback on the potential for powering devices and vehicles using MRE, including identifying common themes and challenges that will inform foundational research and development steps needed to advance the integration of MRE with ocean observing systems. In most cases, additional power generation on the order of watts was identified as significantly beneficial to enhancing ocean observations capabilities.

marine renewable energy, powering the blue economy↗

DOE OSTI2025

Insights into the Complexation of Actinides by Diethylenetriaminepentaacetic Acid from Characterization of the Americium(III) Complex

Diethylenetriaminepentaacetic acid (DTPA) is a frequently used chelator in the nuclear and medical industries, especially for the complexation of trivalent actinides. However, structural data on these complexes in the solid-state have long remained elusive. Herein, a detailed structural analysis of the presented crystal structures of [C(NH 2 ) 3 ] 4 [Nd(DTPA)] 2 · n H 2 O and [C(NH 2 ) 3 ] 4 [Am(DTPA)] 2 · n H 2 O, where [C(NH 2 ) 3 ] + is guanidinium, details the subtle differences in the Lewis acidity between a lanthanide/actinide pair of similar ionic sizes. Contractions in nitrogen–metal bond lengths between neodymium(III) and americium(III) were observed, while the metal–oxygen bonds remained relatively consistent, highlighting the marginal favorability for actinide complexation over the lanthanides with moderately soft N-donors. Spectroscopic analysis shows significant splitting of many transitions and relatively strong electronic interactions with traditionally low-intensity transitions in the americium complex, as is demonstrated in the 7 F 0 → 7 F 5 transitions. Pressure-induced spectroscopic analysis showed surprisingly little effect on the americium complex, with 5 f →5 f transitions either not shifting or marginally shifting from 2 to 3 nm at 11.93 ± 0.06 GPa─atypical of a soft, N-donor americium complex under pressure. Finally, large voids occupied by water molecules in between the complexes within the crystal structure may be responsible for the lack of pressure response in the 5 f →5 f transitions.

absorption spectroscopy↗

DOE OSTI2020

Separation of Radionuclides from a Rare Earth-Containing Solution by Zeolite Adsorption

The increasing industrial demand for rare earths requires new or alternative sources to be found. Within this context, there have been studies validating the technical feasibility of coal and coal byproducts as alternative sources for rare earth elements. Nonetheless, radioactive materials, such as thorium and uranium, are frequently seen in the rare earths’ mineralization, and causes environmental and health concerns. Consequently, there exists an urgent need to remove these radionuclides in order to produce high purity rare earths to diversify the supply chain, as well as maintain an environmentally-favorable extraction process for the surroundings. In this study, an experimental design was generated to examine the effect of zeolite particle size, feed solution pH, zeolite amount, and contact time of solid and aqueous phases on the removal of thorium and uranium from the solution. The best separation performance was achieved using 2.50 g of 12-µm zeolite sample at a pH value of 3 with a contact time of 2 h. Under these conditions, the adsorption recovery of rare earths, thorium, and uranium into the solid phase was found to be 20.43 wt%, 99.20 wt%, and 89.60 wt%, respectively. The Freundlich adsorption isotherm was determined to be the best-fit model, and the adsorption mechanism of rare earths and thorium was identified as multilayer physisorption. Further, the separation efficiency was assessed using the response surface methodology based on the development of a statistically significant model.

58 GEOSCIENCES↗

DOE OSTI2025

Secure biosystems design in Saccharomyces cerevisiae establishes effective biocontainment strategies and mechanisms of escape

The widespread application of recombinant DNA and synthetic biology approaches for microbial metabolic engineering pursuits has motivated the development of biocontainment strategies, targeting safe and secure deployment of genetically modified microorganisms (GMMs). However, the design rules and mechanistic drivers governing biocontainment efficacy, as well as impacts of biocontainment upon microbial fitness, remain to be comprehensively evaluated, hindering predictive design and application of these strategies. We have developed a platform for high-resolution analysis of a transactivated kill switch in laboratory and industrial strains of Saccharomyces cerevisiae to assess modes of biocontainment escape and establish design rules for development of kill switch systems in diverse microbes. A camphor-regulated, RelE toxin system was systematically deployed to assess the impacts of differential kill switch copy number and ploidy in laboratory vs industrial strains. CRISPR-mediated integration of the biocontainment system at various loci revealed rapid escape events driven, in part, by mutations to both the Cam-transactivator (cam-TA) and RelE toxin. Genetic engineering enabled recapitulation of escape phenotypes, confirming mechanisms of escape and establishing structure-function relationships in the cam-TA system. Interestingly, genomic resequencing of escape mutants also revealed a series of off-target mutations, implicating additional modes of kill switch escape. Multi-copy integration of the kill switch system mitigated these effects by orders of magnitude, without compromising the biosynthetic capacity of the microbes, but proved insufficient to establish sustained biocontainment. The resultant data define a series of key design rules for next-generation biocontainment strategies and add to a growing foundational knowledge base targeting establishment of secure biosystems designs.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRSDate not supplied

NASA Kennedy Space Center Swamp Works 10th Anniversary: Innovative Research & Technology Development Summary

Kennedy Space Center’s (KSC) Swamp Works, provides government and commercial space ventures with the technologies required for working and living on the surfaces of the Moon or other planets and bodies in our solar system. The Swamp Works team establishes rapid, innovative and cost-effective exploration mission solutions through leveraging of partnerships across NASA, industry and academia. Concepts start small and build up fast, with lean development processes and a hands-on approach. Testing is performed in early stages to drive design improvements and progressively increase Technology Readiness Levels (TRL). Swamp Works provides concepts, architecture studies and trades, designs, data, technology development, technology demonstration hardware, flight hardware, testing, flight support and knowledge in support of the development of surface systems. It consists of several teams with associated laboratories and test capabilities. The Granular Mechanics and Regolith Operations (GMRO) Laboratory and the Electrostatics and Surface Physics Laboratory (ESPL) are co-located in the Engineering Development Lab (EDL) facility high bay. The Applied Chemistry Lab (ACL) is in an adjacent facility and other KSC labs are being influenced by the innovation methods pioneered at the Swamp Works. The Swamp Works was founded in January 2013 by a group of scientists and engineers at KSC with the over-arching vision of expanding humanity and civilization into the solar system by the use of space resources via advanced technology. Ultimately, this will create a solar system economy that will improve the human condition due to the abundance of energy and resources. This paper will summarize the projects and technology development that have been performed by the Swamp Works to celebrate its 10th Anniversary of innovation success.

Robotic Mining↗