Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maximum principle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Axial and torsional fatigue behavior of Waspaloy

The cyclic flow response and crack growth behavior of Waspaloy at room temperature and 650 C under tensile loading and torsional loading was studied, for two conditions of Waspaloy: fine grain, large gamma prime size; coarse grain, small gamma prime size. The fine grain material showed 5 to 10 percent hardening after about 10 percent of life, with sequent softening to failure at both themperature levels. The coarse grain material showed either stable response or monotonic softening to failure. Early crack initiation was observed on planes of maximum shear, with eventual branching to principle planes under torsional loading; cracks were always normal to load axis under tensile loading. Also, crack paths were intergranular at 650 C, mostly transgranular at room temperature.

Zamrik, S.↗

Reliability analysis of continuous fiber composite laminates

This paper describes two methods, the maximum distortion energy (MDE) and the principle of independent action (PIA), developed for the analysis of the reliability of a single continuous composite lamina. It is shown that, for the typical laminated plate structure, the individual lamina reliabilities can be combined in order to produce the upper and the lower bounds of reliability for the laminate, similar in nature to the bounds on properties produced from variational elastic methods. These limits were derived for both the interactive and the model failure considerations. Analytical expressions were also derived for the sensitivity of the reliability limits with respect to changes in the Weibull parameters and in loading conditions.

Thomas, David J.↗

Structural organization of the spongy mesophyll

Summary Many plant leaves have two layers of photosynthetic tissue: the palisade and spongy mesophyll. Whereas palisade mesophyll consists of tightly packed columnar cells, the structure of spongy mesophyll is not well characterized and often treated as a random assemblage of irregularly shaped cells. Using micro‐computed tomography imaging, topological analysis, and a comparative physiological framework, we examined the structure of the spongy mesophyll in 40 species from 30 genera with laminar leaves and reticulate venation. A spectrum of spongy mesophyll diversity encompassed two dominant phenotypes: first, an ordered, honeycomblike tissue structure that emerged from the spatial coordination of multilobed cells, conforming to the physical principles of Euler’s law; and second, a less‐ordered, isotropic network of cells. Phenotypic variation was associated with transitions in cell size, cell packing density, mesophyll surface‐area‐to‐volume ratio, vein density, and maximum photosynthetic rate. These results show that simple principles may govern the organization and scaling of the spongy mesophyll in many plants and demonstrate the presence of structural patterns associated with leaf function. This improved understanding of mesophyll anatomy provides new opportunities for spatially explicit analyses of leaf development, physiology, and biomechanics.

3D↗

Application of Markov chain model to daily maximum temperature for thermal comfort in Malaysia

The Markov chain’s first order principle has been widely used to model various meteorological fields, for prediction purposes. In this study, a 14-year (2000-2013) data of daily maximum temperatures in Bayan Lepas were used. Earlier studies showed that the outdoor thermal comfort range based on physiologically equivalent temperature (PET) index in Malaysia is less than 34°C, thus the data obtained were classified into two state: normal state (within thermal comfort range) and hot state (above thermal comfort range). The long-run results show the probability of daily temperature exceed TCR will be only 2.2%. On the other hand, the probability daily temperature within TCR will be 97.8%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Function of Tetrahedral ZnS 3 O Building Blocks in the Formation of SrZn 2 S 2 O: A Phase Matchable Polar Oxysulfide with a Large Second Harmonic Generation Response

Single crystals of a new zinc oxysulfide SrZn 2 S2O were grown in a eutectic KF-KCl flux and the structure was determined by single-crystal X-ray diffraction. SrZn 2 S 2 O crystallizes in the non-centrosymmetric polar space group Pmn2 1 with lattice parameters of a = 3.87440(10) Å, b = 9.9847(3) Å, and c = 6.0916(2) Å. In the crystal structure, close-packed corrugated double layers of ZnS3O tetrahedra, which are derived from the wurtzite structure, are vertically separated by Sr 2+ ions. In addition, the O/S anion ordered arrangement in each close-packed layer yields two distinct orientations of the Zn-centered tetrahedra. The crystals of SrZn 2 S 2 O are colorless and transparent and the oxysulfide has a band gap of 3.86 eV, based on UV-vis-NIR diffuse reflectance measurements. Thermogravimetric measurements showed that SrZn 2 S 2 O is stable up to 650 °C in O 2 gas atmosphere. First-principle calculations indicate that the valence band maximum is mainly composed of O-2p and S-3p states, whereas the conduction band minimum is derived from Zn-4s, Zn-4p, and Sr-4d states. The calculated band dispersion reveals a direct band gap corresponding to a transition between S-3p and Zn-4s energy levels. Second harmonic generation (SHG) measurements determined that SrZn 2 S 2 O is phase matchable with twice the SHG intensity of potassium dihydrogen phosphate (KDP) in contrast to CaZnSO with similar ZnS 3 O building units, which exhibits non-phase matching behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A synchronized emissive probe for time-resolved plasma potential measurements of pulsed discharges

A pulsed emissive probe technique is presented for measuring the plasma potential of pulsed plasma discharges. The technique provides time-resolved data and features minimal disturbance of the plasma achieved by alternating probe heating with the generation of plasma. Time resolution of about 20 ns is demonstrated for high power impulse magnetron sputtering (HIPIMS) plasma of niobium in argon. Spatial resolution of about 1 mm is achieved by using a miniature tungsten filament mounted on a precision translational stage. Repeated measurements for the same discharge conditions show that the standard deviation of the measurements is about 1-2 V, corresponding to 4%-8% of the maximum plasma potential relative to ground. The principle is demonstrated for measurements at a distance of 30 mm from the target, for different radial positions, at an argon pressure of 0.3 Pa, a cathode voltage of -420 V, and a discharge current of about 60 A in the steady-state phase of the HIPIMS pulse.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sequential desorption energy of hydrogen from nickel clusters

We report reversible Hydrogen adsorption on Nickel clusters, which act as a catalyst for solid state storage of Hydrogen on a substrate. First-principles technique is employed to investigate the maximum number of chemically adsorbed Hydrogen molecules on Nickel cluster. We observe a maximum of four Hydrogen molecules adsorbed per Nickel atom, but the average Hydrogen molecules adsorbed per Nickel atom decrease with cluster size. The dissociative chemisorption energy per Hydrogen molecule and sequential desorption energy per Hydrogen atom on Nickel cluster is found to decrease with number of adsorbed Hydrogen molecules, which on optimization may help in economical storage and regeneration of Hydrogen as a clean energy carrier.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimal Ge/SiGe nanofin geometries for hole mobility enhancement: Technology limit from atomic simulations

We use first principles simulations to engineer Ge nanofins for maximum hole mobility by controlling strain tri-axially through nano-patterning. Large-scale molecular dynamics predict fully relaxed, atomic structures for experimentally achievable nanofins, and orthogonal tight binding is used to obtain the corresponding electronic structure. Hole transport properties are then obtained via a linearized Boltzmann formalism. This approach explicitly accounts for free surfaces and associated strain relaxation as well as strain gradients which are critical for quantitative predictions in nanoscale structures. We show that the transverse strain relaxation resulting from the reduction in the aspect ratio of the fins leads to a significant enhancement in phonon limited hole mobility (7× over unstrained, bulk Ge, and 3.5× over biaxially strained Ge). Maximum enhancement is achieved by reducing the width to be approximately 1.5 times the height and further reduction in width does not result in additional gains. These results indicate significant room for improvement over current-generation Ge nanofins, provide geometrical guidelines to design optimized geometries and insight into the physics behind the significant mobility enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of flexible structures under lateral impact

Three methods for analysis of flexible structures under lateral impact are presented. The first proposed method (Method A) consists of: (1) modifying an available deceleration on a rigid target with conservation principles to account for structural flexibility; and (2) transient nonlinear analysis of the structure with the corrected forcing function. The second proposed method (Method B) is similar to Method A in obtaining the forcing function but it solves the equations of motion of an idealized two-degree-of-freedom system instead of directly using conservation principles. The last method simply provides the maximum force in the structure using the conservation of energy and linear momentum. A coupled simulation is also performed in LS-DYNA and compared against the proposed methods. A case study is presented to illustrate the applicability of all three methods and the LS-DYNA simulation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Study of {sup 31}P(n,α){sup 28}Al reaction using d(d,n){sup 3}He for the possible interference with {sup 27}Al(n,γ){sup 28}Al - Paper 44

At McMaster we use neutrons from the {sup 7}Li(p,n){sup 7}Be reaction to measure aluminum in human subjects via the {sup 27}Al(n,γ){sup 28}Al reaction. We use proton energies of between 1.9 MeV and 2.3 MeV, yielding maximum neutron energy of 0.575 MeV. In principle, {sup 28}Al can also be produced via the {sup 31}P(n,α){sup 28}Al reaction, which has a neutron energy threshold of 2.008 MeV. When aluminum is measured in bone, there can be 10{sup 5} times the mass of phosphorus present as there is aluminum. However, this potential interference cannot arise using the {sup 7}Li(p,n){sup 7}Be reaction in the proton energy range specified. Collaborators at Atomic Energy of Canada Limited (AECL), Chalk River, Purdue University in the USA and Shanxi Medical University in Taiyuan, China are also interested in being able to measure aluminum in bone in living human subjects. Both AECL and Purdue have acquired D-D sets (accelerators producing neutrons via the d(d,n){sup 3}He reaction). These operate at high current (∼mA) and relatively low accelerating voltage (150 kV), relying on quantum mechanical tunneling through the Coulomb barrier. These D-D sets produce neutrons of energy 2.565 MeV. This is above the threshold for the {sup 31}P(n,α){sup 28}Al reaction, but we have not been able to find any report in which this reaction has had a cross section measurably greater than zero for neutron energies of less than 3 MeV. So, it is an open question as to whether the potential interfering reaction with phosphorus is a concern when using neutrons from a D-D set to measure aluminum in bone. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Calibration of ITER Instant Power Neutron Monitors: Recommended Scenario of Experiments at the Reactor

Instant power is a key parameter of the ITER. Its monitoring with an accuracy of a few percent is an urgent and challenging aspect of neutron diagnostics. In a series of works published in Problems of Atomic Science and Technology, Series: Thermonuclear Fusion under a common title, the step-by-step neutronics analysis was given to substantiate a calibration technique for the DT and DD modes of the ITER. A Gauss quadrature scheme, optimal for processing “expensive” experiments, is used for numerical integration of {sup 235}U and {sup 238}U detector responses to the point sources of 14-MeV neutrons. This approach allows controlling the integration accuracy in relation to the number of coordinate mesh points and thus minimizing the number of irradiations at the given uncertainty of the full monitor response. In the previous works, responses of the divertor and blanket monitors to the isotropic point sources of DT and DD neutrons in the plasma profile and to the models of real sources were calculated within the ITER model using the MCNP code. The neutronics analyses have allowed formulating the basic principles of calibration that are optimal for having the maximum accuracy at the minimum duration of in situ experiments at the reactor. In this work, scenarios of the preliminary and basic experimental ITER runs are suggested on the basis of those principles. It is proposed to calibrate the monitors only with DT neutrons and use correction factors to the DT mode calibration for the DD mode. It is reasonable to perform full calibration only with {sup 235}U chambers and calibrate {sup 238}U chambers by responses of the {sup 235}U chambers during reactor operation (cross-calibration). The divertor monitor can be calibrated using both direct measurement of responses at the Gauss positions of a point source and simplified techniques based on the concepts of equivalent ring sources and inverse response distributions, which will considerably reduce the amount of measurements. It is shown that the monitor based on the average responses of the horizontal and vertical neutron chambers remains spatially stable as the source moves and can be used in addition to the staff monitor at neutron fluxes in the detectors four orders of magnitude lower than on the first wall, where staff detectors are located. Owing to low background, detectors of neutron chambers do not need calibration in the reactor because it is actually determination of the absolute detector efficiency for 14-MeV neutrons, which is a routine out-of-reactor procedure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermoelectric Properties of CoAsSb: An Experimental and Theoretical Study

Polycrystalline samples of CoAsSb were prepared by annealing a stoichiometric mixture of the elements at 1073 K for two weeks. Synchrotron powder X-ray diffraction refinement indicated that CoAsSb adopts arsenopyrite-type structure with space group P21/c. Sb vacancies were observed both by elemental and structural analysis, which indicate CoAsSb0.883 composition. CoAsSb was thermally stable up to 1073 K without structure change, but decomposed at 1168 K. Thermoelectric properties were measured from 300 to 1000 K on a dense pellet. Electrical resistivity measurements revealed that CoAsSb is a narrow-band-gap semiconductor. The negative Seebeck coefficient indicated that CoAsSb is an n-type semiconductor, with the maximum value of -132.42 μV/K at 450 K. The overall thermal conductivity is between 2.9 W/m K and 6.0 W/m K in the temperature range of 300-1000 K, and the maximum value of figure of merit, zT, reaches 0.13 at 750 K. First principles calculations of the electrical resistivity and Seebeck coefficient confirmed n-type semiconductivity, with a calculated maximum Seebeck coefficient of -87 μV/K between 900 and 1000 K. The difference between experimental and calculated Seebeck coefficient was attributed to the Sb vacancies in the structure. The calculated electronic thermal conductivity is close to the experimental total thermal conductivity, and the estimated theoretical zT based solely on electronic thermal conductivity agrees with experimental values in the high temperature range, above 800 K. The effect of Sb vacancies on the electronic and transport properties are discussed.

Tan, Xiaoyan (ORCID:0000000217428252)↗

In Pursuit of 2D Materials for Maximum Optical Response

Despite being only a few atoms thick, single-layer two-dimensional (2D) materials display strong electron–photon interactions that could be utilized in efficient light modulators on extreme subwavelength scales. In various applications involving light modulation and manipulation, materials with strong optical response at different wavelengths are required. Using qualitative analytical modeling and first-principles calculations, we determine the theoretical limit of the maximum optical response such as absorbance ($A$) and reflectance ($R$) in 2D materials and also conduct a computational survey to seek out those with best $A$ and $R$ in various frequency ranges, from mid-infrared to deep-ultraviolet. We find that 2D boron has broadband reflectance R > 99% for >100 layers, surpassing conventional thin films of bulk metals such as silver. Moreover, we identify 2D monolayer semiconductors with maximum response, for which we obtain quantitative estimates by calculating quasiparticle energies and accounting for excitonic effects by solving the Bethe–Salpeter equation. We found several monolayer semiconductors with absorbances ≳30% in different optical ranges, which are more than half of the maximum possible value, Alim = 1/2, for a freestanding 2D material. Our study predicts 2D materials which can potentially be used in ultrathin reflectors and absorbers for optoelectronic application in various frequency ranges.

36 MATERIALS SCIENCE↗

First-principles study of the surface properties of uranium carbides

Uranium carbides have attracted renewed interest as advanced nuclear fuels for Generation IV reactors. As an important property required for gas bubble modeling in nuclear fuels, the surface energy of uranium carbides is scarce in literature. In this work, we study the surface properties of uranium carbides by first-principles density functional theory calculations. Surface orientations with maximum Miller index up to 3, 2 and 2 are investigated for UC, U 2 C 3 and α-UC 2 , respectively. By studying the effects of surface termination and chemical potential on surface energy, we identify the factors that determines the surface stability. From the calculated surface energies, the surface properties of uranium carbide single crystals are obtained from Wulff construction, including equilibrium morphology, dominant surface orientation and area weighted surface energy.

36 MATERIALS SCIENCE↗

Pressure Self-focusing Effect and Novel Methods for Increasing the Maximum Pressure in Traditional and Rotational Diamond Anvil Cells

The main principles of producing a region near the center of a sample, compressed in a diamond anvil cell (DAC), with a very high pressure gradient and, consequently, with high pressure are predicted theoretically. The revealed phenomenon of generating extremely high pressure gradient is called the pressure self-focusing effect. Initial analytical predictions utilized generalization of a simplified equilibrium equation. Then, the results are refined using our recent advanced model for elastoplastic material under high pressures in finite element method (FEM) simulations. The main points in producing the pressure self-focusing effect are to use beveled anvils and reach a very thin sample thickness at the center. We find that the superposition of torsion in a rotational DAC (RDAC) offers drastic enhancement of the pressure self-focusing effect and allows one to reach the same pressure under a much lower force and deformation of anvils.

42 ENGINEERING↗

Tracking Excited States in Wave Function Optimization Using Density Matrices and Variational Principles

We introduce an approach for finding individual excited states' energy stationary points in complete active space self-consistent field theory that is compatible with standard optimization methods and highly effective at overcoming difficulties due to root flipping and near-degeneracies. Inspired by both the maximum overlap method and recent progress in excited-state variational principles, our approach combines these ideas in order to track individual excited states throughout the orbital optimization process. In a series of tests involving root flipping, near-degeneracies, charge transfers, and double excitations, we show that this approach is more effective for state-specific optimization than either the naive selection of roots on the basis of energy ordering or a more direct generalization of the maximum overlap method. We offer evidence that this state-specific approach improves the performance of complete active space perturbation theory for vertical excitation energies. Furthermore, we find that the state-specific optimization can help avoid state-averaging-induced discontinuities on potential energy surfaces. With a simple implementation, a low cost, and compatibility with large active space methods, the approach is designed to be useful in a wide range of excited-state investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theory of the thermionic current beyond the traditional space charge limit enabled by trapped ions in the virtual cathode

We show that trapped ions in virtual cathode potential wells can raise the transmitted current of emitted electrons into a plasma much closer to the full emission than is predicted by cathode sheath theories without trapped ions. The transmitted current is controlled by the well barrier voltage, which must adjust to balance the creation of low-energy ions within the well, and their loss. Our model considers the case of a plasma-facing cathode where trapped ions are created passively via charge-exchange collisions and lost passively via thermal leakage over the well. We quantify these rates and estimate the current in terms of system parameters for thermionic emission into a plasma with several cathode geometries. A general prediction is that the current as a function of emitted flux does not saturate at the traditional space charge limit (the onset of a well) but can reach far higher values until the trapped ion balance breaks down, causing instability. The maximum stable current depends on parameters but in principle can be arbitrarily high if active techniques are used to manipulate the trapped ion balance. We conclude that major improvements in plasma technologies with hot cathodes might be achieved by optimizing the current enhancement enabled by trapped ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Benchmarking boron carbide equation of state using computation and experiment

Boron carbide ( B 4 C ) is of both fundamental scientific and practical interest due to its structural complexity and how it changes upon compression, as well as its many industrial uses and potential for use in inertial confinement fusion (ICF) and high-energy density physics experiments. Here, we report the results of a comprehensive computational study of the equation of state (EOS) of B 4 C in the liquid, warm dense matter, and plasma phases. Our calculations are cross-validated by comparisons with Hugoniot measurements up to 61 megabar from planar shock experiments performed at the National Ignition Facility (NIF). Our computational methods include path integral Monte Carlo, activity expansion, as well as all-electron Green's function Korringa-Kohn-Rostoker and molecular dynamics that are both based on density functional theory. We calculate the pressure-internal energy EOS of B 4 C over a broad range of temperatures ( ~ 6 × 10 3 – 5 × 10 8 K) and densities (0.025–50 g / cm 3 ). We assess that the largest discrepancies between theoretical predictions are ≲ 5 % near the compression maximum at 1– 2 × 10 6 K. This is the warm-dense state in which the K shell significantly ionizes and has posed grand challenges to theory and experiment. By comparing with different EOS models, we find a Purgatorio model (LEOS 2122) that agrees with our calculations. The maximum discrepancies in pressure between our first-principles predictions and LEOS 2122 are ~ 18 % and occur at temperatures between 6 × 10 3 – 2 × 10 5 K, which we believe originate from differences in the ion thermal term and the cold curve that are modeled in LEOS 2122 in comparison with our first-principles calculations. To account for potential differences in the ion thermal term, we have developed three new equation-of-state models that are consistent with theoretical calculations and experiment. We apply these new models to 1D hydrodynamic simulations of a polar direct-drive NIF implosion, demonstrating that these new models are now available for future ICF design studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗