Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linear equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Sparse matrix techniques applied to modal analysis of multi-section duct liners

A simplified procedure is presented for analysis of ducts with discretely nonuniform properties. The analysis uses basis functions as the generalized coordinates. The duct eigenfunctions are approximated by finite series of these functions. The emphasis is on solution of the resulting large sparse set of linear equations. Characteristics of sparse matrix algorithms are outlined and some criteria for application are established. Analogies with structural methods are used to illustrate variations which can increase efficiency in generating values for design optimization routines. The effects of basis function selection, number of eigenfunctions and identification and ordering of equations on the sparsity and solution stability are included.

Arnold, W. R.↗

Analytical stability and simulation response study for a coupled two-body system

An analytical stability study and a digital simulation response study of two connected rigid bodies are documented. Relative rotation of the bodies at the connection is allowed, thereby providing a model suitable for studying system stability and response during a soft-dock regime. Provisions are made of a docking port axes alignment torque and a despin torque capability for encountering spinning payloads. Although the stability analysis is based on linearized equations, the digital simulation is based on nonlinear models.

Tao, K. M.↗

Remote sensing of snowpack density using shortwave radiation

Albedo or satellite radiance measurements can be used to estimate average snowpack density by means of a multiple linear equation. The in situ data equation predicted density with a correlation (sq r) of 0.79 and a standard error of 0.027 gm/cu cm. The data from LANDSAT-1 were not as significant in a similar equation, possibly because of the large field of view.

Mcmillan, M. C.↗

An onboard deorbit target line computation technique

The design concept and results of a target line generator software package, which was developed to provide the onboard entry interface range, were documented. This generator, which was eventually reduced to one linear equation, was developed to the point that it provides autonomous landing site relocation capability, negligible core storage, and acceptable performance for the cases tested.

Bedford, J. J.↗

Effect of combined roll rate and sideslip angle on aircraft flight stability

The combined destabilizing effects of roll rate and sideslip angle are studied for a high angle-of-attack flight condition using a linear simulation of the coupled motions of a Space Shuttle-like configuration. Variations in the eigenvalues for a flight condition nominally identified by an angle of attack of 33.29 deg and a Mach number of 4.9 are examined with illustrations of the separate effects of body-axis roll rate and yaw rate, stability-axis roll rate, dynamic pressure, and sideslip angle. It is shown that the stability of the free motion of the vehicle is sensitive to roll rate and that this sensitivity is enhanced by nonzero sideslip angle. The results suggest that fully coupled linearized equations can be of value both for the study of Space Shuttle stability and for a better understanding of post-stall gyrations, incipient spin, and departure prevention for high-performance aircraft.

Stengel, R. F.↗

Dynamics of flexible spinning satellites with radial wire antennas

A dynamic analysis is presented for a spin-stabilized spacecraft employing four radial wire antennas with tip masses. The satellite is modelled as a 14-degree-of-freedom system, and the linearized equations of motion are found. The lowest-order vibrational modes and natural frequencies of the gyroscopically coupled system are then determined. Because the satellite spin rate is decreased by antenna deployment, a spin-up maneuver is needed. The response of the time-varying mode equations during spin-up is found for the planar modes in terms of Bessel functions and a Struve function of order -0.25. The particular solution is expressed in various forms, including an infinite series of Bessel functions and a particularly useful asymptotic expansion. An error formula for the latter is derived, showing that it gives good accuracy. A simple approximation to the complementary function is obtained using the Wenzel-Kramers-Brillouin method, and the phase error in the approximation is shown to be small.

Longman, R. W.↗

Mathematical formulation for the propagation of sound through a turbulent jet

The sound propagation through a nonuniform turbulent jet flow field is studied by means of a system of linearized equations governing the acoustic variables. These equations depend on the fluctuating flow-field variables which can be prescribed by experimental results. It is shown that the correlations of the acoustic variables depend throughout the flow field on the space-time correlation of the turbulent velocities and on the mean flow variables and their gradients.

Gunzburger, M.↗

Cubic spline reflectance estimates using the Viking lander camera multispectral data

A technique was formulated for constructing spectral reflectance estimates from multispectral data obtained with the Viking lander cameras. The output of each channel was expressed as a linear function of the unknown spectral reflectance producing a set of linear equations which were used to determine the coefficients in a representation of the spectral reflectance estimate as a natural cubic spline. The technique was used to produce spectral reflectance estimates for a variety of actual and hypothetical spectral reflectances.

Park, S. K.↗

The dynamics and optimal control of spinning spacecraft with movable telescoping appendages. Part C: Effect of flexibility during boom deployment

The dynamics of a spinning symmetrical spacecraft system during the deployment (or retraction) of flexible boom-type appendages were investigated. The effect of flexibility during boom deployment is treated by modelling the deployable members as compound spherical pendula of varying length (according to a control law). The orientation of the flexible booms with respect to the hub, is described by a sequence of two Euler angles. The boom members contain a flexural stiffness which can be related to an assumed effective restoring linear spring constant, and structural damping which effects the entire system. Linearized equations of motion for this system, when the boom length is constant, involve periodic coefficients with the frequency of the hub spin. A bounded transformation is found which converts this system into a kinematically equivalent one involving only constant coefficients.

Bainum, P. M.↗

Timing formulas for dissection algorithms on vector computers

The use of the finite element and finite difference methods often leads to the problem of solving large, sparse, positive definite systems of linear equations. MACSYMA plays a major role in the generation of formulas representing the time required for execution of the dissection algorithms. The use of MACSYMA in the generation of those formulas is described.

Poole, W. G., Jr.↗

A new application of algebraic geometry to systems theory

Following an introduction to algebraic geometry, the dominant morphism theorem is stated, and the application of this theorem to systems-theoretic problems, such as the feedback problem, is discussed. The Gaussian elimination method used for solving linear equations is shown to be an example of a dominant morphism.

Martin, C. F.↗

A block iterative LU solver for weakly coupled linear systems

A hybrid technique, called the block iterative LU solver, is proposed for solving the linear equations resulting from a finite element numerical analysis of certain fluid dynamics problems where the equations are weakly coupled between distinct sets of variables. Either the block Jacobi iterative method or the block Gauss-Seidel iterative solver is combined with LU decomposition.

Cooke, C. H.↗

Dynamical theory of stability for elastic rods with nonlinear curvature and twist

Considering non-linear terms in the curvature as well as in the twist, the governing boundary value problem for lateral bending of elastic, transverse loaded rods is formulated by means of Hamilton's principle. Using the method of small vibrations, the associated linearized equations of stability are derived, which complete the currently accepted relations. The example of the simplest lateral bending problem illustrates the improved effect of the proposed equations.

Wauer, J.↗

Aerodynamic coefficient estimation for dynamic wind tunnel models

Maximum likelihood parameter identification is used to estimate the aerodynamic coefficients of a 'flying' aircraft model which is mounted in a transonic wind tunnel by a system of cables and pulleys. The model's motion is governed by both cable and aerodynamic forces, where the parameters to be identified are functions of the aerodynamic forces but cable forces greatly predominate. The test data were successfully processed assuming a linear equation model in the identification procedure. In one instance, the procedure was able to detect a failing measurement instrument. The final parameter estimates are compared to estimates obtained in independent tests of a similar aircraft model.

Mohr, R. L.↗

Calculation of unsteady transonic flows using the integral equation method

The basic integral equations for a harmonically oscillating airfoil in a transonic flow with shock waves are derived; the reduced frequency is assumed to be small. The problems associated with shock wave motion are treated using a strained coordinate system. The integral equation is linear and consists of both line integrals and surface integrals over the flow field which are evaluated by quadrature. This leads to a set of linear algebraic equations that can be solved directly. The shock motion is obtained explicitly by enforcing the condition that the flow is continuous except at a shock wave. Results obtained for both lifting and nonlifting oscillatory flows agree satisfactorily with other accurate results.

Nixon, D.↗

Radiative transfer calculated from a Markov chain formalism

The theory of Markov chains is used to formulate the radiative transport problem in a general way by modeling the successive interactions of a photon as a stochastic process. Under the minimal requirement that the stochastic process is a Markov chain, the determination of the diffuse reflection or transmission from a scattering atmosphere is equivalent to the solution of a system of linear equations. This treatment is mathematically equivalent to, and thus has many of the advantages of, Monte Carlo methods, but can be considerably more rapid than Monte Carlo algorithms for numerical calculations in particular applications. We have verified the speed and accuracy of this formalism for the standard problem of finding the intensity of scattered light from a homogeneous plane-parallel atmosphere with an arbitrary phase function for scattering. Accurate results over a wide range of parameters were obtained with computation times comparable to those of a standard 'doubling' routine. The generality of this formalism thus allows fast, direct solutions to problems that were previously soluble only by Monte Carlo methods. Some comparisons are made with respect to integral equation methods.

Esposito, L. W.↗

A uniqueness proof for a transonic flow problem

The uniqueness of the first-order lifting-line correction to the two-dimensional transonic small disturbance potential for the flow past a lifting, three-dimensional, large-aspect-ratio wing is proved. The correction is the solution of a linear equation of mixed type in the plane slit along the positive x-axis. The boundary data consist of Neumann data, continuity restrictions, the Kutta condition, and the form of the asymptotic behavior at infinity. The zeroth-order flow is assumed to be shock-free, and hence the correction is shock-free.

Cook, L. P.↗

Dynamics of spinning spacecraft during the deployment of flexible boom

The effect of flexibility on the dynamics of a spinning symmetrical spacecraft during the extension (or retraction) of boom-type appendages is treated by modeling the appendages as compound spherical pendula with varying lengths. Both boom stiffness and structural damping are included. For constant boom length the resulting linearized equations of motion contain periodic coefficients involving the spin frequency. A bounded transformation converts this system into a kinematically equivalent one (with only constant coefficients), whose stability is analyzed using the Kelvin-Tait-Chetaev theorem. The dynamics during extension is predicted by numerical simulation of the nonlinear equations.

James, P. K.↗