Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ion modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Modifications of magnetohydrodynamics as applied to the solar wind

The effect of including the Braginskii viscous stress tensor in magnetohydrodynamics is remarked upon. It is shown that semiquantitative agreement with a recently observed anisotropy in the turbulent solar wind spectrum can be achieved in this way. The modifications of the dynamical equations are simple enough to permit their inclusion in numerical codes. The effects of large 'ion parallel viscosities' also may be significant for plasmas in quite different regimes than the solar wind.

Montgomery, David↗
NASA NTRS1975

Experimental investigations of argon and xenon ion sources

The multipole thruster was used to investigate the use of argon and xenon propellants as possible alternatives to the electric thruster propellants of mercury and cesium. The multipole approach was used because of its general high performance level. The design employed, using flat and cylindrical rolled sections of sheet metal, was selected for ease of fabrication, design, assembly, and modification. All testing was conducted in a vacuum facility and the pumping was accomplished by a 0.8 m diffusion pump together with liquid nitrogen cooled liner. Minimum discharge losses were in the 200-250 ev. ion range for both argon and xenon. Flatness parameters were typically in the 0.70-0.75 range.

Kaufman, H. R.↗
NASA NTRS1998

Formation of RNA oligomers on montmorillonite: site of catalysis

Certain montmorillonites catalyze the self condensation of the 5'-phosphorimidazolide of nucleosides in pH 8 aqueous electrolyte solutions at ambient temperatures leading to formation of RNA oligomers. In order to establish the nature of the sites on montmorillonite responsible for this catalytic activity, oligomerization reactions were run with montmorillonites which had been selectively modified (I) at the edges by (a) fluoride treatment, (b) silylation, (c) metaphosphate treatment of the anion exchange sites (II) in the interlayer by (a) saturation with quaternary alkylammonium ions of increasing size, (b) aluminum polyoxo cations. High pressure liquid chromatography, HPLC, analysis of condensation products for their chain lengths and yields indicated that modification at the edges did not affect the catalytic activity to a significant extent, while blocking the interlayer strongly inhibited product formation.

NASA Discipline Exobiology↗
DOE OSTI2022

Selective Removal of Barium and Hardness Ions from Brackish Water with Chemically Enhanced Electrodialysis

The use of a nonconventional water resource for energy and industrial applications often requires extraction of low-level undesirable ions from matrices of benign dominant ions. In this study, the selective extraction of Ba 2+ and Mg 2+ from synthetic brine solutions was evaluated using strong acid cation-exchange membranes modified with the surface deposition of macrocyclic molecules including crown ethers and calixarenes. Compared to the bare membrane, vinylbenzo-18-crown-6 (VB18C6) and calix[4]arene-amended membranes showed increased selectivity for Ba 2+ and Mg 2+ with respect to the dominant ion (Na + ) by up to fourfolds, with the calix[4]arene-modified membrane achieving more selective separation than VB18C6. Optimal selectivity was achieved at a moderate-to-high current density (3.1–6.3 mA/cm 2 ), which was attributed to the alleviation of transport limitation in the boundary layer by the surface modification. Amendment of a calix[4]arene derivative with a crown-6 “boot strap” and two carboxylic groups resulted in reduced selectivity due to the formation of strong complexes with divalent ions. Furthermore, these results show that surface deposition of ion sequestrants can be a versatile approach to improve the membrane’s selectivity; however, the performance is sensitive to feed water salinity, current loading, and the macrocycle-ion chemistry, where there is a trade-off between ion affinity and mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Flash electropolishing of BCC Fe and Fe-based alloys

The preparation of transmission electron microscopy (TEM) samples is a critical step in the characterization of materials, and the focused ion beam (FIB) technique is a commonly used method. However, a significant limitation of this technique is the FIB-induced damages on the foil surfaces, which can obscure the real features of interest, particularly in radiation effects studies. To overcome this limitation, this study presents a detailed description of the flash electropolishing technique, which can be used to remove the FIB damage from samples. The flash electropolishing technique has been successfully applied to a range of materials, including Fe, Fe-based model alloys, commercial Fe-Cr alloys, and advanced Fe-Cr alloys, both in their as-received and ion-irradiated states. Furthermore, the parameters used for Fe-Cr model alloys can be adjusted for commercial and advanced alloys with minimal modifications. Further, the study also examined the effects of electropolishing variables, such as perchloric acid concentration, electropolishing temperature, Cr concentration, and voltage. Qualitatively, a general trend and scoping test strategy is explored in our experiments. Overall, the flash electropolishing technique offers a promising solution to the challenges posed by FIB-induced damages in the preparation of TEM samples.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Status of the J-series 30-cm mercury ion thruster

This paper describes the status of the 30-cm J-series mercury ion thruster. This thruster was baselined for the Solar Electric Propulsion System (SEPS) vehicle. This thruster is described and several modifications plus suggested modifications are presented. Some of the modifications resulted from tests performed with the thruster. The operational characteristics of eight J-series thrusters are presented. Isolator contamination and flake formation are also discussed.

Kami, S.↗
NASA NTRS1984

Plasma and magnetospheric research

Research developments in the following areas are discussed: (1) an ion trajectory computer code which plots the paths of ions ejected from the polar cusp ionosphere; (2) the response of plasmaspheric ion temperatures to geomagnetic activity; (3) spacecraft sheath effects; (4) plasma flow; (5) neutral gas temperatures; and (6) instrument fabrication, modification, and maintenance.

Comfort, R. H.↗
NASA NTRS1986

Finite size corrections to Madelung number

It is customary in the study of ionic crystals to assume that the ions are point charges at their respective lattice sites; the corresponding electrostatic energy of one such ion is reducible to Madelung's form, where the Madelung number has a value of 1.7467. This paper considers the modifications in the electrostatic energy when the atomic finite size is treated in more detail. The results are tabulated as a direct correction to Madelung's number for alkali halide cubic crystals.

Wilson, J. W.↗
NASA NTRS2007

Multifunctional Composites for Improved Polyimide Thermal Stability

The layered morphology of silicate clay provides an effective barrier to oxidative degradation of the matrix resin. However, as resin thermal stability continues to reach higher limits, development of an organic modification with comparable temperature capabilities becomes a challenge. Typically, phyllosilicates used in polymer nanocomposites are modified with an alkyl ammonium ion. Such organic modifiers are not suited for incorporation into high temperature polymers as they commonly degrade below 200oC. Therefore, the development of nanoparticle specifically suited for high temperature applications is necessary. Several nanoparticles were investigated in this study, including pre-exfoliated synthetic clay, an organically modified clay, and carbon nanofiber. Dispersion of the layered silicate increases the onset temperature of matrix degradation as well as slows oxidative degradation. The thermally stable carbon nanofibers are also observed to significantly increase the resin thermal stability.

Miller, Sandi G.↗
DOE OSTI2020

First-principles calculation of the configurational energy density of states for a solid-state ion conductor with a variant of the Wang and Landau algorithm

In this work, a variant of the Wang and Landau algorithm for calculation of the configurational energy density of states is proposed. The algorithm was developed for the purpose of using first-principles simulations, such as density functional theory, to calculate the partition function of disordered sublattices in crystal materials. The expensive calculations of first-principles methods make a parallel algorithm necessary for a practical computation of the configurational energy density of states within a supercell approximation of a solid-state material. The algorithm developed in this work is tested with the two-dimensional (2d) Ising model to bench mark the algorithm and to help provide insight for implementation to a materials science application. Tests with the 2d Ising model revealed that the algorithm has good performance compared to the original Wang and Landau algorithm and the 1/$\textit{t}$ algorithm, in particular the short iteration performance. Further, a proof of convergence is presented within an adiabatic assumption, and the analysis is able to correctly predict the time dependence of the modification factor to the density of states. The algorithm was then applied to the lithium and lanthanum sublattice of the solid-state lithium ion conductor Li 0.5 La 0.5 TiO 3 . This was done to help understand the disordered nature of the lithium and lanthanum. The results find, overall, that the algorithm performs very well for the 2d Ising model and that the results for Li 0.5 La 0.5 TiO 3 are consistent with experiment while providing additional insight into the lithium and lanthanum ordering in the material. The primary result is that the lithium and lanthanum become more mixed between layers along the c axis for increasing temperature. In part, the simulation of the disordered Li 0.5 La 0.5 TiO 3 system serves as a benchmark for what size systems are currently and in the near future practical to calculate with density functional theory methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1995

Semikinetic modeling and observations of high-latitude plasma outflow

In one fo the most exciting areas of progress, we have now developed a dynamic semikinetic model for examining the synergistic effects of waves and magnetospheric hot plasma populations on the outflowing ionospheric plasma. We have done this by imposing hot biMaxwellian ion and electron distributions at the top of our auroral simulation flux tube (4 R(sub e)), as well as a spectrum of waves with altitude which perpendicularly heats the ionospheric ions. We have also addressed the quasi-statistical properties of out flowing O(+) through bulk parameter analysis of DE-1/RIMS observations when DE-1 was in the midaltitude polar cap magnetosphere. A very exciting paper which was both submitted and appeared during this period in JGR concerned the centrifugal acceleration effect on the polar wind. During this year, we also developed the extension of our GSK code to include the lower ionosphere and associated processes. Finally, perhaps our most exciting project currently is a study of F-region upflows using a modification of the FLIP ionospheric fluid dynamics model of Richards and Torr to allow for the effects of soft electron precipitation ionization and convection-driven ion heating, and performed comparisons with satellite and radar data. A list of reference papers that have been published is listed.

Horwitz, James L.↗
DOE OSTI2022

Chemical and elemental mapping of spent nuclear fuel sections by soft X-ray spectromicroscopy

Soft X-ray spectromicroscopy at the O K -edge, U N 4,5 -edges and Ce M 4,5 -edges has been performed on focused ion beam sections of spent nuclear fuel for the first time, yielding chemical information on the sub-micrometer scale. To analyze these data, a modification to non-negative matrix factorization (NMF) was developed, in which the data are no longer required to be non-negative, but the non-negativity of the spectral components and fit coefficients is largely preserved. The modified NMF method was utilized at the O K -edge to distinguish between two components, one present in the bulk of the sample similar to UO 2 and one present at the interface of the sample which is a hyperstoichiometric UO 2+ x species. The species maps are consistent with a model of a thin layer of UO 2+ x over the entire sample, which is likely explained by oxidation after focused ion beam (FIB) sectioning. In addition to the uranium oxide bulk of the sample, Ce measurements were also performed to investigate the oxidation state of that fission product, which is the subject of considerable interest. Analysis of the Ce spectra shows that Ce is in a predominantly trivalent state, with a possible contribution from tetravalent Ce. Atom probe analysis was performed to provide confirmation of the presence and localization of Ce in the spent fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Tunable Ion Transport with Freestanding Vermiculite Membranes

Membranes integrating two-dimensional (2D) materials have emerged as a category with unusual ion transport and potentially useful separation applications in both aqueous and nonaqueous systems. The interlayer galleries in these membranes drive separation and selectivity, with specific transport properties determined by the chemical and structural modifications within the inherently different interlayers. Here, in this work, we report an approach to tuning interlayer spacing with a single source material–exfoliated and restacked vermiculite with alkanediamine cross-linkers–to both control the gallery height and enhance the membrane stability. The as-prepared cross-linked 2D vermiculite membranes exhibit ion diffusivities tuned by the length of the selected diamine molecule. The 2D nanochannels in these stabilized vermiculite membranes enable a systematic study of confined ionic transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of crystallite geometries on electrochemical performance of porous intercalation electrodes by multiscale operando investigation

Lithium-ion batteries are yet to realize their full promise because of challenges in the design and construction of electrode architectures that allow for their entire interior volumes to be reversibly accessible for ion storage. Electrodes constructed from the same material and with the same specifications, which differ only in terms of dimensions and geometries of the constituent particles, can show surprising differences in polarization, stress accumulation and capacity fade. Here, using operando synchrotron X-ray diffraction and energy dispersive X-ray diffraction (EDXRD), we probe the mechanistic origins of the remarkable particle geometry-dependent modification of lithiation-induced phase transformations in V2O5 as a model phase-transforming cathode. A pronounced modulation of phase coexistence regimes is observed as a function of particle geometry. Specifically, a metastable phase is stabilized for nanometre-sized spherical V2O5 particles, to circumvent the formation of large misfit strains. Spatially resolved EDXRD measurements demonstrate that particle geometries strongly modify the tortuosity of the porous cathode architecture. Greater ion-transport limitations in electrode architectures comprising micrometre-sized platelets result in considerable lithiation heterogeneities across the thickness of the electrode. These insights establish particle geometry-dependent modification of metastable phase regimes and electrode tortuosity as key design principles for realizing the promise of intercalation cathodes. Designing electrode architectures for Li-ion batteries that can be reversibly accessible for ion storage can be challenging. Using operando techniques the mechanistic origin of lithiation-induced phase transformations in a V2O5 model cathode is now clarified.

Luo, Yuting↗
DOE OSTI2022

Development of Ion Stopping Models for HED Plasmas Using Unified Self-Consistent Field Models and Self-Consistent Electron Distributions

We have implemented several corrections to the electronic stopping power model combining the RPA dielectric response formalism and local density approximation with electronic density distribution calculated in an average atom model. These modifications include strong collision correction, local field correction, electron binding energy correction, and the Barkas effect. The combined results bring the RPA-LDA stopping power in cold targets to closer agreements with experiments for a wide range of materials. The same method is then applied to the stopping of ions in warm dense plasmas. The computational framework developed during this project is publicly available on GitHub (https://github.com/dedx-erpa/dedx). Tabulated data for protons in cold target for common materials are located in the data/ subdirectory of the repository.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1983

Mechanical and spectroscopic properties of metal-containing polyimides

The incorporation of specific metal ions into polyimides is described. Detailed studies have included various compounds of copper, lithium, and palladium as dopants. Addition of the metal during polymerization or after formation of the polyamic acid precedes the thermal imidization step. With many dianhydride-diamine-dopant combinations high quality variously colored films are produced. Many metal doped films exhibit (1) improved high temperature adhesive properties, (2) increased electrical conductivity, (3) excellent thermal stability, (4) improved acid/base resistance, (5) increased modulus in flexible films and (6) excellent high temperature tensile strength. X-ray photo-electron spectroscopic study of these films suggests that many of the additives undergo chemical modification during thermal imidization. Palladium dopants appear to be partially reduced to the metallic state, while lithium and copper dopants are probably converted to their oxides. Ion etching experiments with Auger electron spectroscopy monitoring are discussed.

Taylor, L. T.↗
NASA NTRS1984

Mechanical and spectroscopic properties of metal containing polyimides

The incorporation of specific metal ions into polyimides is described. Detailed studies have included various compounds of copper, lithium, and palladium as dopants. Addition of the metal during polymermzation or after formation of the polyamic acid precedes the thermal imidization step. With many dianhydride-diamine-dopant combinations high quality variously colored films are produced. Many metal doped films exhibit (1) improved high temperature adhesive properties, (2) increased electrical conductivity, (3) excellent thermal stability, (4) improved acid/base resistance, (5) increased modulus in flexible films and (6) excellent high temperature tensile strength. X-ray photo-electron spectroscopic study of these films suggests that many of the additives undergo chemical modification during thermal imidization. Palladium dopants appear to be partially reduced to the metallic state, while lithium and copper dopants are probably converted to their oxides. Ion etching experiments with Auger electron spectroscopy monitoring are discussed.

Taylor, L. T.↗