SEARCH · Engineering Papers

Results for “interfacial evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Hybrid Doping Strategy with High‐Entropy Cu/Fe Surface Modification and Zr Bulk Incorporation for Ni‐Rich Cathodes

A hybrid doping strategy combining Zr 4+ bulk doping with high-entropy Cu 2+ /Fe 3+ surface doping is developed to enhance the structural and interfacial stability of Ni-rich layered oxide cathodes. Cu and Fe are selectively introduced at the particle surface via a surface-selective ion-exchange process, forming a ≈15 nm Fe-rich layer while preserving the layered framework. Compared to the pristine cathode, the hybrid sample exhibits significantly improved electrochemical performance in both half-cell and full-cell configurations. In half-cells, the hybrid retains 88.5% and 90.2% after 100 cycles at 1C under 4.6 and 4.5 V, respectively. During high-voltage full-cell cycling, the hybrid cathode maintains over 80% capacity retention, whereas the pristine counterpart retains less than 10% under identical conditions over the same cycling period. XPS, EELS, and DEMS analyses confirm improved oxygen retention, suppressed gas evolution, and stable surface chemistry, while DFT calculations indicate enhanced Me–O bonding in the selected Fe 0.75 Cu 0.25 (Mn 1/16 Co 2/16 Ni 13/16 )O 2 surface composition, which is identified through DFT-calculated mixing energy reaching a minimum at this ratio, indicating the most thermodynamically favorable configuration. In conclusion, these results demonstrate the effectiveness of this hybrid doping strategy in mitigating coupled degradation pathways in Ni-rich cathodes.

15 GEOTHERMAL ENERGY↗

DOE OSTI2021

Investigations of the stability of GaAs for photoelectrochemical H 2 evolution in acidic or alkaline aqueous electrolytes

The long-term stability of p-GaAs photocathodes has been investigated for the hydrogen-evolution reaction (HER) in contact with either 1.0 M H 2 SO 4 (aq) or 1.0 M KOH(aq). Stability for the HER was evaluated using p-GaAs electrodes that were either etched or coated with active HER catalysts (Pt and CoP). Changes in surface characteristics of GaAs after exposure to electrochemical conditions were monitored by X-ray photoelectron spectroscopy (XPS), and electrode dissolution processes were evaluated by inductively coupled plasma mass spectrometry (ICP-MS). Consistent with thermodynamic predictions, after operation of the HER at pH 0 or pH 14, illuminated etched p-GaAs electrodes exhibited minimal dissolution while preserving a nearly stoichiometric surface. Electrodeposition or sputtering of Pt on the p-GaAs surface promoted the formation of excess As 0 via an interfacial reaction during the HER. The resulting non-stoichiometric As 0 -rich surface of p-GaAs/Pt electrodes caused a loss in photoactivity as well as substantial cathodic dark current. In contrast, p-GaAs electrodes coated with thin-film CoP catalysts did not display an increase in surficial As 0 after operation of the HER in acidic electrolytes. Minimization of deleterious interfacial reactions is thus critical to obtain extended stability in conjunction with high performance from p-GaAs photocathodes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2025

Predictive numerical modeling of plasma-induced surface roughness and wettability evolution in LM-PAEK/CF tape

Plasma surface modification effectively enhances adhesion in thermoplastic composites, yet its impacts on high-performance polymers like low-melting polyaryletherketone (LM-PAEK) remain inadequately quantified. Here, this study integrates experimental analysis and numerical modeling to characterize surface roughness and wettability changes in LM-PAEK/carbon fiber composites treated with atmospheric plasma. Atomic Force Microscopy quantified surface topography (n = 10 per condition for contact angles), while static contact-angle assessments measured wettability. Roughness rapidly increased from ∼0.2 nm to 1.6 nm, and contact angle reduced from ∼90° to 24°, both stabilizing after 25–30 s of exposure. A semi-empirical, physics-informed framework was calibrated to these data, coupling surface chemistry via the Owens–Wendt decomposition with topography via the Wenzel roughness factor, and evaluated using out-of-sample (cross-validated) tests, while static contact angle assessments measured wettability. Numerical predictions matched experimental results closely (RMSE <5%, R 2 > 0.95). Incorporating material-specific parameters, the calibrated model supports plasma-treatment optimization and provides quantitative guidance for improving interfacial adhesion in thermoplastic composite manufacturing.

Atomic Force Microscopy↗

DOE OSTI2023

Concentration‐Dependent Inhibition of Mesophilic PETases on Poly(ethylene terephthalate) Can Be Eliminated by Enzyme Engineering

Abstract Enzyme‐based depolymerization is a viable approach for recycling of poly(ethylene terephthalate) (PET). PETase from Ideonella sakaiensis ( Is PETase) is capable of PET hydrolysis under mild conditions but suffers from concentration‐dependent inhibition. In this study, this inhibition is found to be dependent on incubation time, the solution conditions, and PET surface area. Furthermore, this inhibition is evident in other mesophilic PET‐degrading enzymes to varying degrees, independent of the level of PET depolymerization activity. The inhibition has no clear structural basis, but moderately thermostable Is PETase variants exhibit reduced inhibition, and the property is completely absent in the highly thermostable HotPETase, previously engineered by directed evolution, which simulations suggest results from reduced flexibility around the active site. This work highlights a limitation in applying natural mesophilic hydrolases for PET hydrolysis and reveals an unexpected positive outcome of engineering these enzymes for enhanced thermostability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Theory and Simulation of Metal–Insulator–Semiconductor (MIS) Photoelectrodes

A metal–insulator–semiconductor (MIS) structure is an attractive photoelectrode-catalyst architecture for promoting photoelectrochemical reactions, such as the formation of H 2 by proton reduction. The metal catalyzes the generation of H 2 using electrons generated by photon absorption and charge separation in the semiconductor. The insulator layer between the metal and the semiconductor protects the latter element from photo-corrosion and, also, significantly impacts the photovoltage at the metal surface. Understanding how the insulator layer determines the photovoltage and what properties lead to high photovoltages is critical to the development of MIS structures for solar-to-chemical energy conversion. Herein, we present a continuum model for charge-carrier transport from the semiconductor to the metal with an emphasis on mechanisms of charge transport across the insulator. The polarization curves and photovoltages predicted by this model for a Pt/HfO 2 /p-Si MIS structure at different HfO 2 thicknesses agree well with experimentally measured data. The simulations reveal how insulator properties (i.e., thickness and band structure) affect band bending near the semiconductor/insulator interface and how tuning them can lead to operation closer to the maximally attainable photovoltage, the flat-band potential. This phenomenon is understood by considering the change in tunneling resistance with insulator properties. The model shows that the best MIS performance is attained with highly symmetric semiconductor/insulator band offsets (e.g., BeO, MgO, SiO 2 , HfO 2 , or ZrO 2 deposited on Si) and a low to moderate insulator thickness (e.g., between 0.8 and 1.5 nm). Beyond 1.5 nm, the density of filled interfacial trap sites is high and significantly limits the photovoltage and the solar-to-chemical conversion rate. These conclusions are true for photocathodes and photoanodes. This understanding provides critical insight into the phenomena enhancing and limiting photoelectrode performance and how this phenomenon is influenced by insulator properties. The study gives guidance toward the development of next-generation insulators for MIS structures that achieve high performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Mapping the kinetic evolution of metastable grain boundaries under non-equilibrium processing

The kinetic evolution of a multiplicity of metastable grain boundaries (GBs) under fast driving conditions are studied by atomistic modeling. Assisted with an enhanced statistical analysis, the energetic evolution of GBs over a broad metastability-temperature space is mapped out, wherein two distinct regimes—an ageing regime and a rejuvenating regime—are retrieved with high fidelity. By comparing the results under various conditions (e.g. random perturbations, isothermal annealing, and fast heating/cooling), it is shown that such ageing/rejuvenating mechanism map is universal, irrespective of the actual stimuli used to elicit the metastable GBs. Here, the ageing/rejuvenating phenomena are demonstrated to stem from the energy imbalance of uphill climbing and downhill dropping during sequential transitions in the system's potential energy landscape. Without the necessity of introducing free parameters, such model can reconcile experimentally measured hardness variation of nanocrystalline metals subjected to femto-second laser irradiation, and it therefore provides a novel perspective on achieving a plurality of interfacial states and facilitating previously inaccessible property regimes.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Experimental and theoretical investigation of the crystalline surface, film, and interface properties of antiperovskite Mn 3 GaN grown by molecular beam epitaxy on MgO(001)

Here, we present a study of the epitaxial growth, characterization, and theoretical modeling of thin film antiperovskite Mn 3 GaN, an antiferromagnetic material with kagome structure which is grown on MgO (001) substrates using N-plasma-assisted molecular beam epitaxy. Reflection high energy electron diffraction is used to assess the in-plane evolution of the film structure during growth, and the surface is investigated in-situ using scanning tunneling microscopy and Auger electron spectroscopy. These results are combined with precision measurements done ex-situ determining the film lattice constants using a combination of x-ray diffraction with reciprocal space mapping and scanning transmission electron microscopy. Overall, a uniform, homogeneous film with an atomically smooth vacuum surface and atomically sharp substrate interface is found having very small in-plane tensile strain and mild out-of-plane compressive strain. First-principles theoretical calculations are applied in order to ascertain the lowest energy models for both the Mn 3 GaN surface and the Mn 3 GaN/MgO film/substrate interface. Models including MnGa versus MnN surface layers and MnGa versus MnN interfacial layers are considered as functions of both the Mn and Ga chemical potentials. The predictions are discussed in comparison to the experimental results. The overall findings suggest that Mn 3 GaN on MgO(001) is a viable epitaxial film which can be further explored in connection with antiferromagnetic spintronics.

Density functional theory↗

DOE OSTI2024

Morphological Evolution and Dealloying During Corrosion of Ni20Cr (wt.%) in Molten FLiNaK Salts

The dealloying corrosion behavior of the FCC Ni20Cr (wt%) in molten LiF-NaF-KF (FLiNaK) salts at 600 °C under varying applied potentials was investigated. Using in-operando electrochemical techniques and a multi-modal suite of characterization methods, we connect electrochemical potential, thermodynamic stability, and electro-dissolution kinetics to the corrosion morphologies. Notably, under certain potential regimes, a micron-scale bicontinuous structure, characterized by a network of interconnected pores and ligaments riched with the composition of the more noble (MN) element, becomes prominent. At other potentials both MN and less noble (LN) elements dealloy but at different rates. The dealloying process consists of lattice and grain boundary diffusion of Cr to the metal/salt interface, interphase Cr oxidation, accompanied by surface diffusion of Ni to form interconnected ligaments. At higher potentials, the bicontinuous porous structure undergoes further surface coarsening. Concurrently, Cr(II), Cr(III), and Ni(II) begin to dissolve, with the dissolution of Ni occurring at a significantly slower rate. When solid-state transport of Cr is exceeded by the interfacial rates, dealloying depths are limited.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Foundational Science to Accelerate Nuclear Energy Innovation [Brochure]

The foundational science gaps inhibiting the advancement of nuclear energy technologies are identified and tackled in five priority research opportunities. These opportunities pave the way to accelerate the development and ultimately the adoption of new nuclear energy systems. They include the fundamental aspects of ion-electron interactions; novel properties of next-generation coolants and solvents; interfacial dynamics, not only in solids, but in other aspects of nuclear reactors; novel operando and in-situ monitoring and sensing; and artificial intelligence to accelerate condensed phases discovery. Building on the foundation established by previous BES workshops, these opportunities encompass recent advances in fundamental knowledge and focus on the experimental and computational methods needed to resolve major technical challenges for nuclear energy technologies. Through developing fundamental scientific insight as well as pushing the frontiers of modeling complex systems and probing the operation of materials and chemical systems in extreme environments, research motivated by the priorities identified here will further develop the promise, potential, and utilization of nuclear energy for a clean energy future. The PROs are as follows: (1) Master complex electronic structures to tailor thermochemical reactivity, transport, and microstructural evolution; (2) Interrogate and direct the physics and chemistry underpinning next-generation coolants and solvents; (3) Elucidate and control the underlying physics and chemistry of interfaces in complex nuclear environments; (4) Bridge multi-fidelity multi-resolution experiments, computational modeling, and data science to control dynamic behavior; and (5) Harness artificial intelligence to design inherently resilient condensed phases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Multi-stage load partitioning in additively manufactured Al6061+TiC nanocomposite characterized by in-situ neutron diffraction

Metal matrix composites (MMCs), combining metal matrix and ceramic particles, exhibit high mechanical strength and stiffness compared to conventional metallic materials. During fusion-based additive manufacturing (AM), MMCs undergo a rapid heating and cooling thermal history, which affects the interfacial bonding, thermal misfit stress and mechanical load transfer behavior between the metal matrix and particles, thus impacting the bulk mechanical performance. Here, we investigate the deformation dynamics and phase-specific load transfer in fusion-based AMed Al6061 +TiC MMCs through in-situ neutron diffraction. By calculating the phase-specific lattice strains, a multi-stage load transfer and deformation behavior during uniaxial compression is revealed: (1) elastic deformation in Stage I for both phases; (2) sudden stress rebalance between two phases in Stage II, evidenced by a sudden decrease in Al lattice strain and increase in TiC; (3) active load carrying by both phases in Stage III, with both phases experiencing an increase in lattice strains. Further, the deformation mechanism of each stage is deducted by correlating the evolutions of the interphase stresses and peaks’ broadening and intensity of the Al matrix. The local plastic deformation of the Al matrix near the phase interface is triggered and leads to stress rebalancing in Stage II. The global plastic deformation subsequently propagates throughout the Al matrix in Stage III, and the composite is further hardened through both dislocation multiplication and load transfer. The findings offer valuable insights into deformation and load-sharing behavior in AMed MMCs.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Maintaining a Flat Li Surface during the Li Stripping Process via Interface Design

Electroplating has been the main focus in mitigating the dendrite growth on the Li-metal electrode; however, the stripping process is equally critical, since the nonsmooth Li surface during stripping will lead to nonuniform local current density, planting the seeds for dendrite growth. In this paper, density functional theory (DFT) and kinetic Monte Carlo (KMC) techniques were combined to investigate the vacancy evolution in Li interfaced with different solid–electrolyte interphase (SEI) materials. It was found that the lithiophilic interface, such as Li/Li 2 O, repels vacancies into the bulk Li, so Li atoms can quickly fill the Li vacancies near the Li/Li 2 O interface and maintain a smooth Li surface. In contrast, the lithiophobic interface, such as Li/LiF, traps Li vacancies toward the interface, and the accumulated Li vacancies form voids and roughen the surface. The predicted critical stripping current density, below which a smooth Li surface will be maintained, is therefore much faster at the lithiophilic interface than that at the lithiophobic interface. It was further revealed that the lithiophilicity at different SEI or coating materials can be ranked as Li/Li 2 O > Li/LiPON > Li/Li 2 CO 3 > Li/LiF based on the calculated interfacial adhesion and accumulation of electron density at the interface. Furthermore, this suggests that interface and coating design at nanoscale can be effective for maintaining a smooth Li surface during the stripping process, solving another challenge to achieving a dendrite-free Li-metal electrode in both liquid and solid electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Insights into the Dynamic Interfacial and Bulk Composition of Copper-Modified, Hydrogen-Alloyed, Palladium Nanocubes under Electrocatalytic Conditions

Understanding and controlling the alloying properties of nanomaterials under electrochemical conditions are critically important for fields ranging from energy storage and catalysis to electrochromic window technology. Hydrogen-absorbing nanomaterials, like palladium, are especially interesting due to their ability to reversibly absorb and store hydrogen in their lattice at near-stoichiometric amounts. Palladium’s work function is also significantly deeper than that of most transition metals, which enables electrochemical underpotential deposition of conformal monolayer and submonolayer amounts of transition metals onto the palladium surface. The simultaneous existence of these two properties is unique and opens new and exciting avenues for electrochemical applications. However, the intersection of surface-modified, hydrogen-alloyed palladium nanomaterials is poorly understood, and specifically, how these structures evolve during electrochemical operating conditions remains an open question. Here, we synthesize {100}-terminated palladium nanocubes and deposit between 0.5 and 22 monolayers of copper at the palladium surface. We then electrochemically alloy these surface-modified structures with hydrogen. Using a combination of analytical electrochemistry, spectroscopy, and microscopy, we track the positional evolution of the Cu at the surface of Pd, its impact on palladium’s ability to absorb hydrogen, and copper’s effect on hydrogen evolution electrocatalysis. We show that Cu readily alloys into the palladium nanocube at potentials more negative than the Cu 2+/0 deposition, but a 0.5 monolayer thick copper layer remains at the Pd surface regardless of potential. Finally, we discuss the implications of these findings within the framework of CO 2 reduction catalysis for carbon–carbon bond-forming chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1993

Three-dimensional numerical simulation of gradual opening in a wave rotor passage

The evolution of the contact interface and the propagation of compression waves inside a single wave rotor passage gradually opening to and traversing an inlet port is studied numerically using an inviscid formulation of the governing equations. Insights into the response of the interface and kinematics of the flow field to various opening times are given. Since the opening time is inversely proportional to the rotational speed of the rotor, the effects of passage rotation such as centripetal and Coriolis accelerations are intrinsically coupled to the gradual opening process. Certain three-dimensional features associated with the gradual opening process as a result of centripetal and Coriolis accelerations are illustrated. For the range of opening times or rotational speeds considered, a portion of the interface behaves like a vortex sheet that can degenerate into a complex interfacial structure. The vortices produced along the interface can serve as a stirring mechanism to promote local mixing. Coriolis and centripetal accelerations can introduce three dimensional effects such as interfacial distortions in meridional planes and spanwise migration of fluid elements.

Larosiliere, Louis M.↗

NASA NTRS1993

Three-dimensional numerical simulation of gradual opening in a wave rotor passage

Larosiliere, Louis M.↗

DOE OSTI2021

The Impact of Sintering Atmosphere and Temperature on the Phase Evolution of High Surface Area LSCF Prepared by In Situ Carbon Templating

The thermochemical stability of lanthanum strontium cobalt ferrite (LSCF) processed between 1000 °C–1200 °C via the in situ carbon templating method was studied. This method generates high surface area ceramics at traditional solid oxide fuel cell (SOFC) sintering temperatures by generating a carbon template in situ and subsequently removing the template by oxidation at 700 °C. Argon processed samples produced an amorphous carbon template, whereas nitrogen tended to form graphitic carbon. Prior to the oxidation step, nitrogen samples comprised larger La 2 O 3 crystallites (22–40 nm) compared to argon (9–17 nm). Upon oxidation, argon samples resulted in a pure LSCF phase with surface areas in the 21–29 m 2 ·g −1 range, whereas nitrogen samples contained significant impurities. This demonstrates that the size of La 2 O 3 crystallites formed during inert processing limited the ability to produce a pure LSCF phase. Symmetrical cells comprising nano-LSCF electrodes generated by the templating method were compared to cells sintered directly in air. Impedance results suggest that nano-LSCF cells and cells processed in air were dominated by interfacial charge transfer resistance and gas diffusion, respectively. The results map out conditions for preparing and integrating high surface area, nanostructured LSCF into SOFC electrodes at traditional sintering temperatures. Strategies for improving the interfacial resistance of nano-LSCF electrodes are discussed.

Muhoza, Sixbert P. (ORCID:0000000299864241)↗

DOE OSTI2020

Constitutional under-potential plating (CUP) – New insights for predicting the morphological stability of deposited lithium anodes in lithium metal batteries

Lithium (Li) cycling in lithium metal batteries (LMBs) inevitably witnesses a non-planar Li/electrolyte interface (cellular/dendritic microstructure) affecting the performance, safety and reliability of LMBs. Herein, the “constitutional under-potential plating” (CUP) concept is presented for the first time to understand the evolution, formation and predict the morphological stability/instability of the Li/electrolyte interface. Here, the CUP condition, a measure of the driving force for interface perturbation, occurs when the true potential gradient at the interface is smaller than the equilibrium electrodeposition potential gradient at the Li/electrolyte interface resulting in the electrolyte ahead of the Li-electrolyte interface to be in an under-potential state. Detailed CUP criterion calculations conducted herein establishes the relationship of battery operating conditions (e.g. current density, potential gradient) with the electrolyte properties (e.g. Li-ion transference number and diffusion coefficient) predicting the morphological stability condition at the interface. In addition to the driving force for interface perturbation, the capillarity effect or the Gibbs Thomson effect, a measure of the resistance to perturbation of the perturbed interface is discussed for understanding the influence of interfacial energy/adhesion energy between the current collector and the deposited Li on the overall morphological stability of the Li/electrolyte interface, a critical criterion for the unwanted dendritic morphology.

25 ENERGY STORAGE↗

DOE OSTI2021

Design Principles for Efficient and Stable Water Splitting Photoelectrocatalysts

Photoelectrochemical water splitting is a promising avenue for sustainable production of hydrogen used in the chemical industry and hydrogen fuel cells. The basic components of most photoelectrochemical water splitting systems are semiconductor light absorbers coupled to electrocatalysts, which perform the desired chemical reactions. A critical challenge for the design of these systems is the lack of stability for the majority of desired semiconductors under operating water splitting conditions. One strategy to address this issue is to protect the semiconductor by covering it with a stabilizing insulator layer, creating a metal–insulator–semiconductor (MIS) architecture, which has demonstrated improved stability. In addition to enhanced stability, the insulator layer may significantly affect the electron and hole transfer, which governs the recombination rates. Furthermore, the insertion of an insulator layer leads to the introduction of additional insulator/electrocatalyst and insulator/semiconductor interfaces. These interfaces can impact the system’s performance significantly, and they need to be carefully engineered to optimize the efficiencies of MIS systems. In this Account, we describe our recent progress in shedding light on the critical role of the insulator and the interfaces on the performance of MIS systems. We discuss our findings by focusing on the concrete example of planar n-type Si protected by a HfO 2 insulator layer and coupled to a Ni or Ir electrocatalyst that performs the oxygen evolution reaction, one of the water splitting half-reactions. To improve our fundamental understanding of the insulator layer, we precisely control the HfO 2 insulator thickness using atomic layer deposition (ALD), and we perform a series of rigorous electrochemical experiments coupled with theory and modeling. We demonstrate that by tuning the insulator thickness, we can control the flux and recombination of photogenerated electrons and holes to optimize the generated photovoltage. Despite optimizing the thickness, we find that the maximum generated photovoltage in MIS systems is often significantly lower than the upper performance limit, i.e., there are additional losses in the system that could not be addressed by optimizing the insulator thickness. We identify the sources of these losses and describe strategies to minimize them by a combination of improving the semiconductor light absorption, removing nonidealities associated with interfacial defects, and finding alternative insulators with improved charge carrier selectivity. Finally, we quantify the improvements that can be obtained by implementing these specific strategies. Our collective work outlines strategies to analyze MIS systems, identify the sources of efficiency losses, and optimize the design to approach the fundamental performance limits. Furthermore, these general approaches are broadly applicable to photoelectrochemical materials that utilize sunlight to produce value-added chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

From Powder to Power: Tailored Pre-Milling Strategy that Optimizes Microstructure for Efficient Hydrogen Evolution

The hydrogen evolution reaction (HER) plays a critical role in enabling large-scale electrolytic hydrogen production and advancing future technologies and fuel production. Among non-precious metals, NiMo-based catalysts are particularly attractive due to their capability to promote both water dissociation and hydrogen adsorption in alkaline media. However, conventional NiMo catalysts often suffer from incomplete alloying, particle aggregation, weak metal–support interactions, and surface oxidation, which significantly limit active site utilization, electronic conductivity, and long-term stability. Herein, we report a scalable, solid-state, two-step ball milling strategy for constructing an efficient NiMo/C catalyst for the HER. Pre-milling the metal precursors prior to carbon incorporation promotes efficient solid-state activation, leading to the formation of uniformly alloyed, ultrafine, and defect-rich Ni–Mo nanoparticles with robust metal–carbon interfacial anchoring. Benefiting from this integrated structural design, the optimized NiMo/C catalyst exhibits low overpotentials and Tafel slopes, reduced charge-transfer resistance, and excellent durability under alkaline conditions. Comprehensive structural and surface analysis reveal that the enhanced HER performance can be attributed to the synergistic interplay of homogeneous Ni–Mo alloying, uniform nanoparticle dispersion on a defect-rich carbon scaffold, enhanced accessibility of catalytically active sites, and optimized electronic coupling that stabilizes the catalyst surface. This work highlights the two-step solid-state ball milling strategy as a simple, robust, and scalable route for the preparation of effective and durable non-precious metal HER electrocatalysts, offering practical insights toward large-scale and inexpensive hydrogen production.

Yang, Xiaoxuan [Oak Ridge National Laboratory (ORN↗