Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intercalation materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structure and Dynamics of Aqueous Electrolytes Confined in 2D-TiO 2 /Ti 3 C 2 T 2 MXene Heterostructures

The synthesis of heterostructures of different two-dimensional (2D) materials offers an approach to combine advantages of different materials constituting the heterostructure and ultimately enhance their performance for applications such as electrochemical energy storage, achieving high energy, and high-power densities. Understanding the behavior of ions and solvents in confinement between these dissimilar layers is critical to understand their performance and control. Considering aqueous electrolytes, we explore the heterostructure of 2D lepidocrocite-type TiO 2 (2D-TiO 2 ) and hydroxylated or O-terminated Ti 3 C 2 MXene using ReaxFF molecular dynamics simulations and elastic/quasielastic neutron scattering techniques. Simulating a bilayer water intercalation, we find that the extent of interlayer hydration is impacted most by the surface terminations on the MXene and is marginally affected by 2D-TiO 2 . However, the introduction of 2D-TiO 2 decreases the water self-diffusion due to the notch sites (i.e., surface oxygen ridges) entrapping water molecules. Intercalating alkali cations into the heterostructures, we find that Li + is predominantly adsorbed at the 2D-TiO 2 surface instead of the MXenes with the preferential occupation of the notch sites. In contrast, Na+ forms a planar solvation with water, while K + is adsorbed both at the O-terminated MXene and 2D-TiO 2 . This behavior is altered when OH-terminated MXene is involved—the repulsion from the protons on the MXene surface forces the K + ions to be adsorbed exclusively to 2D-TiO 2 , while Na + retains some of its solvation in the water layer due to its smaller size. In OH-terminated MXenes, we see a consistent transfer of protons from the MXene surface toward 2D-TiO 2 , implying a greater capacity to store protons in the heterostructures. Of the three cations simulated, Na + hinders the proton migration the least and Li + the most because of its position near the 2D-TiO 2 surface. Furthermore, 2D-TiO 2 /MXene heterostructures are likely to exhibit a higher energy density but lower power density, especially with Na + intercalation.

25 ENERGY STORAGE↗
DOE OSTI2021

UiO-66 Metal–Organic Framework as an Anode for a Potassium-Ion Battery: Quantum Mechanical Analysis

The natural abundance of potassium in the earth’s crust is 1000 times higher than that of lithium, so energy technologies built on potassium are more sustainable. Potassium-ion batteries have attracted considerable attention because of their relatively low cost and high operating potential, but questions remain about the best anode material for such batteries. Here, in this paper, we report first-principles computations based on density functional theory to investigate the performance of the UiO-66 metal–organic framework as an anode material for potassium-ion batteries; the goal is to provide a fundamental understanding of metal–organic framework (MOF)-based electrodes to guide the design and development of high-performance potassium-ion batteries. Our study includes the stability and electronic properties of potassiated structures and the mechanisms of potassium intercalation and diffusion in the framework. The results indicate that UiO-66 has a maximum specific capacity of 644 mAh/g as the anode of a potassium-ion battery. During potassiation, we observe charge transfer from potassium to carbon or oxygen of UiO-66 near the intercalated K. During K diffusion, the K migrates along the UiO-66 framework with a maximal migration energy barrier of 0.377 eV in the optimal pathway, which is much lower than the barriers for Li and Na diffusion in UiO-66. The diffusion coefficient of K in the anode is several orders of magnitude larger than those of Li and Na. This favors potassium ions over lithium ions or sodium ions when UiO-66 is the anode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Complex defect chemistry of hydrothermally-synthesized Nb-substituted β$'$-LiVOPO 4

Lithium vanadyl phosphate (LiVOPO 4 ) is a next-generation multielectron battery cathode that can intercalate up to two Li-ions per V-ion through the redox couples of V 4+ /V 3+ and V 5+ /V 4+ . However, its rate capacity is undermined by the sluggish Li-ion diffusion in the high-voltage region (4 V for V 5+ /V 4+ redox). Nb substitution was used to expand the crystal lattice to facilitate Li-ion diffusion. Here, in this work, Nb substitution was achieved via hydrothermal synthesis, which resulted in a new, lower symmetry β'-LiVOPO 4 phase with preferential Nb occupation of one of the two V sites. This phase presents complex defect chemistries, including cation vacancies and hydrogen interstitials, characterized by a combination of X-ray and neutron diffraction, elemental and thermogravimetric analyses, X-ray absorption spectroscopy, and magnetic susceptibility measurements. The Nb-substituted samples demonstrated improved capacity retention and rate capabilities in the high-voltage region, albeit an enlarged voltage hysteresis related to a partial V 4+ /V 3+ redox reaction, as evidenced by ex situ X-ray absorption spectroscopy and pair distribution function analysis. This work highlights the importance of understanding the complex defect chemistry and its consequence on electrochemistry in polyanionic intercalation compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct recycling and remanufacturing of anode scraps

With the rapid expansion of Li-ion battery production, significant amounts of electrode scraps that need to be recycled are being produced during cell manufacturing. Anode scrap that comprises critical materials such as graphite and valuable Cu should be recycled and reintegrated into the battery supply chain. This study reports a simple yet efficient water-based recovery process for delaminating anode films from Cu foils through the intercalation of water between the hydrophilic Cu foil and hydrophobic anode coating. Because of the absence of harsh chemicals, the recovered anode films and Cu foils are battery grade and free of damage in terms of physical and chemical properties. This study also demonstrates the reprocessing of those anode films into a new anode that exhibits electrochemical performance similar to that of the pristine anode. We report this environmentally friendly and cost-effective separation technique allows battery manufacturers to directly recycle and reuse their electrode scraps safely and effectively on-site.

25 ENERGY STORAGE↗
DOE OSTI2022

Electrochemical Sodiation Mechanism in Magnetite Nanoparticle-Based Anodes: Understanding of Nanoionics-Based Sodium Ion Storage Behavior of Fe 3 O 4

We report electrochemical ion storage behaviors of Fe 3 O 4 nanoparticles, as a representative transition metal oxide for an environmentally benign and low-cost anode for a sodium-ion battery, are thoroughly investigated through a combination of electrochemical analysis and diagnostics of Fe 3 O 4 electrode cells, X-ray-based and spectroscopic analysis of material structure evolution as functions of depth of discharge (DoD) and state of charge (SoC), and first principle modeling. The gravimetric capacity is found to be 50 mA h/g for bulk Fe 3 O 4 (50 nm average crystallite size) and 100 mA h/g--about a tenth of the theoretical prediction for complete conversion--for Fe 3 O 4 nanoparticles (8.7 nm average particle size), respectively. A fundamental and mechanistic study of material evolution as functions of DoD and SoC shows that Fe 3 O 4 does not allow electrochemical incorporation of Na + ions into the empty cation positions of the inverse spinel structure, leading to our assertion that electrochemical intercalation of Na + ions to conversion of the Fe 3 O 4 anode in sodium-ion batteries is nonviable. A density functional theory investigation points to the impracticality of the intercalation of Na + ions into Fe 3 O 4 and further validates our experimental findings. We propose several possible mechanisms corresponding to the observed low capacity, including formation of solid electrolyte interphases with unfavorable properties and adsorption of Na + ions onto surfaces of nanoparticles and/or at heterointerfaces in Fe 3 O 4 composite electrodes in a NaPF 6 -based electrolyte system.

25 ENERGY STORAGE↗
DOE OSTI2021

Coulombically-stabilized oxygen hole polarons enable fully reversible oxygen redox

Stabilizing high-valent redox couples and exotic electronic states necessitates an understanding of the stabilization mechanism. In oxides, whether they are being considered for energy storage or computing, highly oxidized oxide-anion species rehybridize to form short covalent bonds and are related to significant local structural distortions. In intercalation oxide electrodes for batteries, while such reorganization partially stabilizes oxygen redox, it also gives rise to substantial hysteresis. In this work, we investigate oxygen redox in layered Na 2-x Mn 3 O 7 , a positive electrode material with ordered Mn vacancies. We prove that coulombic interactions between oxidized oxide-anions and the interlayer Na vacancies can disfavor rehybridization and stabilize hole polarons on oxygen (O-) at 4.2 V vs. Na/Na + . These coulombic interactions provide thermodynamic energy saving as large as O–O covalent bonding and enable ~40 mV voltage hysteresis over multiple electrochemical cycles with negligible voltage fade. As such, our results establish a complete picture of redox energetics by highlighting the role of coulombic interactions across several atomic distances and suggest avenues to stabilize highly oxidized oxygen for applications in energy storage and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Elucidating the mechanism underlying the augmented capacity of MoO 2 as an anode material in Li-ion batteries

Transition-metal oxide anode materials have been observed to possess an intriguing surplus of capacity beyond the expected values based on conversion reaction. However, the mechanisms behind this phenomenon have remained contentious and elusive. Here, this study focuses on synthesized nanosized molybdenum dioxide and its electrochemical performance as an anode material for Li-ion batteries. Our findings reveal a substantial increase in capacity upon cycling, achieving approximately 1688 mA h g -1 , nearly double the theoretical capacity, after 700 cycles at a 1C rate. To elucidate the mechanisms underlying this augmented capacity, a comprehensive analysis employing in situ and ex situ X-ray diffraction, X-ray absorption spectroscopy, scanning electron microscopy, and transmission electron microscopy was conducted at various stages of the Li-ion cell cycling. Our results indicate that no conversion reaction occurs during the initial discharge phase, with Li 2 O and Mo remaining undetected. Instead, Li 0.98 MoO 2 is generated upon lithiation. Further materials characterization employing electron energy loss spectroscopy and energy-dispersive X-ray spectroscopy on the cycled electrode suggests the potential formation of a metallic Li-rich layer at the interface of the Li-ion intercalated phase subsequent to the formation of Li 0.98 MoO 2 , contributing to the surplus Li storage. Moreover, electrochemical impedance spectroscopy coupled with ex situ SEM and TEM analyses reveals that alterations in particle size and morphology, along with changes in the solid electrolyte interphase (SEI) resistance, are instrumental in the capacity variation observed upon cycling.

25 ENERGY STORAGE↗
DOE OSTI2021

A Glance of the Layered Transition Metal Oxide Cathodes in Sodium and Lithium-ion Batteries: Difference and Similarities

The fast-growing demand of energy storage devices has prompted diverse battery techniques, while the state-of-the-art Li-ion batteries (LIBs) continue to flourish, Na-ion batteries (SIB) have been identified to be a promising alternative to share the burden with LIBs, particularly for large scale grid storage applications. Both LIBs and SIBs techniques work based on similar fundamental mechanisms, with a heavy focus on intercalation chemistry of layered transition metal (TM) oxides. However, the differences between Li-ion and Na-ion in terms of their size and Lewis acidity induce many different behaviors when crystallizing or diffusing in layered cathode materials. This minireview summarizes some typical cases where Li and Na-ion differ in layered cathode materials and discusses potential approaches to leverage their similarities and dissimilarities for future developments of high-performance Na-ion batteries.

Xiao, Biwei↗
DOE OSTI2022

Processing Compressed Expanded Natural Graphite for Phase Change Material Composites

Phase change materials (PCMs) are used in various thermal energy storage applications but are limited by their low thermal conductivity. One method to increase conductivity involves impregnating organic PCMs into highly porous conductive matrix materials. Of these materials, compressed expanded natural graphite (CENG) matrices have received the most attention. Despite this attention, the effect that CENG processing has on PCM saturation and overall matrix thermal conductivity has not been fully investigated. Therefore, the effect of the heat treatment process used to expand intercalated graphite flakes is evaluated here. Higher heat treatment temperatures yielded higher saturation rates and overall saturation at similar matrix porosities. For example, increasing temperature from 300 °C to 700 °C resulted in approximately 60%-70% increase in pore saturation after 100 minutes of soaking. The exposure time to heat treatment had less of an effect on PCM saturation. The exposure time had negligible effect above 30 min and above 500 °C heating temperatures. However, because the expanded graphite was found to oxidize around 700 °C, the use of longer exposure time in manufacturing applications can be beneficial if a shortened impregnation time is needed. Heat treatment conditions did not impact thermal conductivity. The composite latent heat of fusion was also reduced approximately proportionally to the PCM mass fraction. A local maximum in axial thermal conductivity was observed at around 83% porosity, which is similar to previous studies. The observed conductivity at this maximum was a factor of 81 times greater than the conductivity of the PCM.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Three-dimensional Zn-based alloys for dendrite-free aqueous Zn battery in dual-cation electrolytes

Aqueous zinc-ion batteries, in terms of integration with high safety, environmental benignity, and low cost, have attracted much attention for powering electronic devices and storage systems. However, the interface instability issues at the Zn anode caused by detrimental side reactions such as dendrite growth, hydrogen evolution, and metal corrosion at the solid (anode)/liquid (electrolyte) interface impede their practical applications in the fields requiring long-term performance persistence. Despite the rapid progress in suppressing the side reactions at the materials interface, the mechanism of ion storage and dendrite formation in practical aqueous zinc-ion batteries with dual-cation aqueous electrolytes is still unclear. Herein, we design an interface material consisting of forest-like three-dimensional zinc-copper alloy with engineered surfaces to explore the Zn plating/stripping mode in dual-cation electrolytes. The three-dimensional nanostructured surface of zinc-copper alloy is demonstrated to be in favor of effectively regulating the reaction kinetics of Zn plating/stripping processes. The developed interface materials suppress the dendrite growth on the anode surface towards high-performance persistent aqueous zinc-ion batteries in the aqueous electrolytes containing single and dual cations. This work remarkably enhances the fundamental understanding of dual-cation intercalation chemistry in aqueous electrochemical systems and provides a guide for exploring high-performance aqueous zinc-ion batteries and beyond.

25 ENERGY STORAGE↗
DOE OSTI2021

A layered nonstoichiometric lepidocrocite-type sodium titanate anode material for sodium-ion batteries

A lepidocrocite-structured sodium titanate prepared by ion-exchange of a Cs-containing precursor shows promise as an anode material for sodium ion batteries, with a discharge capacity of up to 229 mAh g -1 at an average potential of about 0.6 V vs. Na + /Na. Titanium vacancies in the metal oxide layers provide additional sites for sodium intercalation in addition to interlayer sites, which accounts for the higher capacity compared to other previously reported lepidocrocite-structured titanates. By screening a series of electrolyte formulations and binders, we were able to improve the first-cycle coulombic efficiency to 81.8% and 94.7% respectively using CMC/SBR-based and binder-free electrodes in ether electrolytes. Finally, the electrochemical consequences of short-term air-exposure on the electrodes are also discussed.

25 ENERGY STORAGE↗
DOE OSTI2020

High Capacity for Mg 2+ Deintercalation in Spinel Vanadium Oxide Nanocrystals

Nonaqueous Mg batteries can theoretically reach high energy density with cost-effective materials, yet no such device to date has performance competitive with Li-ion technologies. A major barrier is the need for oxide cathodes that combine high capacity and voltage. Very few oxides have shown intrinsic ability for Mg 2+ intercalation in electrolytes with acceptably low content of H2O. Herein, we demonstrate that nanocrystals of MgV 2 O 4 can reach high capacity for Mg 2+ deintercalation with a mechanism that preserves their spinel framework, validated through measurements with different chemical and structural sensitivity. The structural stability contrasts with other phases where reaching high capacity required distortions that introduce undesirable mechanical strain. The favorable properties of the oxide allowed cycling in a full cell with Mg metal. This work reveals new insights into the viability of multivalent intercalation in oxides, meeting a milestone toward the feasibility of high-voltage batteries with either Mg metal or Mg-ion anodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Phase Discovery and Selected Synthesis of Subvalent Niobium Tellurides Using a Polytelluride Flux Strategy

Transition metal subchalcogenides involve electron-rich metals and can facilitate an in-depth understanding of the relationships among quantum properties such as superconductivity, charge density wave, and topological band structures. However, effective experimental routes toward synthesizing transition metal subchalcogenides are still lacking, hindering the development of new quantum materials. Herein, we propose a eutectic polytelluride flux strategy as an excellent solution to address phase discovery and crystal growth in transition metal subtelluride systems. We report new phases easily and selectively synthesized using a eutectic “K 3 Te 4 ” polytelluride flux upon adjusting the ratio of Nb metal to flux in the starting materials (K/Nb/Te = 3:x:4). Using a high Nb content in the solvent (x = 2 and 1), crystals of KNb 3 Te 3 O 0.38 and K 0.9 Nb 3 Te 4 are obtained. Both subtellurides exhibit diverse Nb clusters, including face-sharing and edge-sharing Nb 6 octahedral columns and zig-zag Nb chains. Reducing the Nb content to x = 0.33 leads to the formation of a layered compound, K 1.06 NbTe 2 . This compound comprises a NbTe 6 trigonal prism with K intercalated between the layers. Single crystals of known binary Nb tellurides can also be grown using another eutectic flux “KTe 3 . 2 ”, and the obtained NbTe 2 exhibits a new polymorphism with extra trimerization along the b-axis in the Nb–Nb bonded double zig-zag cluster. Finally, precise control over the structural dimensionality and oxidation state, combined with the facile crystal growth process, makes our synthetic strategy an efficient route to explore quantum materials in transition metal subchalcogenides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Compositional phase stability of correlated electron materials within DFT+DMFT

Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics, requiring precise computations of total energies. In this work, we employ the density functional theory plus dynamical mean-field theory (DFT+DMFT) formalism to address local correlations due to transition metal $\textit{d}$ electrons on compositional phase stability in the prototype rechargeable battery cathode material Li x CoO 2 , and detailed comparisons are made with the simpler DFT+$\textit{U}$ approach (i.e., the Hartree-Fock solution of the DMFT impurity problem). Local interactions are found to strongly impact the energetics of the band insulator LiCoO 2 , most significantly via the $E_g$ orbitals, which are partially occupied via hybridization with $\textit{O p}$ states. We find CoO 2 and Li 1/2 CoO 2 to be moderately correlated Fermi liquids with quasiparticle weights of 0.6–0.8 for the $T_{2g}$ states, which are most impacted by the interactions. Further, as compared to DFT+$\textit{U}$, DFT+DMFT considerably dampens the increase in total energy as $\textit{U}$ is increased, which indicates that dynamical correlations are important to describe this class of materials despite the relatively modest quasiparticle weights. Unlike DFT+$\textit{U}$, which can incorrectly drive Li x CoO 2 toward spurious phase separating or charge-ordered states, DFT+DMFT correctly captures the system's phase stability and does not exhibit a strong charge-ordering tendency. Most importantly, the error within DFT+$\textit{U}$ varies strongly as the composition changes, challenging the common practice of artificially tuning $\textit{U}$ within DFT+$\textit{U}$ to compensate the errors of Hartree-Fock. DFT+DMFT predicts the average intercalation voltage decreases relative to DFT, opposite to the result of DFT+$\textit{U}$, which would yield favorable agreement with experiment in conjunction with the overprediction of the voltage by the strongly constrained and appropriately normed DFT functional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Reaction Mechanism of Electrodeposited ε-MnO 2 : A Proton-Centered Pathway in Aqueous Zn-Ion Systems

Aqueous Zn/MnO 2 batteries have garnered significant interests owing to their abundance, high theoretical specific capacity, safety, and low cost. However, large-scale application of these systems is limited by the incomplete understanding of the MnO 2 reaction chemistry. The different crystal lattice structures among MnO 2 polymorphs contribute to the variations in reported reaction mechanisms. Among them, ε-MnO 2 polymorph, the dominant phase in electrolytic manganese dioxide (EMD), is notably observed during the charge cycles of aqueous Zn/MnO 2 batteries. Here, in this work, we investigate the electrochemical behavior of an ε-MnO 2 cathode synthesized via electrodeposition from a ZnSO 4 and MnSO 4 electrolyte, onto a 3-dimensional carbon cloth substrate. Proton intercalation emerges as the dominant charge storage mechanism, critically enabling the reversibility of ε-MnO 2 during cycling, as revealed by operando synchrotron X-ray diffraction and X-ray absorption spectroscopy. Additionally, a proton-coupled dissolution/redeposition pathway operates alongside minor Zn 2+ intercalation, as quantified by Rietveld refinement. Morphological and chemical heterogeneities are studied by transmission X-ray microscopy further validates this reaction mechanism. These mechanistic insights provide the foundation for rationally designing Zn/MnO 2 batteries with optimized proton dynamics and charge transfer, advancing these systems as a viable solution for safe, cost-effective grid-scale energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗