SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lattice Boltzmann (LB) Method is a relatively new method for flow simulations. The start point of LB method is statistic mechanics and Boltzmann equation. The LB method tries to set up its model at molecular scale and simulate the flow at macroscopic scale. LBM has been applied to mostly incompressible flows and simple geometry.
Numerical simulations have been completed for a variety of designs for a 90 deg elbow duct. The objective is to identify a design that minimizes the dynamic load entering a LOX turbopump located at the elbow exit. Designs simulated to date indicate that simpler duct geometries result in lower losses. Benchmark simulations have verified that the compressible flow codes used in this study are applicable to these incompressible flow simulations.
Numerical techniques and solutions for compressible and incompressible laminar separated flows using time dependent finite difference equations
This report presents a viscous-inviscid calculation method for the prediction of turbulent incompressible flows in diffusers with small regions of stall. Integral turbulent boundary layer equations (BLE) are used to provide boundary conditions for a finite difference representation of the inviscid core. The BLE are applied at the floating displacement-thickness line, resulting in a simulataneous set of nonlinear block tridiagonal equations which are solved iteratively using a sucessive line-relaxation technique. Results of the method have been applied to calculate the performance of a variety of asymmetric stalled diffusers.
An implicit algorithm for the solution of three-dimensional, steady and unsteady, viscous, incompressible flows is presented. The algorithm is based on an upwind-relaxation finite-difference method. Steady-state solutions are carried out using a time-marching solution technique in combination with a local time-stepping strategy. To obtain time-accurate solutions, a subiterative procedure is employed at each physical time step using a global time step to ensure the divergence-free condition. Steady-state flows in several straight ducts and in a square duct with a 90-degree bend are computed and compared with analytical and experimental results. The classical problem of starting flow in a circular pipe is chosen to verify the time accuracy of the present scheme. Finally, the three-dimensional bubble-type vortex breakdown of a slender cylindrical vortex in an unbounded flow is investigated.
An accurate finite-difference scheme has been utilized to investigate oscillatory, laminar and incompressible flow between two-parallel-plates and in circular tubes. The two-parallel-plates simulate the regenerator of a free-piston Stirling engine (foil type regenerator) and the channel wall was included in the analysis (conjugate heat transfer problem). The circular tubes simulate the cooler and heater of the engine with an isothermal wall. The study conducted covered a wide range for the maximum Reynolds number (from 75 to 60,000), Valensi number (from 2.5 to 700), and relative amplitude of fluid displacement (0.714 and 1.34). The computational results indicate a complex nature of the heat flux distribution with time and axial location in the channel. At the channel mid-plane we observed two thermal cycles (out of phase with the flow) per each flow cycle. At this axial location the wall heat flux mean value, amplitude and phase shift with the flow are dependent upon the maximum Reynolds number, Valensi number and relative amplitude of fluid displacement. At other axial locations, the wall heat flux distribution is more complex.
The feasibility of remote in-flight boundary layer visualization via infrared in incompressible flow was established in earlier flight experiments. The past year's efforts focused on refining and determining the extent and accuracy of this technique of remote in-flight flow visualization via infrared. Investigations were made into flow separation visualization, visualization at transonic conditions, shock visualization, post-processing to mitigate banding noise in the NITE Hawk's thermograms, and a numeric model to predict surface temperature distributions. Although further flight tests are recommended, this technique continues to be promising.
A transport equation for the root-mean-square pressure fluctuations of turbulent flow is derived from the time-dependent momentum equation for incompressible flow. Approximate modeling of this transport equation is included to relate terms with higher order correlations to the mean quantities of turbulent flow. Three empirical constants are introduced in the model. Two of the empirical constants are estimated from homogeneous turbulence data and wall pressure fluctuations measurements. The third constant is determined by comparing the results of large eddy simulations for a plane channel flow and an annulus flow.
The strongly nonlinear area of theory is discussed, as well as linear and weakly nonlinear (i.e., perturbation) theories, and it is noted that the weaknesses of the weakly nonlinear theory are essentially the inappropriate formulation in earlier works and the lack of guidance for the choice of the lowest-order basis. Attention is focused on the areas of theoretical/numerical development contributing to understanding the transition mechanism and new means for analyzing and predicting transition quantitatively. The nonlinear stability of nonparallel flows, linear secondary instability, and nonlinear wave interaction are analyzed. The incompressible flow over a flat plate with zero-pressure gradient is chosen as an example, while applications range to other shear flows including three-dimensional and compressible boundary layers.
A semielliptic formulation, termed the interacting parabolized Navier-Stokes (IPNS) formulation, is developed for the analysis of a class of subsonic viscous flows for which streamwise diffusion is negligible but which are significantly influenced by upstream interactions. A two-step alternating-direction-explicit numerical scheme is developed to solve the resulting governing equations efficiently. The quasi-linearization and discretization of the equations are carefully examined so that no artificial viscosity is added externally to the scheme. Various simple channel and cascade flow configurations are examined for several values of Re, thickness ratio and Mach number, in order to establish the applicability of the IPNS model for these flows. With this model, solutions to compressible as well as nearly incompressible flows are obtained without any modification either in the analysis or in the solution procedure.
The factorizable discretization of Sidilkover for the compressible Euler equations previously demonstrated for channel flows has been extended to external flows.The dissipation of the original scheme has been modified to maintain stability for moderately stretched grids. The discrete equations are solved by symmetric collective Gauss-Seidel relaxation and FAS multigrid. Unlike the earlier work ordering the grid vertices in the flow direction has been found to be unnecessary. Solutions for essential incompressible flow (Mach 0.01) and supercritical flows have obtained for a Karman-Trefftz airfoil with it conformally mapped grid,as well as a NACA 0012 on an algebraically generated grid. The current work demonstrates nearly 0(n) convergence for subsonic and slightly transonic flows.
Prandtl (1946) has concluded that for yawed laminar incompressible flows the streamwise flow is independent of the spanwise flow. However, Ashkenas and Riddell (1955) have reported that for turbulent flow the 'independence principle' does not apply to yawed flat plates. On the other hand, it was also found that this principle may be applicable to many turbulent flows. As the sweep angle is increased, a sweep angle is reached which defines the interval over which the 'independence principle' is valid. The results obtained in the present investigation indicate the magnitude of the critical angle for subsonic turbulent flow over a swept rearward-facing step.
This paper deals with a brief description of transition problems arising on swept wings in incompressible flow. Two transition processes are discussed: the cross-flow instability, and the leading-edge contamination.
Several incompressible Navier-Stokes solution methods for obtaining steady and unsteady solutions are discussed. Special attention is given to internal flows which involve distinctly different features from external flows. The characterisitcs of the flow solvers employing the method of pseudocompressibility and a fractional step method are briefly described. This discussion is limited to a primitive variable formulation in generalized curvilinear coordinates. Computed results include simple test cases and internal flow in the Space Shuttle main engine hot-gas manifold.
The current capability of the finite element method for solving problems of viscous flow is reviewed. Much work has been directed to the simulation of incompressible flows and the relevant features are described. The methods available for, and the problems associated with, the finite element solution of high speed viscous compressible flows are analyzed. A plan for developing finite element research in this area with experimental support is presented.
Consideration is given to the impulse response of a laminar boundary layer and receptivity; numerical transition to turbulence in plane Poiseuille flow; large eddy simulation of turbulent wake flow; a viscous model and loss calculation of a multisplitter cascade; vortex initiation during dynamic stall of an airfoil; a numerical analysis of isothermal flow in a combustion chamber; and compressible flow calculations with a two-equation turbulence model and unstructured grids. Attention is also given to a 2D calculation of a buoyant flow around a burning sphere, a fast multigrid method for 3D turbulent incompressible flows, a streaming flow induced by an oscillating cascade of circular cylinders, an algebraic multigrid scheme for solving the Navier-Stokes equations on unstructured meshes; and nonlinear coupled multigrid solutions to thermal problems employing different nodal grid arrangements and convective transport approximations.
It is found through two-dimensional temporal simulations of high-speed free shear layers that mean flow distortion is significantly increased when supersonic disturbances are introduced as initial conditions. The shear layer exhibits no subharmonic growth or roll-up, but rather a spectral broadening as energy is distributed into higher harmonics. Increasing the velocity of one side of the mixing layer (u2) to roughly 1/5 the speed of the high speed side (u1), allows a slight subharmonic growth at a very slow rate for two-dimensional modes. A first look at three-dimensional free shear flows is also presented for M = 2. No effect is seen for incompressible flow; however, stabilization is seen with respect to maximum temporal growth rates as the transverse velocity is increased. A much stronger, but similar effect is seen if u2 is increased. The wave direction of maximum growth for u2 is greater than 0.4 is found to be the direction of the faster stream (u1) over a broad range of transverse velocities.
The traditional design and analysis practice for advanced propulsion systems, particularly chemical rocket engines, relies heavily on expensive full-scale prototype development and testing. Over the past decade, use of high-fidelity analysis and design tools such as CFD early in the product development cycle has been identified as one way to alleviate testing costs and to develop these devices better, faster and cheaper. Increased emphasis is being placed on developing and applying CFD models to simulate the flow field environments and performance of advanced propulsion systems. This necessitates the development of next generation computational tools which can be used effectively and reliably in a design environment by non-CFD specialists. A computational tool, called Loci-STREAM is being developed for this purpose. It is a pressure-based, Reynolds-averaged Navier-Stokes (RANS) solver for generalized unstructured grids, which is designed to handle all-speed flows (incompressible to hypersonic) and is particularly suitable for solving multi-species flow in fixed-frame combustion devices. Loci-STREAM integrates proven numerical methods for generalized grids and state-of-the-art physical models in a novel rule-based programming framework called Loci which allows: (a) seamless integration of multidisciplinary physics in a unified manner, and (b) automatic handling of massively parallel computing. The objective of the ongoing work is to develop a robust simulation capability for combustion problems in rocket engines. As an initial step towards validating this capability, a model problem is investigated in the present study which involves a gaseous oxygen/gaseous hydrogen (GO2/GH2) shear coaxial single element injector, for which experimental data are available. The sensitivity of the computed solutions to grid density, grid distribution, different turbulence models, and different near-wall treatments is investigated. A refined grid, which is clustered in the vicinity of the solid walls as well as the flame, is used to obtain a steady state solution which may be considered as the best solution attainable with the steady-state RANS methodology. From a design point of view, quick turnaround times are desirable; with this in mind, coarser grids are also employed and the resulting solutions are evaluated with respect to the fine grid solution.