Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “identity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

CaMn 3 IV O 4 Cubane Models of the Oxygen‐Evolving Complex: Spin Ground States S <9/2 and the Effect of Oxo Protonation

Abstract We report the single crystal XRD and MicroED structure, magnetic susceptibility, and EPR data of a series of CaMn 3 IV O 4 and YMn 3 IV O 4 complexes as structural and spectroscopic models of the cuboidal subunit of the oxygen‐evolving complex (OEC). The effect of changes in heterometal identity, cluster geometry, and bridging oxo protonation on the spin‐state structure was investigated. In contrast to previous computational models, we show that the spin ground state of CaMn 3 IV O 4 complexes and variants with protonated oxo moieties need not be S =9/2. Desymmetrization of the pseudo ‐ C 3 ‐symmetric Ca(Y)Mn 3 IV O 4 core leads to a lower S =5/2 spin ground state. The magnitude of the magnetic exchange coupling is attenuated upon oxo protonation, and an S =3/2 spin ground state is observed in CaMn 3 IV O 3 (OH). Our studies complement the observation that the interconversion between the low‐spin and high‐spin forms of the S 2 state is pH‐dependent, suggesting that the (de)protonation of bridging or terminal oxygen atoms in the OEC may be connected to spin‐state changes.

Lee, Heui Beom↗
DOE OSTI2021

Enhanced Selectivity and Stability of Finned Ferrierite Catalysts in Butene Isomerization

Abstract Designing zeolite catalysts with improved mass transport properties is crucial for restrictive networks of either one‐ or two‐dimensional pore topologies. Here, we demonstrate the synthesis of finned ferrierite (FER), a commercial zeolite with two‐dimensional pores, where protrusions on crystal surfaces behave as pseudo nanoparticles. Catalytic tests of 1‐butene isomerization reveal a 3‐fold enhancement of catalyst lifetime and an increase of 12 % selectivity to isobutene for finned samples compared to corresponding seeds. Electron tomography was used to confirm the identical crystallographic registry of fins and seeds. Time‐resolved titration of Brønsted acid sites confirmed the improved mass transport properties of finned ferrierite compared to conventional analogues. These findings highlight the advantages of introducing fins through facile and tunable post‐synthesis modification to impart material properties that are otherwise unattainable by conventional synthesis methods.

Dai, Heng↗
DOE OSTI2023

Insights into the Oxidative Degradation Mechanism of Solid Amine Sorbents for CO 2 Capture from Air: Roles of Atmospheric Water

Abstract Direct air capture (DAC) processes for extraction of CO 2 from ambient air are unique among chemical processes in that they operate outdoors with minimal feed pretreatments. Here, the impact of humidity on the oxidative degradation of a prototypical solid supported amine sorbent, poly(ethylenimine) (PEI) supported on Al 2 O 3 , is explored in detail. By combining CO 2 adsorption measurements, oxidative degradation rates, elemental analyses, solid‐state NMR and in situ IR spectroscopic analysis in conjunction with 18 O labeling of water, a comprehensive picture of sorbent oxidation is achieved under accelerated conditions. We demonstrated that the presence of water vapor can play an important role in accelerating the degradation reactions. From the study we inferred the identity and kinetics of formation of the major oxidative products, and the role(s) of humidity. Our data are consistent with a radical mediated autooxidative degradation mechanism.

Carneiro, Juliana S. A.↗
DOE OSTI2023

Direct Insertion Polymerization of Ionic Monomers: Rapid Production of Anion Exchange Membranes

Abstract The limited number of methods to directly polymerize ionic monomers currently hinders rapid diversification and production of ionic polymeric materials, namely anion exchange membranes (AEMs) which are essential components in emerging alkaline fuel cell and electrolyzer technologies. Herein, we report a direct coordination‐insertion polymerization of cationic monomers, providing the first direct synthesis of aliphatic polymers with high ion incorporations and allowing facile access to a broad range of materials. We demonstrate the utility of this method by rapidly generating a library of solution processable ionic polymers for use as AEMs. We investigate these materials to study the influence of cation identity on hydroxide conductivity and stability. We found that AEMs with piperidinium cations exhibited the highest performance, with high alkaline stability, hydroxide conductivity of 87 mS cm −1 at 80 °C, and a peak power density of 730 mW cm −2 when integrated into a fuel cell device.

Hsu, Jesse H.↗
DOE OSTI2024

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Abstract Vapor‐phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

Kwon, Ohsung↗
DOE OSTI2020

Single-Atom Electrocatalysts from Multivariate MOFs for Highly Selective Reduction of CO 2 at Low Pressures

Single-atom catalysts (SACs) are of great interest because of their ultrahigh activity and selectivity. However, it is difficult to construct model SACs according to a general synthetic method, and therefore, discerning differences in activity of diverse single-atom catalysts is not straightforward. Herein, a general strategy for synthesis of single-atom metals implanted in N-doped carbon (M 1 -N-C; M=Fe, Co, Ni and Cu) has been developed starting from multivariate metal–organic frameworks (MOFs). The M 1 -N-C catalysts, featuring identical chemical environments and supports, provided an ideal platform for differentiating the activity of single-atom metal species. When employed in electrocatalytic CO 2 reduction, Ni 1 -N-C exhibited a very high CO Faradaic efficiency (FE) up to 96.8 % that far surpassed Fe 1 -, Co 1 - and Cu 1 -N-C. Remarkably, the best-performer, Ni1-N-C, even demonstrated excellent CO FE at low CO 2 pressures, thereby representing a promising opportunity for the direct use of dilute CO 2 feedstock.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Zeolite-Stabilized Di- and Tetranuclear Molybdenum Sulfide Clusters Form Stable Catalytic Hydrogenation Sites

Supercages of faujasite (FAU)-type zeolites serve as a robust scaffold for stabilizing dinuclear (Mo 2 S 4 ) and tetranuclear (Mo 4 S 4 ) molybdenum sulfide clusters. The FAU-encaged Mo 4 S 4 clusters have a distorted cubane structure similar to the FeMo-cofactor in nitrogenase. Both clusters possess one unpaired electron per Mo atom. Additionally, they show identical catalytic activity per sulfide cluster. Their catalytic activity is stable (> 150 h) for ethene hydrogenation, while layered MoS 2 structures deactivate significantly under the same reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CaMn 3 IV O 4 Cubane Models of the Oxygen‐Evolving Complex: Spin Ground States S <9/2 and the Effect of Oxo Protonation

Abstract We report the single crystal XRD and MicroED structure, magnetic susceptibility, and EPR data of a series of CaMn 3 IV O 4 and YMn 3 IV O 4 complexes as structural and spectroscopic models of the cuboidal subunit of the oxygen‐evolving complex (OEC). The effect of changes in heterometal identity, cluster geometry, and bridging oxo protonation on the spin‐state structure was investigated. In contrast to previous computational models, we show that the spin ground state of CaMn 3 IV O 4 complexes and variants with protonated oxo moieties need not be S =9/2. Desymmetrization of the pseudo ‐ C 3 ‐symmetric Ca(Y)Mn 3 IV O 4 core leads to a lower S =5/2 spin ground state. The magnitude of the magnetic exchange coupling is attenuated upon oxo protonation, and an S =3/2 spin ground state is observed in CaMn 3 IV O 3 (OH). Our studies complement the observation that the interconversion between the low‐spin and high‐spin forms of the S 2 state is pH‐dependent, suggesting that the (de)protonation of bridging or terminal oxygen atoms in the OEC may be connected to spin‐state changes.

Lee, Heui Beom↗
DOE OSTI2021

Enhanced Selectivity and Stability of Finned Ferrierite Catalysts in Butene Isomerization

Designing zeolite catalysts with improved mass transport properties is crucial for restrictive networks of either one- or two-dimensional pore topologies. In this paper we demonstrate the synthesis of finned ferrierite (FER), a commercial zeolite with two-dimensional pores, where protrusions on crystal surfaces behave as pseudo nanoparticles. Catalytic tests of 1-butene isomerization reveal a 3-fold enhancement of catalyst lifetime and an increase of 12 % selectivity to isobutene for finned samples compared to corresponding seeds. Electron tomography was used to confirm the identical crystallographic registry of fins and seeds. Time-resolved titration of Brønsted acid sites confirmed the improved mass transport properties of finned ferrierite compared to conventional analogues. These findings highlight the advantages of introducing fins through facile and tunable post-synthesis modification to impart material properties that are otherwise unattainable by conventional synthesis methods.

2D zeolite↗
DOE OSTI2023

Insights into the Oxidative Degradation Mechanism of Solid Amine Sorbents for CO 2 Capture from Air: Roles of Atmospheric Water

Direct air capture (DAC) processes for extraction of CO 2 from ambient air are unique among chemical processes in that they operate outdoors with minimal feed pretreatments. Here, the impact of humidity on the oxidative degradation of a prototypical solid supported amine sorbent, poly(ethylenimine) (PEI) supported on Al 2 O 3 , is explored in detail. By combining CO 2 adsorption measurements, oxidative degradation rates, elemental analyses, solid-state NMR and in situ IR spectroscopic analysis in conjunction with 18 O labeling of water, a comprehensive picture of sorbent oxidation is achieved under accelerated conditions. Here we demonstrated that the presence of water vapor can play an important role in accelerating the degradation reactions. From the study we inferred the identity and kinetics of formation of the major oxidative products, and the role(s) of humidity. Our data are consistent with a radical mediated autooxidative degradation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Direct Insertion Polymerization of Ionic Monomers: Rapid Production of Anion Exchange Membranes

The limited number of methods to directly polymerize ionic monomers currently hinders rapid diversification and production of ionic polymeric materials, namely anion exchange membranes (AEMs) which are essential components in emerging alkaline fuel cell and electrolyzer technologies. Herein, we report a direct coordination-insertion polymerization of cationic monomers, providing the first direct synthesis of aliphatic polymers with high ion incorporations and allowing facile access to a broad range of materials. We demonstrate the utility of this method by rapidly generating a library of solution processable ionic polymers for use as AEMs. We investigate these materials to study the influence of cation identity on hydroxide conductivity and stability. Furthermore, we found that AEMs with piperidinium cations exhibited the highest performance, with high alkaline stability, hydroxide conductivity of 87 mS cm –1 at 80 °C, and a peak power density of 730 mW cm –2 when integrated into a fuel cell device.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Vapor-phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti-incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady-state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring-opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti-MFI at steady-state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring-opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chelator‐Assisted Precipitation‐Based Separation of the Rare Earth Elements Neodymium and Dysprosium from Aqueous Solutions

The rare earth elements (REEs) are critical resources for many clean energy technologies, but are difficult to obtain in their elementally pure forms because of their nearly identical chemical properties. Here, an analogue of macropa, G-macropa, was synthesized and employed for an aqueous precipitation-based separation of Nd 3+ and Dy 3+ . G-macropa maintains the same thermodynamic preference for the large REEs as macropa, but shows smaller thermodynamic stability constants. Molecular dynamics studies demonstrate that the binding affinity differences of these chelators for Nd 3+ and Dy 3+ is a consequence of the presence or absence of an inner-sphere water molecule, which alters the donor strength of the macrocyclic ethers. Leveraging the small REE affinity of G-macropa, we demonstrate that within aqueous solutions of Nd 3+ , Dy 3+ , and G-macropa, the addition of HCO 3 − selectively precipitates Dy 2 (CO 3 ) 3 , leaving the Nd 3+ −G-macropa complex in solution. With this method, remarkably high separation factors of 841 and 741 are achieved for 50 : 50 and 75 : 25 mixtures. Further studies involving Nd 3+ :Dy 3+ ratios of 95 : 5 in authentic magnet waste also afford an efficient separation as well. Finally, G-macropa is recovered via crystallization with HCl and used for subsequent extractions, demonstrating its good recyclability.

Gao, Yangyang↗
DOE OSTI2025

Blocky Selective Postpolymerization C–H Functionalization of Polyolefins

C–H functionalization of commodity polyolefins affords functional materials derived from a high-volume, low-cost resource. However, current postpolymerization modification strategies result in randomly distributed functionalization along the length of the polymer backbone, which has a negative impact on the crystallinity of the resultant polymers, and thus the thermomechanical properties. Here, we demonstrate an amidyl radical mediated C–H functionalization of polyolefins to access blocky microstructures, which exhibit a higher crystalline fraction, larger crystallite size, and improved mechanical properties compared to their randomly functionalized analogues. Taking inspiration from the site-selective C–H functionalization of small molecules, we leverage the steric protection provided by crystallites and target polymer functionalization to amorphous domains in a semicrystalline polyolefin gel. The beneficial outcomes of blocky functionalization are independent of the identity of the pendant functional group that is installed through functionalization. Here, the decoupling of functional group incorporation and crystallinity highlights the promise in accessing nonrandom microstructures through selective functionalization to circumvent traditional tradeoffs in postpolymerization modification, with potential impact in advanced materials and upcycling plastic waste.

Neidhart, Eliza K. [The University of North Caroli↗
DOE OSTI2025

De Novo Design of High‐Affinity Miniprotein Binders Targeting Francisella Tularensis Virulence Factor

Abstract Francisella tularensis poses considerable public health risk due to its high infectivity and potential for bioterrorism. Francisella‐like lipoprotein (Flpp3), a key virulence factor unique to Francisella, plays critical roles in infection and immune evasion, making it a promising target for therapeutic development. However, the lack of well‐defined binding pockets and structural information on native interactions has hindered structure‐guided ligand discovery against Flpp3. Here, we used a combination of physics‐based and deep‐learning methods to design high‐affinity miniprotein binders targeting two distinct sites on Flpp3. We identified four binders for site I with binding affinities ranging between 24–110 nM. For the second site, an initial binder showed a dissociation constant ( K D ) of 81 nM, and subsequent site saturation mutagenesis yielded variants with sub‐nanomolar affinities. Circular dichroism confirmed the topology of designed miniproteins. The X‐ray crystal structure of Flpp3 in complex with a site I binder is nearly identical to the design model (Cα root‐mean‐square deviation (RMSD): 0.9 Å). These designed miniproteins provide research tools to explore the roles of Flpp3 in tularemia and should enable the development of new therapeutic candidates.

Gokce‐Alpkilic, Gizem [Molecular Engineering and S↗
DOE OSTI2026

Tuning the Mechanical Properties of Crosslinked Copolymers via Sequence and Solvent‐Selective Swelling for Vat Photopolymerization

Block copolymers (BCPs) offer distinct advantages for vat photopolymerization by enabling mechanically programmable network structures through microphase-separated morphologies that can be kinetically trapped during curing, yielding properties unattainable in homogeneous resins. However, the respective roles of repeat-unit sequence and solvent environment, together with their interplay in directing network formation and mechanical performance, remain unclear. Here, we synthesize a series of CO 2 -based polycarbonate copolymers comprising a crosslinkable glassy poly(vinyl cyclohexene carbonate) (PVCHC, A block) and a non-crosslinkable soft poly(propylene carbonate) (PPC, B block). The polymer sequence is systematically varied (ABA, BAB, and statistical), and solvent choice controls block-selective swelling to jointly control gelation behavior, microphase morphology, and mechanical response through changes in the accessibility and local environment of photocrosslinkable vinyl groups during network formation, as revealed by photorheology and small angle x-ray scattering. By tuning polymer sequence and curing solvent, we transform nominally identical formulations from brittle to highly ductile materials, achieving a three-orders-of-magnitude range in toughness (0.003 to 9.1 MJ m −3 ). These results establish clear structure–processing–property relationships and identify polymer sequence and selective solvation as powerful strategies for programming both printability and performance of block copolymer resins for additive manufacturing.

additive manufacturing↗
DOE OSTI2022

Bio‐based glycerol plasticizers for flexible poly(vinyl chloride) blends

Abstract A series of glycerol‐based compounds were investigated for their application as plasticizers for flexible poly(vinyl chloride) (PVC) blends. The effect of plasticizer chemical structure on the performance, migration behavior, and blend morphology were evaluated and compared to blends produced using the commercial plasticizer dioctyl terephthalate (DOTP). Blends containing 40 phr (parts per hundred rubber) of glycerol‐based plasticizer showed a considerable reduction (between 54 to 86°C) in glass transition temperature ( T g ) relative to neat PVC ( T g ~ 80°C). Tensile testing of samples prepared with the glycerol analogs demonstrated higher ductility (elongation at break values of up to 97%) than DOTP (elongation at break value of 75%) at identical plasticizer loadings. The surface morphologies showed excellent incorporation of the glycerol plasticizers functionalized with alkyl chains longer than four carbons in length into the PVC matrix, whereas droplet formation was observed in blends with shorter chain glycerol derivatives. Leaching behavior of the plasticized samples were evaluated into different media and showed that plasticizers comprised of branched, or longer alkyl chains produced 2‐ to 4‐fold lower migration rates compared to those with shorter alkyl chains into polar solutions.

Halloran, Matthew W.↗
DOE OSTI2020

Neurosensory and Sinus Evolution as Tyrannosauroid Dinosaurs Developed Giant Size: Insight from the Endocranial Anatomy of Bistahieversor sealeyi

Tyrannosaurus rex and other tyrannosaurid dinosaurs were apex predators during the latest Cretaceous, which combined giant size and advanced neurosensory systems. Computed tomography (CT) data have shown that tyrannosaurids had a trademark system of a large brain, large olfactory bulbs, elongate cochlear ducts, and expansive endocranial sinuses surrounding the brain and sense organs. Older, smaller tyrannosauroid relatives of tyrannosaurids developed some, but not all, of these features, raising the hypothesis that tyrannosaurid-style brains evolved before the enlarged tyrannosaurid-style sinuses, which might have developed only with large body size. This has been difficult to test, however, because little is known about the brains and sinuses of the first large-bodied tyrannosauroids, which evolved prior to Tyrannosauridae. Here we present the first CT data for one of these species, Bistahieversor sealeyi from New Mexico. Bistahieversor had a nearly identical brain and sinus system as tyrannosaurids like Tyrannosaurus, including a large brain, large olfactory bulbs, reduced cerebral hemispheres, and optic lobes, a small tab-like flocculus, long and straight cochlear ducts, and voluminous sinuses that include a supraocciptal recess, subcondyar sinus, and an anterior tympanic recess that exits the braincase via a prootic fossa. When characters are plotted onto tyrannosauroid phylogeny, there is a two-stage sequence in which features of the tyrannosaurid-style brain evolved first (in smaller, nontyrannosaurid species like Timurlengia), followed by features of the tyrannosaurid-style sinuses (in the first large-bodied nontyrannosaurid tyrannosauroids like Bistahieversor). This suggests that the signature tyrannosaurid sinus system evolved in concert with large size, whereas the brain did not.

59 BASIC BIOLOGICAL SCIENCES↗