Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ice physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Amorphous and Crystalline H20 Ice at Rhea's Inktomi Crater

We present the analysis of Cassini spectral data from spectral mapping of Saturnian icy moons Dione and Rhea, to investigate possible effects of impact crater formation on the relative abundances of crystalline and amorphous water ice in the moons' ice crusts. Both moons display morphologically young ray craters as well as older craters. Possible changes in ice properties due to crater formation are conjectured to be more visible in younger craters, and as such Rhea's well imaged ray crater Inktomi is analysed, as are older craters for comparison. We used data from Cassini's Visual and Infrared Mapping Spectrometer (VIMS). For each pixel in the VIMS maps, spectral data were extracted in the near-infrared range (1.75 micrometers less than lambda less than 2.45 micrometers). Analysis was begun by fitting a single Gaussian to the peak in absorption at 2.0 micrometers, which was then subtracted from the data, leaving residuals with a minimum on either side of the original 2.0-micrometers band. The spectra of the individual spatial pixels were then clustered by the differences between these minima, which are sensitive to changes in both ice grain size and crystallinity. This yielded preliminary maps which approximated the physical characteristics of the landscape and were used to identify candidates for further analysis. Spectra were then clustered by the properties of the 1.5-micrometers band, to divide the map into regions based on inferred grain size. For each region, the predicted differences in minima from the Gaussian residuals, over a range of crystallinities, were calculated based on the found grain sizes. This model was used to find the crystallinity of each pixel via grain size and characteristics of the residual function. Preliminary results show a greater degree of crystallization of young crater interiors, particularly in Rhea's ray crater Inktomi, where ice showed crystalline ice abundances between 33 percent and 61 percent. These patterns in ice crystallization are possibly attributable to increased heat generated during crater formation.

Saturn Satellites↗

Present status of the icy conglomerate model

A brief history of the ice comglomerate model (ICM) of the nuclei of comets is presented. Emphasis is given to the usefulness if the ICM in describing cometary behavior despite its vagueness with respect to the chemical composition and physical structure of cometry nuclei. Alternative theories concerning the relationship between the chemical composition of cometary ices and comet behavior are briefly discussed.

Whipple, F. L.↗

Total Temperature Measurements Using a Rearward Facing Probe in Supercooled Liquid Droplet and Ice Crystal Clouds

Engine Icing Performance loss: rollback, surge, flameout, and even internal engine damagePartial melting and refreeze of ice inside engine core (Mason et al., 2006). Ingestion of ice crystals and aggregates, mixed-phase droplets, or supercooled liquid dropletsNeed to better understand the conditions and properties that lead to engine icing.Simulation and analysis (physical and computational, and modeling)Test facilities (PSL, NRC, ...). Thermal and computational models and analysisProbesMultiple probes (aerothermal probes and ice cloud characterization probes and techniques). Total temperatureTraditional total temperature probes (vented forward facing)Heated total temperature probes (Goodyear). Rearward facing (developmental). Total temperature relevance. Thermal interaction between the icing cloud and air flow impinging particles contribute to kinetic heating effect (Gent et al., 2000). Measurement considerations Temperature sensor accuracy. Incomplete recovery of total temperature. Thermal surfaces (sources and sinks). Flow effects (viscous losses). Debris contamination, including icing and ice ingestion.

Agui, Juan H.↗

New developments in satellite oceanography and current measurements

Principal satellite remote sensing techniques and instruments are described and attention is given to the application of such techniques to ocean current measurement. The use of radiometers, satellite tracking drifters, and altimeters for current measurement is examined. Consideration is also given to other applications of satellite remote sensing in physical oceanography, including measurements of surface wind stress, sea state, tides, ice, sea surface temperature, salinity, ocean color, and oceanic leveling.

Huang, N. E.↗

Ultraviolet spectroscopy of comets

Results of observations of comets in the ultraviolet are reviewed in relation to their significance for the chemistry and physics of the cometary coma and the composition of the cometary ice. Ultraviolet cometary observations began in 1970, when a hydrogen envelope was discovered extending millions of kilometers from the nucleus of comet Bennett, and continued with the discovery of oxygen and carbon in comet Kohoutek and the acquisition of comprehensive UV spectra from comets West (1976 VI), Seargent (1978 XV) and Bradfield (1979 X). The available cometary spectra are remarkably similar, indicative of a common composition and origin for comets and the insignificance of chemical reactions in the inner coma to species abundances. Ultraviolet spectroscopy has also allowed the determination of gas production rates from either the surface brightness or the total luminosity in a given spectral line. IUE observations of comet Bradfield reveal the water production rate to vary as the -3.7 power of heliocentric distance from 0.71 to 1.55 AU, incompatible with solar energy input as the controlling influence on water vaporization.

Feldman, P. D.↗

Comets and their composition

Recent theoretical and observational studies of comets are reviewed, with an emphasis on in situ data from spacecraft encounters with P/Giacobini-Zinner (September 1985) and P/Halley (March 1986). Topics addressed include clues on the origin and permanence of the Oort cometary cloud, observations of cometary nuclei far from the sun, the Halley nucleus, compositional and physical data from comae studies, and the parent molecules in comet ices. Also discussed are quantitative analyses of coma production; special features in the tail of P/Giacobini-Zinner; and proposals for (1) observations to detect distant giant comets, (2) high-resolution spectroscopic studies of comae, and (3) additional spacecraft missions such as the NASA Comet Rendezvous and Asteroid Flyby.

Spinrad, Hyron↗

Comets after Hyakutake and Hale-Bopp

Being icy, cometary nuclei are the most easily modified bodies in the solar system - even modest heating is sufficient to induce significant weight loss. This sublimative loss and longterm storage far from the sun protect the nucleus against internal warming and ensure that cometary nuclei today contain the least processed material remaining from the early nebula - or perhaps from the natal cloud. The chemical compositions of ices, low temperature-refractory organics, and refractory minerals (and their physical states) provide sensitive probes of the origin and history of this material. The fortunate appearance of Hyakutake and Hale-Bopp has provided a wealth of information on these Oort cloud comets, obtained with a wide range of astronomical approaches. I will review certain key results for these comets, such as chemical abundances, isotopic abundance ratios, nuclear spin statistics, and nuclear vs extended production of "parent volatiles", and will illustrate how these test the origins of cometary material. A comparison with 1P/Halley--a third comet from the giant planet nebular region--will be discussed in the context of heterogeneity among these bodies.

Mumma, Michael J.↗

Glacier and Ice Shelves Studies Using Satellite SAR Interferometry

Satellite radar interferometry is a powerful technique to measure the surface velocity and topography of glacier ice. On ice shelves, a quadruple difference technique separates tidal motion from the steady creep flow deformation of ice. The results provide a wealth of information about glacier grounding lines , mass fluxes, stability, elastic properties of ice, and tidal regime. The grounding line, which is where the glacier detaches from its bed and becomes afloat, is detected with a precision of a few tens of meters. Combining this information with satellite radar altimetry makes it possible to measure glacier discharge into the ocean and state of mass balance with greater precision than ever before, and in turn provide a significant revision of past estimates of mass balance of the Greenland and Antarctic Ice Sheets. Analysis of creep rates on floating ice permits an estimation of basal melting at the ice shelf underside. The results reveal that the action of ocean water in sub-ice-shelf cavities has been largely underestimated by oceanographic models and is the dominant mode of mass release to the ocean from an ice shelf. Precise mapping of grounding line positions also permits the detection of grounding line migration, which is a fine indicator of glacier change, independent of our knowledge of snow accumulation and ice melting. This technique has been successfully used to detect the rapid retreat of Pine Island Glacier, the largest ice stream in West Antarctica. Finally, tidal motion of ice shelves measured interferometrically provides a modern, synoptic view of the physical processes which govern the formation of tabular icebergs in the Antarctic.

Rignot, Eric↗

New Views of the Martian Polar Regions: The Latest Results from the Mars Odyssey THEMIS Investigation

One of the many questions of Martian exploration is to uncover the history of Mars, through analysis of the polar layered deposits (PLD). Martian polar ice caps hold most of the exposed water ice on the surface of Mars and yet their history and physical processes involved in their formation are unclear. In this work we present the latest imaging data acquired by the Mars Odyssey THermal EMission Imaging System (THEMIS) from the South Polar Residual Deposits (SPLD). We will concentrate our analysis on differences observed by THEMIS in winter/early spring and summer periods.

Ivanov, A. B.↗

Single-Scattering Properties of Melting Precipitation for GPM Passive Microwave and Radar Remote Sensing Applications

Over the past two decades, detailed computational simulations of the intricate three dimensional structures of ice-phase crystals and aggregates of those crystals have been developed. The microwave single-scattering properties of these simulated ice particles have been computed and used to improve quantitative estimates of snow rates and to better deRne the vertical structure of snow water contents in deep convective systems, as derived from satellite-borne passive microwave and/or radar remote sensing measurements. The same icephase particles have more recently been used as the starting point for simulations of melting precipitation using computational melting methods. In the current study, a heuristic melting method, as well as a physically-based melting procedure based on smoothed-particle hydrodynamics, are applied to ice particle models to describe the full evolution of the particles from dry snow to liquid drops. The discrete dipole approximation is utilized to calculate the single-scattering properties of the mixed-phase particles throughout the melting process. Then, the properties of the particles are “mapped” into simpliRed microphysical simulations of particle size spectra in the melting layers of stratiform, precipitating clouds. The bulk single-scattering properties of the melting layers and the sensitivity of their properties to modeling assumptions are explored, and the implications for combined radar-radiometer precipitation remote sensing from GPM are discussed.

William S Olson↗

Gyro Evaluation for the Mission to Jupiter

As an important component in NASA's New Frontiers Program, the Jupiter Polar Orbiter (Juno) mission is designed to investigate in-depth physical properties of Jupiter. It will include the giant planet's ice-rock core and atmospheric studies as well as exploration of its polar magnetosphere. It will also provide the opportunity to understand the origin of the Jovian magnetic field. Due to severe radiation environment of the Jovian system, this mission inherently presents a significant technical challenge to Attitude Control System (ACS) design since the ACS sensors must survive and function properly to reliably maneuver the spacecraft throughout the mission. Different gyro technologies and their critical performance characteristics are discussed, compared and evaluated to facilitate a choice of appropriate gyro-based inertial measurement unit to operate in a harsh Jovian environment to assure mission success.

physical properties↗

Neutron Spectrometer Prospecting During the Mojave Volatiles Project Analog Field Test

We know there are volatiles sequestered at the poles of the Moon. While we have evidence of water ice and a number of other compounds based on remote sensing, the detailed distribution, and physical and chemical form are largely unknown. Additional orbital studies of lunar polar volatiles may yield further insights, but the most important next step is to use landed assets to fully characterize the volatile composition and distribution at scales of tens to hundreds of meters. To achieve this range of scales, mobility is needed. Because of the proximity of the Moon, near real-time operation of the surface assets is possible, with an associated reduction in risk and cost. This concept of operations is very different from that of rovers on Mars, and new operational approaches are required to carry out such real-time robotic exploration. The Mojave Volatiles Project (MVP) is a Moon- Mars Analog Mission Activities (MMAMA) program effort aimed at (1) determining effective approaches to operating a real-time but short-duration lunar surface robotic mission, and (2) performing prospecting science in a natural setting, as a test of these approaches. We know there are volatiles sequestered at the poles of the Moon. While we have evidence of water ice and a number of other compounds based on remote sensing, the detailed distribution, and physical and chemical form are largely unknown. Additional orbital studies of lunar polar volatiles may yield further insights, but the most important next step is to use landed assets to fully characterize the volatile composition and distribution at scales of tens to hundreds of meters. To achieve this range of scales, mobility is needed. Because of the proximity of the Moon, near real-time operation of the surface assets is possible, with an associated reduction in risk and cost. This concept of operations is very different from that of rovers on Mars, and new operational approaches are required to carry out such robotic exploration. The Mojave Volatiles Project (MVP) is a Moon- Mars Analog Mission Activities (MMAMA) program effort aimed at (1) determining effective approaches to operating a real-time but short-duration lunar surface robotic mission, and (2) performing prospecting science in a natural setting, as a test of these approaches. Here we describe some results from the first such test, carried out in the Mojave Desert between 16 and 24 October, 2014. The test site was an alluvial fan just E of the Soda Mountains, SW of Baker, California. This site contains desert pavements, ranging from the late Pleistocene to early-Holocene in age. These pavements are undergoing dissection by the ongoing development of washes. A principal objective was to determine the hydration state of different types of desert pavement and bare ground features. The mobility element of the test was provided by the KREX-2 rover, designed and operated by the Intelligent Robotics Group at NASA Ames Research Center.

Moon- Mars Analog Mission Activities (MMAMA)↗

Antarctic sea ice concentrations inferred from Nimbus 5 ESMR and Landsat imagery

Landsat Multispectral Scanner near-infrared band images (MSS-7) are used to calculate Antarctic ice concentration values and these results are quantitatively compared to those derived from Nimbus 5 electrically scanning microwave radiometer (ESMR) brightness temperature data. The set of images includes regions near the ice edge and near the continental boundary during late winter or spring. The percentage of ice cover is derived from the microwave data, using an algorithm that incorporates the brightness temperature emissivity and interpolated climatological physical temperatures and that is not dependent on spatial resolution. Cloud-free Landsat images are used to provide an alternative determination of large-scale ice concentrations, but this method is limited in its ability to resolve individual ice flows, especially near the ice edge. A proportional classification procedure is applied to Landsat data based on observed reflection and the results are correlated with similarly-derived ESMR ice concentration values. The corresponding ice concentration values are found to agree to + or - 15%, with the largest uncertainties occurring in regions of low ice concentration.

Comiso, J. C.↗

Genesis of Pre-Hurricane Felix (2007): Warm Core Formation, Precipitation Evolution, and Predictability - Part 2

This is the second of a two-part study examining the simulated formation of Atlantic Hurricane Felix (2007) in a cloud-representing framework. Here several open issues are addressed concerning the formation of the storm's warm core, the evolution and respective contribution of stratiform versus convective precipitation within the parent wave's pouch, and the sensitivity of the development pathway reported in Part I to different model physics options and initial conditions. All but one of the experiments include ice microphysics as represented by one of several parameterizations, and the partition of convective versus stratiform precipitation is accomplished using a standard numerical technique based on the high-resolution control experiment. The transition to a warm-core tropical cyclone from an initially cold-core, lower tropospheric wave disturbance is analyzed first. As part of this transformation process, it is shown that deep moist convection is sustained near the pouch center. Both convective and stratiform precipitation rates increase with time. While stratiform precipitation occupies a larger area even at the tropical storm stage, deep moist convection makes a comparable contribution to the total rain rate at the pregenesis stage, and a larger contribution than stratiform processes at the storm stage. The convergence profile averaged near the pouch center is found to become dominantly convective with increasing deep moist convective activity there. Low-level convergence forced by interior diabatic heating plays a key role in forming and intensifying the near-surface closed circulation, while the midlevel convergence associated with stratiform precipitation helps to increase the midlevel circulation and thereby contributes to the formation and upward extension of a tropospheric-deep cyclonic vortex. Sensitivity tests with different model physics options and initial conditions demonstrate a similar pregenesis evolution. These tests suggest that the genesis location of a tropical storm is largely controlled by the parent wave's critical layer, whereas the genesis time and intensity of the protovortex depend on the details of the mesoscale organization, which is less predictable. Some implications of the findings are discussed.

Wang, zhuo↗

Integration of the Total Lightning Jump Algorithm into Current Operational Warning Environment Conceptual Models

Key points this analysis will address: 1) What physically is going on in the cloud when there is a jump in lightning? -- Updraft variations, Ice fluxes 2) How do these processes fit in with severe storm conceptual models? 3) What would this information provide an end user? --Relate LJA to radar observations, like changes in reflectivity, MESH, VIL, etc. based multi -Doppler derived physical relationships

Schultz, Chris↗

A Real-Time Satellite-Based Icing Detection System

Aircraft icing is one of the most dangerous weather conditions for general aviation. Currently, model forecasts and pilot reports (PIREPS) constitute much of the database available to pilots for assessing the icing conditions in a particular area. Such data are often uncertain or sparsely available. Improvements in the temporal and areal coverage of icing diagnoses and prognoses would mark a substantial enhancement of aircraft safety in regions susceptible to heavy supercooled liquid water clouds. The use of 3.9 microns data from meteorological satellite imagers for diagnosing icing conditions has long been recognized (e.g., Ellrod and Nelson, 1996) but to date, no explicit physically based methods have been implemented. Recent advances in cloud detection and cloud property retrievals using operational satellite imagery open the door for real-time objective applications of those satellite datasets for a variety of weather phenomena. Because aircraft icing is related to cloud macro- and microphysical properties (e.g., Cober et al. 1995), it is logical that the cloud properties from satellite data would be useful for diagnosing icing conditions. This paper describes the a prototype realtime system for detecting aircraft icing from space.

Minnis, Patrick↗

Self-assembling amphiphilic molecules: Synthesis in simulated interstellar/precometary ices

Interstellar gas and dust constitute the primary material from which the solar system formed. Near the end of the hot early phase of star and planet formation, volatile, less refractory materials were transported into the inner solar system as comets and interplanetary dust particles. Once the inner planets had sufficiently cooled, late accretionary infall seeded them with complex organic compounds [Oro, J. (1961) Nature (London) 190, 389-390; Delsemme, A. H. (1984) Origins Life 14, 51-60; Anders, E. (1989) Nature (London) 342, 255-257; Chyba, C. F. & Sagan, C. (1992) Nature (London) 355, 125-131]. Delivery of such extraterrestrial compounds may have contributed to the organic inventory necessary for the origin of life. Interstellar ices, the building blocks of comets, tie up a large fraction of the biogenic elements available in molecular clouds. In our efforts to understand their synthesis, chemical composition, and physical properties, we report here that a complex mixture of molecules is produced by UV photolysis of realistic, interstellar ice analogs, and that some of the components have properties relevant to the origin of life, including the ability to self-assemble into vesicular structures.

Meteoroids↗

Applying state diagrams to food processing and development

The physical state of food components affects their properties during processing, storage, and consumption. Removal of water by evaporation or by freezing often results in formation of an amorphous state (Parks et al., 1928; Troy and Sharp, 1930; Kauzmann, 1948; Bushill et al., 1965; White and Cakebread, 1966; Slade and Levine, 1991). Amorphous foods are also produced from carbohydrate melts by rapid cooling after extrusion or in the manufacturing of hard sugar candies and coatings (Herrington and Branfield, 1984). Formation of the amorphous state and its relation to equilibrium conditions are shown in Fig. 1 [see text]. The most important change, characteristic of the amorphous state, is noticed at the glass transition temperature (Tg), which involves transition from a solid "glassy" to a liquid-like "rubbery" state. The main consequence of glass transition is an increase of molecular mobility and free volume above Tg, which may result in physical and physico-chemical deteriorative changes (White and Cakebread, 1966; Slade and Levine, 1991). We have conducted studies on phase transitions of amorphous food materials and related Tg to composition, viscosity, stickiness, collapse, recrystallization, and ice formation. We have also proposed that some diffusion-limited deteriorative reactions are controlled by the physical state in the vicinity of Tg (Roos and Karel, 1990, 1991a, b, c). The results are summarized in this article, with state diagrams based on experimental and calculated data to characterize the relevant water content, temperature, and time-dependent phenomena of amorphous food components.

Non-NASA Center↗