Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hollow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

High voltage pulse ignition of mercury discharge hollow cathodes

A high voltage pulse generated by a capacitor discharge into a step-up transformer has been demonstrated capable of consistently igniting hollow cathode mercury discharges at propellant flows and heater power levels much below those required by conventional cathode starting. Results are presented for 3.2-mm diameter enclosed and open keeper cathodes. Starting characteristics are shown to depend on keeper voltage, mercury flow rate, heater power, keeper orifice size, emissive materials, and electrode to which the pulse is applied. This starting technique has been used to start a cathode over 10,000 times without any degradation of starting capability. The starting reliability, propellant and power savings offered by the high voltage pulse start should favorably impact performance of electron bombardment thrusters in missions requiring many on-off duty cycles.

Wintucky, E. G.↗
NASA NTRS1974

Hollow-cylinder waveguide isolators for use at millimeter wavelengths

A semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially is considered in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode matching analysis are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94GHz and 75 K.

Kanda, M.↗
NASA NTRS1975

Operating characteristics of a hollow-cathode neutralizer for 5 and 8 centimeter-diameter electron bombardment mercury ion thrusters

Thin-tip 0.3-cm-outside-diameter hollow-cathode neutralizers were used to investigate causes of neutralizer tip erosion experienced in thruster endurance tests. Bell-jar tests indicated that neutralizers with new rolled tantalum foil inserts coated with an emissive mixture eroded very little over the neutral flow rates investigated (3 to 10 mA) for simulated 5- and 8-cm-diameter thruster neutralizer conditions. Tip erosion rates of neutralizers operated with no insert or emissive mixture increased by two orders of magnitude for both configurations as the neutral flow rate decreased. Spectroscopic analysis of the discharge plasma from neutralizers operated with inserts coated with the emissive mixture detected tungsten at all neutral flow rates for both thruster neutralizer conditions. The only source of tungsten was the tip. Therefore, detection of tungsten indicated neutralizer tip erosion. Barium, an element of the emissive mixture, was detected at low neutral flow rates for the 5-cm-diameter thruster neutralizer operating condition only.

Weigand, A. J.↗
NASA NTRS1974

Hollow-cylinder waveguide isolators for use at millimeter wavelengths

The device considered in this study is a semiconductor waveguide isolator consisting of a hollow column of a semiconductor mounted coaxially in a circular waveguide in a longitudinal dc magnetic field. An elementary and physical analysis based on the excitation of plane waves in the guide and a more rigorous mode-matching analysis (MMA) are presented. These theoretical predictions are compared with experimental results for an InSb isolator at 94 GHz and 75 K.

Kanda, M.↗
NASA NTRS1975

A generalized expression for lag-time in the gas-phase permeation of hollow tubes

A generalized expression for the nonsteady-state parameter, lag-time, has been obtained from Fick's second law for gas-phase transport through hollow, cylindrical membranes. This generalized expression is simplified for three limiting cases of practical interest: (1) diffusion controlled transport, (2) phase boundary reaction control at the inlet surface, and (3) phase boundary reaction control at the outlet surface. In all three cases the lag-time expressions were found to be inversely proportional only to the diffusion coefficient and functionally dependent on the membrane radii. Finally, the lag-time expressions were applied to experimentally obtained lag-time data for alpha-phase titanium and alpha-phase iron.

Shah, K. K.↗
NASA NTRS1975

Hollow cathode characteristics in high current discharges

Current and potential distributions have been measured in various large hollow cathodes for currents from 0.9 to 7 kA and mass flows from 0.001 to 16 g/sec. For a variety of cavity diameters and shapes, all operated at 7 kA and 4 g/sec, the cathode current attaches over 0.6 cm of the cavity near the open end, where the electric field is less than 10 V/cm. However, for a fixed cathode configuration, the current conduction pattern is sensitive to both the current and the mass flows. For a given current, a range of mass flows is determined for maximum current penetration into the cavity, with the extent of penetration increasing as current decreases. Spectroscopic and photographic studies of AII radiance and electron densities within the cavity indicate a corresponding distribution of highly conducting plasma.

Krishnan, M.↗
NASA NTRS1974

Hollow cathode physics

Hollow cathode configurations with cavity diameters up to 2 cm have been operated in quasi-steady MPD discharges at tens of kA and argon massflows up to 16 g per sec. Internal probe measurements exhibit densities of current attachment of 1.5 kA per sq cm in a 1 cm wide zone at the end of the cavity coincident with low electric fields of less than 10 V per cm. This zone is further characterized by a sheath of bright AII and continuum radiance which is absent at low massflows. Electron densities exceed 10 to the 17th power per cu cm, indicating a conductivity of 10,000 mhos per m at the cavity exit for an electron temperature of only a few eV.

Von Jaskowsky, W. F.↗
NASA NTRS1975

Progress in the development of the hollow fiber sodium-sulfur secondary cell

This report describes the development and status of the sodium-sulfur secondary cell which uses fine hollow glass fibers as the electrolyte. Laboratory size cells containing up to 7000 fibers and having capacities up to 5 ampere-hours have been built and operated. These cells have been run at various cycle depths up to 95% of capacity. Lifetime does not depend on depth of discharge up to at least 50% depth and possibly deeper. Rates of charge and discharge of the nominally one hour cells have been varied from three times the design rate to 0.05 times the design rate. Smaller cells operate with essentially no internal resistance increase during their lifetimes of over four months on continuous charge/discharge at the one hour rate. Larger cells assembled with somewhat different mechanical assembly techniques have shorter lives. Two types of failure modes are observed: progressive weakening and breaking of the fibers inside the cell assembly, and fiber breakage at the fiber/tube sheet interface.

Levine, C. A.↗
NASA NTRS1975

Hot ion plasma production in HIP-1 using water-cooled hollow cathodes

A steady-state ExB plasma was formed by applying a strong radially inward dc electric field near the mirror throats. Most of the results were for hydrogen, but deuterium and helium plasmas were also studied. Three water-cooled hollow cathodes were operated in the hot-ion plasma mode with the following results: (1) thermally emitting cathodes were not required to achieve the hot-ion mode; (2) steady-state operation (several minutes) was attained; (3) input powers greater than 40 kW were achieved; (4) cathode outside diameters were increased from 1.2 cm (uncooled) to 4.4 cm (water-cooled); (5) steady-state hydrogen plasma with ion temperatures from 185 to 770 eV and electron temperatures from 5 to 21 eV were produced. Scaling relations were empirically obtained for discharge current, ion temperature, electron temperature, and relative ion density as a function of hydrogen gas feed rate, magnetic field, and cathode voltage. Neutrons were produced from deuterium plasma, but it was not established whether thay came from the plasma volume or from the electrode surfaces.

Reinmann, J. J.↗
NASA NTRS1975

Hot ion plasma production in HIP-1 using water-cooled hollow cathodes

The paper reports on hot-ion plasma experiments conducted in a magnetic mirror facility. A steady-state E x B plasma was formed by applying a strong radially inward dc electric field near the mirror throats. Most of the results were for hydrogen, but deuterium and helium plasmas were also studied. Three water-cooled hollow cathodes were operated in the hot-ion plasma mode with the following results: (1) thermally emitting cathodes were not required to achieve the hot-ion mode; (2) steady-state operation (several minutes) was attained; (3) input powers greater than 40 kW were achieved; (4) cathode outside diameters were increased from 1.2 cm (uncooled) to 4.4 cm (water-cooled); (5) steady-state hydrogen plasmas with ion temperatures from 185 to 770 eV and electron temperatures from 5 to 21 eV were produced. Scaling relations were empirically obtained for discharge current, ion temperature, electron temperature, and relative ion density as a function of hydrogen gas feed rate, magnetic field, and cathode voltage.

Reinmann, J. J.↗
NASA NTRS1977

Hollow-fiber H2/O2 fuel cell

Dual-membrane hollow-fiber electrode increases reliability and lowers costs. Leakage of fuel or oxidizer through fiber does not result in failure; excess product water migrates into electrolyte where it is removed by evaporation or distillation; constant exposure of fiber to electrolyte eliminates problems of drying and consequent failure; reference electrode monitors current collectors and overall cell performance.

Ingham, J. D.↗
NASA NTRS1976

Physical processes in hollow cathodes

Detailed measurements of magnetic field and floating potential inside large hollow cathodes in a quasi-steady MPD arc facility reveal a cavity plasma that is concentrated near the orifice for most operating conditions. However, for certain combinations of current and mass flow, the peak surface current density penetrates into the cavity up to one diameter upstream of the orifice. These measured distributions are consistent with a conduction model which suggests that maximum current penetration, and the more efficient cathode emission which accompanies it, occurs when the dominant mean free path for electron energy exchange is comparable to the cavity diameter.

Krishnan, M.↗
NASA NTRS1976

Thermal energy storage using large hollow steel ingots

High temperature thermal energy storage (to 500 C = 930 F) using hollow steel ingots is investigated. Preliminary studies indicate that the system should be reliable, be characterized by low operation and maintenance costs, and be associated with low development risk. The estimated installed system energy unit storage cost is $13.50/kWh-t.

Turner, R. H.↗
NASA NTRS1978

In-flight Compressible Turbulent Boundary Layer Measurements on a Hollow Cylinder at a Mach Number of 3.0

Skin temperatures, shearing forces, surface static pressures, and boundary layer pitot pressures and total temperatures were measured on a hollow cylinder 3.04 meters long and 0.437 meter in diameter mounted beneath the fuselage of the YF-12A airplane. The data were obtained at a nominal free stream Mach number of 3.0 and at wall-to-recovery temperature ratios of 0.66 to 0.91. The free stream Reynolds number had a minimal value of 4.2 million per meter. Heat transfer coefficients and skin friction coefficients were derived from skin temperature time histories and shear force measurements, respectively. Boundary layer velocity profiles were derived from pitot pressure measurements, and a Reynolds analogy factor of 1.11 was obtained from the measured heat transfer and skin friction data. The skin friction coefficients predicted by the theory of van Driest were in excellent agreement with the measurements. Theoretical heat transfer coefficients, in the form of Stanton numbers calculated by using a modified Reynolds analogy between skin friction and heat transfer, were compared with measured values. The measured velocity profiles were compared to Coles' incompressible law-of-the-wall profile.

Quinn, R. D.↗
NASA NTRS1978

An investigation of mercury hollow cathode phenomena

An experimental investigation is described in which measurements were made of plasma properties and other physical parameters upstream and downstream of the orifice plate of an operating mercury hollow cathode. These measurements included plasma property profiles, internal surface temperatures, internal pressure, and spectroscopic data of the external discharge. The results show the plume-to-spot mode transition to be characterized by significant changes in the plasma properties downstream of the cathode orifice, including the disappearance of an apparent electron free-fall region which is found to be present in the plume mode. The results also indicate the existence of a very dense plasma (10 to the 10th to 10 to the 14th electrons/cu cm) with steep electron density gradients in the region upstream of the orifice. The upstream data is found to correlate well with a modified form of the Saha equation. The related analysis indicates that the heavy particles approach thermal equilibrium with the electrons in the region of the orifice and that the ionization fraction in the orifice is very high - 80 to 100%.

Siegfried, D. E.↗
NASA NTRS1979

High current hollow cathode tube as a source of metastable atoms

A source for the continuous production of neutral metastable atoms is described. A hollow cathode discharge tube was used to produce densities of 3.5 times 10 to the 13th per cu cm and column densities of 1.6 times 10 to the 15th per sq cm in the 4s(2)2D metastable term of neutral copper. The accuracy of these density determinations (+ or - 30 to + or - 66%) is limited by the oscillator strengths required for the analysis. The usefulness of the source was demonstrated by measurements of relative oscillator strengths of some Cu I lines in the 2200 A wavelength region. These data are compared with those obtained by other methods.

Lombardi, G. G.↗
NASA NTRS1980

Baffle aperture design study of hollow cathode equipped ion thrusters

A simple theoretical model which can be used as an aid in the design of the baffle aperture region of a hollow cathode equipped ion thruster was developed. An analysis of the ion and electron currents in both the main and cathode discharge chambers is presented. From this analysis a model of current flow through the aperture, which is required as an input to the design model, was developed. This model was verified experimentally. The dominant force driving electrons through the aperture was the force due to the electrical potential gradient. The diffusion process was modeled according to the Bolm diffusion theory. A number of simplifications were made to limit the amount of detailed plasma information required as input to the model to facilitate the use of the model in thruster design. This simplified model gave remarkably consistant results with experimental results obtained with a given thruster geometry over substantial changes in operating conditions. The model was uncertain to about a factor of two for different thruster cathode region geometries. The design usefulness was limited by this factor of two uncertainty and by the accuracy to which the plasma parameters required as inputs to the model were specified.

Brophy, J. R., Jr.↗
NASA NTRS1979

Studies on an experimental quartz tube hollow cathode

An experimental study is described in which a quartz tube, hollow cathode was operated in a test fixture allowing the simultaneous measurement of internal cathode pressure, insert temperature profiles, and the emission currents from various cathode components as a function of discharge current and propellant (mercury) mass flow rate for a number of different cathode orifice diameters. Results show that the insert temperature profile is essentially independent of orifice diameter but depends strongly on internal cathode pressure and emission current. The product of internal cathode pressure and insert diameter is shown to be important in determining the emission location and the minimum keeper voltage.

Siegfried, D. E.↗