Controlled source electromagnetic data from Bell Creek, MT, USA
Time-lapse charged well casing controlled source electromagnetic data collected at the Bell Creek oil field in southeastern Montana between October 2017 and July 2019.
CO2 monitoring↗
SEARCH · Engineering Papers
Results for “geophysical data”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Seismic constraints from a Mars impact experiment using InSight and Perseverance
NASA’s InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) mission has operated a sophisticated suite of seismology and geophysics instruments on the surface of Mars since its arrival in 2018. On 18 February 2021, we attempted to detect the seismic and acoustic waves produced by the entry, descent and landing of the Perseverance rover using the sensors onboard the InSight lander. Similar observations have been made on Earth using data from both crewed and uncrewed spacecraft, and on the Moon during the Apollo era, but never before on Mars or another planet. This was the only seismic event to occur on Mars since InSight began operations that had an a priori known and independently constrained timing and location. It therefore had the potential to be used as a calibration for other marsquakes recorded by InSight. Here we report that no signal from Perseverance’s entry, descent and landing is identifiable in the InSight data. Nonetheless, measurements made during the landing window enable us to place constraints on the distance–amplitude relationships used to predict the amplitude of seismic waves produced by planetary impacts and place in situ constraints on Martian impact seismic efficiency (the fraction of the impactor kinetic energy converted into seismic energy).
79 ASTRONOMY AND ASTROPHYSICS↗
Physics informed neural network can retrieve rate and state friction parameters from acoustic monitoring of laboratory stick-slip experiments
Various machine learning (ML) and deep learning (DL) techniques have been recently applied to the forecasting of laboratory earthquakes from friction experiments. The magnitude and timing of shear failures in stick-slip cycles are predicted using features extracted from the recorded ultrasonic or acoustic emission (AE) signals. In addition, the Rate and State Friction (RSF) constitutive laws are extensively used to model the frictional behavior of faults. In this work, we use data from shear experiments coupled with passive acoustic (variance, kurtosis, and AE rate) interleaved with active source ultrasonic monitoring (transmitted wave amplitude) to develop physics-informed neural network (PINN) models incorporating the RSF law and AE rate generation equation with wave amplitude serving as a proxy for friction state variable. This PINN framework allows learning RSF parameters from stick-slip experiments rather than measuring them through a series of velocity step experiments. We observe that when the stick-slip cycles are irregular, the PINN models outperform the data-driven DL models. Transfer learning (TL) PINN models are also developed by pre-training on data collected at one normal stress level followed by forecasting shear failures and retrieving RSF parameters at other stress levels (i.e., with different recurrence intervals) after retraining on a limited amount of new data. Our findings suggest that TL models perform better compared to standalone models. Both standalone and TL PINN-estimated RSF parameters and their ground truth values show excellent agreements thus demonstrating that RSF parameters can be retrieved from laboratory stick-slip experiments using the corresponding acoustic data and that the transmitted wave amplitude provides a good representation of the evolving frictional state during stick-slips.
58 GEOSCIENCES↗
Explosive Yield Estimation Using Regional Seismic Moment Tensors
Here, we use the Pasyanos and Chiang (2022) data set to calculate the seismic moment M 0 for each explosion and use the measured explosive yield W to validate the W~M 0 relationship in Denny and Johnson (1991; hereafter, DJ91). The M 0 is corrected by transforming to a potency tensor and applying more appropriate near-source geophysical parameter values in the moment estimate. The mean residual between observed and predicted yield is near zero; however, the standard deviation of the residuals results in an F-value (a 95% confidence factor) of about 5. We re-estimate the coefficients in the DJ91 model and find similar values and only a slight improvement in the F-value. Next, we embark on a similar model selection process as DJ91, allowing for non-cube-root yield scaling and other plausible near-source elastic moduli. As was found by DJ91, the yield dependence is not significantly different from unity, and a cube root assumption is valid. Therefore, we yield scale the seismic moment and test the significance of all plausible explanatory variables. Isotropic moment performs better in the response variable than total moment. The preference for isotropic moment could be due to its relationship to volume change, which would be more directly affected by explosive yield. Surprisingly, we find that the overburden pressure, which is a function of depth, is not a significant parameter in the model. We hypothesize that this is due to the competing depth effects on source asymmetry and the incorporation of depth in the Green’s functions used to calculate the seismic moment tensors. Importantly, this emphasizes that only seismic moment tensor-derived moments should be used in these models. After removing insignificant model parameters, we are left with a simple model to predict explosive yield $\widehat{W}$ in kt from isotropic moment M I in N·m, $\widehat{W}$=κ –1.4132 10 0.035626GP M I , in which κ and GP are the near-source bulk modulus and gas porosity in Pa and %, respectively. The F-value for this model is approximately 3.
58 GEOSCIENCES↗
Variable Daily Autocorrelation Functions of High-Frequency Seismic Data on Mars
Abstract High-frequency seismic data on Mars are dominated by wind-generated lander vibrations, which are radiated partially to the subsurface. Autocorrelation functions (ACFs) of seismic data on Mars filtered between 1 and 5 Hz show clear phases at ∼1.3, ∼2.6, and ∼3.9 s. Daily temporal changes of their arrival times (dt/t) correlate well with the daily changes of ground temperature, with ∼5% daily variation and ∼50 min apparent phase delay. The following two mechanisms could explain the observations: (1) the interference of two predominant spectral peaks at ∼3.3 and ∼4.1 Hz, assumed to be both lander resonance modes, generate the apparent arrivals in the ACFs; (2) the interference of the lander vibration and its reflection from an interface ∼200 m below the lander generate the 3.3 Hz spectral peak and ∼1.3 s arrival in the ACFs. The driving mechanism of the resolved dt/t that most likely explains the ∼50 min delay is thermoelastic strain at a near-surface layer, affecting the lander–ground coupling and subsurface structures. The two outlined mechanisms suggest, respectively, up to ∼10% changes in ground stiffness at 1–5 Hz and ∼15% velocity changes in the top ∼20 m layer. These are upper bound values considering also other possible contributions. The presented methodology and results contribute to analysis of ACFs with limited data and the understanding of subsurface materials on Mars.
Geochemistry & Geophysics↗
MLP-NN vs Gauss-Newton files
-Input files for randomly selected subset data (30 instances) from primary dipole-dipole forward modeling data.-Inversion results in surfer grid format as well as in .DAT format.-Scatterplots for MLP-NN vs Gauss-Newton present in the excel sheet.
58 GEOSCIENCES↗
Field Test Bed for Vadose-Zone Monitoring Approaches - 20404
In the Central Plateau at the U.S. Department of Energy Hanford Site, a large inventory of contaminants resides in unsaturated sediments within the approximately 100-meter-thick vadose zone, posing a potential continuing risk to groundwater. Vadose zone remedies used to address these contaminants will require performance monitoring to provide feedback during implementation and for long-term verification that remedial action objectives have been met. Passive approaches may also need long-term monitoring to demonstrate that the flux of contaminants from the vadose zone to the groundwater are below thresholds established to meet groundwater protection goals. Collection of physical (e.g., groundwater or sediment) samples is a common method for identifying contaminant concentration distributions, but this approach is limited by the number of locations and the frequency with which data can be collected. In situ vadose zone measurements have evolved over the past few years to include key measurements of water content, soil water pressure, temperature, and chemical concentration. However, the current generation of sensors is designed for relatively short-term use in near-surface soils or sediments. Geophysical methods have been evolving but are also limited in that they have not been designed for the specific long-term vadose zone monitoring needs at the Hanford Site. Overall, monitoring under unsaturated conditions can be difficult due to the need to install and maintain instrumentation over a large area and depth and the need to identify preferential flow pathways due to geologic and chemical heterogeneities over long periods. Thus, a vadose zone monitoring test bed was initiated to address these challenges and identify cost-effective approaches for implementation and postclosure monitoring of the deep vadose zone. The monitoring test bed is expected to provide valuable field-scale information for the design of vadose zone monitoring systems. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper
Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have monitored the three-dimensional displacements of a fluid-driven fracture during water injections in a borehole at ~1.5 km depth in the crystalline rock of the Sanford Underground Research Facility (USA). The fracture initiates at 61% of the minimum horizontal stress by micro-shearing of the borehole on a foliation plane. As the fluid pressure increases further, borehole axial and radial displacements increase with injection time highlighting the opening and sliding of a new hydrofracture growing ~10 m away from the borehole, in accordance with the ambient normal stress regime and in alignment with the microseismicity. Our study reveals how fluid-driven fracture stimulation can be facilitated by a mixed-mode process controlled by the complex hydromechanical evolution of the growing fracture. The data presented in this submission refer to the SIMFIP measurements and analyses of the stimulation tests conducted on the 164 ft (50 m) notch of the Sanford Underground Research Facility (SURF), during the EGS-Collab test 1. In addition to the datafiles, there is the draft of a manuscript submitted to Geophysical Research Letters (GRL).
15 GEOTHERMAL ENERGY↗
Interpretation of large‐scale, long‐term electrical geophysical monitoring guided by a process simulation
Abstract Surface electrical resistivity tomography (ERT) was used at a waste site to monitor vadose zone changes in electrical properties as a proxy for contaminant flux over a span of 17 years. The BC Cribs and Trenches (BCCT) site at the Hanford site contains 20 disposal trenches and six disposal cribs. Wastes include a large inventory of technetium‐99 and large masses of nitrate and uranium‐238. ERT data were collected along 41 profiles in 2005 to characterize regions of elevated bulk electrical conductivity (BEC) associated with past liquid waste discharges. Previous analyses performed on samples from four boreholes showed a high correlation between nitrate concentration and BEC. In 2022, ERT data were re‐collected along the same profiles and six additional profiles in an area not previously surveyed. Compared to background uncontaminated areas, BEC was higher in contaminated areas at the waste sites. Given the correlation between nitrate concentration and BEC previously found at this site, ERT images show the spatial distribution and relative ionic concentration of vadose zone contaminants at BCCT. Between 2005 and 2022, ERT difference images showed a decrease in BEC surrounding most waste sites, with exceptions where there were known anthropogenic surface changes. An evaluation of recharge‐driven nitrate migration using synthetic flow and transport simulations showed that downward migration causes a decrease in BEC from the decrease in ionic strength at the trailing end of the plume where contaminants migrated downward. From this, we interpret ERT difference images as showing the predominant regions of downward ion flux.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Geophysical Observations of the 2023 September 24 OSIRIS-REx Sample Return Capsule Reentry
Sample return capsules (SRCs) entering Earth's atmosphere at hypervelocity from interplanetary space are a valuable resource for studying meteor phenomena. The 2023 September 24 arrival of the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer SRC provided an unprecedented chance for geophysical observations of a well-characterized source with known parameters, including timing and trajectory. A collaborative effort involving researchers from 16 institutions executed a carefully planned geophysical observational campaign at strategically chosen locations, deploying over 400 ground-based sensors encompassing infrasound, seismic, distributed acoustic sensing, and Global Positioning System technologies. Additionally, balloons equipped with infrasound sensors were launched to capture signals at higher altitudes. This campaign (the largest of its kind so far) yielded a wealth of invaluable data anticipated to fuel scientific inquiry for years to come. The success of the observational campaign is evidenced by the near-universal detection of signals across instruments, both proximal and distal. This paper presents a comprehensive overview of the collective scientific effort, field deployment, and preliminary findings. The early findings have the potential to inform future space missions and terrestrial campaigns, contributing to our understanding of meteoroid interactions with planetary atmospheres. Furthermore, the data set collected during this campaign will improve entry and propagation models and augment the study of atmospheric dynamics and shock phenomena generated by meteoroids and similar sources.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Geophysical Impacts and Spectroscopic Identification of a Hydrous Iron Sulfate on Icy Worlds
Over geologic time-scales, large volumes of exogenic sulfur ions from Io's plasma torus have been supplied to the surface of Europa and Ganymede, which, combined with recent interpretations of orbiter images, dynamical modeling, and surface-subsurface exchange, suggests further sulfur transport into the interior of the icy worlds. These observations motivate mixed-phase spectral modeling for interpreting orbiter spectroscopy data and determination of hydration states of candidate surface materials including hydrous sulfates. In this work, we present a combined experimental and theoretical study of the low temperature and high pressure vibrational spectral signature of the iron-sulfate monohydrate endmember, szomolnokite (FeSO 4 ·H 2 O). By employing synchrotron Fourier-transform infrared spectroscopy (FTIR) in the diamond anvil cell up to 23 GPa and down to 20 K, we explore the extreme range of pressure-temperature domains relevant to icy environments throughout our solar system and beyond. Combined with our density-functional theory quantum-mechanics molecular dynamics results, we demonstrate that experimentally observed infrared features in the O-H stretching region commonly associated with nH 2 O (n > 1) hydration states can be attributed to a pure monohydrate without the need for pressure-induced exsolved ice, other coexisting hydrous iron sulfates, or strong overtone and combination modes. We further discuss the possibility of lateral variations in density and shear properties on icy worlds associated with temperature variations and the high-pressure phases of kieserite group monohydrated sulfates.
Geosciences↗
GMS Station SOH Monitoring Users Guide (V.1.2)
The Geophysical Monitoring System (GMS) State-of-Health User Interface (SOH UI) is a web-based application that allows a user to view and acknowledge the SOH status of stations in the GMS system. The SOH UI will primarily be used by the System Controller, who monitors and controls the system and external data connections. The System Controller uses the station SOH UIs to monitor, detect, and troubleshoot problems with station data availability and quality.
58 GEOSCIENCES↗
Carbon Storage Core Characterization Efforts at NETL
The multi-scale Computed Tomography (CT) and core flow facility in the Geocharacterization Laboratory at NETL, Morgantown yields porosity, permeability, and fracture properties of rock core samples obtained from the subsurface while maintaining the integrity of the sample. Additionally, geophysical bulk rock properties are analyzed with the laboratory’s GeoTEK multi-sensor core logger in a comparable fashion to downhole methods. NETL researchers collaborate with stakeholders within the carbon storage, oil and gas, and critical minerals sectors. Since 2017, over 1.88 miles of core have been analyzed within the laboratory and all data is publicly available through the Technical Report Series (TRS) on the Energy Data eXchange (EDX). Additionally, the website, RokBase, was curated to extrapolate and visualize the high-resolution data from field operations. The characterization of the Lively Grove #1 (LG#1) well provides a case study into the full capabilities of the Geocharacterization Laboratory. During the comprehensive study of LG#1 ~1-2 mm in diameter, vertical to bedding, cylindrical structures were identified throughout the St. Peter Formation. These structures are pervasive throughout the St. Peter Formation at depth and are characterized as the trace fossil, Skolithos.
Isom, Shelby L↗
Computed Tomography Scanning and Geophysical Measurements of the Caney Shale Formation from the Tomaney #1-35-34-27 Well
Evaluation of reservoir samples can support resource estimation and determination of effective extraction methodologies. While it is common for commercial entities to perform these characterizations, the resources necessary to conduct these analyses are not always available to the broader interest base, such as state agencies, universities, and research-based consortiums. To meet the growing need for comprehensive and high-quality lithologic data for collaborative research initiatives, the U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has used available resources in conjunction with previous techniques and new, innovative methodologies to develop a systematic approach for the evaluation of cores. This report focuses on the Tomaney #1-35-34-27 well. Tomaney #1-35-34-27 was drilled in southwestern Stephens County, Oklahoma within section 35, township 2S, and range 4W. The Tomaney #1-35-34-27 was drilled in January/February of 2020 and targeted the Devonian Woodford Shale Formation and cored the Mississippian Caney Shale formation within the Ardmore Basin.
04 OIL SHALES AND TAR SANDS↗
The Complicated Link Between Material Properties and Microfracture Density for an Underground Explosion in Granite
Geophysical techniques are often implemented as quick and inexpensive ways to locate and characterize fractures in the subsurface, which is important for a number of geoscience fields. Seismic velocities are the most widely used proxies for identification of fractures, but the correlation is not always well-defined. In this study we present material property data: unconfined compressive strength (UCS), bulk density (ρ), Young's modulus (E), Poisson's ratio (ν), P wave velocity (V p ), and S wave velocity (V s ), in conjunction with microfracture densities measured on samples of granite collected before and after underground chemical explosions. Results indicate the relationship between fractures and material properties is complex, even in this single-lithology environment. We interpret that this complexity arises from varying fracture mechanisms (e.g. dilation-inducing fractures vs compression-inducing fractures) in different parts of the core, due to differences in stress conditions. Additional complexity may result from chemical interactions between the fresh fractures and the fluids in the area. Water content appears to have a significant, if not dominant, role in the unconfined compressive strength (UCS) of the samples. We suggest caution when using elastic property measurements as a proxy for fracturing in areas of explosion-induced damage, or in other areas where a variety of mechanisms induce fracturing.
58 GEOSCIENCES↗
Hydrogen and Silicon Effects on Hexagonal Close Packed Fe Alloys at High Pressures: Implications for the Composition of Earth's Inner Core
Hexagonal close-packed (hcp) structured Fe-Ni alloy is believed to be the dominant phase in the Earth's inner core. This phase is expected to contain 4%–5% light elements, such as Si and H. While the effects of individual light element candidates on the equation of state (EoS) of the hcp Fe metal have been studied, their combined effects remain largely unexplored. Here, in this study, we report the equations of state for two hcp-structured Fe-Si-H alloys, namely Fe 0.83 Si 0.17 H 0.07 and Fe 0.83 Si 0.17 H 0.46 , using synchrotron X-ray diffraction measurements up to 125 GPa at 300 K. These alloys were synthesized by cold compression of Fe-9wt%Si in either pure H 2 or Ar-H 2 mixture medium in diamond-anvil cells. The volume increase caused by a H atom in hcp Fe-Si-H alloys is approximately eight times greater than that by a Si atom. We used the improved data set to develop a composition-dependent EoS that covers a wide range of compositions. Our calculated density and bulk sound velocity of hcp Fe-Si-H alloys suggest a large trade-off between Si and H contents in fitting the seismic properties of the inner core. Combining our new EoS with geophysical and geochemical constraints, we propose 1.6–3 wt% Si and 0.15–0.6 wt% H in the Earth's inner core.
58 GEOSCIENCES↗
Meta-modeling strategy for data-driven forecasting
Accurately forecasting the weather is a key requirement for climate change mitigation. Data-driven methods offer the ability to make more accurate forecasts, but lack interpretability and can be expensive to train and deploy if models are not carefully developed. Here, we make use of two historical climate data sets and tools from machine learning, to accurately predict temperature fields. Furthermore, we are able to use low fidelity models that are cheap to train and evaluate, to selectively avoid expensive high fidelity function evaluations, as well as uncover seasonal variations in predictive power. This allows for an adaptive training strategy for computationally efficient geophysical emulation.
Skinner, Dominic J↗
Introduction to the Special Section on Seismoacoustics and Seismoacoustic Data Fusion
This special section of the Bulletin of the Seismological Society of America provides a broad overview on recent advances to the understanding of the seismoacoustic wavefield through 19 articles. Leveraging multiphenomenology datasets is instrumental for the continued success of future planetary missions, nuclear test ban treaty verification, and natural hazard monitoring. Progress in our theoretical understanding of mechanical coupling, advancements in coupled-media wave modeling, and developments of efficient multitechnology inversion procedures are key to fully exploiting geophysical datasets on Earth and beyond. We begin by highlighting papers describing experimental setups and instrumentation, followed by characterization of natural and anthropogenic sources of interest, and ending in new open-access datasets. Finally, we conclude with an overview of challenges that remain as well as some potential directions for future investigation within the growing multidisciplinary field of seismoacoustics.
58 GEOSCIENCES↗