Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functional materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Quantitative analysis of the local phase transitions induced by the laser heating

Functional imaging enabled by scanning probe microscopy (SPM) allows investigations of nanoscale material properties under a wide range of external conditions, including temperature. However, a number of shortcomings preclude the use of the most common material heating techniques, thereby limiting precise temperature measurements. Here we discuss an approach to local laser heating on the micron scale and its applicability for SPM. We applied local heating coupled with piezoresponse force microscopy and confocal Raman spectroscopy for nanoscale investigations of a ferroelectric-paraelectric phase transition in the copper indium thiophosphate layered ferroelectric. Bayesian linear unmixing applied to experimental results allowed extraction of the Raman spectra of different material phases and enabled temperature calibration in the heated region. Lastly, the obtained results enable a systematic approach for studying temperature-dependent material functionalities in heretofore unavailable temperature regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Entropy-defect synergy for dual luminescence mechanism in spinel: Time-resolved anti-counterfeiting and fingerprint visualization

Multimodal luminescent materials, while promising for anti-counterfeiting, often lack dynamic time-dependent responses and controllable spatial distribution, limiting their encryption capabilities in the spatiotemporal dimension. Here, this work presents a coordinated control strategy based on entropy and defect engineering, and uses a backpropagation (BP) neural network for material screening to successfully prepare spinel Mg 0.8 (Fe 0.04 Co 0.04 Ni 0.04 Cu 0.04 Zn 0.04 )Cr 2 O 4 (MgA 5 CO) phosphors with time-dependent dynamic luminescence behavior. This phosphor simultaneously activated the d-d transition luminescence (∼618 nm) derived from Co 2+ /Cr 3+ and the defect luminescence (∼398 nm) related to zinc vacancies (V Zn ) in a single-phase solid solution. The phosphor exhibits a time-dependent color evolution from pink to purple under fixed-wavelength excitation, due to the different excited-state dynamics and decay lifetimes associated with the d-d transition and defect luminescence. Structural characterization and spectral analysis confirmed the existence of V Zn and its significant role in defect luminescence process. The fluorescent and dynamic luminescent properties of entropy-based spinel oxide enable its use in advanced anti-counterfeiting applications like fingerprint recognition and color-changing dedicated anti-counterfeiting mark, showing promise in high-end and time-dynamic anti-counterfeiting fields. This research not only developed a new type of fluorescent dynamic anti-counterfeiting material, but also provided a new idea for constructing advanced optical functional materials with multiple luminescence mechanisms.

Defect project↗
DOE OSTI2022

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

Here, with recent advances of additive manufacturing technology, direct ink write (DIW) printing has allowed to incorporate multi-material printing of various materials with freedom of design and complex geometric shapes to complete functional sensors in a one-step fabrication. This paper introduces the use of DIW 3D printing of polydimethylsiloxane (PDMS) with barium titanate (BTO) filler as stretchable composites with tunable piezoelectric properties that can be used for force sensors applications. To improve the bonding between stretchable piezoelectric composites and electrodes, multi-walled carbon nanotubes was included in the fabrication of electrodes at a fixed ratio of 11 wt. %. The alignment of the BTO dipoles was achieved through corona poling method, which applies an electric charge on the surface layer of the functional material, aligning the dipoles in the desired direction and thus gaining the piezoelectricity. Different BTO mixing ratios (10–50 wt. %) were evaluated in order to obtain tunable piezoelectric properties and compare the sensitivity with respect their elastic properties. Tensile testing and piezoelectric testing were carried out to characterize mechanical and piezoelectric properties. Results showed that fabricated PDMS with 50 wt. % BTO gave the highest piezoelectric coefficient (d 33 ) of 11.5 pC N -1 and with an output voltage of 385 mV under compression loading of >200 lbF. This demonstrates feasibility of using multi-material DIW printing to fabricate piezoelectric force sensors with integrated electrodes in one-step without compromising the flexibility of the material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure–Function Relationships in Sequence-Controlled Copolymers for Rare Earth Element Chelation

The ability to tune material function through primary sequence is a defining feature of biological macromolecules, allowing precise control over structure and target interactions in complex aqueous environments. However, translating sequence–structure–function relationships to synthetic macromolecules is challenging due to their dispersity in sequence, conformation, and composition. Here, we report systematic studies of amphiphilic polymer chelators designed to probe how composition and patterning influence binding affinity and selectivity for rare earth elements (REEs), a series of technologically relevant metals with challenging separation profiles. A library of copolymers varying hydrophobic monomer composition and patterning was synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization, spanning statistical, gradient, and block architectures. REE binding was quantified using a high-throughput colorimetric assay, and reconstruction of polymer ensembles using kinetic stochastic simulations enabled quantitative comparisons of sequence heterogeneity, linking local monomer colocalization to emergent REE binding. Further, we investigated the role of different hydrophobic comonomers in tuning metal coordination, with binding trends linked to structural features that influence binding site desolvation. Complementary dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) measurements showed that both polymer and monomer architecture modulate metal-induced conformational changes, and that multichain assembly behavior emerges beyond critical hydrophobic thresholds. Sequence control also altered REE selectivity, with nonmonotonic differences observed across compositionally identical polymers with different sequence architectures. Together, these findings establish design principles that connect polymer sequence and structure to binding performance, guiding the design of macromolecular chelators with enhanced affinity and selectivity for applications in separations, sensing, and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Size Dependence of a Temperature-Induced Solid-Solid Phase Transition in Copper(I) Sulfide

Determination of the phase diagrams for the nanocrystalline forms of materials is crucial for our understanding of nanostructures and the design of functional materials using nanoscale building blocks. The ability to study such transformations in nanomaterials with controlled shape offers further insight into transition mechanisms and the influence of particular facets. Here we present an investigation of the size-dependent, temperature-induced solid-solid phase transition in copper sulfide nanorods from low- to high-chalcocite. We find the transition temperature to be substantially reduced, with the high chalcocite phase appearing in the smallest nanocrystals at temperatures so low that they are typical of photovoltaic operation. Size dependence in phase trans- formations suggests the possibility of accessing morphologies that are not found in bulk solids at ambient conditions. These other- wise-inaccessible crystal phases could enable higher-performing materials in a range of applications, including sensing, switching, lighting, and photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2021

Orienting an Organic Semiconductor into DNA 3D Arrays by Covalent Bonds

We report a quasi-one-dimensional organic semiconductor, hepta(p-phenylene vinylene) (HPV), was incorporated into a DNA tensegrity triangle motif using a covalent strategy. 3D arrays were self-assembled from an HPV-DNA pseudo-rhombohedron edge by rational design and characterized by X-ray diffraction. Templated by the DNA motif, HPV molecules exist as single-molecule fluorescence emitters at the concentration of 8 mM within the crystal lattice. The anisotropic fluorescence emission from HPV-DNA crystals indicates HPV molecules are well aligned in the macroscopic 3D DNA lattices. Sophisticated nanodevices and functional materials constructed from DNA can be developed from this strategy by addressing functional components with molecular accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Cellular Automaton Simulation for Predicting Phase Evolution in Solid-State Reactions

New computational tools for solid-state synthesis recipe design are needed in order to accelerate the experimental realization of novel functional materials proposed by high-throughput materials discovery workflows. This work contributes a cellular automaton simulation framework for predicting the time-dependent evolution of intermediate and product phases during solid-state reactions as a function of precursor choice and amount, reaction atmosphere, and heating profile. The simulation captures the effects of reactant particle spatial distribution, particle melting, and reaction atmosphere. Reaction rates based on rudimentary kinetics are estimated using density functional theory data from the Materials Project and machine learning estimators for the melting point and the vibrational entropy component of the Gibbs free energy. The resulting simulation framework allows for the prediction of the likely outcome of a reaction recipe before any experiments are performed. We analyze five experimental solid-state recipes for BaTiO 3 , CaZrN 2 , and YMnO 3 found in the literature to illustrate the performance of the model in capturing reaction selectivity and reaction pathways as a function of temperature and precursor choice. This simulation framework offers an easier way to optimize existing recipes, aid in the identification of intermediates, and design effective recipes for yet unrealized inorganic solids in silico .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Using heterostructural alloying to tune the structure and properties of the thermoelectric Sn 1–x Ca x Se

We grow and kinetically stabilize the isotropic rocksalt phase of SnSe thin films by alloying SnSe with CaSe. Thin polycrystalline films of the metastable heterostructural alloy Sn 1–x Ca x Se are synthesized by pulsed laser deposition on amorphous SiO 2 over the entire composition range 0 < x < 1. We observe the theoretically-predicted, composition-driven change from a layered, orthorhombic structure to an isotropic, cubic structure near x = 0.18, in reasonable agreement with the theoretical value of x = 0.13 calculated from first principles. The optical band gap is highly non-linear in x and the trend agrees with theory predictions. Compared to the layered end-member SnSe, the isotropic alloy near the orthorhombic-to-rocksalt transition has a p-type electrical resistivity three orders of magnitude lower, and a thermoelectric power factor at least ten times larger. Furthermore manipulation of the structure of a functional material like SnSe via alloying may provide a new path to enhanced functionality, in this case, improved thermoelectric performance.

14 SOLAR ENERGY↗
DOE OSTI2020

Polymorphic Metastability in Colloidal Semiconductor Nanocrystals

Metastable polymorphs of inorganic solids often possess material properties not present in the corresponding thermodynamic polymorphs, making them targets for the development of new functional materials. In contrast with isolating metastable bulk materials, syntheses of metastable polymorphs on the nanoscale are aided by fast non-equilibrium reaction kinetics and the favorable thermodynamic influence of surface energies, giving rise to greater ease of access to metastable high-temperature polymorphs and, in some cases, new polymorphs that do not exist in the bulk. The syntheses of metastable semiconductor nanocrystals are of interest for their potentially unique optoelectronic and physicochemical properties. However, in many material systems, synthesizing nanocrystalline products away from thermodynamic equilibrium in a predictable manner remains an outstanding challenge. This review outlines direct synthetic methodologies that have been developed to enable control over the nucleation and growth of metastable polymorphs of semiconductor nanocrystals by tailoring reaction conditions, precursor kinetics, ligand and surface effects, and other synthetic levers. The case studies reviewed herein expound on the direct syntheses of metastable ZnSe, Cu 2 SnSe 3 , CuInSe 2 , Ag 2 Se, and AgInSe 2 nanocrystals, and although there remain numerous examples of metastable nanocrystal syntheses outside of these metal chalcogenide systems, the concepts discussed are of general utility to the field of metastable nanocrystal syntheses as a whole. Explicit examples in which new functional properties are afforded by metastable polymorphs of the aforementioned material systems are presented within the context of applications for solar cells, photonics, and optical sensing. Finally, the factors that affect the kinetic persistence of metastable nanocrystalline polymorphs are discussed at length for these material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Correlation of Charge Carrier Transport to Local Crystal Quality in Lead Halide Perovskites

Although solution processing methods provide an attractive route toward development of low-cost functional materials, these accessible fabrication approaches can engender high concentrations of microscopic structural defects that are detrimental to performance. In lead halide perovskites, structural disorder derived from solution processing has been implicated as an important determiner of photophysical properties. However, a direct correlation between the functional properties of these materials and the local crystal structure in which non-equilibrium states evolve has remained elusive, in part because structural heterogeneities occur on length scales that defy conventional characterization techniques. To address this knowledge gap, in this work we have combined ultrafast pump–probe microscopy and electron backscattering diffraction to directly correlate charge carrier transport with the local diffraction pattern contrast, an indicator of crystal quality. Spatial correlation of these measurements strongly suggests that even on individual single crystal CsPbBr3 domains, microscopic variability in the crystal quality profoundly impacts the efficiency of charge carrier transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mesoscopic theory of defect ordering–disordering transitions in thin oxide films

Abstract Ordering of mobile defects in functional materials can give rise to fundamentally new phases possessing ferroic and multiferroic functionalities. Here we develop the Landau theory for strain induced ordering of defects (e.g. oxygen vacancies) in thin oxide films, considering both the ordering and wavelength of possible instabilities. Using derived analytical expressions for the energies of various defect-ordered states, we calculated and analyzed phase diagrams dependence on the film-substrate mismatch strain, concentration of defects, and Vegard coefficients. Obtained results open possibilities to create and control superstructures of ordered defects in thin oxide films by selecting the appropriate substrate and defect concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Synergy effect in sonodegradation of organic dye using graphene based magnetite composite materials

Owing to the unique physical properties, nanographene platelets could act as a good recombination inhibitor for functional materials. In this study, various concentrations of nanographene platelets are introduced to ferromagnetic Fe{sub 3}O{sub 4} nanoparticles to remove methylene blue in aqueous solution under ultrasonic irradiation. The coupling of nanographene platelets with Fe{sub 3}O{sub 4} nanoparticles is formed using hydrothermal method. Compared to pure Fe{sub 3}O{sub 4} nanoparticles, Fe{sub 3}O{sub 4}–nanographene platelets (Fe{sub 3}O{sub 4}–NGP) composites exhibited higher catalytic efficiency for methylene blue removal under ultrasonic irradiation. The catalytic efficiency increase with increasing nanographene platelets loading from 1 wt.% until 5 wt% and further decreased. From the scavenger technique, it is revealed that hole plays an important key role in sonocatalytic processes. The degradation efficiency decreased only 12% after 4 cycled.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Short-Range Order Tunes Optical Properties in Long-Range Disordered ZnSnN2-ZnO Alloy

Local site ordering offers a new paradigm for property control in functional materials. However, systems that exhibit a propensity for local order and global disorder are often challenging to characterize, and demonstrations of ordering-induced property tuning are few and far between. Here, we demonstrate that short-range ordering tunes the optical absorption edge in the long-range disordered alloy system (ZnSnN2)1-x(ZnO)2x at x = 0.25. We use combinatorial cosputtering to synthesize a set of thin-film samples spanning this alloy space. X-ray diffraction demonstrates lattice contraction as a function of alloy composition, confirming that a mixed-anion and -cation alloy has been synthesized. Using N and O K-edge X-ray absorption near-edge structure in conjunction with simulations of cation-disordered supercell structures, we find that samples exhibit octet-rule-breaking motifs around both anions. Upon annealing at an alloy composition of x = 0.25, X-ray absorption analysis suggests that local motif structure shifts toward octet-rule-conserving while long-range disorder is maintained. Spectroscopic ellipsometry reveals that local ordering increases the absorption edge energy at constant composition. Additionally, alloy-induced optical absorption edge tuning is demonstrated. This work paves the way toward property tuning with short-range ordering in (ZnSnN2)1-x(ZnO)2x and beyond.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Machine Learning-Enabled Correlation and Modeling of Multimodal Response of Thin Film to Environment on Macro and Nanoscale Using “Lab-on-a-Crystal”

To close the feedback loop between artificial intellegence-controlled materials synthesis and characterization, material functionality must be rapidly tested. A platform for high-throughput multifunctional materials characterization is developed using a quartz crystal microbalance with auxiliary in-plane electrodes and a custom gas/vapor flow cell, enabling simultaneous scanning probe microscopy and electrical, optical, gravimetric, and viscoelastic characterization on the same film under controlled environment. The lab-on-a-crystal in situ multifunctional output allows direct correlations between the gravimetric/viscoelastic, electrical, and optical responses of polymer film in response to environment. Finally, when multiple film properties are used to augment the training set for machine learning regression, prediction of material response to the environment improves by a factor of 13 when <5% of the total dataset is used for model training.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Orienting an Organic Semiconductor into DNA 3D Arrays by Covalent Bonds

Abstract A quasi‐one‐dimensional organic semiconductor, hepta(p‐phenylene vinylene) (HPV), was incorporated into a DNA tensegrity triangle motif using a covalent strategy. 3D arrays were self‐assembled from an HPV‐DNA pseudo‐rhombohedron edge by rational design and characterized by X‐ray diffraction. Templated by the DNA motif, HPV molecules exist as single‐molecule fluorescence emitters at the concentration of 8 mM within the crystal lattice. The anisotropic fluorescence emission from HPV‐DNA crystals indicates HPV molecules are well aligned in the macroscopic 3D DNA lattices. Sophisticated nanodevices and functional materials constructed from DNA can be developed from this strategy by addressing functional components with molecular accuracy.

Wang, Xiao↗
DOE OSTI2023

Towards physics-informed explainable machine learning and causal models for materials research

From emergent material descriptions to estimation of properties stemming from structures to optimization of process parameters for achieving best performance – all key facets of materials science and related fields have experienced tremendous growth with the introduction of data-driven models. This gradual progression goes at par with developments of machine learning workflows, from purely data-driven shallow models to those that are well-capable in encoding more complex graphs, symbolic representations, invariances, and positional embeddings. Furthermore, this perspective aims at summarizing strategic aspects of such transitions while providing insights into the requirements of bringing in explainable, interpretable predictive models, and causal learning to aid in materials design and discovery. Although the focus remains on a variety of functional materials by providing a handful of case studies, the applications of such integrated methodologies are universal to facilitate fundamental understandings of materials physics while enabling autonomous experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Facile synthesis of self-assembled SnO nano-square sheets and hydrogen absorption characteristics

Graphical abstract: Display Omitted Highlights: ► Self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized. ► The average size of the nano-square sheets is about 200–400 nm. ► Direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. ► The hydrogen absorption capacity of as-synthesized material was 1.194 wt.% comparatively good. -- Abstract: Stannous oxide is an important functional material which contributes to a wide range of applications in energy storage and optoelectronic devices. In the present study, the single crystalline self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized with template-free hydrothermal growth method. The morphology, composition and structure were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) with selected area electron diffraction (SAED), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Raman spectroscopy, respectively. FESEM results have illustrated that the size of self-assembled 3D hierarchical polygon-shape structure of SnO is in the range of 8–12 μm and the average size of the nano-square sheets is about 100 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns have revealed that the prepared SnO nano-square sheets exist in single-crystalline nature. Two Raman modes A{sub 1g} = 211 cm{sup −1} and B{sub 1g} = 113 cm{sup −1} were observed by Raman spectroscopy, which is consistent with nano tetragonal phase SnO. Furthermore, the chemical valence of Sn and relative atomic composition of as-prepared SnO have been confirmed by X-ray photoelectron spectroscopy (XPS). Ultraviolet–visible–near infrared spectrophotometry was used to study the transmittance behavior of SnO nano-structures and direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. The first ever study on hydrogen absorption characteristics of SnO nano-square sheets performed at 373 K shows good absorption capacity of 1.194 wt.%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗