Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow lines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Radiative acceleration in outflows from broad absorption line quasi-stellar objects. 2: Wind models

We investigate the dynamics of radiatively driven broad absorption-line (BAL) outflows in quasi-stellar objects (QSOs) by developing radial and time-independent numerical models. Two limits are explored. The first assumes that the absorbing matter is not forced to comove with the substrate, which provides pressure confinement. This assumption allows us to explore in detail a case in which the acceleration is entirely due to radiation pressure. Using the parameters inferred from observations, we find that under these conditions radiative acceleration (mainly due to resonance line scattering) can readily accelerate the flow to the observed velocities. An important feature of the noncoupled flow is that the line profiles tend to stay relatively flat throughout the velocity interval covered by the line. We discuss how relaxing the assumptions of radial symmetry and time independent may help to explain the structures observed in BALs. In the second class of models, the absorbing flow is assumed to be completely coupled to the substrate in which it is embedded. Aside from being more plausible physically, these models produce line profiles that trail off at higher velocities, a behavior observed in some BALs. We show that, even if the substrate is massless, we have to assume a starting radius very close to the inferred radius of the broad emission-line region (approximately 0.1 pc) in order to obtain a significant contribution from radiative acceleration, given a typical active galactic nucleus (AGN) spectrum. The reason is that the energy input needed to pressurize the substrate, allowing the flow to become supersonic and to retain a reasonable ionization equilibrium, at the same time contributes appreciably to the acceleration. A way to relax the small starting radius constraint is to use a softer ionizing spectrum.

Arav, Nahum↗
NASA NTRS1978

Solution of axisymmetric and two-dimensional inviscid flow over blunt bodies by the method of lines

Comparisons with experimental data and the results of other computational methods demonstrated that very accurate solutions can be obtained by using relatively few lines with the method of lines approach. This method is semidiscrete and has relatively low core storage requirements as compared with fully discrete methods since very little data were stored across the shock layer. This feature is very attractive for three dimensional problems because it enables computer storage requirements to be reduced by approximately an order of magnitude. In the present study it was found that nine lines was a practical upper limit for two dimensional and axisymmetric problems. This condition limits application of the method to smooth body geometries where relatively few lines would be adequate to describe changes in the flow variables around the body. Extension of the method to three dimensions was conceptually straightforward; however, three dimensional applications would also be limited to smooth body geometries although not necessarily to total of nine lines.

Hamilton, H. H., II↗
NASA NTRS1993

In-flight pressure distributions and skin-friction measurements on a subsonic transport high-lift wing section

Flight experiments are being conducted as part of a multiphased subsonic transport high-lift research program for correlation with wind-tunnel and computational results. The NASA Langley Transport Systems Research Vehicle (B737-100 aircraft) is used to obtain in-flight flow characteristics at full-scale Reynolds numbers to contribute to the understanding of 3-D high-lift, multi-element flows including attachment-line transition and relaminarization, confluent boundary-layer development, and flow separation characteristics. Flight test results of pressure distributions and skin friction measurements were obtained for a full-chord wing section including the slat, main-wing, and triple-slotted, Fowler flap elements. Test conditions included a range of flap deflections, chord Reynolds numbers (10 to 21 million), and Mach numbers (0.16 to 0.40). Pressure distributions were obtained at 144 chordwise locations of a wing section (53-percent wing span) using thin pressure belts over the slat, main-wing, and flap elements. Flow characteristics observed in the chordwise pressure distributions included leading-edge regions of high subsonic flows, leading-edge attachment-line locations, slat and main-wing cove-flow separation and reattachment, and trailing-edge flap separation. In addition to the pressure distributions, limited skin-friction measurements were made using Preston-tube probes. Preston-tube measurements on the slat upper surface suggested relaminarization of the turbulent flow introduced by the pressure belt on the slat leading-edge surface when the slat attachment line was laminar. Computational analysis of the in-flight pressure measurements using two-dimensional, viscous multielement methods modified with simple-sweep theory showed reasonable agreement. However, overprediction of the pressures on the flap elements suggests a need for better detailed measurements and improved modeling of confluent boundary layers as well as inclusion of three-dimensional viscous effects in the analysis.

Yip, Long P.↗
NASA NTRS1977

Engine Hydraulic Stability

An analytical injector model was developed specifically to analyze combustion instability coupling between the injector hydraulics and the combustion process. This digital computer dynamic injector model will, for any imposed chamber of inlet pressure profile with a frequency ranging from 100 to 3000 Hz (minimum) accurately predict/calculate the instantaneous injector flowrates. The injector system is described in terms of which flow segments enter and leave each pressure node. For each flow segment, a resistance, line lengths, and areas are required as inputs (the line lengths and areas are used in determining inertance). For each pressure node, volume and acoustic velocity are required as inputs (volume and acoustic velocity determine capacitance). The geometric criteria for determining inertances of flow segments and capacitance of pressure nodes was set. Also, a technique was developed for analytically determining time averaged steady-state pressure drops and flowrates for every flow segment in an injector when such data is not known. These pressure drops and flowrates are then used in determining the linearized flow resistance for each line segment of flow.

Kesselring, R. C.↗
NASA NTRS1986

Vortex shedding flow meter performance at high flow velocities

In some of the ducts of the Space Shuttle Main Engine (SSME), the maximum liquid oxygen flow velocities approach 10 times those at which liquid flow measurements are normally made. The hydrogen gas flow velocities in other ducts exceed the maximum for gas flow measurement by more than a factor of 3. The results presented here show from water flow tests that vortex shedding flow meters of the appropriate design can measure water flow to velocities in excess of 55 m/s, which is a Reynolds number of about 2 million. Air flow tests have shown that the same meter can measure flow to a Reynolds number of at least 22 million. Vortex shedding meters were installed in two of the SSME ducts and tested with water flow. Narrow spectrum lines were obtained and the meter output frequencies were proportional to flow to + or - 0.5% or better over the test range with no flow conditioning, even though the ducts had multiple bends preceeding the meter location. Meters with the shedding elements only partially spanning the pipe and some meters with ring shaped shedding elements were also tested.

Siegwarth, J. D.↗
NASA NTRS1980

The finite element duct eigenvalue problem - An improved formulation with Hermitian elements and no-flow condensation

Hermitian elements are used in a finite element solution for the eigenvalue problem in lined ducts with flow. These elements give significantly greater accuracy for reduced dimensionality when compared with Lagrangian elements. Spurious mode generation associated with the Lagrangian formulation is eliminated. A dramatic improvement in the ratio of the number of reliable eigenvalues to the total number of computed eigenvalues is effected by the use of a condensation scheme based on the no-flow eigenvectors. Results are presented for two dimensional and axisymmetric ducts. In the axisymmetric case good resolution is obtained even for high order, high frequency modes by the use of continuously graded meshes.

Astley, R. J.↗
NASA NTRS1979

A marching method for calculating line and continuum radiation in high energy flow fields

A method is presented for calculating nongrey radiative fluxes and intensities in a highly ionized, low temperature plasma with extreme line broadening. The method was developed to study radiative heating phenomena in the mass-injected hypersonic shock-layer environments characteristic of outer planet atmospheric entry, although it is not limited to such studies. The radiative properties model assumed local thermodynamic equilibrium and used standard continuum and molecular band models. The atomic line model, however, used a frequency-marching method for the frequency integration, which not only accounted completely for line overlapping (reabsorption) effects, but compared favorably in economy with the best equivalent-width methods. An assessment of hydrogen line-far-wing treatments, with recommendations for engineering models, is also presented.

Bolz, C. W., Jr.↗
NASA NTRS1983

Effect of flow on the acoustic performance of extended reaction lined ducts

A model is developed for the effects of uniform and boundary-layer mean flow on the attenuation and propagation of harmonically excited sound waves in an extended reaction lined cylindrical duct. A duct geometry consisting of an annular outer region of bulk material surrounding an inner cylinder of air is utilized. A numerical solution is obtained for the coupled wave equations governing the motion of the sound in both the inner and annular regions. It is found that the numerically predicted attenuation and propagations constants are in excellent agreement with measured values using Kevlar as the liner material for plane-wave mode (O,O) excitation over a wide range of mean flows and sound frequency. The boundary-layer effects are determined to be unimportant, at least for plane-wave sound. In addition, numerical studies indicate small differences between the use of either the radial velocity or the radial displacement boundary conditions.

Hersh, A. S.↗
NASA NTRS2007

Physics of the Dayside Magnetosphere: New Results From a Hybrid Kinetic Code

We use a global hybrid code kinetic model to demonstrate how kinetic processes at the bow shock and within the foreshock can dramatically modify the solar wind just before its interaction with the magnetosphere. During periods of steady radial interplanetary magnetic field (IMF) orientation, the foreshock fills with a diffuse population of suprathermal ions. The ions generate cavities marked by enhanced temperatures, depressed densities, and diminished magnetic field strengths that convect antisunward into the bow shock with the solar wind flow. Tangential discontinuities marked by inward-pointing electric fields and normals transverse to the Sun-Earth line generate hot flow anomalies marked by hot tenuous plasmas bounded by outward propagating shocks. When the motional electric field in the magnetosheath points inward towards the Earth, a solitary bow shock appears. For typical IMF orientations, the solitary shocks should appear at poorly sampled high latitudes, but for strongly northward or southward IMF orientations the solitary shocks should appear on the flanks of the magnetosphere. Although quasi-perpendicular, solitary shocks should be marked by turbulent magnetosheath flows, often directed towards the Sun-Earth line, and abrupt spike-like enhancements in the density and magnetic field strength at the shock. Finally,we show how flux transfer events generated between parallel subsolar reconnection lines are destroyed upon encountering the magnetopause at latitudes above the cusp.

Siebeck, D. G.↗
DOE OSTI2019

Role of poloidal E × B drift in divertor heat transport in DIII‐D

Abstract Simulations for DIII‐D high confinement mode plasmas with the multifluid code UEDGE show a strong role of poloidal E × B drifts on divertor heat transport, challenging the paradigm of conduction‐limited scrape‐off layer (SOL) transport. While simulations with reduced drift magnitude are well aligned with the assumption that electron heat conduction dominates the SOL heat transport, simulations with drifts predict that the poloidal convective E × B heat transport dominates over electron heat conduction in both attached and detached conditions. As poloidal E × B flow propagates across magnetic field lines, poloidal transport with shallow magnetic pitch angles can reach values that are of the same order as would be provided by sonic flows parallel to the field lines. These flows can lead to strong convection‐dominated divertor heat transport, increasing the poloidal volume of radiative power front, consistent with previous measurements at DIII‐D. Due to these convective flows, the Lengyel integral approach, assuming zero convective fraction, is expected to provide a pessimistic estimate for the radiative capability of impurities in the divertor. For the DIII‐D simulations shown here, the Lengyel integral approach underestimates the radiated power by a factor of 6, indicating that, for reliable DIII‐D divertor power exhaust predictions, full two‐dimensional (2D) calculations, including drifts, would be necessary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

On eigensolutions for discontinuous liners in a duct containing uniform mean flow

Sound attenuation in a rectangular acoustically lined duct containing uniform mean flow is analytically investigated using the generalized Wiener-Hopf technique. Uniqueness of the solution is enforced for lined sections of the finite axial extent by imposing edge conditions at the liner interface. Possible edge conditions are considered, including the Kutta condition, and the causal solution corresponding to edge conditions is considered the best choice. Solution methods such as the mode matching and singularity methods imply differing edge conditions, and results show that power attenuation is insensitive to the imposed edge conditions, although significant differences are observed for the reflection coefficient. The amplitude of the exponentially increasing instability mode in the lined section must be set to zero as a first approximation to the nonlinear situation, and results indicate that measurements of the reflection factor can be used to make a more definite decision about physically appropriate edge conditions.

Koch, W.↗
DOE OSTI2021

Soil Sampling Results for Closure of a Portion of Solid Waste Management Unit #16

The U.S. Department of Energy/National Nuclear Security Administration (DOE/ NNSA) and National Technology & Engineering Solutions of Sandia, LLC (NTESS), the management and operating contractor for Sandia National Laboratories/California (SNL/CA), has prepared this soil sampling results report for closure of a portion of Solid Waste Management Unit (SWMU) #16. The entire network of SNL/CA sanitary sewer lines, including building laterals, was identified as SWMU #16 under a Resource Conservation and Recovery Act (RCRA) Facility Assessment conducted for SNL/CA in April 1991 (DOE 1992). Along with the previous SWMU #16 investigation results (SNL/CA 2019), the results of this investigation are intended to support closure decisions by the San Francisco Bay Regional Water Quality Control Board (RWQCB), as discussed below. SNL/CA personnel completed upgrading its sanitary sewer discharge network in 2019. These upgrades included installing new sections of underground lines and decommissioning certain sections of the old piping system by capping in place. To date, several sections of the sewer line have been abandoned-in-place by capping as new sewer lines were installed or flow was rerouted to other existing lines. To formally close these abandoned sections of the sewer line, the RWQCB required that SNL/CA personnel collect soil samples to be analyzed for contaminants potentially released from the sewer lines. SNL/CA personnel hired Weiss Associates (Weiss) of Emeryville, California to prepare a sampling and analysis plan, implement the sampling plan and report the results of the investigation under Purchase Order #2166257. The Sampling and Analysis Plan for Partial Closure of Solid Waste Management Unit #16 (SAP) was submitted to the RWQCB on August 14, 2020 by Weiss on behalf of SNL/CA. The RWQCB approved the SAP on September 30, 2020 after Weiss updated the method detection limit and reporting limits for total polychlorinated biphenyls (PCBs) and individual aroclors. Soil sampling was conducted in accordance with the SAP except that fewer locations were sampled due to site constraints, as discussed below. This report presents the results of the sampling effort and documents all associated field activities including borehole clearing, soil sample collection, storage and transportation to the analytical laboratories, borehole backfilling and surface restoration, and storage of investigation-derived waste (IDW) for future profiling and disposal by SNL/CA waste management personnel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1980

Development of a Kevlar/PMR-15 reduced drag DC-9 nacelle fairing

The paper describes an advanced composite fairing designed to reduce drag on DC-9 nacelles as a part of the NASA Engine Component Improvement Program. This fairing is the aft enclosure for the thrust reverser actuator system on JT8D engine nacelles and is subjected to a 500 F exhaust flow during the reverse thrust. A reduced-drag configuration was developed by using in-flight tuft surveys for flow visualization in order to identify areas with low-quality flow, and then modifying the aerodynamic lines to improve the flow. A fabrication method for molding the part in an autoclave was developed; this material system is suitable for 500 F. The resultant composite fairing reduces the overall aircraft drag 1% with a weight reduction of 40% when compared with a metal component.

Kawai, R. T.↗
NASA NTRS1982

Three-dimensional separation and reattachment

The separation of three dimensional turbulent boundary layers from the lee of flight vehicles at high angles of attack is investigated. The separation results in dominant, large scale, coiled vortex motions that pass along the body in the general direction of the free stream. In all cases of three dimensional flow separation and reattachment, the assumption of continuous vector fields of skin friction lines and external flow streamlines, coupled with simple laws of topology, provides a flow grammar whose elemental constituents are the singular points: the nodes, spiral nodes (foci), and saddles. The phenomenon of three dimensional separation may be construed as either a local or a global event, depending on whether the skin friction line that becomes a line of separation originates at a node or a saddle point.

Peake, D. J.↗
NASA NTRS1982

Three-dimensional separation and reattachment

The separation of three dimensional turbulent boundary layers from the lee of flight vehicles at high angles of attack is investigated. The separation results in dominant, large scale, coiled vortex motions that pass along the body in the general direction of the free stream. In all cases of three dimensional flow separation and reattachment, the assumption of continuous vector fields of skin friction lines and external flow streamlines, coupled with simple laws of topology, provides a flow grammar whose elemental constituents are the singular points: the nodes, spiral nodes (foci), and saddles. The phenomenon of three dimensional separation may be constrained as either a local or a global event, depending on whether the skin friction line that becomes a line of separation originates at a node or a saddle point.

Peake, D. J.↗
NASA NTRS1987

Evaluation of flow topology from numerical data

Results obtained from numerical calculations and modern (optical) diagnostics are often too complicated for manual inspection, manipulation and display. A simpler but still accurate description of these results is needed to facilitate data understanding. The paper discusses preliminary investigations into methods for the decomposition of 2-D and 3-D fluid flow data bases into elementary structures for purposes of description, analysis and comparison. An approach which involves the development of scene-like representation of the flow topology is presented. Using features such as critical points and dividing streamlines as a basis, a representation of the global topology of the flow is generated. The topology is then represented by a graph with the various structures represented by the nodes and their relationships in the flow by the connecting lines of the graph. Once the flow field has been placed in this form, it can be studied and compared with other data sets using techniques of syntactic pattern recognition or displayed using 3-D graphics techniques.

Hesselink, Lambertus↗
NASA NTRS1992

Experimental results for a hypersonic nozzle/afterbody flow field

The flow field created by the interaction of a single-expansion-ramp-nozzle (SERN) flow with a hypersonic external stream has been experimentally characterized using a generic nozzle/afterbody model in the 3.5-foot hypersonic wind tunnel of the NASA Ames Research Center. The presented results include oil-flow and shadowgraph flow visualization photographs, afterbody surface-pressure distributions, boundary layer rake measurements, and Preston-tube skin-friction measurements. The design, construction, and operation of the model was found to be successful. Surface oil-flow patterns show that the jet-plume flow attaches to the afterbody surface at jet pressure ratios between 154 and 234. The oil flow also shows the pattern of lines where the jet flow separates from the ramp, apparently as a result of interaction of the jet-plume internal shock wave with the ramp boundary layer.

Spaid, Frank W.↗
NASA NTRS1944

The "limiting line" in mixed subsonic and supersonic flow of compressible fluids

It is well known that the vorticity for any fluid element is constant if the fluid is non-viscous and the change of state of the fluid is isentropic. When a solid body is placed in a uniform stream, the flow far ahead of the body is irrotational. Then if the flow is further assumed to be isentropic, the vorticity will be zero over the whole filed of flow. In other words, the flow is irrotational. For such flow over a solid body, it is shown by Theodorsen that the solid body experiences no resistance. If the fluid has a small viscosity, its effect will be limited in the boundary layer over the solid body and the body will have a drag due to the skin friction. This type of essentially isentropic irrotational flow is generally observed for a streamlined body placed in a uniform stream, if the velocity of the stream is kept below the so-called "critical speed." At the critical speed or rather at a certain value of the ratio of the velocity of the undisturbed flow and the corresponding velocity of sound, shock waves appear. This phenomenon is called the "compressibility bubble." Along a shock wave, the change of state of the fluid is no longer isentropic, although still adiabatic. This results in an increase in entropy of the fluid and generally introduces vorticity in an originally irrotational flow. The increase in entropy of the fluid is, of course, the consequence of changing part of the mechanical energy into heat energy. In other words, the part of fluid affected by the shock wave has a reduced mechanical energy. Therefore, with the appearance of shock waves, the wake of the streamline body is very much widened, and the drag increases drastically. Furthermore, the accompanying change in the pressure distribution over the body changes the aerodynamic moment acting on it and in the case of an airfoil decreases the lift force. All these consequences of the breakdown of isentropic irrotational flow are generally undesirable in applied aerodynamics. Its occurrence should be delayed as much as possible by modifying the shape or contour of the body. However, such endeavor will be very much facilitated if the cause or the criterion for the breakdown can be found first.

MACH NUMBER↗