Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Possible flow regimes of adiabatic one-dimensional compressible fluid flow with friction in convergent and divergent ducts.

An analytical solution for the compressible one-dimensional flow in convergent and divergent ducts with friction is obtained. It is found that a nondimensional parameter, N, can be formed using the friction factor, duct half-angle and the ratio of specific heats of the gas. Seven flow regimes are describable with the solution, based on certain bounds on the magnitude of N. The regimes are discussed and corollary data are presented graphically.

Shouman, A. R.↗
NASA NTRS1974

A source flow characteristic technique for the analysis of scramjet exhaust flow field

The factors which influence the design and selection of a nozzle for a hypersonic scramjet are described. A two dimensional second-order characteristic procedure capable of analyzing the aerodynamic performance of typical nozzle configurations is presented. Equations of motion governing the two dimensional, axisymmetric, or axially expanding inviscid flow of a gas mixture, with frozen chemistry, are provided. Diagrams of the flow conditions for various configurations are included.

Delguidice, P.↗
NASA NTRS1973

Flow processes in overexpanded chemical rocket nozzles. Part 1: Flow separation

An investigation was made of published nozzle flow separation data in order to determine the parameters which affect the separation condition. A comparison of experimental data with empirical and theoretical separation prediction methods leads to the selection of suitable equations for the separation criterion. The results were used to predict flow separation of the main space shuttle engine.

Schmucker, R. H.↗
NASA NTRS1975

An improved source flow characteristic technique for the analysis of scramjet exhaust flow fields

The process is discussed of designing a nozzle for a hypersonic airbreathing vehicle which involves a complex study of the inter-relationship among many parameters: internal-external expansion, vehicle lift, drag, pitching moments, and structural and weight limitations. The source flow characteristic approach to the design process was extended and improved, and streamline interpolation procedure was incorporated. All characteristic and boundary calculations were made compatible with frozen, equilibrium and ideal gas thermodynamic options, while slip surface calculations (cowl interaction) were extended to underexpanded flow conditions. Since viscous forces can significantly influence vehicle forces, pitching moments and structural/weight considerations, a local integration via flat plate boundary layer skin friction and heat transfer coefficients was included. These effects are calculated using the Spalding and Chi method, and all force and moment calculations are performed via integration of the local forces acting on the specified vehicle wetted areas.

Delguidice, P. D.↗
NASA NTRS1979

A new flow model for highly separated airfoil flows at low speeds

An analytical model for separated airfoil flows is presented which is based on experimentally observed physical phenomena. These include a free stagnation point aft of the airfoil and a standing vortex in the separated region. A computer program is described which iteratively matches the outer potential flow, the airfoil turbulent boundary layer, the separated jet entrainment, mass conservation in the separated bubble, and the rear stagnation pressure. Separation location and pressure are not specified a priori. Results are presented for surface pressure coefficient and compared with experiment for three angles of attack for a GA(W)-1, 17% thick airfoil.

Zumwalt, G. W.↗
NASA NTRS1981

Curved-flow, rolling-flow, and oscillatory pure-yawing wind-tunnel test methods for determination of dynamic stability derivatives

The test capabilities of the Stability Wind Tunnel of the Virginia Polytechnic Institute and State University are described, and calibrations for curved and rolling flow techniques are given. Oscillatory snaking tests to determine pure yawing derivatives are considered. Representative aerodynamic data obtained for a current fighter configuration using the curved and rolling flow techniques are presented. The application of dynamic derivatives obtained in such tests to the analysis of airplane motions in general, and to high angle of attack flight conditions in particular, is discussed.

Chambers, J. R.↗
NASA NTRS1979

Flow and thermal effects in continuous flow electrophoresis

In continuous flow electrophoresis the axial flow structure changes from a fully developed rectilinear form to one characterized by meandering as power levels are increased. The origin of this meandering is postulated to lie in a hydrodynamic instability driven by axial (and possibly lateral) temperature gradients. Experiments done at MSFC show agreement with the theory.

Saville, D. A.↗
NASA NTRS1982

Mean-flow measurements of the flow field diffusing bend

Time-average measurements of the low-speed turbulent flow in a diffusing bend are presented. The experimental geometry consists of parallel top and bottom walls and curved diverging side walls. The turning of the center line of this channel is 40 deg, the area ratio is 1.5 and the ratios of height and center-line length to throat width are 1.5 and 3, respectively. The diffusing bend is preceded and followed by straight constant area sections. The inlet boundary layers on the parallel walls are artificially thickened and occupy about 30% of the channel height; those on the side walls develop naturally and are about half as thick. The free-stream speed at the inlet was approximately 30 m/sec for all the measurements. Inlet boundary layer mean velocity and turbulence intensity profiles are presented, as are data for wall static pressures, and at six cross sections, surveys of the velocity-vector and static-pressure fields. The dominant feature of the flow field is a pair of counter-rotating streamwise vortices formed by the cross-stream pressure gradient in the bend on which an overall deceleration is superimposed.

Mcmillan, O. J.↗
NASA NTRS1982

The aerodynamic performance of several flow control devices for internal flow systems

An experimental reseach and development program was undertaken to develop and document new flow-control devices for use in the major modifications to the 40 by 80 Foot wind tunnel at Ames Research Center. These devices, which are applicable to other facilities as well, included grid-type and quasi-two-dimensional flow straighteners, louver panels for valving, and turning-vane cascades with net turning angles from 0 deg to 90 deg. The tests were conducted at model scale over a Reynolds number range from 2 x 100,000 to 17 x 100,000, based on chord. The results showed quantitatively the performance benefits of faired, low-blockage, smooth-surface straightener systems, and the advantages of curved turning-vanes with hinge-line gaps sealed and a preferred chord-to-gap ratio between 2.5 and 3.0 for 45 deg or 90 deg turns.

Eckert, W. T.↗
NASA NTRS1983

On issues concerning flow separation and vortical flows in 3 dimensions

This review provides an illustrated introduction laying the knowledge base for vortical flows about three dimensional configurations that are of typical interest to aerodynamicists and researchers in fluid mechanics. The paper then compiles a list of ten issues, again in illustrative format, that the authors deem important to the understanding of complex vortical flows. These issues and our responses to them provide, it is hoped, a skeletal framework on which to hang the ensuing conference proceedings.

Peake, D. J.↗
NASA NTRS1983

Flow processes in overexpanded chemical rocket nozzles. Part 3: Methods for the aimed flow separation and side load reduction

Methods aimed at reduction of overexpansion and side load resulting from asymmetric flow separation for rocket nozzles with a high opening ratio are described. The methods employ additional measures for nozzles with a fixed opening ratio. The flow separation can be controlled by several types of nozzle inserts, the properties of which are discussed. Side loads and overexpansion can be reduced by adapting the shape of the nozzle and taking other additional measures for controlled separation of the boundary layer, such as trip wires.

Schmucker, R. H.↗
NASA NTRS1984

Flow processes in overexpanded chemical rocket nozzles. Part 1: Flow separation

An investigation was made of published nozzle flow separation data in order to determine the parameters which affect the separation conditions. A comparison of experimental data with empirical and theoretical separation prediction methods leads to the selection of suitable equations for the separation criterion. The results were used to predict flow separation of the main space shuttle engine.

Schmucker, R. H.↗
NASA NTRS1985

First derivatives of flow quantities behind two-dimensional, nonuniform supersonic flow over a convex corner

A method of determining spatial derivatives of flow quantities behind an expansion fan as a function of the curvature of the streamline behind the fan is developed. Taylor series expansions of flow quantities within the fan are used and boundary conditions satisfied to the first and second order so that the curvature of the characteristics in the fan may be determined. A system of linear equations for the spatial derivatives is then developed. An application of the method to shock coalescence including asymmetric effects is described.

Darden, C. M.↗
NASA NTRS1986

Integration effects of underwing forward- and rearward-mounted separate-flow, flow-through nacelles on a high-wing transport

An experimental investigation was conducted in the Langley 16-Foot Transonic Tunnel at free-stream Mach numbers from 0.70 to 0.82 and angles of attack from -2.5 to 4.0 degrees to determine the integration effects of pylon-mounted underwing forward and rearward separate-flow, flow-through nacelles on a high-wing transonic transport configuration. The results showed that the installed drag of the nacelle/pylon in the rearward location was slightly less than that of the nacelle/pylon in the forward location. This reduction was due to the reduction in calculated skin friction of the nacelle/pylon configuration. In all cases the combined value of form, wave, and interference drag was excessively high. However, the configuration with the nacelle/pylon in a rearward location produced an increase in lift over that of the basic wing-body configuration.

Lamb, M.↗
NASA NTRS1986

Inverse design of axisymmetric flow passages using compressible viscous flow theory

A study reported by Yang and Hudson (1971) was extended by Nelson (1971), who presented a method of inverse design for axisymmetric diffusers. The diffusers obtained with the aid of this method were found to function well under certain conditions, while, for other cases, a modification of the analytical design procedure was required. An outline is provided of the method of inverse solution in simple axisymmetric internal flow passages. Attention is given to governing equations, the method of solution, and examples which illustrate the feasibility of the design procedure. The discussed method, which is based on viscous compressible flow theory, has some limitations. However, it is expected to yield good designs in many practical cases in which the existing design must be modified.

Ntone, F.↗