Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Software compensated multichannel pressure sensing system

A PC-based software system is described which can be used for data acquisition and thermal-error correction of a multichannel pressure-sensor system developed for use in a cryogenic environment. The software incorporates pressure-sensitivity and sensor-offset compensation files into thermal error-correction algorithms, and the sensors are calibrated by simulating the operating conditions. The system is found to be effective in the collecting, storing, and processing of multichannel pressure-sensor data to correct thermally induced offset and sensitivity errors.

Chapman, John J.↗

A simplified algorithm for correcting both errors and erasures of R-S codes

Using the finite field transform and continued fractions, a simplified algorithm for decoding Reed-Solomon (R-S) codes is developed to correct erasures caused by other codes as well as errors over the finite field GF (q(m), where q is a prime and m is an integer. Such an R-S decoder can be faster and simpler than a decoder that uses more conventional methods.

Reed, I. S.↗

Synchronous detection of cosmic rays and correlated errors in superconducting qubit arrays

Quantum information processing at scale will require sufficiently stable and long-lived qubits, likely enabled by error-correction codes. Several recent superconducting-qubit experiments, however, reported observing intermittent spatiotemporally correlated errors that would be problematic for conventional codes, with ionizing radiation being a likely cause. Here, we directly measured the cosmic-ray contribution to spatiotemporally correlated qubit errors. We accomplished this by synchronously monitoring cosmic-ray detectors and qubit energy-relaxation dynamics of 10 transmon qubits distributed across a 5 × 5 × 0.35 mm 3 silicon chip. Cosmic rays caused correlated errors at a rate of $1/\left(592\begin{array}{c}+48\\ -41\end{array}\,{\rm{s}}\right)$, accounting for 17.1 ± 1.3% of all such events. Our qubits responded to essentially all of the cosmic rays and their secondary particles incident on the chip, consistent with the independently measured arrival flux. Moreover, we observed that the landscape of the superconducting gap in proximity to the Josephson junctions dramatically impacts the qubit response to cosmic rays. Given the practical difficulties associated with shielding cosmic rays, our results indicate the importance of radiation hardening—for example, superconducting gap engineering—to the realization of robust quantum error correction.

Science & Technology - Other Topics↗

CCSDS Reed Solomon VLSI chip set

A highly efficient error correcting code has been selected by NASA as a CCSDS standard: the 16 symbol error correcting Reed Solomon code. A VLSI implementation of this decoder is described in this paper. A total of 4 full custom VLSI chips are needed that correct data in real time at an sustained rate of up to 80 Mbits/second.

Cameron, K.↗

High Earth orbit design for lunar assisted small Explorer class missions

Small Expendable launch vehicles are capable of injecting modest payloads into high Earth orbits having apogee near the lunar distance. However, lunar and solar perturbations can quickly lower perigee and cause premature reentry. Costly perigee raising maneuvers by the spacecraft are required to maintain the orbit. In addition, the range of inclinations achievable is limited to those of launch sites unless costly spacecraft maneuvers are performed. This study investigates the use of a lunar swingby in a near-Hohmann transfer trajectory to raise perigee into the 8 to 25 solar radius range and reach a wide variety of inclinations without spacecraft maneuvers. It is found that extremely stable orbits can be obtained if the postencounter spacecraft orbital period is one-half of a lunar sidereal revolution and the Earth-vehicle-Moon geometry is within a specified range. Criteria for achieving stable orbits with various perigee heights and ecliptic inclinations are developed, and the sensitivity of the resulting mission orbits to transfer trajectory injection (TTI) errors is examined. It is shown that carefully designed orbits yield lifetimes of several years, with excellent ground station coverage characteristics and minimal eclipses. A phasing loop error correction strategy is considered with the spacecraft propulsion system delta V demand for TTI error correction and a postlunar encounter apogee trim maneuver typically in the 30 to 120 meters per second range.

Mathews, M.↗

Impact of error fields and error field correction on heat fluxes in SPARC

Using a single toroidal array of coils to reduce the m,n = 2,1 resonant error field (EF) produced by the misalignment of the axisymmetric coils in SPARC can result in the enhancement of the local divertor heat fluxes. Managing high divertor heat fluxes (q ∥ $\simeq$ 10 GW m -2 ) poses a challenge for compact tokamak devices such as SPARC. The presence of non-axisymmetric magnetic field perturbations adds complexity to the problem by generating intricate 3D edge magnetic topologies that alter the heat flux distributions on the target plates. The aim of this work is to investigate the impact of the EF correction (EFC) on the heat fluxes at the divertor plates in SPARC. The MHD code M3DC1 has been used to simulate the 3D magnetic perturbations generated by the shift and tilt of several axisymmetric coils within specified tolerances, as well as from the array of EFC coils located at the midplane. Using a heuristic model that extends the concept of an axisymmetric heat flux layer to 3D plasmas, the resultant heat flux distributions is derived from magnetic footprints calculated with the MAFOT code. The results show that the EFC could either decrease or further enhance the local heat flux when used to correct the m,n = 2,1 resonant EF to enhance the core plasma performance.

3D fields↗

High data rate Reed-Solomon encoding and decoding using VLSI technology

Presented as an implementation of a Reed-Solomon encode and decoder, which is 16-symbol error correcting, each symbol is 8 bits. This Reed-Solomon (RS) code is an efficient error correcting code that the National Aeronautics and Space Administration (NASA) will use in future space communications missions. A Very Large Scale Integration (VLSI) implementation of the encoder and decoder accepts data rates up 80 Mbps. A total of seven chips are needed for the decoder (four of the seven decoding chips are customized using 3-micron Complementary Metal Oxide Semiconduction (CMOS) technology) and one chip is required for the encoder. The decoder operates with the symbol clock being the system clock for the chip set. Approximately 1.65 billion Galois Field (GF) operations per second are achieved with the decoder chip set and 640 MOPS are achieved with the encoder chip.

Miller, Warner↗

Error field correction strategies in preparation to MAST-U operation

In magnetic fusion devices, unwanted non-axisymmetric magnetic field perturbations, known as error fields (EF), can have detrimental effects on plasma stability and confinement. Such EFs may originate from several sources, such as axi-symmetric coil misalignments, coil feeds, 3D structures in the wall surrounding the plasma, presence of ferromagnetic materials near the plasma surface, blanket materials in future devices. To minimize their impact on plasma performance and on the available operational space, it is important to identify the EF sources and develop EF control strategies. MAST Upgrade (MAST-U) is a spherical tokamak which will operate in the near future after a series of enhancements from the previous MAST experiment. To deliver a machine with EF amplitude low enough to allow a high quality experimental programme, systematic analysis of the intrinsic EF sources has been carried out for poloidal eld (P) and divertor (D) coils. To deliver a machine with EF amplitude low enough to allow a high quality experimental programme, systematic analysis of the intrinsic EF sources has been carried out for poloidal field (P) and divertor (D) coils, whose magnetic eld measurements were available when writing this paper. Such measurements reveal that P and D coils are 3D deformed and thus are responsible for intrinsic EFs, with mainly n=1 and n=2 toroidal mode numbers. In preparation to MAST-U operation, both passive and active EF control strategies have been adopted for n=1 and n=2 EFs compensation. Passive EF control consisted of installing finely each D and P coil within MAST-U device so as to minimize the intrinsic n=1 EF amplitude. The optimal coil alignment has been determined based on magnetic eld measurements and the corresponding 3D electro-magnetic modelling, and envisaged coil shift and tilt of 3.2 mm and 0.7 mrad, respectively, in the case of P coil named P4. Conversely, active control will be use during MAST-U operation to reduce the n=2 EF which is associated mainly with P4 and P5, as well. Since these coils have been re-used from the MAST device, studies attempting n=2 EF control, based on MAST plasmas, have been modelled utilizing the MARS-F code to interpret experimental results in MAST and to give hints for future n=2 EF control studies in MAST-U. Here, a model-based control set for n=2 EF control has been identified which would allow for the minimization of rotation braking, of the resonant magnetic field at the q=2 and of the plasma displacement in MAST-U, simultaneously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Asymmetric Memory Circuit Would Resist Soft Errors

Some nonlinear error-correcting codes more efficient in presence of asymmetry. Combination of circuit-design and coding concepts expected to make integrated-circuit random-access memories more resistant to "soft" errors (temporary bit errors, also called "single-event upsets" due to ionizing radiation). Integrated circuit of new type made deliberately more susceptible to one kind of bit error than to other, and associated error-correcting code adapted to exploit this asymmetry in error probabilities.

Buehler, Martin G.↗

Boundaries of quantum supremacy via random circuit sampling

Abstract Google’s quantum supremacy experiment heralded a transition point where quantum computers can evaluate a computational task, random circuit sampling, faster than classical supercomputers. We examine the constraints on the region of quantum advantage for quantum circuits with a larger number of qubits and gates than experimentally implemented. At near-term gate fidelities, we demonstrate that quantum supremacy is limited to circuits with a qubit count and circuit depth of a few hundred. Larger circuits encounter two distinct boundaries: a return of a classical advantage and practically infeasible quantum runtimes. Decreasing error rates cause the region of a quantum advantage to grow rapidly. At error rates required for early implementations of the surface code, the largest circuit size within the quantum supremacy regime coincides approximately with the smallest circuit size needed to implement error correction. Thus, the boundaries of quantum supremacy may fortuitously coincide with the advent of scalable, error-corrected quantum computing.

97 MATHEMATICS AND COMPUTING↗

Leveraging Quantum Sensors for Dark Matter Detection

Recent measurements have demonstrated that superconducting qubit decoherence is affected by radiation. As a result, many groups around the world are working to better understand the relationship between different types of radiation and qubit response. This crucial to quantum error correction because radiation can cause correlated loss of information across multiple qubits on a chip, defeating error correction algorithms. Additionally, the fundamental energy scale at which superconducting qubits operate may enable their development as meV-scale detectors for HEP applications, such as the direct detection of dark matter. At Fermilab, we have two world-class underground facilities which are already being used to study this problem: NEXUS and QUIET. I will present on results from operating superconducting qubits in each of these facilities, and the potential implications towards utilizing qubits as sensors for a novel dark matter detector.

Baxter, Daniel [Texas U., Arlington]↗

Leveraging Quantum Sensors for Dark Matter Detection

Recent measurements have demonstrated that superconducting qubit decoherence is affected by radiation. As a result, many groups around the world are working to better understand the relationship between different types of radiation and qubit response. This crucial to quantum error correction because radiation can cause correlated loss of information across multiple qubits on a chip, defeating error correction algorithms. Additionally, the fundamental energy scale at which superconducting qubits operate may enable their development as meV-scale detectors for HEP applications, such as the direct detection of dark matter. At Fermilab, we have two world-class underground facilities which are already being used to study this problem: NEXUS and QUIET. I will present on results from operating superconducting qubits in each of these facilities, and the potential implications towards utilizing qubits as sensors for a novel dark matter detector.

Baxter, Daniel [Texas U., Arlington]↗

Tensor networks, p -adic fields, and algebraic curves: arithmetic and the AdS 3 /CFT 2 correspondence

One of the many remarkable properties of conformal field theory in two dimensions is its connection to algebraic geometry. Since every compact Riemann surface is a projective algebraic curve, many constructions of interest in physics (which a priori depend on the analytic structure of the spacetime) can be formulated in purely algebraic language. This opens the door to interesting generalizations, obtained by taking another choice of field: for instance, the p-adics. Herein, we generalize the $\mathrm{AdS} / \mathrm{CFT}$ correspondence according to this principle; the result is a formulation of holography in which the bulk geometry is discrete—the Bruhat–Tits tree for $\mathrm{PGL} (2, \mathbb{Q}_p)$—but the group of bulk isometries nonetheless agrees with that of boundary conformal transformations and is not broken by discretization. We anticipate that this forms the natural geometric setting for tensor networks that have been proposed as models of bulk reconstruction via quantum error correcting codes; in certain cases, geodesics in the Bruhat–Tits tree reproduce those constructed using quantum error correction. Other aspects of holography also hold: Standard holographic results for massive free scalar fields in a fixed background carry over to the tree, whose vertical direction can be interpreted as a renormalization-group scale for modes in the boundary $\mathrm{CFT}$. Higher-genus bulk geometries (the $\mathrm{BTZ}$ black hole and its generalizations) can be understood straightforwardly in our setting, and the Ryu–Takayanagi formula for the entanglement entropy appears naturally

97 MATHEMATICS AND COMPUTING↗

Error control in the GCF: An information-theoretic model for error analysis and coding

The structure of data-transmission errors within the Ground Communications Facility is analyzed in order to provide error control (both forward error correction and feedback retransmission) for improved communication. Emphasis is placed on constructing a theoretical model of errors and obtaining from it all the relevant statistics for error control. No specific coding strategy is analyzed, but references to the significance of certain error pattern distributions, as predicted by the model, to error correction are made.

Adeyemi, O.↗

Accuracy enhancements for overset grids using a defect correction approach

A defect-correction approach is investigated as a means of enhancing the accuracy of flow computations on overset grids. Typically, overset-grid techniques process and pass information only at grid boundaries. In the current approach, error corrections at all overlapped interior points are injected between grids by using a defect-correction scheme. In some cases this is found to enhance the overall accuracy of the overset-grid method. Locally refined overset grids can be used to provide an efficient solution-adaptation method. The defect correction can also be ultilized as an error-correction technique for a coarse grid by evaluating the residual using a fine base grid, but solving the implicit equations only on the coarse grid. Numerical examples include an accuracy and dissipation study of an unsteady decaying vortex flow, the flow over a NACA 0012 airfoil, and the flow over a mulit-element high-lift airfoil.

Rogers, Stuart E.↗

Entanglement phases in large- N hybrid Brownian circuits with long-range couplings

Here, we develop solvable models of large-N hybrid quantum circuits on qubits and fermions with tunable long-range power-law interactions and continuous local monitoring. These models provide analytical access to the entanglement phase diagram and error-correcting properties of many-body entangled nonequilibrium states generated by such dynamics. In one dimension, the long-range couplings are irrelevant for α > 3/2, where α is the power-law exponent, and the models exhibit a conventional measurement-induced phase transition between volume- and area-law entangled phases. For 1/2 < α < 3/2, the long-range couplings become relevant, leading to a nontrivial dynamical exponent at the measurement-induced phase transition. More interestingly, for α < 1, the entanglement pattern receives a subvolume correction for both area-law and volume-law phases, indicating that the phase realizes a quantum error correcting code whose code distance scales as L 2–2α . While the entanglement phase diagram is the same for both the interacting qubit and fermionic hybrid Brownian circuits, we find that long-range free-fermionic circuits exhibit a distinct phase diagram with two different fractal entangled phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical galaxy cluster detection across a wide redshift range

The past decade is one of the most exciting period in the history of physics and astronomy. The discovery of cosmic acceleration dramatically changed our understanding about the evolution and constituents of the Universe. To accommodate the new acceleration phase into our well established Big Bang cosmological scenario under the frame work of General Relativity, there must exist a very special substance that has negative pressure and make up about 73% of the total energy density in our Universe. It is called Dark Energy. For the first time people realized that the vast majority of our Universe is made of things that are totally different from the things we are made of. Therefore, one of the major endeavors in physics and astronomy in the coming years is trying to understand, if we can, the nature of dark energy. Understanding dark energy cannot be achieved from pure logic. We need empirical evidence to finally determine about what is dark energy. The better we can constrain the energy density and evolution of the dark energy, the closer we will get to the answer. There are many ways to constrain the energy density and evolution of dark energy, each of which leads to degeneracy in certain directions in the parameter space. Therefore, a combination of complimentary methods will help to reduce the degeneracies and give tighter constraints. Dark energy became dominate over matter in the Universe only very recently (at about z ~ 1.5) and will affect both the cosmological geometry and large scale structure formation. Among the various experiments, some of them constrain the dark energy mainly via geometry (such as CMB, Supernovae) while some others provides constraints from both structures and geometry (such as BAO, Galaxy Clusters) Galaxy clusters can be used as a sensitive probe for cosmology. A large cluster catalog that extends to high redshift with well measured masses is indispensable for precisely constraining cosmological parameters. Detecting clusters in optical bands is very efficient. Multi-color CCD photometry allows combined detection and redshift estimation for clusters across broad redshift ranges. However, the lack of precise information about galaxy positions along the line of sight leads to contamination by projection, which plagues both cluster detection and the measurement of their properties. The dominance of red sequence galaxies, tightly clustered along the E/S0 ridgeline, provides a powerful method for de-projecting field galaxies. We developed an Error Corrected Gaussian Mixture Model to fit the galaxies color distribution around clusters by taking into account the measurement errors. By this technique, we can detect the red sequence color clustering and extract unbiased information about the evolution of the red sequence ridgeline and its width. Precision measurements of ridgelines yields better estimates of cluster richness and possibly their dynamical state, leading to better estimates of cluster mass. By using the red sequence clustering in color space identified from the Error Corrected Gaussian Mixture Model, together with the projected NFW filter in the projected RA/DEC plane, we developed a new and efficient cluster finding algorithm that can reliably detect galaxy clusters across the redshift range from 0.1 to 1.4. We have also run the cluster finder on legacy SDSS DR7 data and assembled an approximately volume limited cluster catalog across redshifts from 0.1 to 0.5. The algorithm has been tested against a Monte Carlo mock catalog, showing the identified clusters are highly complete and pure. With the completion of this thesis, we build the first and essential step towards precision cluster cosmology. Meanwhile, the large optical cluster catalog across a wide redshift range makes possible the systematic and detailed investigation of cluster formation and evolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Space Telescope SI C&DH system

The Hubble Space Telescope Scientific Instrument Control and Data Handling Subsystem (SI C&DH) is designed to interface with five scientific instruments of the Space Telescope to provide ground and autonomous control and collect health and status information using the Standard Telemetry and Command Components (STACC) multiplex data bus. It also formats high throughput science data into packets. The packetized data is interleaved and Reed-Solomon encoded for error correction and Pseudo Random encoded. An inner convolutional coding with the outer Reed-Solomon coding provides excellent error correction capability. The subsystem is designed with the capacity for orbital replacement in order to meet a mission life of fifteen years. The spacecraft computer and the SI C&DH computer coordinate the activities of the spacecraft and the scientific instruments to achieve the mission objectives.

Gadwal, Govind R.↗