Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Atomic Oxygen Recombination at Surface Defects on Reconstructed (0001) α-Quartz Exposed to Atomic and Molecular Oxygen

The surface chemistry of silica is strongly affected by the nature of chemically active sites (or defects) occurring on the surface. Here, we employ quantum mechanical electronic structure calculations to study an uncoordinated silicon defect, a non-bridging oxygen defect, and a peroxyl defect on the reconstructed (0001) surface of α-quartz. We characterized the spin states and energies of the defects, and calculated the reaction profiles for atomic oxygen recombination at the defects. We elucidated the diradical character by analyzing the low-lying excited states using multireference wave function methods. We show that the diradical defects consist of weakly coupled doublet radicals, and the atomic oxygen recombination can take place through a barrierless process at defects. We have delineated the recombination mechanism and computed the formation energy of the peroxyl and non-bridging oxygen defects. We found that key recombination reaction paths are barrierless. In addition, we characterize the electronically excited states that may play a role in the chemical and physical processes that occur during recombination on these surface defect sites.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2019

Photoluminescence Intensity Fluctuations and Temperature-Dependent Decay Dynamics of Individual Carbon Nanotube sp 3 Defects

Recent demonstration of room temperature, telecommunication wavelength single photon generation by sp 3 defects of single wall carbon nanotubes established these defects as a new class of quantum materials. However, their practical utilization in development of quantum light sources calls for a significant improvement in their imperfect quantum yield (QY~10–30%). PL intensity fluctuations observed with some defects also need to be eliminated. Aiming toward attaining fundamental understanding necessary for addressing these critical issues, we investigate PL intensity fluctuation and PL decay dynamics of aryl sp 3 defects of (6,5), (7,5), and (10,3) single wall carbon nanotubes (SWCNTs) at temperatures ranging from 300 to 4 K. By correlating defect-state PL intensity fluctuations with change (or lack of change) in PL decay dynamics, we identified random variations in the trapping efficiency of E 11 band-edge excitons (likely resulting from the existence of a fluctuating potential barrier in the vicinity of the defect) as the mechanism mainly responsible for the defect PL intensity fluctuations. Furthermore, by analyzing the temperature dependence of PL intensity and decay dynamics of individual defects based on a kinetic model involving the trapping and detrapping of excitons by optically allowed and forbidden (bright and dark) defect states, we estimate the height of the potential barrier to be in the 3–22 meV range. Our analysis also provides further confirmation of recent DFT simulation results that the emissive sp 3 defect state is accompanied by an energetically higher-lying optically forbidden (dark) exciton state.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Impact of pre-existing disorder on radiation defect dynamics in Si

The effect of pre-existing lattice defects on radiation defect dynamics in solids remains unexplored. Here, we use a pulsed beam method to measure the time constant of defect relaxation for 500 keV Ar ion bombardment of Si at 100 °C with the following two representative types of pre- existing lattice disorder: (i) point defect clusters and (ii) so-called “clamshell” defects consisting of a high density of dislocations. Results show that point defect clusters slow down defect relaxation processes, while regions with dislocations exhibit faster defect interaction dynamics. These experimental observations demonstrate that the dynamic aspects of damage buildup, attributed to defect trapping-detrapping processes, can be controlled by defect engineering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

Interaction of Sn atoms with defects introduced by ion implantation in Ge substrate

The interaction of Sn atoms with defects induced by Sn implantation of Ge substrates with antimony (Sb) as an n-type dopant and the impact of H{sub 2} annealing on these defects were investigated by comparison with defects induced by Ge self-implantation. In the Ge samples implanted with either Sn or Ge, and annealed at temperatures of less than 200 °C, divacancies, Sb-vacancy complexes with single or double acceptor-like states, and defects related to Sb and interstitial Ge atoms were present. On the other hand, after annealing at 500 °C in an N{sub 2} or H{sub 2} atmosphere, defects with different structures were observed in the Sn-implanted samples by deep level transition spectroscopy. The energy levels of the defects were 0.33 eV from the conduction band minimum and 0.55 eV from the valence band maximum. From the capacitance-voltage (C-V) characteristics, interaction between Sn atoms and defects after annealing at 500 °C was observed. The effect of H{sub 2} annealing at around 200 °C was observed in the C-V characteristics, which can be attributed to hydrogen passivation, and this effect was observed in both the Ge- and Sn-implanted samples. These results suggest the presence of defects that interact with Sn or hydrogen atoms. This indicates the possibility of defect control in Ge substrates by Sn or hydrogen incorporation. Such defect control could yield high-performance Ge-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Carrier providers or killers: The case of Cu defects in CdTe

Defects play important roles in semiconductors for optoelectronic applications. Common intuition is that defects with shallow levels act as carrier providers and defects with deep levels are carrier killers. Here, taking the Cu defects in CdTe as an example, we show that relatively shallow defects can play both roles. Using first-principles calculation methods combined with thermodynamic simulations, we study the dialectic effects of Cu-related defects on hole density and lifetime in bulk CdTe. Because CuCd can form a relatively shallow acceptor, we find that increased Cu incorporation into CdTe indeed can help achieve high hole density; however, too much Cu can cause significant non-radiative recombination. We discuss strategies to balance the contradictory effects of Cu defects based on the calculated impact of Cd chemical potential, copper defect concentrations, and annealing temperature on lifetime and hole density. Lastly, these findings advance the understanding of the potential complex defect behaviors of relatively shallow defect states in semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Tuning spin–orbit coupling in (6,5) single-walled carbon nanotube doped with sp 3 defects

Single-walled carbon nanotubes (SWCNTs) containing sp 3 defects are a promising class of optoelectronic materials with bright photoluminescence and demonstrated single-photon emission. Using density functional theory simulations, complemented by measurements, we investigate the electronic structure of a series of quantum defects attached to (6,5) SWCNT with the goal of tuning the spin–orbit coupling by introduction of a heavy atom in the defect structure. We characterize the ground state electronic and spin properties of four synthesized and three potential defects on the tube and find that all of the synthesized defects considered introduce a localized midgap defect-centered state containing a single electron, ≈0.2–0.3 eV above the valence band. The spin density is located at the sp 3 defect site with negligible spin–orbit coupling even with the presence of a Pd atom. Three additional functional groups were tested via computation to increase spin localization near the metal, thereby increasing spin–orbit coupling. We predict that only the chlorodiphosphanepalladium(II)– [Cl(PH 3 ) 2 Pd(II)–] defect results in increased spin–orbit splitting of the defect state and the conduction band associated with the pristine-like SWCNT, a measure of the spin–orbit coupling of excited state transitions. This study suggests that for unpassivated sp 3 defects in (6,5) SWCNT, forming a direct bond between a heavy atom and the sp 3 carbon allows for tuning of spin–orbit coupling.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Using ground state and excited state density functional theory to decipher 3d dopant defects in GaN

Abstract Using ground state density functional theory (DFT) and implementing an occupation-constrained DFT (occ-DFT) for self-consistent excited state calculations, we decipher the electronic structure of the Mn dopant and other 3 d defects in GaN across the band gap. Our analysis, validated with broad agreement with defect levels (ground-state calculations) and photoluminescence data (excited-state calculations), mandates reinterpretation and reassignment of 3 d defect data in GaN. The Mn Ga defect is determined to span stable charge states from (1−) in n -type GaN through (2+) in p -type GaN. The Mn(2+) is predicted to be a d 2 ground state spin triplet defect with a singlet excited state, isoelectronic with the defect associated with the 1.19 eV photoluminescence in n -type GaN. The combined analysis of defect levels and excited states invites reassessment of all d 2 -capable dopants in GaN. We demonstrate that the 1.19 eV defect, a candidate defect for optically controlled quantum applications, cannot be the Cr(1+) assumed in literature and instead must be the V(0). The combined ground-state/excited-state DFT analysis is shown to be able to chemically fingerprint defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Midgap state requirements for optically active quantum defects

Abstract Optically active quantum defects play an important role in quantum sensing, computing and communication. The electronic structure and the single-particle energy levels of these quantum defects in the semiconducting host have been used to understand their optoelectronic properties. Optical excitations that are central for their initialization and readout are linked to transitions between occupied and unoccupied single-particle states. It is commonly assumed that only quantum defects introducing levels well within the band gap and far from the band edges are of interest for quantum technologies as they mimic an isolated atom embedded in the host. In this perspective, we contradict this common assumption and show that optically active defects with energy levels close to the band edges can display similar properties. We highlight quantum defects that are excited through transitions to or from a band-like level (bound exciton) such as the T center and Se S i + in silicon. We also present how defects such as the silicon split-vacancy in diamond can involve transitions between localized levels that are above the conduction band or below the valence band. Loosening the commonly assumed requirement on the electronic structure of quantum defects offers opportunities in quantum defects design and discovery especially in smaller band gap hosts such as silicon. We discuss the challenges in terms of operating temperature for photoluminescence or radiative lifetime in this regime. We also highlight how these alternative type of defects bring their own needs in terms of theoretical developments and fundamental understanding. This perspective clarifies the electronic structure requirement for quantum defects and will facilitate the identification and design of new color centers for quantum applications especially driven by first principles computations.

Xiong, Yihuang (ORCID:0000000178096047)↗
DOE OSTI2024

Defect Thermodynamics and Transport Properties of Perovskite and Fluorite Materials for Solid-Oxide and Proton Conducting Oxide Cells Evaluated Based on Density Functional Theory Modeling

Density functional theory based defect thermodynamic modeling was performed to determine the effect of humidity and H2/O2 gas pressure on various defect chemistry and transport properties of perovskite and fluorite oxides for solid-oxide and proton-conducting-oxide cell applications, with inclusion of the electronic-conducting oxides (as electrodes) and insulating oxides (as electrolytes). Automatic defect generation workflow and first-principles charged defect analysis were implemented on NETL Joule supercomputer for modeling defect equilibria and transport properties of insulating oxides as electrolytes in SOCs and proton-conducting ceramic cells. A GNU Octave defect model subroutines were developed to facilitate defect modeling of electronic conducting oxides in a wide range of operating conditions guided by modeling and experiments. The model includes the hydride defect formation reaction under reducing conditions and allows to incorporate nonstoichiometry effects on the defect thermodynamic parameters. The developed model serves as a platform to facilitate fundamental understanding of the defect thermodynamics in SOC oxide materials and can be used as a novel tool in computational materials screening for SOC and other energy applications.

Lee, Yueh-Lin↗
DOE OSTI2024

Optical Properties of Low‐Defect Large‐Area Hexagonal Boron Nitride for Quantum Applications

Intrinsic defects and their concentrations in hexagonal boron nitride (h-BN) play a key role in single-photon emission. In this study, the optical properties of large-area multilayer h-BN-on-sapphire grown by metal-organic chemical vapor deposition are explored. Based on the detailed spectroscopic characterization using both cathodoluminescence (CL) and photoluminescence (PL) measurements, the material is devoid of random single-point defects instead of a few clustered complex defects. The emission spectra of the measurements confirm a record-low-defect concentration of ≈10 4 cm −2 . Post-annealing, no significant changes are observed in the measured spectra and the defect concentrations remain unaltered. Through CL and PL spectroscopy, an optically active boron vacancy spin defect is identified and a novel complex defect combination arising from carbon impurities is revealed. This complex defect, previously unreported, signifies a unique aspect of the material. In these findings, the understanding of defect-induced optical properties in h-BN films is contributed, providing insights for potential applications in quantum information science.

42 ENGINEERING↗
DOE OSTI2026

Charged Defects in UO 2 Bulk and Surface: A First-Principles Study

Uranium dioxide (UO 2 ) is the primary fuel used in nuclear reactors. Under the extreme heat and radiation inside a reactor, this material inevitably develops defects in its crystal structure. To investigate the nature and behavior of these defects, DFT+U calculations were employed to investigate charged point defects in both bulk UO 2 and its most stable surface, the (111) plane. The formation of defects and their impact on the electronic structure were systematically examined. The results reveal that these defects introduce localized electronic states, alter magnetic behavior, and modify the structural properties. In general, such defects act as deep traps capable of capturing and retaining charge carriers. The stability of these defects depends strongly on the chemical environment and the position of the Fermi level. Surface defect calculations reveal that oxygen vacancies form more readily at the surface than in the bulk over a wide range of electron chemical potential, with subsurface oxygen vacancies being more stable than those in the top layer. Overall, the findings demonstrate how charged defects influence magnetism, transport, and stability in UO 2 , providing insights that may guide improvements in the safety and efficiency of nuclear fuel.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Identifying native point defect configurations in α-alumina

Intimately intertwined atomic and electronic structures of point defects govern diffusion-limited corrosion and underpin the operation of optoelectronic devices. For some materials, complex energy landscapes containing metastable defect configurations challenge first-principles modeling efforts. Here, we thoroughly reevaluate native point defect geometries for the illustrative case of α-Al 2 O 3 by comparing three methods for sampling candidate geometries in density functional theory calculations: displacing atoms near a naively placed defect, initializing interstitials at high-symmetry points of a Voronoi decomposition, and Bayesian optimization. We find symmetry-breaking distortions for oxygen vacancies in some charge states, and we identify several distinct oxygen split-interstitial geometries that help explain literature discrepancies involving this defect. We also report a surprising and, to our knowledge, previously unknown trigonal geometry favored by aluminum interstitials in some charge states. Importantly, these new configurations may have transformative impacts on our understanding of defect migration pathways in aluminum-oxide scales protecting metal alloys from corrosion. Overall, the Voronoi scheme appears most effective for sampling candidate interstitial sites because it always succeeded in finding the lowest-energy geometry identified in this study, although no approach found every metastable configuration. Finally, we show that the position of defect levels within the band gap can depend strongly on the defect geometry, underscoring the need to conduct careful searches for ground-state geometries in defect calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Defect Engineering in Large‐Scale CVD‐Grown Hexagonal Boron Nitride: Formation, Spectroscopy, and Spin Relaxation Dynamics

Recently, numerous techniques have been reported for generating optically active defects in exfoliated hexagonal boron nitride (hBN), which hold transformative potential for quantum photonic devices. However, achieving on-demand generation of desirable defect types in scalable hBN films remains a significant challenge. Here, it is demonstrated that formation of negative boron vacancy defects, V B − , in suspended, large-area CVD-grown hBN is strongly dependent on the type of bombarding particles (ions, neutrons, and electrons) and irradiation conditions. In contrast to suspended hBN, defect formation in substrate-supported hBN is more complex due to the uncontrollable generation of secondary particles from the substrate, and the outcome strongly depends on the thickness of the hBN. Different defect types are identified by correlating spectroscopic and optically detected magnetic resonance features, distinguishing boron vacancies (formed by light ions and neutrons and emitting at 800 nm) from other optically active defects emitting at 650 nm assigned to anti-site nitrogen vacancy (N B V N ) and reveal the presence of additional “dark” paramagnetic defects that influence spin-lattice relaxation time (T 1 ) and zero-field splitting parameters, all of which strongly depend on the defect density. These results underscore the potential for precisely engineered defect formation in large-scale CVD-grown hBN, paving the way for the scalable fabrication of quantum photonic devices.

CVD↗
DOE OSTI2015

Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

Wrought magnesium alloys for demanding structural applications require high quality defect free cast feedstock. The aim of this study was to first identify and characterise typical defects in direct chill cast magnesium–aluminium–zinc (AZ) alloy billet and then use modelling to understand the origins of these defects so they can be prevented. Defects were first located using ultrasonic inspection and were then characterised using X-ray computed tomography (XCT) and serial sectioning, establishing the presence of oxide films and intermetallic particles Al{sub 8}Mn{sub 5} in all defects. A model was developed to predict the flow patterns and growth kinetics of the intermetallic phases during casting, which influence the formation of defects. Simulation of the growth of the intermetallic particles demonstrated that precipitation from the liquid occurs in the mould. The combination of the entrained oxide films and intermetallic particles recirculates in the liquid metal and continues to grow, until large enough to settle, which is predicted to occur at the centre of the mould where the flow is the slowest. Based on these predictions, strategies to reduce the susceptibility to defect formation are suggested. - Highlights: • Casting defects in magnesium direct chill casting have been imaged and characterised in 3-dimensions. • The occurrences of co-located clusters of particles and oxide films have been characterised and explained. • A coupled model has been developed to help interpret the observed trend for defects located towards the centre of billets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Automated defect identification in electroluminescence images of solar modules

Solar photovoltaic (PV) modules are susceptible to manufacturing defects, mishandling problems or extreme weather events that can limit energy production or cause early device failure. Trained professionals use electroluminescence (EL) images to identify defects in modules, however, field surveys or inline image acquisition can generate millions of EL images, which are infeasible to analyze by rote inspection. Here, we develop a rapid automatic computer vision pipeline (~0.5 seconds/module) to analyze EL images and identify defects including cracks, intra-cell defects, oxygen-induced defects, and solder disconnections. Defect identification is achieved with a machine learning model (Random Forest, ResNet models and YOLO) trained on 762 manually-labeled EL images of PV modules. We compare model performance on an imbalanced real-world validation set containing 134 EL images and determine that ResNet18 and YOLO are the optimal models; we next evaluated these models on a dedicated testing set (129 module images) with resulting macro F1 scores of 0.83 (ResNet18) and 0.78 (YOLO). Using a field EL survey of a PV power plant damaged in a vegetation fire, we analyze 18,954 EL images (2.4 million cells) and inspect the spatial distribution of defects on the solar modules. The results find increased frequency of ‘crack’, ‘solder’ and ‘intra-cell’ defects on the edges of the solar module closest to the ground after fire. We also find an abnormal increase of striation rings on cells which were assumed to be caused mainly in fabrication process. Our methods are published as open-source software. It can also be used to identify other kinds of defects or process different types of solar cells with minor modification on models by transfer learning.

14 SOLAR ENERGY↗
DOE OSTI2023

Understanding the origin of Tabula Rasa-induced defects in n-type Cz c-Si: The case of nitrogen atmosphere

Phosphorus-doped Czochralski-grown silicon (Cz-Si) has been gaining market share in the large-scale manufacturing of high-efficiency silicon (Si)-based photovoltaic (PV) devices thanks to higher carrier lifetimes than their boron-doped counterpart. However, the fabrication of n-type Cz-Si based solar cells often requires process steps with much higher temperatures and longer times than p-type Silicon. Defect interaction with the high temperatures during such processes tend to be detrimental to the n-type Cz-Si carrier lifetime, therefore limiting the final device efficiency. Short thermal anneals before cell processing, known as Tabula Rasa (TR), have been proposed to mitigate the thermally induced lifetime degradation during n-type Cz-Si solar cell fabrication. This work thoroughly investigates the defects responsible for the lifetime degradation after TR in a N 2 atmosphere treatment. We use temperature-injection-dependent lifetime spectroscopy and the thickness variation method to decouple the effects of TR treatment in the bulk and the surface of the n-type Cz-Si wafers. Using the defect parameter contour mapping (DPCM), we identify the defect energy level (E t ) and the capture cross-section ratio (k) of the most likely process-induced defect, which aligns with previously proposed Si vacancy-associated defects. The DPCM reveals that these vacancy-associated defects have a shallow energy level E t - E v ~0.13 eV and very efficient electron capture cross section k~600. Unexpectedly, the bulk degradation due to vacancy defects in the volume of the wafer, is accompanied by a significant increase in the surface recombination as well. Through evaluating the surface recombination velocity temperature- and injection dependence, we show that after TR, at room temperature and for an injection level of 10 15 cm -3 , in a wafer passivated with a-Si:H(i) the surface recombination dominates the overall lifetime response. Here we hypothesize that the near surface vacancy-associated bulk defects play a role in lowering the electron diffusion current into the a-Si:H(i) from the c-Si(n) reducing the field-effect passivation.

14 SOLAR ENERGY↗
DOE OSTI2019

Propagation of Degradation-Induced Defects in Zeolitic Imidazolate Frameworks

Isolated defects induced by water and acid gases have been extensively characterized in ZIF-8, a prototypical metal–organic framework material, yet there is little understanding regarding how these single bond-breaking events lead to the structural amorphization observed after prolonged experimental exposure in acidic environments. We use density functional theory calculations to provide the first analysis of defect propagation in a zeolitic imidazolate framework (ZIF) material. Given a single bond-breaking event (the first step in the formation of any defect state), we exhaustively explore the energetics of subsequent defect states and find strong preference for additional bond-breaking located adjacent to the previous defect in both two-defect and three-defect systems. This series of favorable reaction energies is more exothermic when we replace water with sulfuric acid as a protonating agent, in agreement with experimental observations that ZIF-8 degradation is accelerated in humid acid gas environments. To offer initial insights into experimental signatures of defect propagation, we compare the simulated powder pattern in structures at varying levels of defect concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantifying the Influence of Defects on Selectivity of Electrodes Encapsulated by Nanoscopic Silicon Oxide Overlayers

Encapsulation of electrocatalysts and photocatalysts with semipermeable nanoscopic oxide overlayers that exhibit selective transport properties is an attractive approach to achieve high redox selectivity. However, defects within the overlayers-such as pinholes, cracks, or particle inclusions-may facilitate local high rates of parasitic reactions by creating pathways for facile transport of undesired reactants to exposed active sites. Scanning electrochemical microscopy (SECM) is an attractive method to determine the influence of defects on macroscopic performance metrics thanks to its ability to measure the relative rates of competing electrochemical reactions with high spatial resolution over the electrode. Here, we report the use of SECM to determine the influence of overlayer defects on the selectivity of silicon oxide (SiOx) encapsulated platinum thin-film electrocatalysts operated under conditions where two competing reactions-the hydrogen evolution and Fe(III) reduction reactions-can occur. After an SECM methodology is described to determine spatially resolved selectivity, representative selectivity maps are correlated with the location of defects that are characterized by optical, electron, and atomic force microscopies. This analysis reveals that certain types of defects in the oxide overlayer are responsible for ∼60-90% of the partial current density toward the undesired Fe(III) reduction reaction. By correcting for defect contributions to Fe(III) reduction rates, true Fe(III) permeability values for the SiOxoverlayers were determined to be over an order of magnitude lower than permeabilities determined from analyses that ignore the presence of defects. Lastly, different types of defects were studied revealing that defect morphology can have varying influence on both redox selectivity and calculated permeability. This work highlights the need for spatially resolved measurements to evaluate the performance of oxide-encapsulated catalysts and understand their performance limits.

25 ENERGY STORAGE↗