Rhenium Biscorrole Sandwich Compounds: XAS Evidence for a New Coordination Motif
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Engineering Papers
Results for “coordination chemistry”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Analyzing Stabilities of Metal–Organic Frameworks: Correlation of Stability with Node Coordination to Linkers and Degree of Node Metal Hydrolysis
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Alkyl Coordination in meso -(ONO) 2– Supported Uranium(IV) Complexes
Not Available
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Electrochemical Oxidation and Speciation of Lanthanides in Potassium Carbonate Solution
Increasing lanthanide demand to support clean energy goals drives the need to develop more efficient approaches to separate adjacent lanthanides. Most approaches for lanthanide separations are not very selective and are based on small differences in lanthanide ionic radii. Concentrated potassium carbonate media has shown some potential to enable oxidation of praseodymium (Pr) and terbium (Tb) to their tetravalent states, which could ultimately enable a separation based on differences in oxidation states, but very little is known regarding the system's chemistry. This work completes a detailed examination of cerium (Ce) redox chemistry in concentrated carbonate media to support the development of Pr and Tb oxidation studies. The half-wave potential (E 1/2 ) of the Ce(III)/(IV) redox couple is evaluated under various solution conditions and computational modeling of carbonate coordination environments is discussed. Cyclic voltammetry shows higher carbonate concentrations and temperatures can lower the potential required to oxidize Ce(III) by 54 mV (3.5 to 5.5 M) and 39 mV (from 10 °C to 70 °C). Chronoabsorptometry shows Ce(III) and Ce(IV) carbonate complexes are chemically stable and reversible. Computational modelling suggests the most likely coordination environment for the Ce(IV) complex is Ce(CO 3 ) 4 (OH) 5– which is less entropically favorable than the lowest energy Ce(III) complex, Ce(CO 3 ) 4 5– .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Chemical Vapor Deposition for Atomically Dispersed and Nitrogen Coordinated Single Metal Site Catalysts
Abstract Atomically dispersed and nitrogen coordinated single metal sites (M‐N‐C, M=Fe, Co, Ni, Mn) are the popular platinum group‐metal (PGM)‐free catalysts for many electrochemical reactions. Traditional wet‐chemistry catalyst synthesis often requires complex procedures with unsatisfied reproducibility and scalability. Here, we report a facile chemical vapor deposition (CVD) strategy to synthesize the promising M‐N‐C catalysts. The deposition of gaseous 2‐methylimidazole onto M‐doped ZnO substrates, followed by an in situ thermal activation, effectively generated single metal sites well dispersed into porous carbon. In particular, an optimal CVD‐derived Fe‐N‐C catalyst exclusively contains atomically dispersed FeN 4 sites with increased Fe loading relative to other catalysts from wet‐chemistry synthesis. The catalyst exhibited outstanding oxygen‐reduction activity in acidic electrolytes, which was further studied in proton‐exchange membrane fuel cells with encouraging performance.
Liu, Shengwen↗
Spherical trihedral metallo-borospherenes
The discovery of borospherenes unveiled the capacity of boron to form fullerene-like cage structures. While fullerenes are known to entrap metal atoms to form endohedral metallofullerenes, few metal atoms have been observed to be part of the fullerene cages. Here we report the observation of a class of remarkable metallo-borospherenes, where metal atoms are integral parts of the cage surface. We have produced La 3 B 18 - and Tb 3 B 18 - and probed their structures and bonding using photoelectron spectroscopy and theoretical calculations. Global minimum searches revealed that the most stable structures of Ln 3 B 18 - are hollow cages with D 3h symmetry. The B 18 -framework in the Ln 3 B 18 - cages can be viewed as consisting of two triangular B6 motifs connected by three B 2 units, forming three shared B 10 rings which are coordinated to the three Ln atoms on the cage surface. These metallo-borospherenes represent a new class of unusual geometry that has not been observed in chemistry heretofore.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Surface hopping molecular dynamics simulation of ultrafast methyl iodide photodissociation mapped by Coulomb explosion imaging
Our simulation demonstrates the robustness of the Coulomb explosion imaging technique in studying methyl iodide photodissociation, and shows that it can be effectively used for imaging non-adiabatic transitions in coordinate space.
Ding, Yijue↗
The iron oxidation state of Ryugu samples
The Hayabusa2 mission sampled Ryugu, an asteroid that did not suffer extensive thermal metamorphism, and returned rocks to the Earth with no significant air exposure. It therefore offers a unique opportunity to study the redox state of carbonaceous Cb-type asteroids and evaluate the overall redox state of the most primitive rocks of the solar system. An analytical framework was developed to investigate the iron mineralogy and valence state in extraterrestrial material at the micron scale by combining x-ray diffraction, conventional Mössbauer (MS), and nuclear forward scattering (NFS) spectroscopies. An array of standard minerals was analyzed and cross-calibrated between MS and NFS. Then, MS and NFS spectra on three Ryugu grains were collected at the bulk and the micron scales. In Ryugu samples, iron is essentially accommodated in magnetite, clay minerals (serpentine–smectite), and sulfides. Only a single set of Mössbauer parameters was necessary to account for the entire variability observed in MS and NFS spectra, at all spatial scales investigated. These parameters therefore make up a fully consistent iron mineralogical model for the Ryugu samples. As far as MS and NFS spectroscopies are concerned, Ryugu grains are overall similar to each other and share most of their mineralogical features with CI-type chondrites. In detail however, no ferrihydrite is found in Ryugu particles even at the very sensitive scale of Mössbauer spectroscopy. The typical Fe 3+ /Fe tot of clay minerals is much lower than typical redox ratios measured in CI chondrites (Fe 3+ /Fe tot = 85%–90%). Furthermore, magnetite from Ryugu is stoichiometric with no significant maghemite component, whereas up to 12% of maghemite was previously identified in the Orgueil's so-called magnetite. These differences suggest that most CI meteorites suffered terrestrial alteration and that the preterrestrial composition of these carbon-rich samples was less oxidized than previously measured. However, it is not clear yet whether or not the parent bodies of CI chondrites were as reduced as Ryugu. Finally, the high spatial resolution of NFS allows to disentangle the redox state and the crystal chemistry of iron accommodated in serpentine and smectite. The most likely polytype of serpentine is lizardite, containing <35% of Fe 3+ , a fraction of which being tetrahedrally coordinated. Smectite is more oxidized (Fe 3+ /Fe tot > 65%) and mainly contains octahedral ferric iron. In conclusion, this finding implies that these clays formed from highly alkaline fluids and the spatial variability highlighted here may suggest a temporal evolution or a spatial variability of the nature of this fluid.
58 GEOSCIENCES↗
Actinides in complex reactive media: A combined ab initio molecular dynamics and machine learning analytics study of transuranic ions in molten salts
The predominant ionic chemistry and the similarity in ionic radius of actinides make it very difficult to structurally distinguish them in liquids. In this work, while ab initio molecular dynamics shows that the f-states clearly affects the electronic properties, their impact on structural properties is not obvious. For the series of trivalent actinides U 3+ , Pu 3+ , Cm 3+ , Cf 3+ , Fm 3+ in molten NaCl and FLiBe, actinide ligand bonds have a higher degree of covalency in NaCl (than in FLiBe), and a higher degree of ionicity in FLiBe. Furthermore, a machine learned classification model can distinguish atomic environments of chemically similar actinides, as long as atoms beyond the first solvation shells are considered. Our work shows that only two types of descriptors are necessary to account for all the fluctuations in heavy metal/molten salt mixtures: The first descriptor represents the electronic state of the heavy metal, while the second encompasses the local coordination environment.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A model of stratospheric chemistry and transport on an isentropic surface
This paper presents a new photochemical transport model designed to simulate the behavior of stratospheric trace species in the middle stratosphere. The model has an Eulerian grid with the latitude and longitude coordinates on a single isentropic surface (hemispheric or global), in which both the dynamical and the photochemical processes can be accurately represented. The model is intgegrated for 12 days with winds and temperatures supplied by three-dimensional integration of an idealized wavenumber-one disturbance. The results for the long-lived tracers such as N2O showed excellent correlation with the potential vorticity distribution, validating the transport scheme. Calculations with zonally averaged wind and temperature fields showed that discrepancies in the calculation of the zonal mean were less than 10 percent for O3 and HNO3, compared with the zonal mean of the previous results.
Austin, John↗
An Efficient Copper-Based Redox Shuttle Bearing a Hexadentate Polypyridyl Ligand for DSCs under Low-Light Conditions
A Cu complex featuring a hexadentate ligand was synthesized and evaluated as a redox shuttle in dye-sensitized solar cell (DSC) devices, which exhibited excellent performance under low-light conditions. Cu-based redox shuttles (RSs) have been shown to perform remarkably well under low-light conditions; however, most of the known Cu-based RSs employ bidentate pyridyl ligands and often require bulky flanking groups adjacent to the nitrogen donors of these ligands to prevent distortion and binding of exogenous Lewis bases such as 4- tert -butylpyridine (TBP) that are added to enhance cell performance. Without the bulky substituents, the bidentate ligands are susceptible to ligand exchange with TBP. In this context, we have developed a Cu-based RS with a preorganized multidentate ligand designed to facilitate efficient electron transfer kinetics and high stability via the chelate effect. The Cu system, [Cu(bpyPY4)] 2+/+ , reported here is supported by the hexadentate polypyridyl ligand bpyPY4 (6,6'-bis(1,1-di(pyridine-2-yl)ethyl)-2,2'-bipyridine) and examined as a RS in DSCs. From X-ray crystallography and variable-temperature 1 H NMR studies, bpyPY4 provides a dynamic coordination environment around the metal center. Cyclic voltammetry and UV–visible and NMR spectroscopy indicate that noncoordinated pyridyl donors block binding of TBP to copper. DSC devices using [Cu(bpyPY4)] 2+/+ as the redox electrolyte gave a power conversion efficiency (PCE) value of 4.9% under 1 sun illumination (100 mW/cm 2 ). Strikingly, the device performance increased to 11.11% when irradiated with 2400 lux (0.5 mW/cm 2 ) via a fluorescent lamp light source and improved further to 15.2% PCE at 13500 lux (2.10 mW/cm 2 ). In conclusion, the Cu redox shuttle is an intriguing candidate for implementation with narrow band gap sensitizers with low oxidation potentials, which are important for high photocurrent DSC devices.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
An analysis of aircrew procedural compliance
This research examines the relationships between aircrew compliance with procedures and operator errors. The data for this analysis were generated by reexamination of a 1976 experiment in full mission simulation conducted by Dr. H. P. Ruffell Smith (1979) for the NASA-Ames Research Center. The character of individual operators, the chemistry of crew composition, and complex aspects of the operational environment affected procedural compliance by crew members. Associations between enumerated operator errors and several objective indicators of crew coordination were investigated. The correspondence among high operator error counts and infrequent compliance with specific crew coordination requirements was most notable when copilots were accountable for control of flight parameters.
Schofield, J. E.↗
C-Term magnetic circular dichroism (MCD) spectroscopy in paramagnetic transition metal and f-element organometallic chemistry
Magnetic circular dichroism (MCD) spectroscopy is a powerful experiment used to probe the electronic structure and bonding in paramagnetic metal-based complexes. While C-term MCD spectroscopy has been utilized in many areas of chemistry, it has been underutilized in studying paramagnetic organometallic transition metal and f-element complexes. From the analysis of isolated organometallic complexes to the study of in situ generated species, MCD can provide information regarding ligand interactions, oxidation and spin state, and geometry and coordination environment of paramagnetic species. The pratical aspects of this technique, such as air-free sample preparation and cryogenic experimental temperatures, allow for the study of highly unstable species, something that is often difficult with other spectroscopic techniques. This perspective highlights MCD studies of both transition metal and f-element organometallic complexes, including in situ generated reactive intermediates, to demonstrate the utility of this technique in probing electronic structure, bonding and mechanism in paramagnetic organometallic chemistry.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Isoreticular Linker Substitution in Conductive Metal–Organic Frameworks with Through‐Space Transport Pathways
Abstract The extension of reticular chemistry concepts to electrically conductive three‐dimensional metal–organic frameworks (MOFs) has been challenging, particularly for cases in which strong interactions between electroactive linkers create the charge transport pathways. Here, we report the successful replacement of tetrathiafulvalene (TTF) with a nickel glyoximate core in a family of isostructural conductive MOFs with Mn 2+ , Zn 2+ , and Cd 2+ . Different coordination environments of the framework metals lead to variations in the linker stacking geometries and optical properties. Single‐crystal conductivity data are consistent with charge transport along the linker stacking direction, with conductivity values only slightly lower than those reported for the analogous TTF materials. These results serve as a case study demonstrating how reticular chemistry design principles can be extended to conductive frameworks with significant intermolecular contacts.
Xie, Lilia S.↗
Mechanochemical synthesis and structural analysis of trivalent lanthanide and uranium diphenylphosphinodiboranates
Phosphinodiboranates (H 3 BPR 2 BH 3 – ) are a class of borohydrides that have merited a reputation as weakly coordinating anions, which is attributed in part to the dearth of coordination complexes known with transition metals, lanthanides, and actinides. We recently reported how K(H 3 BP t Bu 2 BH 3 ) exhibits sluggish salt elimination reactivity with f-metal halides in organic solvents such as Et 2 O and THF. Here we report how this reactivity appears to be further attenuated in solution when the t Bu groups attached to phosphorus are exchanged for R = Ph or H, and we describe how mechanochemistry was used to overcome limited solution reactivity with K(H 3 BPPh 2 BH 3 ). Grinding three equivalents of K(H 3 BPPh 2 BH 3 ) with UI 3 (THF) 4 or LnI 3 (Ln = Ce, Pr, Nd) allowed homoleptic complexes with the empirical formulas U(H 3 BPPh 2 BH 3 ) 3 (1), Ce(H 3 BPPh 2 BH 3 ) 3 (2), Pr(H 3 BPPh 2 BH 3 ) 3 (3), and Nd(H 3 BPPh 2 BH 3 ) 3 (4) to be prepared and subsequently crystallized in good yields (50–80%). Single-crystal XRD studies revealed that all four complexes exist as dimers or coordination polymers in the solid-state, whereas 1 H and 11 B NMR spectra showed that they exist as a mixture of monomers and dimers in solution. Treating 4 with THF breaks up the dimer to yield the monomeric complex Nd(H 3 BPPh 2 BH 3 ) 3 (THF) 3 (4-THF). XRD studies revealed that 4-THF has one chelating and two dangling H 3 BPPh 2 BH 3 – ligands bound to the metal to accommodate binding of THF. In contrast to the results with K(H 3 BPPh 2 BH 3 ), attempting the same mechanochemical reactions with Na(H 3 BPH 2 BH 3 ) containing the simplest phosphinodiboranate were unsuccessful; only the partial metathesis product U(H 3 BPH 2 BH 3 )I 2 (THF) 3 (5) was isolated in poor yields. Here, despite these limitations, our results offer new examples showing how mechanochemistry can be used to rapidly synthesize molecular coordination complexes that are otherwise difficult to prepare using more traditional solution methods.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A supramolecular helicate with two independent Fe( ii ) switchable centres and a [Fe(anilate) 3 ] 3− guest
Encapsulation of a ferric tris-anilate complex engenders inequivalence of the two spin crossover Fe( ii ) centers of an otherwise symmetric coordination helical host.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗