Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordinate computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

An implicit flux-difference splitting scheme for three-dimensional, incompressible Navier-Stokes solutions to leading edge vortex flows

A new, implicit finite-difference scheme designed to solve the conservative, flux-difference split Navier-Stokes equations is used to compute incompressible vortex flows around delta wings. The completely vectorizable hybrid algorithm is constructed in delta form for steady state solutions independent of the time-step sizes. The scheme combines approximate factorization in crossflow planes with a symmetric planar Gauss-Seidel relaxation in the remaining spatial direction. The governing equations are solved in curvilinear, body-fitted coordinates for treating complex geometries. The computed flow field results are compared with other theoretical and experimental data.

Hartwich, P.-M.↗

Coordinated Optimization and Control of Residential Solid State Power Substations in Electrical Distribution Network

This paper proposes a computationally efficient mixed integer linear programming (MILP) model for the coordinated optimization of solid-state power substations (SSPSs) in a feeder considering the full unbalanced three-phase structure of the distribution grid and its characteristics. The proposed model determines the optimal real and reactive power of each SSPS at the point of common coupling (PCC) that minimizes the operating cost and maximizes the system performance, e.g., voltage regulation and phase balancing. To improve the computational efficiency, an inscribed octagon is introduced to approximate the quadratic capacity constraints of components. Numerical simulation results show the effectiveness of the proposed model and significant improvements in voltage profiles and power imbalance between phases.

Liu, Guodong↗

Computations of transonic flow over an oscillating airfoil with shock-induced separation

A numerical study is presented on unsteady transonic flow over an airfoil in pitching oscillation at a moderately high incidence. The study was focused on the effects of unsteady shock-wave/boundary-layer interactions and subsequent flow separations. An implicit finite-difference scheme was used to solve the full time-dependent compressible Navier-Stokes equations in conservation-law form. The algorithm adopted for this study is the Beam-Warming spatially factored scheme. It is, however, constructed in a body-fitted curvilinear coordinate system for efficient unsteady flow computations. The computational results are compared with experimental data measured in the Ames 11- by 11-Foot Transonic Wind Tunnel.

Chyu, W. J.↗

Improved instrumental magnitude prediction expected from version 2 of the NASA SKY2000 master star catalog

The SKY2000 Master Star Catalog (MC), Version 2 and its predecessors have been designed to provide the basic astronomical input data needed for satellite acquisition and attitude determination on NASA spacecraft. Stellar positions and proper motions are the primary MC data required for operations support followed closely by the stellar brightness observed in various standard astronomical passbands. The instrumental red-magnitude prediction subsystem (REDMAG) in the MMSCAT software package computes the expected instrumental color index (CI) [sensor color correction] from an observed astronomical stellar magnitude in the MC and the characteristics of the stellar spectrum, astronomical passband, and sensor sensitivity curve. The computation is more error prone the greater the mismatch of the sensor sensitivity curve characteristics and those of the observed astronomical passbands. This paper presents the preliminary performance analysis of a typical red-sensitive CCDST during acquisition of sensor data from the two Ball CT-601 ST's onboard the Rossi X-Ray Timing Explorer (RXTE). A comparison is made of relative star positions measured in the ST FOV coordinate system with the expected results computed from the recently released Tycho Catalogue. The comparison is repeated for a group of observed stars with nearby, bright neighbors in order to determine the tracker behavior in the presence of an interfering, near neighbor (NN). The results of this analysis will be used to help define a new photoelectric photometric instrumental sensor magnitude system (S) that is based on several thousand bright star magnitudes observed with the PXTE ST's. This new system will be implemented in Version 2 of the SKY2000 MC to provide improved predicted magnitudes in the mission run catalogs.

Sande, C. B.↗

Adapting Inspection Data for Computer Numerical Control

Machining time for repetitive tasks reduced. Program converts measurements of stub post locations by coordinate-measuring machine into form used by numerical-control computer. Work time thus reduced by 10 to 15 minutes for each post. Since there are 600 such posts on each injector, time saved per injector is 100 to 150 hours. With modifications this approach applicable to machining of many precise holes on large machine frames and similar objects.

Hutchison, E. E.↗

An advanced cockpit instrumentation system: The coordinated cockpit display

Cathode Ray Tube (CRT) and computer technologies are described in one approach to the replacement of flight instruments using three separate color CRT's. Each CRT display information pertinent to one of the three orthogonal projections of the aircraft flight situation. Three airline pilot's assessment of the display set is presented. Comments, rankings, and ratings show that the pilots accepted the concept of pictorial flight displays.

Baty, D. L.↗

INS3D: An incompressible Navier-Stokes code in generalized three-dimensional coordinates

The operation of the INS3D code, which computes steady-state solutions to the incompressible Navier-Stokes equations, is described. The flow solver utilizes a pseudocompressibility approach combined with an approximate factorization scheme. This manual describes key operating features to orient new users. This includes the organization of the code, description of the input parameters, description of each subroutine, and sample problems. Details for more extended operations, including possible code modifications, are given in the appendix.

Rogers, S. E.↗

Ameliorating the Courant-Friedrichs-Lewy condition in spherical coordinates: A double FFT filter method for general relativistic MHD in dynamical spacetimes

Numerical simulations of merging compact objects and their remnants form the theoretical foundation for gravitational wave and multimessenger astronomy. While Cartesian-coordinate-based adaptive mesh refinement is commonly used for simulations, spherical-like coordinates are more suitable for nearly spherical remnants and azimuthal flows due to lower numerical dissipation in the evolution of fluid angular momentum, as well as requiring fewer numbers of computational cells. However, the use of spherical coordinates to numerically solve hyperbolic partial differential equations can result in severe Courant-Friedrichs-Lewy (CFL) stability condition time step limitations, which can make simulations prohibitively expensive. This paper addresses this issue for the numerical solution of coupled spacetime and general relativistic magnetohydrodynamics evolutions by introducing a double fast Fourier transform (FFT) filter and implementing it within the fully message passing interface (mpi)-parallelized sphericalnr framework in the einstein toolkit. In conclusion, we demonstrate the effectiveness and robustness of the filtering algorithm by applying it to a number of challenging code tests, and show that it passes these tests effectively, demonstrating convergence while also increasing the time step significantly compared to unfiltered simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Rapid estimation of frequency response functions by close-range photogrammetry

The accuracy of a rapid method which estimates the frequency response function from stereoscopic dynamic data is computed. It is shown that reversal of the order of the operations of coordinate transformation and Fourier transformation, which provides a significant increase in computational speed, introduces error. A portion of the error, proportional to the perturbation components normal to the camera focal planes, cannot be eliminated. The remaining error may be eliminated by proper scaling of frequency data prior to coordinate transformation. Methods are developed for least squares estimation of the full 3x3 frequency response matrix for a three dimensional structure.

Tripp, J. S.↗

Binding, Release and Functionalization of Intact Pnictogen Tetrahedra Coordinated to Dicopper Complexes

The bridging MeCN ligand in the dicopper(I) complexes [(DPFN)Cu 2 (μ,η 1 : η 1 -MeCN)][X] 2 (X=weakly coordinating anion, NTf 2 (1 a), FAl[OC 6 F 10 (C 6 F 5 )] 3 (1 b), Al[OC(CF 3 ) 3 ] 4 (1 c)) was replaced by white phosphorus (P 4 ) or yellow arsenic (As 4 ) to yield [(DPFN)Cu 2 (μ,η 2 : η 2 -E 4 )][X] 2 (E=P (2 a-c), As (3 a-c)). The molecular structures in the solid state reveal novel coordination modes for E 4 tetrahedra bonded to coinage metal ions. Experimental data and quantum chemical computations provide information concerning perturbations to the bonding in coordinated E 4 tetrahedra. Reactions with N-heterocyclic carbenes (NHCs) led to replacement of the E 4 tetrahedra with release of P 4 or As 4 and formation of [(DPFN)Cu 2 (μ,η 1 : η 1 - Me NHC)][X] 2 (4 a,b) or to an opening of one E-E bond leading to an unusual E 4 butterfly structural motif in [(DPFN)Cu 2 (μ,η 1 : η 1 -E 4 Dipp NHC)][X] 2 (E=P (5 a,b), E=As (6)). With a cyclic alkyl amino carbene ( Et CAAC), cleavage of two As-As bonds was observed to give two isomers of [(DPFN)Cu 2 (μ,η 2 : η 2 -As 4 Et CAAC)][X] 2 (7 a,b) with an unusual As 4 -triangle+1 unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tests of a simple data merging algorithm for the GONG project

The GONG (Global Oscillation Network Group) project proposes to reduce the impact of diurnal variations on helioseismic measurements by making long-term observations of solar images from six sites placed around the globe. The sun will be observed nearly constantly for three years, resulting in the acquisition of l+ terabyte of image data. To use the solar network to maximum advantage, the images from the sites must be combined into a single time series to determine mode frequencies, amplitudes, and line widths. Initial versions of combined, i.e., merged, time series were made using a simple weighted average of data from different sites taken simultaneously. In order to accurately assess the impact of the data merge on the helioseismic measurements, a set of artificial solar disk images was made using a standard solar model and containing a well known set of oscillation modes and frequencies. This undegraded data set and data products computed from it were used to judge the relative merits of various data merging schemes. The artificial solar disk images were subjected to various instrumental and atmospheric degradations, dependent on site and time, in order to create a set of images simulating those likely to be taken at the site. The degraded artificial solar disk images for the six observing sites were combined in various ways to form merged time series of images and mode coefficients. Various forms of a weighted average were used, including an equally-weighted average, an average with weights dependent upon air mass and averages with weights dependent on various quality assurance parameters. Both the undegraded solar disk image time series and several time series made up of various combinations of the degraded solar disk images from the six sites were subjected to standard helioseismic measurement processing. This processing consisted of coordinate remapping, detrending, spherical harmonic transformation, computation of power series for the oscillation mode coefficients, and mode frequency identification. Visual and statistical evaluation of the merged data sets themselves and differences between the merged and undegraded data set shows good agreement between the two data sets. Some slight differences in image scale and registration appear between the undegraded data set and the various merged data sets. In the set of power series made from the mode coefficients of the merged data sets, some power leakage is observed into the background and into slightly lower l-value modes, especially at higher l-value mode frequencies. The results of the comparison of time series and mode oscillation frequencies of the undegraded data with those of the data merged using weighted averages indicate that, at least for p-mode solar oscillations, a weighted average of either the detrended remapped images or the mode coefficients gives good determination of the mode frequencies and adequate-to-good determination of the amplitudes and widths of the mode frequency lines. This conclusion is most advantageous to the analysis of the massive amounts of data to be received by the GONG network.

Williams, W. E.↗

Improved sonic-box computer program for calculating transonic aerodynamic loads on oscillating wings with thickness

A computer program was developed to account approximately for the effects of finite wing thickness in transonic potential flow over an oscillation wing of finite span. The program is based on the original sonic box computer program for planar wing which was extended to account for the effect of wing thickness. Computational efficiency and accuracy were improved and swept trailing edges were accounted for. Account for the nonuniform flow caused by finite thickness was made by application of the local linearization concept with appropriate coordinate transformation. A brief description of each computer routine and the applications of cubic spline and spline surface data fitting techniques used in the program are given, and the method of input was shown in detail. Sample calculations as well as a complete listing of the computer program listing are presented.

Ruo, S. Y.↗

Numerical Investigation of Hot Gas Ingestion by STOVL Aircraft

This report compiles the various research activities conducted under the auspices of the NASA Grant NAG3-1026, "Numerical Investigation of Hot Gas Ingestion by STOVL Aircraft" during the period of April 1989 to April 1994. The effort involved the development of multigrid based algorithms and computer programs for the calculation of the flow and temperature fields generated by Short Take-off and Vertical Landing (STOVL) aircraft, while hovering in ground proximity. Of particular importance has been the interaction of the exhaust jets with the head wind which gives rise to the hot gas ingestion process. The objective of new STOVL designs to reduce the temperature of the gases ingested into the engine. The present work describes a solution algorithm for the multi-dimensional elliptic partial-differential equations governing fluid flow and heat transfer in general curvilinear coordinates. The solution algorithm is based on the multigrid technique which obtains rapid convergence of the iterative numerical procedure for the discrete equations. Initial efforts were concerned with the solution of the Cartesian form of the equations. This algorithm was applied to a simulated STOVL configuration in rectangular coordinates. In the next phase of the work, a computer code for general curvilinear coordinates was constructed. This was applied to model STOVL geometries on curvilinear grids. The code was also validated in model problems. In all these efforts, the standard k-Epsilon model was used.

Vanka, S. P.↗

Physics‐based iterative reconstruction for dual‐source and flying focal spot computed tomography

Purpose For single‐source helical Computed Tomography (CT), both Filtered‐Back Projection (FBP) and statistical iterative reconstruction have been investigated. However, for dual‐source CT with flying focal spot (DS‐FFS CT), a statistical iterative reconstruction that accurately models the scanner geometry and acquisition physics remains unknown to researchers. Therefore, our purpose is to present a novel physics‐based iterative reconstruction method for DS‐FFS CT and assess its image quality. Methods Our algorithm uses precise physics models to reconstruct from the native cone‐beam geometry and interleaved dual‐source helical trajectory of a DS‐FFS CT. To do so, we construct a noise physics model to represent data acquisition noise and a prior image model to represent image noise and texture. In addition, we design forward system models to compute the locations of deflected focal spots, the dimension, and sensitivity of voxels and detector units, as well as the length of intersection between x‐rays and voxels. The forward system models further represent the coordinated movement between the dual sources by computing their x‐ray coverage gaps and overlaps at an arbitrary helical pitch. With the above models, we reconstruct images by an advanced Consensus Equilibrium (CE) numerical method to compute the maximum a posteriori estimate to a joint optimization problem that simultaneously fits all models. Results We compared our reconstruction with Siemens ADMIRE, which is the clinical standard hybrid iterative reconstruction (IR) method for DS‐FFS CT, in terms of spatial resolution, noise profile, and image artifacts through both phantoms and clinical scan datasets. Experiments show that our reconstruction has a higher spatial resolution, with a Task‐Based Modulation Transfer Function (MTF task ) consistently higher than the clinical standard hybrid IR. In addition, our reconstruction shows a reduced magnitude of image undersampling artifacts than the clinical standard. Conclusions By modeling a precise geometry and avoiding data rebinning or interpolation, our physics‐based reconstruction achieves a higher spatial resolution and fewer image artifacts with smaller magnitude than the clinical standard hybrid IR.

Wang, Xiao↗

First-generation college student forges ahead, now key to Lab's mission

Fatima Woody was just 17 and a student at Pojoaque Valley High School when she first started her career as a Los Alamos Neutron Science Center receptionist. Now she's in a crucial role that keeps plutonium pit production and other mission processes operating with as little interruption as possible. Over nearly four decades, Fatima has gradually advanced from her initial positions as a receptionist and administrative secretary to become a computer technician, then a computer system professional who specializes in project management. Today, she coordinates the workflow for nearly two dozen deployed information technology technicians who keep the computer systems and networks operating at the high-tech complex that houses the Lab's Plutonium Facility.

99 GENERAL AND MISCELLANEOUS↗

Micro Sun Sensor for Spacecraft

A report describes the development of a compact micro Sun sensor for use as a part of the attitude determination subsystem aboard future miniature spacecraft and planetary robotic vehicles. The prototype unit has a mass of only 9 g, a volume of only 4.2 cm(sup 3), a power consumption of only 30 mW, and a 120 degree field of view. The unit has demonstrated an accuracy of 1 arcminute. The unit consists of a multiple pinhole camera: A micromachined mask containing a rectangular array of microscopic pinholes, machined utilizing the microectromechanical systems (MEMS), is mounted in front of an active-pixel sensor (APS) image detector. The APS consists of a 512 x 512-pixel array, on-chip 10-bit analog to digital converter (ADC), on-chip bias generation, and on-chip timing control for self-sequencing and easy programmability. The digitized output of the APS is processed to compute the centroids of the pinhole Sun images on the APS. The Sun angle, relative to a coordinate system fixed to the sensor unit, is then computed from the positions of the centroids.

Mobasser, Sohrab↗

A review of privacy in energy applications

As the distribution system continues to experience an increase in distributed energy resource (DER) and electric vehicle (EV) penetration, so does the need for new solutions that can help grid operators manage and leverage their capabilities. This will undoubtedly lead to new operational schemes and business opportunities that will transform the traditional consumer into a prosumer who will be more actively engaged in grid operations. Although the field is still under active development, many of the potential use cases presented in literature or industry are built upon edge computing, two-way communications, and other innovative computational constructs to attain their goals. However, at their core, many use cases assume a great level of data access to aid with the decision-making process, an assumption that may need to be revised to ensure fair and equitable operational processes are maintained. This may be particularly true as edge resources are predicted to participate in retail-side, many-to-many, or peer-to-peer markets and thus may lead to financial impacts if data access considerations are ignored. The need to revise data access mechanisms can be further justified by the introduction of new participants into the operational process, who do not have the same level of trust, nor the incentives to focus on energy delivery as their primary objective. At the same time, more consumers are becoming aware of their own data, and the potential impacts of its abuse. To help solution developers better understand these risks, this report has been developed to offer an initial introduction to the topic of privacy. This is achieved by 1) Highlighting the need for privacy-aware solutions; 2) Encouraging system designers to be inquisitive about the status quo; 3) Documenting the existing threat space; 4) Presenting and evaluating tools that may be helpful towards enabling better privacy postures; and 5) Making recommendations to encourage the adoption of better practices. From a technical perspective, the report focuses on evaluating two potential techniques by applying them to the Transactive Energy Space. Based on the obtained results, it can be established that differential privacy (DP) methods may have limited applicability when highly correlated, time-series data records need to be protected. However, DP may be a powerful tool when it is used to aggregate and analyze mid-size and large-size data sets in a more traditional statistical environment. The second tool under evaluation is threshold cryptography, which can guarantee complete secrecy (and thus privacy) but requires the establishment of key management procedures and dedicated communication channels for key coordination. Therefore, due to its increased computational overhead, the use of threshold cryptography must be weighted using a cost/benefit analysis on a per-application basis.

24 POWER TRANSMISSION AND DISTRIBUTION↗

rabpro: global watershed boundaries, river elevation profiles, and catchment statistics

River and Basin Profiler (rabpro) is a Python package to delineate watersheds, extract river flowlines and elevation profiles, and compute watershed statistics for any location on the Earth’s surface. As fundamental hydrologically-relevant units of surface area, watersheds are areas of land that drain via aboveground pathways to the same location, or outlet. Delineations of watershed boundaries are typically performed on digital elevation models (DEMs) that represent surface elevations as gridded rasters. Depending on the resolution of the DEM and the size of the watershed, delineation may be very computationally expensive. With this in mind, we designed rabpro to provide user-friendly workflows to manage the complexity and computational expense of watershed calculations given an arbitrary coordinate pair. In addition to basic watershed delineation, rabpro will extract the elevation profile for a watershed’s mainchannel flowline. This enables the computation of river slope, which is a critical parameter in many hydrologic and geomorphologic models. Finally, rabpro provides a user-friendly wrapper around Google Earth Engine’s (GEE) Python API to enable cloud-computing of zonal watershed statistics and/or time-varying forcing data from hundreds of available datasets. Altogether, rabpro provides the ability to automate or semi-automate complex watershed analysis workflows across broad spatial extents.

54 ENVIRONMENTAL SCIENCES↗