Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Light-trapping and recycling for extraordinary power conversion in ultra-thin gallium-arsenide solar cells

Here, we demonstrate nearly 30% power conversion efficiency in ultra-thin (~200 nm) gallium arsenide photonic crystal solar cells by numerical solution of the coupled electromagnetic Maxwell and semiconductor drift-diffusion equations. Our architecture enables wave-interference-induced solar light trapping in the wavelength range from 300-865 nm, leading to absorption of almost 90% of incoming sunlight. Our optimized design for 200 nm equivalent bulk thickness of GaAs, is a square-lattice, slanted conical-pore photonic crystal (lattice constant 550 nm, pore diameter 600 nm, and pore depth 290 nm), passivated with AlGaAs, deposited on a silver back-reflector, with ITO upper contact and encapsulated with SiO 2 . Our model includes both radiative and non-radiative recombination of photo-generated charge carriers. When all light from radiative recombination is assumed to escape the structure, a maximum achievable photocurrent density (MAPD) of 27.6 mA/cm 2 is obtained from normally incident AM 1.5 sunlight. For a surface non-radiative recombination velocity of 10 3 cm/s, this corresponds to a solar power conversion efficiency of 28.3%. When all light from radiative recombination is trapped and reabsorbed (complete photon recycling) the power conversion efficiency increases to 29%. If the surface recombination velocity is reduced to 10 cm/sec, photon recycling is much more effective and the power conversion efficiency reaches 30.6%.

14 SOLAR ENERGY↗
DOE OSTI2016

Efficient dual acidic carbo-catalyst for one-pot conversion of carbohydrates to levulinic acid

Levulinic acid (LA) is an important platform intermediate for several high value renewable bioproducts. One-pot synthesis of LA from carbohydrates is disadvantaged by the lack of proximity of the active sites required for sequential isomerization, dehydration and rehydration reactions. Herein, we report an efficient one-pot conversion of C 6 sugars to LA using a carbo-catalyst (ZrHyC), containing Lewis acidic zirconium and Brønsted acidic carboxyl and hydroxyl sites. The proximity of the two acid sites on a hydrothermally prepared carbon support makes the catalyst highly effective enabling a maximum 73% LA yield from glucose conversion. Fructose conversion achieved a higher LA yield (89%) because of a facile reaction without involving an isomerization step. The effects of solvents, the glucose to catalyst ratio, and the reaction time on glucose conversion and LA yield are systemically examined. Detailed characterization of the catalyst using FTIR, Raman spectroscopy, XPS, XRD, FESEM and NH 3 -TPD techniques are presented to elucidate the presence of the two acid sites and zirconium in the +4 oxidation state.

09 BIOMASS FUELS↗
DOE OSTI2018

Conversion of landfill gas to liquid fuels through a TriFTS (tri-reforming and Fischer–Tropsch synthesis) process: a feasibility study

Biogas produced in landfills contains large amounts of methane (a potent greenhouse gas) and hence requires collection and treatment according to EPA regulations. Tri-reforming of such biogas (CH 4 + CO 2 ) is a combination of dry reforming, steam reforming, and partial oxidation to produce syngas (CO + H 2 ). This syngas can be converted to liquid hydrocarbons using Fischer–Tropsch Synthesis (FTS). A novel technology of combining tri-reforming and FTS (TriFTS) is proposed and utilized here to convert landfill gas (LFG) to high value added liquid hydrocarbon fuels such as gasoline, diesel, and jet fuel. This article explores the feasibility of TriFTS from an experimental and process economics point of view. Landfill gas collected from a local landfill was used in this study. After removing contaminant gases such as H 2 S and NH 3 via condensation and adsorption, NiMg/Ce 0.6 Zr 0.4 O 2 pellets were used in a tri-reforming reactor to produce H 2 and CO in a ratio suitable for FTS. The conversions of CH 4 and CO 2 were 99% and 60%, respectively. The H 2 /CO molar ratio was 1.7. In the FTS section, a Co/SiO 2 eggshell catalyst was used to synthesize liquid hydrocarbon with high selectivity for middle distillate cuts. The CO conversion in FTS was 71% and the liquid hydrocarbon product was similar to that of low sulfur diesel. The experimental results were used to conduct a preliminary economic analysis of a commercial scale TriFTS process. The results indicate that 45% of the energy contained in the LFG can be recovered in the liquid fuel generated, with the rest going to meet the energy demands of the conversion process including heat losses. The breakeven cost of diesel fuel produced was estimated as $3.24 per gal but reduces to 2.71 per gal if the LFG is assumed to be free of cost as would be the case for landfill operators. Additional renewable fuel credits will make the process even more economically attractive. This study suggests that conversion of LFG to liquid fuels is a promising new technology ripe for commercialization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this work, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhanced microbial production of protocatechuate from engineered sorghum using an integrated feedstock-to-product conversion technology

Building a stronger bioeconomy requires production capabilities that are largely generated through microbial genetic engineering. Plant feedstocks can additionally be genetically engineered to generate desirable feedstock traits and provide precursors for direct microbial conversion into desired products. The oleaginous yeast Rhodosporidium toruloides is a promising organism for this type of conversion as it can grow on a wide range of deconstructed biomass and consume a variety of carbon sources. Here, we leveraged R. toruloides native p-coumaric acid consumption pathway to accumulate protocatechuate (PCA) from 4-hydroxybenzoate (4HBA) released from a sorghum feedstock line genetically engineered to overproduce 4HBA. We did so by generating and evaluating an R. toruloides strain that accumulates PCA, RSΔ12623. We then show that at two scales a cholinium lysinate pretreatment with enzymatic saccharification successfully extracts 95% of the 4HBA from the engineered sorghum biomass while producing deconstructed lignin that can be more efficiently depolymerized in a subsequent thermochemical reaction. We also demonstrate that strain RSΔ12623 can convert more than 95% of 4HBA to PCA while consuming >95% of the glucose and >80% of the xylose present in sorghum hydrolysates. Finally, to evaluate the scalability of such fermentations, we conducted the conversion of 4HBA to PCA in a 2 L bioreactor under controlled conditions. Importantly, this work demonstrates the potential of purposefully producing aromatic precursors in planta that can be liberated during biomass deconstruction for direct microbial conversion to desirable bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Synthesis and up-conversion luminescence of Er{sup 3+} and Y b{sup 3+} codoped nanocrystalline tetra- (KLaP{sub 4}O{sub 12}) and pentaphosphates (LaP{sub 5}O{sub 14})

The up-converting nanocrystals of KLa{sub 0.95}Er{sub 0.05}Y b{sub x}P{sub 4}O{sub 12} and La{sub 0.95−x}Er{sub 0.05}Y b{sub x}P{sub 5}O{sub 14} were prepared using co-precipitation method. The spectroscopic properties of these materials were investigated in a function of Y b{sup 3+} concentration. The up-conversion emission, power dependence of emission intensities, and the luminescence decay times were investigated. It was found that the green to red and {sup 2}H{sub 11/2} → {sup 4}I{sub 15/2} to {sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} emission intensity ratio were strongly affected by the Y b{sup 3+} concentration. Moreover, the order of up-conversion emission and threshold power rises up with Y b{sup 3+} concentration for {sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} transition. The luminescence decay time of the {sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} emission increases with Y b{sup 3+} concentration while the {sup 4}F{sub 9/2} → {sup 4}I{sub 15/2} emission is independent of dopant concentration. The influence of the Y b{sup 3+} concentration on the up-conversion emission intensities was discussed in terms of concentration dependent hetero looped photon avalanche process. A comparison of the up-conversion properties of KLa{sub 0.95}Er{sub 0.05}Y b{sub x}P{sub 4}O{sub 12} and La{sub 0.95−x}Er{sub 0.05}Y b{sub x}P{sub 5}O{sub 14} nanocrystals was presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Effect of end reflections on conversion efficiency of coaxial relativistic backward wave oscillator

This paper theoretically investigates the effect of end reflections on the operation of the coaxial relativistic backward wave oscillator (CRBWO). It is found that the considerable enhancement of the end reflection at one end increases the conversion efficiency, but excessively large end reflections at both ends weaken the asynchronous wave-beam interaction and thus reduce the conversion efficiency. Perfect reflection at the post end significantly improves the interaction between the electron beam and the asynchronous harmonic so that the conversion efficiency is notably increased. Based on the theoretical research, the diffraction-CRBWO with the generated microwave diffracted and output through the front end of the coaxial slow wave structure cavity is proposed. The post end is conductively closed to provide the perfect reflection. This promotes the amplitude and uniformity of the longitudinal electric field on the beam transmission line and improves the asynchronous wave-beam interaction. In numerical simulations under the diode voltage and current of 450 kV and 5.84 kA, microwave generation with the power of 1.45 GW and the conversion efficiency of 55% are obtained at the frequency of 7.45 GHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Room-temperature spin-to-charge conversion in sputtered bismuth selenide thin films via spin pumping from yttrium iron garnet

We investigated spin-to-charge current conversion in sputtered Y 3 Fe 5 O 12 (YIG)/granular bismuth selenide (GBS) bi-layers at room temperature. The spin current is pumped to the GBS layer by the precession of magnetization at ferromagnetic resonance in the YIG layer. The spin-mixing conductance is determined to be as large as (13.64 ± 1.32) × 10 18 m -2 , which is larger than that of YIG/Pt and comparable or better than that of YIG/crystalline bismuth selenide indicating that GBS is a good spin-sink. The figure of merit of spin-to-charge conversion, the inverse Edelstein effect length ( λ IEE ), is estimated to be as large as (0.11 ± 0.03) nm. λ IEE shows GBS film thickness dependence, and its value is three times as large as in crystalline bismuth selenide. The λ IEE value larger than that of crystalline bismuth selenide and other topological insulators indicates that the spin-to-charge conversion is due to the spin-momentum locking. As the thickness of GBS increases, λ IEE decreases, which means the figure-of-merit of spin-to-charge conversion is influenced by grain size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Surface-enhanced spin current to charge current conversion efficiency in CH3NH3PbBr3-based devices

Hybrid organic-inorganic perovskites have shown great promise for spintronic applications due to their large spin-orbit coupling induced by the Pb and halogen atoms. Particularly, the large observed surface-induced Rashba splitting in CH3NH3PbBr3 indicates efficient spin-current-to-charge-current (StC) conversion, which, however, has not been demonstrated yet. In this work, the StC conversion efficiency in ferromagnet/CH3NH3PbBr3-based devices is studied using the pulsed spin-pumping technique measured by the inverse spin Hall effect. We found that the StC conversion efficiency is anomalous in that it increases at small perovskite layer thickness. This indicates the existence of a surface-dominated StC mechanism such as the inverse Rashba-Edelstein effect. By inserting a thin LiF layer between the ferromagnet and the perovskite film, the StC conversion efficiency is greatly suppressed, validating the existence of a Rashba surface in the CH3NH3PbBr3 film.

Sun, Dali (ORCID:0000000346623265)↗
DOE OSTI2023

The kinetics of the PuO 2 to Pu 2 O 3 conversion

Here in an oxidizing environment, the oxide formed on plutonium (Pu) metal is composed of a plutonium dioxide (PuO 2 ) top layer and a thin cubic plutonium sesquioxide (Pu 2 O 3 ) middle layer. In a reducing environment, the PuO 2 layer auto-reduces to cubic Pu 2 O 3 . The speed and extent of this conversion depend on the combination of temperature and time. While PuO 2 provides a strong diffusion barrier against unwanted Pu corrosion by gaseous species (like hydrogen), Pu 2 O 3 does not, since its crystal structure has chains of oxygen vacancies. The kinetics of the PuO 2 reduction are, therefore, of fundamental interest and enable researchers to better protect Pu from corrosion. In this report, the oxygen-diffusion-limited kinetics of the dioxide to sesquioxide conversion were obtained by dynamically heating a PuO 2 -covered Pu sample from 294 to 418 K in a high-vacuum vessel equipped with an in situ spectroscopic ellipsometer. The physical/chemical constraints in the conversion process were combined with the ellipsometry method of multi-sample analysis to track the percentage of PuO 2 and to compute the extent of Pu 2 O 3 formation. The resulting diffusion coefficients were compared against and then combined with complementary literature data to produce a comprehensive set of kinetic parameters for reliably modeling oxide conversion over a larger temperature range than spanned by prior studies. The extracted thermal activation energy barrier (43.7 kJ/mol) and pre-exponential factor (5.0 × 10 -10 cm 2 /s) for the oxygen-diffusion-limited process can be used to accurately model the PuO 2 to Pu 2 O 3 transformation in vacuum and/or inert gas applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermoradiative energy conversion in infrared interband cascade InAs/GaSb/AlInSb/GaSb type-II superlattice diodes

Thermoradiative energy conversion presents a means for the direct conversion of thermal energy through radiative transfer to a cold scene. However, much of the study of thermoradiative principles has been based on theory and simulations, with only sparse reports on the experimental demonstration of the concept. This work studies thermoradiative energy conversion in InAs/GaSb/AlInSb/GaSb type-II superlattice cascade devices. The devices exhibit a cutoff wavelength of 3.2 μm at 300 K, corresponding to a bandgap of 0.39 eV. Testing under a temperature-controlled chamber and scene demonstrates a maximum power density of 2.9 mW/m2 at a cell temperature of 121 °C. It is consistent with expected values for device operation limited by Shockley–Read–Hall non-radiative recombination. This result is a significant step in providing an experimental demonstration of thermoradiative energy conversion and a means to characterize cell performance, providing a foundation for further development to achieve practical values for power generation.

Islam, Md Toriqul (ORCID:0000000249871320)↗
DOE OSTI2025

Demonstration of improvement of energy conversion rate from kJ PW laser to protons with electron confinement

Kilojoule-class relativistic intensity lasers can produce energetic protons with high energy conversion efficiencies in the interaction with a thin foil target. Using the national ignition facility advanced radiographic capability (NIF-ARC) laser, we demonstrated an enhancement of energy conversion from laser to protons by the effective confinement of fast electrons in the laser spot by random kicks from the self-excited field. The number of fast electrons was increased by 4.6 times by increasing the ratio of the laser spot size to the foil thickness to strengthen the confinement effect. The energy conversion efficiency from laser to protons increases approximately linearly with the enhancement of the number of fast electrons. The conversion rate for protons with energies above 8 MeV was 1.8 %. The result leads to high efficiency proton acceleration which is beneficial in applications, such as proton radiography and plasma heating in laser fusion.

Physics↗
DOE OSTI2021

Ultrafast adiabatic frequency conversion

Abstract Ultrafast adiabatic frequency conversion is a powerful method, capable of efficiently and coherently transfering ultrashort pulses between different spectral ranges, e.g. from near-infrared to mid-infrared, visible or ultra-violet. This is highly desirable in research fields that are currently limited by available ultrafast laser sources, e.g. attosecond science, strong-field physics, high-harmonic generation spectroscopy and multidimensional mid-infrared spectroscopy. Over the past decade, adiabatic frequency conversion has substantially evolved. Initially applied to quasi-monochromatic, undepleted pump interactions, it has been generalized to include ultrashort, broadband, fully-nonlinear dynamics. Through significant theoretical development and experimental demonstrations, it has delivered new capabilities and superior performance in terms of bandwidth, efficiency and robustness, as compared to other frequency conversion techniques. This article introduces the concept of adiabatic nonlinear frequency conversion, reviews its theoretical foundations, presents significant milestones and highlights contemporary ultrafast applications that may, or already do, benefit from utilizing this method.

Margules, Peleg (ORCID:0000000335573370)↗
DOE OSTI2023

Quantifying Energy Conversion in Higher-Order Phase Space Density Moments in Plasmas

Weakly collisional and collisionless plasmas are typically far from local thermodynamic equilibrium (LTE), and understanding energy conversion in such systems is a forefront research problem. The standard approach is to investigate changes in internal (thermal) energy and density, but this omits energy conversion that changes any higher-order moments of the phase space density. In this Letter, we calculate from first principles the energy conversion associated with all higher moments of the phase space density for systems not in LTE. Particle-in-cell simulations of collisionless magnetic reconnection reveal that energy conversion associated with higher-order moments can be locally significant. Furthermore, the results may be useful in numerous plasma settings, such as reconnection, turbulence, shocks, and wave-particle interactions in heliospheric, planetary, and astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Large spin-to-charge conversion in ultrathin gold-silicon multilayers

Investigation of the spin Hall effect in gold has triggered increasing interest over the past decade, since gold combines the properties of a large bulk spin-diffusion length and strong interfacial spin-orbit coupling. However, discrepancies between the values of the spin Hall angle of gold reported in the literature have brought into question the microscopic origin of the spin Hall effect in Au. Here, we investigate the thickness dependence of the effective spin-charge conversion efficiency in single Au films and ultrathin Au/Si multilayers by nonlocal transport and spin-torque ferromagnetic resonance measurements. We show that the inferred effective spin-charge conversion efficiency is strongly enhanced in ultrathin Au/Si multilayers, reaching exceedingly large values of 0.99 ± 0.34 when the thickness of the individual Au layers is scaled down to 2 nm. These findings reveal the coexistence of a strong interfacial spin-to-charge conversion effect, which becomes dominant in ultrathin Au, and bulk spin Hall effect with a relatively low bulk spin Hall angle of 0.012 ± 0.005. Furthermore, our experimental results suggest the key role of the intrinsic spin Hall effect enhancement along with a strong interfacial spin-orbit coupling-related effect in the large spin-to-charge conversion in ultrathin Au.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of Sugarcane Cultivation on C Cycling in Southeastern United States Following Conversion From Grazed Pastures

ABSTRACT The expansion of sugarcane, a tropical high‐yielding feedstock, will likely reshape the Southeastern United States (SE US) bioenergy landscape. However, the sustainability of sugarcane, particularly as it displaces grazed pastures, is highly uncertain. Here, we investigated how pasture conversion to sugarcane in subtropical Florida impacts net ecosystem CO 2 exchange (NEE) and net ecosystem carbon (C) balance (NECB). Measurements were made over three full growth cycles (> 3 years) in sugarcane—plant cane, PC; first ratoon cane, FRC; second ratoon cane, SRC—and in improved (IM) and semi‐native (SN) pastures, which make up ca. 37% of agricultural land in the region. Immediately following conversion, PC was a stronger net source of CO 2 than pastures, indicating the importance of CO 2 losses related to land disturbance. Sugarcane, however, shifted to a strong net sink of CO 2 after first regrowth, and overall sugarcane was a stronger net CO 2 sink than pastures. Both stand age and low water availability during cane emergence and tillering substantially decreased its potential gross CO 2 uptake. Accounting for all C gains and removals (i.e., NECB), greater frequency of burn events and repeated harvest increased removals and overall made sugarcane a stronger C source relative to pastures despite substantial C inputs from the previous land use and a stronger CO 2 sink strength. Time since conversion substantially reduced C losses from sugarcane, and the NECB of SRC was similar to that of IM pasture but lower than that of SN pasture, indicating a rapid shift in the NECB of cane. We conclude that the C‐balance implications following conversion will depend on the proportion of IM versus SN pastures converted to sugarcane. Furthermore, our findings suggest that no‐burn harvest management strategies will be critical to the development of a sustainable bioenergy landscape in SE US.

Gomez‐Casanovas, Nuria↗
DOE OSTI2015

SU-E-I-07: Response Characteristics and Signal Conversion Modeling of KV Flat-Panel Detector in Cone Beam CT System

Purpose: The flat-panel detector response characteristics are investigated to optimize the scanning parameter considering the image quality and less radiation dose. The signal conversion model is also established to predict the tumor shape and physical thickness changes. Methods: With the ELEKTA XVI system, the planar images of 10cm water phantom were obtained under different image acquisition conditions, including tube voltage, electric current, exposure time and frames. The averaged responses of square area in center were analyzed using Origin8.0. The response characteristics for each scanning parameter were depicted by different fitting types. The transmission measured for 10cm water was compared to Monte Carlo simulation. Using the quadratic calibration method, a series of variable-thickness water phantoms images were acquired to derive the signal conversion model. A 20cm wedge water phantom with 2cm step thickness was used to verify the model. At last, the stability and reproducibility of the model were explored during a four week period. Results: The gray values of image center all decreased with the increase of different image acquisition parameter presets. The fitting types adopted were linear fitting, quadratic polynomial fitting, Gauss fitting and logarithmic fitting with the fitting R-Square 0.992, 0.995, 0.997 and 0.996 respectively. For 10cm water phantom, the transmission measured showed better uniformity than Monte Carlo simulation. The wedge phantom experiment show that the radiological thickness changes prediction error was in the range of (-4mm, 5mm). The signal conversion model remained consistent over a period of four weeks. Conclusion: The flat-panel response decrease with the increase of different scanning parameters. The preferred scanning parameter combination was 100kV, 10mA, 10ms, 15frames. It is suggested that the signal conversion model could effectively be used for tumor shape change and radiological thickness prediction. Supported by National Natural Science Foundation of China (81101132, 11305203) and Natural Science Foundation of Anhui Province (11040606Q55, 1308085QH138)

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

SU-E-J-122: The CBCT Dose Calculation Using a Patient Specific CBCT Number to Mass Density Conversion Curve Based On a Novel Image Registration and Organ Mapping Method in Head-And-Neck Radiation Therapy

Purpose: To develop a CBCT HU correction method using a patient specific HU to mass density conversion curve based on a novel image registration and organ mapping method for head-and-neck radiation therapy. Methods: There are three steps to generate a patient specific CBCT HU to mass density conversion curve. First, we developed a novel robust image registration method based on sparseness analysis to register the planning CT (PCT) and the CBCT. Second, a novel organ mapping method was developed to transfer the organs at risk (OAR) contours from the PCT to the CBCT and corresponding mean HU values of each OAR were measured in both the PCT and CBCT volumes. Third, a set of PCT and CBCT HU to mass density conversion curves were created based on the mean HU values of OARs and the corresponding mass density of the OAR in the PCT. Then, we compared our proposed conversion curve with the traditional Catphan phantom based CBCT HU to mass density calibration curve. Both curves were input into the treatment planning system (TPS) for dose calculation. Last, the PTV and OAR doses, DVH and dose distributions of CBCT plans are compared to the original treatment plan. Results: One head-and-neck cases which contained a pair of PCT and CBCT was used. The dose differences between the PCT and CBCT plans using the proposed method are −1.33% for the mean PTV, 0.06% for PTV D95%, and −0.56% for the left neck. The dose differences between plans of PCT and CBCT corrected using the CATPhan based method are −4.39% for mean PTV, 4.07% for PTV D95%, and −2.01% for the left neck. Conclusion: The proposed CBCT HU correction method achieves better agreement with the original treatment plan compared to the traditional CATPhan based calibration method.

60 APPLIED LIFE SCIENCES↗