Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coalescence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Towards the Ultimate Strength of Medium‐Entropy Alloys Through Pulsed Lasers

The tensile strength of metals at extreme strain rates is a key predictor of their performance in ballistic and structural impact applications. An important experimental method to reach these extreme strain rates is the use of high-amplitude, short-duration pulsed lasers. The Jupiter Laser Facility at the Lawrence Livermore National Laboratory enabled probing for the first time the mechanical response of several promising High Entropy Alloys at times on the order of nanoseconds (strain rates of ∼10 7 and ∼10 9 s −1 ). The measured strength is in the range of 6 to 10 GPa, ten times the quasistatic value. The mechanisms of plastic deformation and failure were identified and quantified through analysis and molecular dynamics simulation. The reflected wave amplitudes, obtained by VISAR, were used to determine the tensile (spall) stress. The high tensile strength obtained is due to two factors: the strain-rate dependence of plastic flow and the kinetics of void nucleation, growth, and coalescence. The experimental results are compared with an analytical prediction considering both grain-interior and grain-boundary void initiation. Molecular dynamics simulations, conducted at strain rates of 10 8 and 10 9 s −1 , rationalize the experimental results. In conclusion, they provide valuable information about the process of failure evolution, and reveal that grain boundary separation plays a pivotal role in spalling.

Materials science↗
DOE OSTI2020

Unraveling the Crystallization Kinetics of 2D Perovskites with Sandwich-Type Structure for High-Performance Photovoltaics

2D perovskite solar cells with high stability and high efficiency have attracted significant attention. A systematical static and dynamic structure investigation is carried out to show the details of 2D morphology evolution. A dual additive approach is used, where the synergy between an alkali metal cation and a polar solvent leads to high-quality 2D perovskite films with sandwich-type structures and vertical phase segregation. Such novel structure can induce high-quality 2D slab growth and reduce internal and surface defects, resulting in a high device efficiency of 16.48% with enhanced continuous illumination stability and improved moisture (55-60%) and thermal (85°C) tolerances. Transient absorption spectra reveal the carrier migration from low n to high n species with different kinetics. An [PbI 6 ] 4- octagon coalescence transformation mechanism coupled with metal and organic cations wrapped is proposed. By solvent vapor annealing, a recrystallization and reorientation of the 2D perovskite slabs occurs to form an ideal structure with improved device performance and stability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Scalable Substitutional Re‐Doping and its Impact on the Optical and Electronic Properties of Tungsten Diselenide

Abstract Reliable, controlled doping of 2D transition metal dichalcogenides will enable the realization of next‐generation electronic, logic‐memory, and magnetic devices based on these materials. However, to date, accurate control over dopant concentration and scalability of the process remains a challenge. Here, a systematic study of scalable in situ doping of fully coalesced 2D WSe 2 films with Re atoms via metal–organic chemical vapor deposition is reported. Dopant concentrations are uniformly distributed over the substrate surface, with precisely controlled concentrations down to <0.001% Re achieved by tuning the precursor partial pressure. Moreover, the impact of doping on morphological, chemical, optical, and electronic properties of WSe 2 is elucidated with detailed experimental and theoretical examinations, confirming that the substitutional doping of Re at the W site leads to n‐type behavior of WSe 2 . Transport characteristics of fabricated back‐gated field‐effect‐transistors are directly correlated to the dopant concentration, with degrading device performances for doping concentrations exceeding 1% of Re. The study demonstrates a viable approach to introducing true dopant‐level impurities with high precision, which can be scaled up to batch production for applications beyond digital electronics.

Kozhakhmetov, Azimkhan↗
DOE OSTI2022

Magnetic Ordering in a High‐Spin Donor–Acceptor Conjugated Polymer

Abstract The development of open‐shell organic molecules that magnetically order at room temperature,which can be practically applied, remains a grand challenge in chemistry, physics, and materials science. Despite the exploration of vast chemical space, design paradigms for organic paramagnetic centers generally result in unpaired electron spins that are unstable or isotropic. Here, a high‐spin conjugated polymer is demonstrated, which is composed of alternating cyclopentadithiophene and benzo[1,2‐ c ;4,5‐ c ′]bis[1,2,5]thiadiazole heterocycles, in which macromolecular structure and topology coalesce to promote the spin center generation and intermolecular exchange coupling. Electron paramagnetic resonance (EPR) spectroscopy is consistent with spatially localized spins, while magnetic susceptibility measurements show clear anisotropic spin ordering and exchange interactions that persist at room temperature. The application of long‐range π‐correlations for spin center generation promotes remarkable stability. This work offers a fundamentally new approach to the implementation of this long‐sought‐after physical phenomenon within organic materials and the integration of manifold properties within emerging technologies.

Steelman, Michael E.↗
DOE OSTI2023

Semiconductor Thermal and Electrical Properties Decoupled by Localized Phonon Resonances

Abstract Thermoelectric materials convert heat into electricity through thermally driven charge transport in solids or vice versa for cooling. To compete with conventional energy‐conversion technologies, a thermoelectric material must possess the properties of both an electrical conductor and a thermal insulator. However, these properties are normally mutually exclusive because of the interconnection between scattering mechanisms for charge carriers and phonons. Recent theoretical investigations on sub‐device scales have revealed that nanopillars attached to a membrane exhibit a multitude of local phonon resonances, spanning the full spectrum, that couple with the heat‐carrying phonons in the membrane and cause a reduction in the in‐plane thermal conductivity, with no expected change in the electrical properties because the nanopillars are outside the pathway of voltage generation and charge transport. Here this effect is demonstrated experimentally for the first time by investigating device‐scale suspended silicon membranes with GaN nanopillars grown on the surface. The nanopillars cause up to 21% reduction in the thermal conductivity while the power factor remains unaffected, thus demonstrating an unprecedented decoupling in the semiconductor's thermoelectric properties. The measured thermal conductivity behavior for coalesced nanopillars and corresponding lattice‐dynamics calculations provide evidence that the reductions are mechanistically tied to the phonon resonances. This finding paves the way for high‐efficiency solid‐state energy recovery and cooling.

Spann, Bryan T.↗
DOE OSTI2024

Visualizing the Internal Nanocrystallinity of Calcite Due to Nonclassical Crystallization by 3D Coherent X–Ray Diffraction Imaging

The internal crystallinity of calcite is investigated for samples synthesized using two approaches: precipitation from solution and the ammonium carbonate diffusion method. Scanning electron microscopy (SEM) analyses reveal that the calcite products precipitated using both approaches have a well–defined rhombohedron shape, consistent with the euhedral crystal habit of the mineral. The internal structure of these calcite crystals is characterized using Bragg coherent diffraction imaging (BCDI) to determine the 3D electron density and the atomic displacement field. BCDI reconstructions for crystals synthesized using the ammonium carbonate diffusion approach have the expected euhedral shape, with internal strain fields and few internal defects. In contrast, the crystals synthesized by precipitation from solution have very complex external shapes and defective internal structures, presenting null electron density regions and pronounced displacement field distributions. These heterogeneities are interpreted as multiple crystalline domains, created by a nonclassical crystallization mechanism, where smaller nanoparticles coalescence into the final euhedral particles. The combined use of SEM, X–ray diffraction (XRD), and BCDI allows for structurally differentiating calcite crystals grown with different approaches, opening new opportunities to understand how grain boundaries and internal defects alter calcite reactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamic Interfacial Architectures: Cruciferin‐Stabilized Oil/Water Interfaces for Sustainable Emulsions

Stabilizing oil-water interfaces in emulsions by plant-based proteins provides sustainable and tunable ways for designing emulsions with specific properties, for food, healthcare, and pharmaceuticals. Cruciferin, a protein from rapeseed, has great potential as green emulsifier, but details about its structure and mobility at oil-water interfaces are largely unknown. Here, these properties are studied with small angle neutron and x-ray scattering, and neutron spin echo spectroscopy, analyzed by atomistic modelling of scattering curves and coarse-grained modelling, to gain insight into interface coverage, and molecular conformation and mobility at the interface. Cruciferin assumes trimeric conformations at the interface, as in solution, but with its protrusions from the central core of the subunits (“arms”) more compressed. Interfacial mobility is only marginally lower than in solution, indicating the arms still transiently extend and preserve a network, for the first time revealing the mechanism how cruciferin forms highly elastic 2d gel-like oil-water interfaces, as observed in macroscopic rheology. The high interfacial mobility may help in self-repairing non-stabilized interfacial fractions, reducing coalescence. These findings provide a deeper molecular level understanding of proteins at oil-water interfaces, which can stimulate development of new plant-based emulsion products, and contribute to the global protein transition.

cruciferin↗
DOE OSTI2023

Reconfigurable Magnetic Liquid Building Blocks for Constructing Artificial Spinal Column Tissues

All-liquid molding can be used to transform a liquid into free-form solid constructs, while maintaining internal fluidity. Traditional biological scaffolds, such as cured pre-gels, are normally processed in solid state, sacrificing flowability and permeability. However, it is essential to maintain the fluidity of the scaffold to truly mimic the complexity and heterogeneity of natural human tissues. Here, this work molds an aqueous biomaterial ink into liquid building blocks with rigid shapes while preserving internal fluidity. The molded ink blocks for bone-like vertebrae and cartilaginous-intervertebral-disc shapes, are magnetically manipulated to assemble into hierarchical structures as a scaffold for subsequent spinal column tissue growth. It is also possible to join separate ink blocks by interfacial coalescence, different from bridging solid blocks by interfacial fixation. Generally, aqueous biomaterial inks are molded into shapes with high fidelity by the interfacial jamming of alginate surfactants. The molded liquid blocks can be reconfigured using induced magnetic dipoles, that dictated the magnetic assembly behavior of liquid blocks. The implanted spinal column tissue exhibits a biocompatibility based on in vitro seeding and in vivo cultivating results, showing potential physiological function such as bending of the spinal column.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Terahertz‐Nanoscale Visualization of the Microscopic Spin‐Charge Architecture of Colossal Magnetoresistive Switching

Resolving sub-10 nm spin switching and the associated terahertz (THz) electrodynamics during the colossal magnetoresistance (CMR) transition is a definitive frontier in reaching the fundamental spatial, temporal, and energy-dissipation limits of spin-electronics. Yet, simultaneous control of high magnetic field, cryogenic environment, and nanometer resolution has remained an elusive benchmark for THz nanoscopy, leaving the local THz dynamics of these transitions largely unexplored. Here, we overcome these limitations by utilizing a custom-built cryogenic magneto-THz scattering-type scanning near-field optical microscopy (cm-THz-sSNOM) to resolve the near-field THz spectroscopic evolution of the magnetic field-driven CMR transition in a manganite single crystal. Our measurements provide a nanoscale visualization of the THz conductivity, capturing the moment that magnetic-field-induced spin switching triggers the transition from an antiferromagnetic insulator to a ferromagnetic metal. An ellipsoidal near-field model reveals a multi-scale transition initiated by 1–2 nm isolated spin-flip sites at low magnetic fields, which coalesce into ∼15 nm conducting regions as the threshold field is approached. These results provide an nano-THz view of CMR switching, establishing an analysis framework for mapping spin–charge–lattice–orbit–coupled dynamics at spatial scales that transcend the nominal sSNOM resolution.

Haeuser, Samuel [Iowa State University, Ames, IA (↗
DOE OSTI2020

Periodic Porous 3D Electrodes Mitigate Gas Bubble Traffic during Alkaline Water Electrolysis at High Current Densities

We report alkaline water electrolysis at high current densities is plagued by gas bubble generation and trapping in stochastic porous electrodes (e.g., Ni foams), which causes a significant reduction in the number of electrolyte accessible catalyst active sites. Here, 3D printed Ni (3DPNi) electrodes with highly controlled, periodic structures are reported that suppress gas bubble coalescence, jamming, and trapping and, hence, result in rapid bubble release. The 3DPNi electrodes decorated with carbon-doped NiO achieve a high current density of 1000 mA cm -2 in 1.0 m KOH electrolyte at hydrogen evolution reaction and oxygen evolution reaction overpotentials of 245 and 425 mV, respectively. This work demonstrates a new approach to the deterministic design of 3D electrodes to facilitate rapid bubble transport and release to enhance the total electrode catalytic activity at commercially relevant current densities.

08 HYDROGEN↗
DOE OSTI2023

Nanocone-Modified Surface Facilitates Gas Bubble Detachment for High-Rate Alkaline Water Splitting

The significant amount of gas bubbles generated during high-rate alkaline water splitting (AWS) can be detrimental to the process. The accumulation of bubbles will block the active catalytic sites and hinder the ion and electrolyte diffusion, limiting the maximum current density. Furthermore, the detachment of large bubbles can also damage the electrode's surface layer. Here, a general strategy for facilitating bubble detachment is demonstrated by modifying the nickel electrode surface with nickel nanocone nanostructures, which turns the surface into underwater superaerophobic. Simulation and experimental data show that bubbles take a considerably shorter time to detach from the nanocone-modified nickel foil than the unmodified foil. As a result, these bubbles also have a smaller detachment size and less chance for bubble coalescence. The nanocone-modified electrodes, including nickel foil, nickel foam, and 3D-printed nickel lattice, all show substantially reduced overpotentials at 1000 mA cm -2 compared to their pristine counterpart. The electrolyzer assembled with two nanocone-modified nickel lattice electrodes retains >95% of the performance after testing at ≈900 mA cm -2 for 100 h. In conclusion, the surface NC structure is also well preserved. The findings offer an exciting and simple strategy for enhancing the bubble detachment and, thus, the electrode activity for high-rate AWS.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Can Charge Transfer Across C─H⋅⋅⋅O Hydrogen Bonds Stabilize Oil Droplets in Water?

Oil-water emulsions resist aggregation due to the presence of negative charges at their surface that leads to mutual repulsion between droplets, but the molecular origin of oil charge is currently under debate. Although much evidence has suggested that ionic species must accumulate at the interface, an alternative perspective attributes the negative charge on the oil droplet to charge transfer of electron density from water to oil molecules. Although the charge transfer mechanism is consistent with the correct sign of oil charge, it is just as important to provide good estimates of the charge magnitude to explain emulsion stability and electrophoresis experiments. Here, we show using energy decomposition analysis that the amount of net flow of charge from water to oil is negligibly small due to nearly equal forward and backward charge transfer through weak oil-water interactions, such that oil droplets would be unstable and coalesce, contrary to experiment. The lack of charge transfer also explains why vibrational sum frequency scattering reports a blue shift in the oil C-H frequency when forming emulsions with water, which arises from Pauli repulsion due to localized confinement at the interface. Finally, unlike ions, neither charge transfer nor dynamic polarization can produce a finite conductivity needed to couple to electric fields that would explain electrophoretic mobility.

Zhao, Ruoqi↗
DOE OSTI2021

Relationship between microstructure evolution and properties enhancement of carbon nanotubes‐filled polybutylene terephthalate/polypropylene blends induced by thermal annealing

Abstract Thermal annealing induced microstructure evolution and properties enhancement of polybutylene terephthalate/polypropylene/carbon nanotubes (PBT/PP/CNTs) nanocomposites was methodically investigated. The electrical conductive PBT/PP/CNTs nanocomposites with a low percolation threshold were obtained by simple melt blending due to the selective location of the CNTs in PBT phase and the formation of the double percolation structure. Thermal annealing further remarkably decreased the volume resistivity of the nanocomposites, with the maximum reduction of seven orders of magnitude. Scanning electron microscope observation and rheology tests demonstrated that the relatively large CNTs agglomerates were redistributed to build more homogeneous CNTs networks after annealing. The phase coalescence during annealing promoted the formation of the more perfect co‐continuous structure. These phenomena helped to enhance the electrical conductivity of the nanocomposites. Flexural properties of the nanocomposites were also enhanced after annealing, which might be due to the more effective stress transfer between the polymer and CNTs induced by the reconstructed CNTs networks. The nanocomposites obtained in this study possess excellent electrical and mechanical properties, which can be applied to the fields of sensors, electromagnetic interference shielding, anti‐static materials, and so forth.

Shang, Mengyao↗
DOE OSTI2021

Ageing of PBF‐Grade Poly(Phenylene Sulfide) Powder and its Effect on Critical Printability Properties

Abstract Poly(phenylene sulfide) (PPS) is a high‐performance polymer suiting the needs of powder bed fusion (PBF) early‐adopter industries. Although there are many benefits to PBF's powder bed‐based, one drawback is thermal ageing of the powder not incorporated into printed parts. Ideally, unfused powder can be reused in future builds; however, it is unlikely that critical printability properties of the thermally aged powder will remain unchanged. Changes in properties lead to either limited reuse through a practice of mixing used and new powder, or elimination of all powder after each build. In this paper, the authors report effects of thermal ageing in simulated printing conditions on properties of PPS critical to PBF processing. PBF‐grade PPS powder is exposed to process‐mimicking conditions. Properties relevant to the three PBF manufacturing process sub‐functions are assessed for the aged powders. Single‐layer prints are made using aged powder to observe polymer‐PBF interactions ad machina. Significant and systematic deviations from the as‐received state of the powder are observed for thermal and coalescence related properties with increasing exposure time and temperature. These changes are interpreted both in terms of physical and chemical changes in PPS and in terms of how these changes may impact the PBF printing process.

Chatham, Camden A.↗
DOE OSTI2022

Synthesis and acoustic properties study of castor‐oil‐based polyurethane foams with the addition of graphene‐oxide‐modified straw fibers

Abstract Polyurethane foam (PUF) can absorb sound by air friction and structural vibrations of cell walls. It is widely used as acoustic material in the automotive industry. According to existing studies, graphene oxide (GO) can improve the acoustic properties of PUF. However, GO tends to coalesce inside PUF. In this paper, straw fibers were modified with different concentrations of GO solution to embed GO on the surface of plant fibers. The GO was dispersed in the PUF using straw fibers. In addition, some studies show that the wrinkled morphology of the GO surface is believed to play a mechanical interlocking role in improving interfacial bonding, thus enhancing the stress transfer between the plant fibers and the polyurethane (PU) matrix and improving the mechanical properties of the PU composites. The acoustic and mechanical properties of the modified PU materials were observed by treating plant fibers with appropriate amounts of GO solution. The experimental study shows that the sample modified with 1 g L −1 GO solution reaches a maximum average sound absorption coefficient of 0.5838 when the straw fiber content reaches 0.5 g, and the sample modified with 2 g L −1 GO solution reaches a maximum transmission loss of 10.5333 when the straw fiber content reaches 1 g. © 2022 Society of Industrial Chemistry.

Yang, Keyao↗
DOE OSTI2024

Quantifying the cooperative evolution of microphase segregation and nanostructural order in annealed polyurethanes of MDI-BDO-PTHF

Here, we quantify the relationship between microphase segregation and local structure development in thermoplastic polyurethanes. Samples were prepared with varying ratios of 4,40 -methylene diphenyl diisocyanate (MDI) and 1,4-butanediol (BDO) to polytetrahydrofuran (PTHF) and annealed at temperatures T a between RT–140 °C for 20 h each. Distinct populations of smaller and larger ordered domains are distinguished by pair distribution func tion analysis. The intermediate-range order of nanoscale hard domains in the paracrystalline state (form I) is directly extracted and characterized. The results suggest that form I of the MDI-BDO:PTHF system presents a conformational and packing order similar to the form III structure, typically obtained from stretching/annealing, but with limited spatial coherence of 3–7 nm. Heating above T g of the hard segments is necessary to achieve a substantial structural response from the annealing treatment. Increasing T a promotes purification of the soft phase via microphase segregation, coalescence of the hard blocks, and growth of paracrystalline phase, while a minority fraction of longer-range ordered domains left over from production remains relatively constant. We observe a composition-dependent decrease in the average nearest-neighbor dis tance that can be correlated with the greater number of C C, C N, and C O bonds with increased hard segment content. A non-linear deviation in the trend is observed to correlate with sample densification. The mechanical and thermal behavior of the samples is intimately tied to the segregation state.

processing-structure-properties↗
DOE OSTI2020

Shock Initiation Microscopy with High Time and Space Resolution

In this paper, we describe studies of shock initiation and shock-to-detonation transitions in energetic materials using a tabletop shock compression microscope with nanosecond time resolution and micrometer spatial resolution. Planar input shocks with durations of 4–20 ns are produced using 0–4.5 km/s laser-launched flyer plates. Emphasis is on measurements of temperature, velocities, pressure, and microstructure using photon Doppler velocimetry (PDV), optical pyrometry and high-speed videography. Techniques are discussed for fabricating disposable shock target arrays of tiny plastic-bonded explosives (PBX), liquid and powder explosives, and single-crystal explosives for high-throughput studies. Optical temperature measurements of shocked triaminotrinitrobenzene (TATB) are discussed. Since TATB is yellow, we developed methods to correct for the blue absorption to obtain more accurate temperatures. Hot spots in shocked polymer-encased HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) crystals are observed in real-time, showing a hot spot produced in a collapsing void that ignites a deflagration. Despite the small dimensions of our explosive charges (typically 1 mm diameter and 250 μm length), we produced reproducible detonation states in solid and liquid explosives using short-duration shocks near the von Neumann spike (VNS) pressure. We show the VNS pressure is associated with a transition to high-efficiency gas production from the explosives. In studies of NM, prior to detonation, we see reaction originating at hot spots which coalesce to form a superdetonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Investigation of thermal damage in explosive bridgewire detonators via discrete element method simulations

Exploding bridgewire (EBW) detonators are used to rapidly and reliably initiate energetic reactions by exploding a bridgewire via Joule heating. While the mechanisms of EBW detonators have been studied extensively in nominal conditions, comparatively few studies have addressed thermally damaged detonator operability. We present a mesoscale simulation study of thermal damage in a representative EBW detonator, using discrete element method (DEM) simulations that explicitly account for individual particles in the pressed explosive powder. We use a simplified model of melting, where solid spherical particles undergo uniform shrinking, and fluid dynamics are ignored. The subsequent settling of particles results in the formation of a gap between the solid powder and the bridgewire, which we study under different conditions. In particular, particle cohesion has a significant effect on gap formation and settling behavior, where sufficiently high cohesion leads to coalescence of particles into a free-standing pellet. This behavior is qualitatively compared to experimental visualization data, and simulations are shown to capture several key changes in pellet shape. We derive a minimum and maximum limit on gap formation during melting using simple geometric arguments. In the absence of cohesion, results agree with the maximum gap size. With increasing cohesion, the gap size decreases, eventually saturating at the minimum limit. In conclusion, we present results for different combinations of interparticle cohesion and detonator orientations with respect to gravity, demonstrating the complex behavior of these systems and the potential for DEM simulations to capture a range of scenarios.

cohesive powders↗