Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud parameterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Coordinated Parameterization Development and Large-Eddy Simulation for Marine and Arctic Cloud-Topped Boundary Layers

The goal of this project was to compare observations of marine and arctic boundary layers with: (1) parameterization systems used in climate and weather forecast models; and (2) two and three dimensional eddy resolving (LES) models for turbulent fluid flow. Based on this comparison, we hoped to better understand, predict, and parameterize the boundary layer structure and cloud amount, type, and thickness as functions of large scale conditions that are predicted by global climate models. The principal achievements of the project were as follows: (1) Development of a novel boundary layer parameterization for large-scale models that better represents the physical processes in marine boundary layer clouds; and (2) Comparison of column output from the ECMWF global forecast model with observations from the SHEBA experiment. Overall the forecast model did predict most of the major precipitation events and synoptic variability observed over the year of observation of the SHEBA ice camp.

Bretherton, Christopher S.↗
NASA NTRS1985

Preliminary GCM Results with a New Radiation Parameterization

A new parameterization of solar and terrestrial radiation was developed and tested. The solar radiation parameterization is based on that of Lacis and Hansen (1974), but with zenith-angle-dependent surface albedoes, and revised treatments of cloudiness. The terrestrial radiation parameterization is based on the work of Chou (1984) for water vapor, Chou and Peng (1983) for carbon dioxide, and Rogers (1968) for ozone, with a new parameterization of the effects of clouds. Results obtained were compared with the new parameterizations to those obtained with the earlier parameterization described by Schlessinger (1976). Several dramatic improvements came to light. For the most part these are related to the fact that the new terrestrial radiation paramerization includes the effects of the water vapor continuum, while the earlier parameterization does not. In the moist tropical planetary boundary layer (PBL) continuum emission leads to much stronger cooling of the PBL over the oceans. Over land, however, the cooling of the PBL is significantly reduced. The latter, somewhat paradoxical result is due to the strong diurnal cycle of the continental PBL. At night the shallow continental PBL is overlain by a moist layer created by mixing during the previous afternoon. The moist upper layer acts as a radiative blanket, reducing the time-averaged radiative cooling of the continental PBL.

Randall, D.↗
NASA NTRS2000

The Influence of Soil Moisture, Coastline Curvature, and Land-Breeze Circulations on Sea-Breeze Initiated Precipitation

Idealized numerical simulations are performed with a coupled atmosphere/land-surface model to identify the roles of initial soil moisture, coastline curvature, and land breeze circulations on sea breeze initiated precipitation. Data collected on 27 July 1991 during the Convection and Precipitation Electrification Experiment (CAPE) in central Florida are used. The 3D Goddard Cumulus Ensemble (GCE) cloud resolving model is coupled with the Goddard Parameterization for Land-Atmosphere-Cloud Exchange (PLACE) land surface model, thus providing a tool to simulate more realistically land-surface/atmosphere interaction and convective initiation. Eight simulations are conducted with either straight or curved coast-lines, initially homogeneous soil moisture or initially variable soil moisture, and initially homogeneous horizontal winds or initially variable horizontal winds (land breezes). All model simulations capture the diurnal evolution and general distribution of sea-breeze initiated precipitation over central Florida. The distribution of initial soil moisture influences the timing, intensity and location of subsequent precipitation. Soil moisture acts as a moisture source for the atmosphere, increases the connectively available potential energy, and thus preferentially focuses heavy precipitation over existing wet soil. Strong soil moisture-induced mesoscale circulations are not evident in these simulations. Coastline curvature has a major impact on the timing and location of precipitation. Earlier low-level convergence occurs inland of convex coastlines, and subsequent precipitation occurs earlier in simulations with curved coastlines. The presence of initial land breezes alone has little impact on subsequent precipitation. however, simulations with both coastline curvature and initial land breezes produce significantly larger peak rain rates due to nonlinear interactions.

Baker, David R.↗
DOE OSTI2018

Analysis of Cloud-Resolving Model Simulations for Scale Dependence of Convective Momentum Transport

Abstract We use 3D cloud-resolving model (CRM) simulations of two mesoscale convective systems at midlatitudes and a simple statistical ensemble method to diagnose the scale dependency of convective momentum transport (CMT) and CMT-related properties and evaluate a parameterization scheme for the convection-induced pressure gradient (CIPG) developed by Gregory et al. Gregory et al. relate CIPG to a constant coefficient multiplied by mass flux and vertical mean wind shear. CRM results show that mass fluxes and CMT exhibit strong scale dependency in temporal evolution and vertical structure. The upgradient–downgradient CMT characteristics for updrafts are generally similar between small and large grid spacings, which is consistent with previous understanding, but they can be different for downdrafts across wide-ranging grid spacings. For the small to medium grid spacings (4–64 km), Gregory et al. reproduce some aspects of CIPG scale dependency except for underestimating the variations of CIPG as grid spacing decreases. However, for large grid spacings (128–512 km), Gregory et al. might even less adequately parameterize CIPG because it omits the contribution from either the nonlinear-shear or the buoyancy forcings. Further diagnosis of CRM results suggests that inclusion of nonlinear-shear forcing in Gregory et al. is needed for the large grid spacings. For the small to median grid spacings, a modified Gregory et al. with the three-updraft approach help better capture the variations of CIPG as grid spacing decreases compared to the single updraft approach. Further, the optimal coefficients used in Gregory et al. seem insensitive to grid spacings, but they might be different for updrafts and downdrafts, for different MCS types, and for zonal and meridional components.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Impacts of aerosol size-dependent below-cloud scavenging on tropospheric aerosol in the NASA GEOS model

Wet deposition is the major sink for a suite of tropospheric aerosols, and thus largely affects the global distribution and lifetime of aerosols as well as the formation of clouds in the atmosphere. In this study, we implement the aerosol size-dependent below-cloud scavenging (BCS; washout) parameterization of Croft et al. (Atmos. Chem. Phys., 2009; hereafter referred to as C09) in the GOCART bulk aerosol scheme coupled with the NASA Goddard Earth Observing System (GEOS) model, and evaluate the simulated tropospheric aerosols against surface, airborne, and satellite observations. The current below-cloud scavenging in GOCART employs a first-order removal function with a constant scavenging coefficient that is independent of aerosol sizes and precipitation fluxes. The C09 BCS parameterization instead calculates aerosol below-cloud scavenging coefficients based on a size-dependent collision efficiency between aerosol particles and raindrops (or snow crystals). A look-up table of compiled collision efficiencies provides scavenging coefficients for sixty aerosol sizes and nine rain flux rates. We determine instantaneous coefficients according to the C09 BCS look-up table, precipitation fluxes, and a log-normal size distribution of aerosols. The implemented BCS parameterization tends to result in a large diversity of scavenging coefficient values with higher magnitudes, leading to more efficient scavenging. The model-simulated global mean tropospheric Pb-210 aerosol lifetime decreases from 7.4 days to 5.8 days. The separate consideration of rain and snow conditions in the scavenging coefficient lookup table leads to a bi-mode distribution of scavenging coefficients. These changes also cause increased mass fractions of smaller aerosols compared to the current simulation. We examine the impacts of the C09 BCS parameterization on the simulated aerosol vertical profiles, tropospheric lifetimes, and deposition fluxes through comparisons with NASA aircraft measurements (ATom), surface observations of aerosol concentrations (IMPROVE) and wet deposition fluxes (NADP and APQMP), and MODIS aerosol optical depth (AOD) retrievals.

Aerosols↗
NASA NTRS1993

Inference of cirrus cloud properties using satellite-observed visible and infrared radiances. I - Parameterization of radiance fields

The impact of using phase functions for spherical droplets and hexagonal ice crystals to analyze radiances from cirrus is examined. Adding-doubling radiative transfer calculations are employed to compute radiances for different cloud thicknesses and heights over various backgrounds. These radiances are used to develop parameterizations of top-of-the-atmosphere visible reflectance and IR emittance using tables of reflectances as a function of cloud optical depth, viewing and illumination angles, and microphysics. This parameterization, which includes Rayleigh scattering, ozone absorption, variable cloud height, and an anisotropic surface reflectance, reproduces the computed top-of-the-atmosphere reflectances with an accruacy of +/- 6 percent for four microphysical models: 10-micron water droplet, small symmetric crystal, cirrostratus, and cirrus uncinus. The accuracy is twice that of previous models.

Minnis, Patrick↗
NASA NTRS2001

Satellite Remote Sensing of Tropical Precipitation and Ice Clouds for GCM Verification

This project, supported by the NASA New Investigator Program, has primarily been funding a graduate student, Darren McKague. Since August 1999 Darren has been working part time at Raytheon, while continuing his PhD research. Darren is planning to finish his thesis work in May 2001, thus some of the work described here is ongoing. The proposed research was to use GOES visible and infrared imager data and SSM/I microwave data to obtain joint distributions of cirrus cloud ice mass and precipitation for a study region in the Eastern Tropical Pacific. These joint distributions of cirrus cloud and rainfall were to be compared to those from the CSU general circulation model to evaluate the cloud microphysical amd cumulus parameterizations in the GCM. Existing algorithms were to be used for the retrieval of cloud ice water path from GOES (Minnis) and rainfall from SSM/I (Wilheit). A theoretical study using radiative transfer models and realistic variations in cloud and precipitation profiles was to be used to estimate the retrieval errors. Due to the unavailability of the GOES satellite cloud retrieval algorithm from Dr. Minnis (a co-PI), there was a change in the approach and emphasis of the project. The new approach was to develop a completely new type of remote sensing algorithm - one to directly retrieve joint probability density functions (pdf's) of cloud properties from multi-dimensional histograms of satellite radiances. The usual approach is to retrieve individual pixels of variables (i.e. cloud optical depth), and then aggregate the information. Only statistical information is actually needed, however, and so a more direct method is desirable. We developed forward radiative transfer models for the SSM/I and GOES channels, originally for testing the retrieval algorithms. The visible and near infrared ice scattering information is obtained from geometric ray tracing of fractal ice crystals (Andreas Macke), while the mid-infrared and microwave scattering is computed with Mie scattering. The radiative transfer is performed with the Spherical Harmonic Discrete Ordinate Method (developed by the PI), and infrared molecular absorption is included with the correlated k-distribution method. The SHDOM radiances have been validated by comparison to version 2 of DISORT (the community "standard" discrete-ordinates radiative transfer model), however we use SHDOM since it is computationally more efficient.

Evans, K. Franklin↗
NASA NTRS2006

Improving Lightning NO(x) Parameterizations for Global Chemical Transport Models

Parameterization of lightning NO(x) in global chemical transport models requires a method to specify the temporal and geographic distribution of flash rates, an estimate of NO production per flash, and a method to specify the effective vertical distribution of NO production. Flash rate parameterizations using the upward convective cloud mass flux have been developed and tested for several GCM and assimilated meteorological data sets. This parameterization and others involving the cloud-top height and convective precipitation provide a generally acceptable climatological distribution of flashes after normalization with satellite data. However, considerable improvement in terms of geographic and temporal variability may be achieved in the future using cloud microphysics data available from next-generation GCMs. Cloud-resolving case-study simulations of convective transport and lightning NO production have yielded results which are directly applicable to the NO production per flash and the vertical NO distribution portions of the global model lightning parameterizations. In this work we have used cloud-resolving models (the Goddard Cumulus Ensemble Model (GCE) and MM5) to drive an off-line cloud-scale chemical transport model (CSCTM). The CSCTM, in conjunction with aircraft measurements of NO(x) in thunderstorms and ground-based lightning observations, has been used to constrain the amount of NO produced per flash. Observed lightning flash rates have been incorporated into the CSCTM, and several scenarios of NO production per intracloud (IC) and per cloud-to-ground (CG) flash have been tested in each of several case study storms. The resulting NO(x) mixing ratios are compared with aircraft measurements taken within the storm (typically the anvil region) to determine the most likely NO production scenario. The range of values of NO production per flash (or per meter of lightning channel length) that have been deduced from the model will be shown and compared with values of production in the literature that have been deduced from observed NO spikes and from anvil flux calculations. Results show that on a per flash basis, IC flashes are nearly as productive of NO as CG flashes. Estimates of mean NO production per flash vary by a factor of three from one simulated storm to another. Vertical profiles of lightning NOx mass at the end of the 3-D storm simulations have been summarized to yield suggested profiles for use in global models. These profiles show a larger percentage of the total lightning NO(x) mass in the free troposphere than those suggested by Pickering et al. (1998).

Pickering, Kenneth E.↗
DOE OSTI2023

Rainbows and Climate Change: A tutorial on climate model diagnostics and parameterization

Earth System Models (ESMs) must represent processes below the grid scale of a model using representations (parameterizations) of physical and chemical processes. As a tutorial exercise to understand diagnostics and parameterization, this work presents a representation of rainbows for an ESM: the Community Earth System Model version 2 (CESM2). Using the 'state' of the model, basic physical laws, and some assumptions, we generate a representation of this unique optical phenomena as a diagnostic output. Rainbow occurrence and it's possible changes are related to cloud occurrence and rain formation which are critical uncertainties for climate change prediction. The work highlights issues which are typical of many diagnostics parameterizations such as assumptions, uncertain parameters and the difficulty of evaluation against uncertain observations. Results agree qualitatively with limited available global 'observations' of Rainbows. Rainbows are seen in expected locations in the sub-tropics over the ocean where broken clouds and frequent precipitation occurs. The diurnal peak is in the morning over ocean and in the evening over land. The representation of rainbows is found to be quantitatively sensitive to the assumed amount of cloudiness and the amount of stratiform rain. Rainbows are projected to have decreased, mostly in the Northern Hemisphere, due to aerosol pollution effects increasing cloud coverage since 1850. In the future, continued climate change is projected to decrease cloud cover, associated with a positive cloud feedback. As a result the rainbow diagnostic projects that rainbows will increase in the future, with the largest changes at mid-latitudes. The diagnostic may be useful for assessing cloud parameterizations, and is an exercise in how to build and test parameterizations of atmospheric phenomena.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1998

Coordinated Parameterization Development and Large-Eddy Simulation for Marine and Arctic Cloud-Topped Boundary Layers

The goal of this project was to compare observations of marine and arctic boundary layers with (i) parameterization systems used in climate and weather forecast models, and (ii) two and three dimensional eddy resolving (LES) models for turbulent fluid flow. Based on this comparison, we hoped to better understand, predict, and parameterize the boundary layer structure and cloud amount, type and thickness as functions of large scale conditions that are predicted by global climate models.

Bretherton, Christopher S.↗
NASA NTRS1990

Remote sounding of the tropical cirrus cloud temperature and optical depth using 6.5 and 10.5-micron radiometers during STEP

A dual-channel retrieval technique involving the water vapor band at 6.5 microns and the window region at 10.5 microns has been developed to infer the temperature and emissivity of tropical anvils. This technique has been applied to data obtained from the ER-2 narrow field-of-view radiometers during two flights in the field observation of the Stratosphere-Troposphere Exchange Project near Darwin, Australia, January-February 1987. The retrieved cloud temperatures are between 190 and 240 K, while the cloud emissivities derived from the retrieval algorithm range from about 0.2 to 1. Moreover, the visible optical depths have been obtained from the cloud emissivity through a theoretical parameterization with values of 0.5-10. A significant portion of tropical cirrus clouds are found to have optical depths greater than about 6. Because of the parameterization, the present technique is unable to precisely determine the optical depth values for optically thick cirrus clouds.

Liou, K. N.↗
DOE OSTI2018

Evaluating soil moisture feedback on convective triggering: Roles of convective and land–model parameterizations

Feedbacks between soil moisture and convective precipitation are not well represented in current Earth system models, and can affect projections of drought and heavy-precipitation extremes. To explore the atmospheric and land-surface influences on the initiation (triggering) of daytime deep convection, single-column model experiments were performed using the NCAR Community Earth System Model (CESM1.2), over the U.S. Southern Great Plains. The results indicate that the positive and negative feedback mechanisms found in earlier studies (using simplified boundary-layer models) are robust to large-scale forcing and interactions between boundary-layer turbulence, cloud dynamics, and radiation. However, systematic responses of convective triggering to soil moisture emerged only after switching from a convective available potential energy-based to a convective inhibition energy-based convective parameterization. This suggests that the choice of convective mass-flux closure largely determines the sensitivity of parameterized convective clouds to land-surface state. Errors in land-model parameterizations of evapotranspiration also affect the probability of deep convection, with vegetation (transpiration) playing an important role in linking soil moisture to surface energy partitioning and clouds. Parameterizations that permit the triggering feedback mechanism better predict the statistics of daytime shallow and deep convection, with respect to observations from the Atmospheric Radiation Measurement site in the Southern Great Plains. Here, the results illustrate how errors in the representation of evapotranspiration in land-surface models can propagate through the chain of coupled land-atmosphere processes to affect convective clouds.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

Parameterization of the Vertical Variability of Tropical Cirrus Cloud Microphysical and Optical Properties

Cloud Integrating Nephelometers (CIN) were flown on the U. North Dakota Citation aircraft and the NASA WB-57 aircraft for the purpose of measuring in-situ the optical extinction coefficient and the asymmetry parameter (g) at a wavelength of 635 nm of primarily ice particles encountered during the NASA CRYSTAL-FACE study of large cumulus clouds (Cu) and their anvils found in the southern Florida region. The probes performance was largely successful and produced archived data for vertical profiles of extinction, asymmetry parameter, and effective radius (Re), the latter being obtained by combining CIN and CVI (total water; Oregon State U.) measurements. Composites of the CIN and CVI data describing the average microphysical and optical behavior of the Cu and their anvils showed the following: The extinction increases with height as a result of the size of the particles also decreasing with height as shown by the Re measurements; near the top of anvils the size of the primary ice particles is about 10-um radius; and the value of g does not vary significantly with height and has a mean value of about 0.73 consistent with the idea that ambient ice crystals are primarily of complex shape and reflect solar radiation more efficiently than particles of pristine crystal shape. Other observations include: The g measurements were found to be an indicator of the phase of the cloud permitting identification of the clouds with water droplets, rain, and ice; visual ranges as small as several tens of meters were occasionally found in "extinction cores" that coincided with strong updraft cores; and comparison of the cloud probes on the Citation showed significant disagreement.

Gerber, Hermann E.↗
NASA NTRS2004

Offline GCSS Intercomparison of Cloud-Radiation Interaction and Surface Fluxes

Simulations of deep tropical clouds by both cloud-resolving models (CRMs) and single-column models (SCMs) in the GEWEX Cloud System Study (GCSS) Working Group 4 (WG4; Precipitating Convective Cloud Systems), Case 2 (19-27 December 1992, TOGA-COARE IFA) have produced large differences in the mean heating and moistening rates (-1 to -5 K and -2 to 2 grams per kilogram respectively). Since the large-scale advective temperature and moisture "forcing" are prescribed for this case, a closer examination of two of the remaining external types of "forcing", namely radiative heating and air/sea hear and moisture transfer, are warranted. This paper examines the current radiation and surface flux of parameterizations used in the cloud models participating in the GCSS WG4, be executing the models "offline" for one time step (12 s) for a prescribed atmospheric state, then examining the surface and radiation fluxes from each model. The dynamic, thermodynamic, and microphysical fluids are provided by the GCE-derived model output for Case 2 during a period of very active deep convection (westerly wind burst). The surface and radiation fluxes produced from the models are then divided into prescribed convective, stratiform, and clear regions in order to examine the role that clouds play in the flux parameterizations. The results suggest that the differences between the models are attributed more to the surface flux parameterizations than the radiation schemes.

Tao, W.-K.↗
DOE OSTI2021

A Parameterization of Turbulent Dissipation and Pressure Damping Time Scales in Stably Stratified Inversions, and its Effects on Low Clouds in Global Simulations

Abstract It is difficult for coarse‐resolution global models of the atmosphere to accurately simulate the observed distribution of low clouds. In particular, it is difficult for moist turbulence closure models to simulate sufficiently bright near‐coastal stratocumulus (Sc) without simulating overly bright marine shallow cumuli (Cu). To parameterize bright Sc, a turbulence parameterization must damp the turbulent fluxes of heat and moisture above cloud top in order to prevent excessive entrainment of dry air into cloud top. To parameterize dim shallow Cu, the subgrid variances of temperature and moisture must remain large, in order to permit partial cloudiness. However, damping the fluxes but not the variances just above cloud top is difficult if a parameterization uses a single “master” time scale to damp both. In nature, the above‐cloud fluxes are damped by pressure fluctuations, whereas scalar variances are damped by a different process, namely, turbulent dissipation. In a stably stratified inversion above cloud, pressure damping is large but turbulent dissipation is small. To avoid this problem, a multitime scale parameterization for damping has been developed. The damping parameterization has been implemented in a global model and evaluated. The parameterization is capable of dimming shallow Cu while producing adequately bright Sc.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

The roles of dry convection, cloud-radiation feedback processes and the influence of recent improvements in the parameterization of convection in the GLA GCM

The Goddard Laboratory for Atmospheres GCM is used to study the sensitivity of the simulated July circulation to modifications in the parameterization of dry and moist convection, evaporation from falling raindrops, and cloud-radiation interaction. It is shown that the Arakawa-Schubert (1974) cumulus parameterization and a more realistic dry convective mixing calculation yielded a better intertropical convergence zone over North Africa than the previous convection scheme. It is found that the physical mechanism for the improvement was the upward mixing of PBL moisture by vigorous dry convective mixing. A modified rain-evaporation parameterization which accounts for raindrop size distribution, the atmospheric relative humidity, and a typical spatial rainfall intensity distribution for convective rain was developed and implemented. This scheme led to major improvements in the monthly mean vertical profiles of relative humidity and temperature, convective and large-scale cloudiness, rainfall distributions, and mean relative humidity in the PBL.

Sud, Y.↗