Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “chemical elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Chemical Vapor Deposition of Silicon from Silane Pyrolysis

The four basic elements in the chemical vapor deposition (CVD) of silicon from silane are analytically treated from a kinetic standpoint. These elements are mass transport of silane, pyrolysis of silane, nucleation of silicon, and silicon crystal growth. Rate expressions that describe the various steps involved in the chemical vapor deposition of silicon were derived from elementary principles. Applications of the rate expressions for modeling and simulation of the silicon CVD are discussed.

Praturi, A. K.↗
NASA NTRS1977

Lack of chemical fractionation in major and minor elements during agglutinate formation

Rhodes et al. (1975, 1976) and Adams et al. (1975) have reported that the agglutinate fraction of the soils on the lunar surface displays a marked enrichment in Fe, Mg, Ti, K, and La, and a depletion in Ca, Na, Al, and Eu, relative to the bulk soils. The reported investigation is concerned with a testing of the theory of chemical fractionation involving magnetic separation which was developed in connection with these findings. Soils 64421 and 71501 were sieved and the magnetic fractions separated according to the method developed by Adams and McCord (1973). Analyses of agglutinitic glass did not indicate any appreciable chemical fractionation for the major and minor elements accompanying the agglutination process. It was found that most, if not all fractionations reported can be accounted for completely by the magnetic nonagglutinate impurities in the agglutinate fraction. It is, therefore, concluded that there appears to be no reason to make use of any chemical fractionation theory, whose validity remains to be demonstrated.

Hu, H.-N.↗
NASA NTRS1988

The abundances of elements and isotopes in the solar wind

Studies of the chemical and isotopic composition of the solar wind are reviewed. Solar wind abundance measurements are discussed and solar wind, coronal, and photospheric abundances for elements between H and Fe are presented. Also, consideration is given to the determination of the solar wind isotopic composition of the noble gases using foil collection techniques and the observation of solar wind heavy ions with the mass per charge spectrometer on ISEE-3. Other topics include solar wind observations with solid state detectors, solar wind abundances in the magnetosheath and the plasma sheet, and high-mass resolution measurements of chemical elements and isotopes in the solar wind.

Gloeckler, George↗
DOE OSTI2022

Comprehensive Characterization of Multi-Phase Sulfurized Polyacrylonitrile Cathodes for Lithium-Sulfur Batteries

Sulfurized polyacrylonitrile (SPAN) is considered one of the most promising cathode materials to overcome the operational challenges that plague lithium-sulfur (Li-S) batteries. However, material properties and electrochemical performance implications of SPAN prepared under different synthesis conditions are not yet fully investigated. In this study, we show the impacts of different synthesis conditions on the formation of sulfur to PAN bonds and redox reaction mechanisms of multi-phase SPAN via comprehensive material and electrochemical characterizations. In-situ Raman analysis was first applied to study the multi-phase SPAN-based Li-S cells. We found that both elemental sulfur and chemically bonded sulfur are present under the synthesis condition of 300 degree C/3 h along with unreacted PAN. The incompletely sulfurized, multi-phase SPAN exhibited an unusually rapid capacity degradation in the resultant Li-S cells, which is attributed to polysulfide formation and continuously growing interfacial impedance in the Li-S cells. On the other hand, SPAN samples prepared under the synthesis condition of 350 degree C/3 h are found completely sulfurized with chemically bonded sulfur to the PAN backbone without the presence of free elemental sulfur. Complete sulfurization of SPAN led to exceptionally stable cycle performance due to excellent reversible redox processes of chemically bonded sulfur with Li+ in the Li-S cells.

DIRECT ENERGY CONVERSION,ENERGY STORAGE↗
DOE OSTI2026

Comparing the fluorination of Pb+ and Po+: insights into p-block relativistic effects for superheavy elements

It is expected that the chemical properties of the heaviest of the superheavy elements (SHEs, = 113 – 118) do not align with what is suggested by their current positions on the periodic table. Specifically, the onset of significant relativistic effects, including increased spin–orbit splitting of the p-orbitals may lead to enhanced stability of low-oxidation states. Notably, it is predicted that flerovium ( = 114) may exhibit pseudo-noble gas behavior from a electron configuration that acts as an ‘inert pair’. Even though it is expected that the – splitting becomes pronounced toward the end of the p-block’s sixth row, there is currently limited experimental evidence to confirm its extent or impact. Here, the production of gas-phase lead ( = 82) and polonium ( = 84) fluoride cations (PbF and PoF ) were compared to elucidate differences in accessible oxidation states. The PoF and PbF species were produced and identified with the FIONA spectrometer at the Lawrence Berkeley National Laboratory 88-Inch Cylctron Facility. Polonium showed notably different fluorination chemistry than lead, producing PoF and PoF as primary products compared to lead’s PbF and PbF . The distribution of PoF products observed offer insights as to the role of spin–orbit splitting for polonium. Similar studies of superheavy elements would elucidate the accessibility of their low-oxidation states as well as to inform chemical predictions for eighth-row elements not yet discovered.

Pore, Jennifer L [Nuclear Science Division, Lawren↗
DOE OSTI2020

Colossal oxygen vacancy formation at a fluorite-bixbyite interface

Oxygen vacancies in complex oxides are indispensable for information and energy technologies. There are several means to create oxygen vacancies in bulk materials. However, the use of ionic interfaces to create oxygen vacancies has not been fully explored. As such, we report an oxide nanobrush architecture designed to create high-density interfacial oxygen vacancies. An atomically well-defined (111) heterointerface between the fluorite CeO 2 and the bixbyite Y 2 O 3 is found to induce a charge modulation between Y 3+ and Ce 4+ ions enabled by the chemical valence mismatch between the two elements. Local structure and chemical analyses, along with theoretical calculations, suggest that more than 10% of oxygen atoms are spontaneously removed without deteriorating the lattice structure. Our fluorite–bixbyite nanobrush provides an excellent platform for the rational design of interfacial oxide architectures to precisely create, control, and transport oxygen vacancies critical for developing ionotronic and memristive devices for advanced energy and neuromorphic computing technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

An x ray scatter approach for non-destructive chemical analysis of low atomic numbered elements

A non-destructive x-ray scatter (XRS) approach has been developed, along with a rapid atomic scatter algorithm for the detection and analysis of low atomic-numbered elements in solids, powders, and liquids. The present method of energy dispersive x-ray fluorescence spectroscopy (EDXRF) makes the analysis of light elements (i.e., less than sodium; less than 11) extremely difficult. Detection and measurement become progressively worse as atomic numbers become smaller, due to a competing process called 'Auger Emission', which reduces fluorescent intensity, coupled with the high mass absorption coefficients exhibited by low energy x-rays, the detection and determination of low atomic-numbered elements by x-ray spectrometry is limited. However, an indirect approach based on the intensity ratio of Compton and Rayleigh scattered has been used to define light element components in alloys, plastics and other materials. This XRS technique provides qualitative and quantitative information about the overall constituents of a variety of samples.

Ross, H. Richard↗
DOE OSTI2026

Role of Chemical Disorder in High Temperature Dislocation Glide in Refractory Multi-principal Element Alloys

Refractory multi-principal element alloys (RMPEAs) combine a chemically disordered lattice with a structurally ordered, single‐phase body‐centered cubic (bcc) crystal structure. Chemical fluctuations in these alloys give rise to significant energy barriers that impede dislocation motion. In this study, we use phase field dislocation dynamics to examine how spatial temperature fluctuations compete with randomness in energy barriers to affect the motion of long screw dislocations in three equi-atomic MoNbTa‐based RMPEAs: MoNbTa, MoNbTaW, and MoNbTaVW. Over a wide range of homologous temperatures (T h ≈ 0–0.6), we determined a screw dislocation ‘flow stress’ as the minimum applied stress to sustain continuous motion over a long excursion distance within a fixed timeframe. All three RMPEAs exhibit temperature dependent flow stress with three characteristic glide regimes: at low homologous temperatures, flow stress drops sharply, and screw glide remains planar and rectilinear; at intermediate homologous temperatures, the flow stress levels off as glide becomes planar but wavy; and at high homologous temperatures, flow stress plateaus as screws exhibit nonplanar, three‐dimensional motion. Glide kinetics and transition temperatures are controlled by the chemically induced fluctuations in the energy landscape. The rectilinear to wavy transition temperature is controlled by statistically weakest local barriers in the glide plane, whereas the wavy to 3D transition temperature is governed by statistically strongest local barriers. At low and intermediate homologous temperatures, the relative spread in energy barriers governs glide behavior by controlling the local kinetics of kink pair formation and kink pinning. At high homologous temperatures, the average barrier height governs the glide behavior by controlling the number of out-of-plane excursions during 3D glide. These findings reveal how random chemical fluctuations determine screw‐driven plasticity in RMPEAs, providing critical insight for the design of high temperature structural alloys.

Defects↗
NASA NTRS1996

An Apollo 15 Mare Basalt Fragment and Lunar Mare Provinces

Lunar sample 15474,4 is a tiny fragment of olivine-augite vitrophyre that is a mare basalt. Although petroraphically distinct from all other Apollo 15 samples, it has been ignored since its first brief description. Our new petrographic and mineral chemical data show that the olivines and pyroxenes are distinct from those in other basalts. The basalt cooled and solidified extremely rapidly; some of the olivine might be cumulate or crystallized prior to extrusion. Bulk-chemical data show that the sample is probably similar to an evolved Apollo 15 olivine-normative basalt in major elements but is distinct in its rare earth element pattern. Its chemical composition and petrography both show that 15474,4 cannot be derived from other Apollo 15 mare basalts by shallow-level crystal fractionation. It represents a distinct extrusion of magma. Nonetheless, the chemical features that 15474,4 has in common with other Apollo 15 mare basalts, including the high FeO/Sc, the general similarity of the rare earth element pattern, and the common (and chondritic) TiO2/Sm ratio, emphasize the concept of a geochemical province at the Apollo 15 site that is distinct from basalts and provinces elsewhere. In making a consistent picture for the derivation of all of the Apollo 15 basalts, both the commonalities and the differences among the basalts must be explained. The Apollo 15 commonalities and differences suggest that the sources must have consisted of major silicate phases with the same composition but with varied amounts of a magma trapped from a contemporary magma ocean. They probably had a high olivine/pyroxene ratio and underwent small and reasonably consistent degrees of partial melting to produce the basalts. These inferences may be inconsistent with models that suggest greatly different depths of melting among basalts, primitive sources for the green glasses, or extensive olivine fractionation during ascent. An integrated approach to lunar mare provinces, of which the Apollo 15 mare basalts constitute only one, offers advances in our understanding of the physical and chemical processes of source formation and mare production but has so far not been utilized.

Ryder, Graham↗
NASA NTRS1975

Chemistry of agglutinate fractions in lunar soils

Agglutinates are aggregates of crystalline grains and lithic fragments bonded together by glass. It is thought that glassy agglutinates are formed at the upper surface of the lunar regolith by impact-related melting and welding of soil particles, in response to meteoroid and micrometeoroid bombardment. A description is presented of an investigation in which bulk soils were separated into 'agglutinate' and 'nonagglutinate' fractions. The obtained fractions were analyzed for major, minor, and trace elements. The obtained chemical data for agglutinate and nonagglutinate fractions of lunar soils indicate that agglutinitic glass is enriched in mafic and most lithophile elements relative to the bulk soils. A model involving preferential melting and assimilation of mesostasis material and mafic soil components is proposed to account for the observed chemical data. It is suggested that glassy agglutinates may form more readily in mafic soils than in more feldspathic ones. Such selectivity should be most effective between mare and highland soils, but may possibly operate on a more local scale.

Rhodes, J. M.↗
NASA NTRS1999

History of Ozone Research: From Schonbein to the Present

In 1840, C.F. Schonbein recognized that the smell generated in several different electrical and chemical processes was a single substance. He named this substance "ozein" from the Greek for "to smell". This substance we know today as ozone. Several periods can be distinguished in the continued development of our understanding of ozone. Throughout the late 19th century, the identity and properties of ozone were established and described. Ozone was recognized to be a constituent of normal air and tests were established to measure its concentration. Its disinfectant properties were recognized. New methods were developed for making ozone in the laboratory. In 1879, ultraviolet spectroscopic techniques were applied to the measurement of the solar spectrum and it was discovered by Comu that the spectrum was cut off at about 300 nm wavelength. Hartley suggested, based on laboratory measurements, that this cutoff was due to ozone in the atmosphere which he correctly asserted was somewhere in the upper atmosphere. This began the period of development of the amount and distribution of ozone throughout the atmosphere. In 1930, Chapman put forward the first theory of the formation and destruction of ozone. By the mid-1960s it was becoming obvious that the description of the chemical loss term was inadequate. By the early 1970s the chemical destruction of ozone by the oxides of hydrogen, nitrogen, chlorine, and bromine was recognized as an essential element in the chemical balance determining the ozone concentration. Today, ozone is a broad research project which crosses the boundaries of traditional disciplines. Stratospheric ozone loss due to chlorofluorocarbons is a newsworthy item. The Antarctic ozone hole opens up every spring. The provisions of the Montreal Protocol were agreed upon by countries around the world and promise to reduce the future levels of ozone-destroying chlorine in the stratosphere. Ozone concentrations in polluted cities are a subject of local and national regulations to limit its potential for causing health problems and corrosive effects on materials. A lot is known about ozone but many new questions are still being developed.

Stolarski, Richard S.↗
NASA NTRS1988

Microbeam analysis of four chondritic interplanetary dust particles for major elements, carbon and oxygen

Chemical compositions determined using electron excited X-rays are reported for four interplanetary dust particles collected in the stratosphere. These analyses include measurements of carbon and oxygen abundances which are important elements in these primitive materials. Spot analyses show very heterogeneous compositions on a micrometer scale although average composition approaches that of C1 carbonaceous chondrites. While the spot analyses show intermediate compositions between cometary dust and carbonaceous chondrites, the heterogeneity more closely resembles that of comet Halley dust particles.

Blanford, G. E.↗
DOE OSTI2023

Type Ia Supernova Nucleosynthesis: Metallicity-dependent Yields

Abstract Type Ia supernova explosions (SN Ia) are fundamental sources of elements for the chemical evolution of galaxies. They efficiently produce intermediate-mass (with Z between 11 and 20) and iron group elements—for example, about 70% of the solar iron is expected to be made by SN Ia. In this work, we calculate complete abundance yields for 39 models of SN Ia explosions, based on three progenitors—a 1.4 M ⊙ deflagration detonation model, a 1.0 M ⊙ double detonation model, and a 0.8 M ⊙ double detonation model—and 13 metallicities, with 22 Ne mass fractions of 0, 1 × 10 −7 , 1 × 10 −6 , 1 × 10 −5 , 1 × 10 −4 , 1 × 10 −3 , 2 × 10 −3 , 5 × 10 −3 , 1 × 10 −2 , 1.4 × 10 −2 , 5 × 10 −2 , and 0.1, respectively. Nucleosynthesis calculations are done using the NuGrid suite of codes, using a consistent nuclear reaction network between the models. Complete tables with yields and production factors are provided online at Zenodo:Yields ( https://doi.org/10.5281/zenodo.8060323 ). We discuss the main properties of our yields in light of the present understanding of SN Ia nucleosynthesis, depending on different progenitor mass and composition. Finally, we compare our results with a number of relevant models from the literature.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1986

The abundance and relative volatility of refractory trace elements in Allende Ca,Al-rich inclusions - Implications for chemical and physical processes in the solar nebula

The relative volatilities of lithophile refractory trace elements (LRTE) were determined using calculated 50-percent condensation temperatures. Then, the refractory trace-element abundances were measured in about 100 Allende inclusions. The abundance patterns found in Allende Ca,Al-rich inclusions (CAIs) and ultrarefractory inclusions were used to empirically modify the calculated LRTE volatility sequence. In addition, the importance of crystal-chemical effects, diffusion constraints, and grain transport for the origin of the trace-element chemistry of Allende CAIs (which have important implications for chemical and physical processes in the solar nebula) is discussed.

Kornacki, Alan S.↗
DOE OSTI2022

Measuring Chemical Likeness of Stars with Relevant Scaled Component Analysis

Identification of chemically similar stars using elemental abundances is core to many pursuits within Galactic archeology. However, measuring the chemical likeness of stars using abundances directly is limited by systematic imprints of imperfect synthetic spectra in abundance derivation. We present a novel data-driven model that is capable of identifying chemically similar stars from spectra alone. We call this relevant scaled component analysis (RSCA). RSCA finds a mapping from stellar spectra to a representation that optimizes recovery of known open clusters. By design, RSCA amplifies factors of chemical abundance variation and minimizes those of nonchemical parameters, such as instrument systematics. The resultant representation of stellar spectra can therefore be used for precise measurements of chemical similarity between stars. We validate RSCA using 185 cluster stars in 22 open clusters in the Apache Point Observatory Galactic Evolution Experiment survey. We quantify our performance in measuring chemical similarity using a reference set of 151,145 field stars. We find that our representation identifies known stellar siblings more effectively than stellar-abundance measurements. Using RSCA, 1.8% of pairs of field stars are as similar as birth siblings, compared to 2.3% when using stellar-abundance labels. We find that almost all of the information within spectra leveraged by RSCA fits into a two-dimensional basis, which we link to [Fe/H] and α-element abundances. We conclude that chemical tagging of stars to their birth clusters remains prohibitive. However, using the spectra has noticeable gain, and our approach is poised to benefit from larger data sets and improved algorithm designs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Grain boundary segregation and chemical ordering in CoCrFeMnNi multi-principal element alloy

Owing to their far-from-dilute compositions, multi-principal element alloys (MPEAs) can exhibit unique combinations of engineering properties. As nearly all MPEAs are polycrystalline aggregates, it is necessary to understand the interactions of various elemental species with grain boundaries (GBs). This is of particular importance in extreme environments, such as radiation and elevated temperatures, where such interactions have implications on the properties of MPEAs. Herein, we employ atomistic simulations to generate a series of [001] asymmetric tilt GBs in a model CoCrFeMnNi MPEA and quantify solute interactions and segregation to these boundaries. We employ the Warren-Cowley order parameters to investigate the interplay between GB segregation and chemical short-range order (SRO). At temperatures above 800 K, simulation results reveal the segregation of Cr and Mn to CoCrFeMnNi GBs and show weak dependence of boundary solute excess on GB geometry, at least for the boundaries explored in this work. At temperatures in the range of 673–800 K, formation of domains rich in Cr is observed at GBs in agreement with experimental observations. Quantitative analysis shows that solute excess of various alloying elements decreases rapidly with the increase in temperature in the range of 1000–1200 K. Furthermore, we show that GB regions exhibit SRO characteristics that are distinct from the bulk crystals, leading to spatial variations in SRO. In broad terms, our study highlights the need to account for GB interactions with alloying elements when designing advanced MPEAs with novel chemistries.

Wang, Yitao [Lehigh University, Bethlehem, PA (Uni↗