Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

A correlation between the intrinsic brightness and average decay rate of gamma-ray burst X-ray afterglow light curves

We present a correlation between the average temporal decay (α{sub X,avg,>200s}) and early-time luminosity (L{sub X,200s}) of X-ray afterglows of gamma-ray bursts as observed by the Swift X-ray Telescope. Both quantities are measured relative to a rest-frame time of 200 s after the γ-ray trigger. The luminosity–average decay correlation does not depend on specific temporal behavior and contains one scale-independent quantity minimizing the role of selection effects. This is a complementary correlation to that discovered by Oates et al. in the optical light curves observed by the Swift Ultraviolet Optical Telescope. The correlation indicates that, on average, more luminous X-ray afterglows decay faster than less luminous ones, indicating some relative mechanism for energy dissipation. The X-ray and optical correlations are entirely consistent once corrections are applied and contamination is removed. We explore the possible biases introduced by different light-curve morphologies and observational selection effects, and how either geometrical effects or intrinsic properties of the central engine and jet could explain the observed correlation.

79 ASTRONOMY AND ASTROPHYSICS↗

The NuSTAR Extragalactic Survey: Average Broadband X-Ray Spectral Properties of the NuSTAR-detected AGNs

We present a study of the average X-ray spectral properties of the sources detected by the NuSTAR extragalactic survey, comprising observations of the Extended Chandra Deep Field South (E-CDFS), Extended Groth Strip (EGS), and the Cosmic Evolution Survey (COSMOS). The sample includes 182 NuSTAR sources (64 detected at 8–24 keV), with 3–24 keV fluxes ranging between f{sub 3--24keV}≈10{sup −14} and 6 × 10{sup −13} erg cm{sup −2} s{sup −1} (f{sub 8--24keV}≈3×10{sup −14}--3×10{sup −13} erg cm{sup −2} s{sup −1}) and redshifts in the range of z=0.04--3.21. We produce composite spectra from the Chandra + NuSTAR data (E≈2--40 keV, rest frame) for all the sources with redshift identifications (95%) and investigate the intrinsic, average spectra of the sources, divided into broad-line (BL) and narrow-line (NL) active galactic nuclei (AGNs), and also in different bins of X-ray column density and luminosity. The average power-law photon index for the whole sample is Γ=1.65{sub −0.03}{sup +0.03}, flatter than the Γ≈1.8 typically found for AGNs. While the spectral slope of BL and X-ray unabsorbed AGNs is consistent with the typical values (Γ=1.79{sub −0.01}{sup +0.01}), a significant flattening is seen in NL AGNs and heavily absorbed sources (Γ=1.60{sub −0.05}{sup +0.08} and Γ=1.38{sub −0.12}{sup +0.12}, respectively), likely due to the effect of absorption and to the contribution from the Compton reflection component to the high-energy flux (E>10 keV). We find that the typical reflection fraction in our spectra is R≈0.5 (for Γ=1.8), with a tentative indication of an increase of the reflection strength with X-ray column density. While there is no significant evidence for a dependence of the photon index on X-ray luminosity in our sample, we find that R decreases with luminosity, with relatively high levels of reflection (R≈1.2) for L{sub 10--40keV}<10{sup 44} erg s{sup −1} and R≈0.3 for L{sub 10--40keV}>10{sup 44} erg s{sup −1} AGNs, assuming a fixed spectral slope of Γ=1.8.

79 ASTRONOMY AND ASTROPHYSICS↗

Stochastic Averaging of Radiative Transfer Coefficients for Relativistic Electrons

Abstract Synchrotron emissivities, absorptivities, and Faraday rotation and conversion coefficients are needed in modeling a variety of astrophysical sources, including Event Horizon Telescope (EHT) sources. We develop a method for estimating transfer coefficients that exploits their linear dependence on the electron distribution function, decomposing the distribution function into a sum of parts each of whose emissivity can be calculated easily. We refer to this procedure as stochastic averaging and apply it in two contexts. First, we use it to estimate the emissivity of an isotropicκdistribution function with a high-energy cutoff. The resulting coefficients can be evaluated efficiently enough to be used directly in ray-tracing calculations, and we provide an example calculation. Second, we use stochastic averaging to assess the effect of subgrid turbulence on the volume-averaged emissivity and along the way provide a prescription for a turbulent emissivity. We find that for parameters appropriate to EHT sources turbulence reduces the emissivity slightly. In the infrared, turbulence can dramatically increase the emissivity.

Astronomy & Astrophysics↗

Non-relativistic Free–Free Emission due to the n -distribution of Electrons—Radiative Cooling and Thermally Averaged and Total Gaunt Factors

Tracking the thermal evolution of plasmas, characterized by an n -distribution, using numerical simulations, requires the determination of the emission spectra and of the radiative losses due to free–free emission from the corresponding temperature-averaged and total Gaunt factors. Detailed calculations of the latter are presented and associated with n -distributed electrons with the parameter n ranging from 1 (corresponding to the Maxwell–Boltzmann distribution) to 100. The temperature-averaged and total Gaunt factors with decreasing n tend toward those obtained with the Maxwell–Boltzmann distribution. Radiative losses due to free–free emission in a plasma evolving under collisional ionization equilibrium conditions and composed by H, He, C, N, O, Ne, Mg, Si, S, and Fe ions, are presented. These losses decrease with a decrease in the parameter n , reaching a minimum when n = 1, and thus converge with the loss of thermal plasma. Tables of the thermal-averaged and total Gaunt factors calculated for n -distributions, and a wide range of electron and photon energies, are presented.

79 ASTRONOMY AND ASTROPHYSICS↗

Areal Average Albedo (AREALAVEALB)

he Areal Averaged Albedo VAP yields areal averaged surface spectral albedo estimates from MFRSR measurements collected under fully overcast conditions via a simple one-line equation (Barnard et al., 2008), which links cloud optical depth, normalized cloud transmittance, asymmetry parameter, and areal averaged surface albedo under fully overcast conditions.

54 ENVIRONMENTAL SCIENCES↗

Areal Average Albedo (AREALAVEALBYR)

The Areal Averaged Albedo VAP yields areal averaged surface spectral albedo estimates from MFRSR measurements collected under fully overcast conditions via a simple one-line equation (Barnard et al., 2008), which links cloud optical depth, normalized cloud transmittance, asymmetry parameter, and areal averaged surface albedo under fully overcast conditions.

54 ENVIRONMENTAL SCIENCES↗

Theoretical estimates of the average surface temperature on mars

Estimates of the average surface temperature on Mars are derived from radiative equilibrium considerations. A minimum possible surface temperature is estimated by computing the radiative equilibrium temperature that the Martian surface would have if the planet had no atmosphere. An estimate of the maximum possible value of the average surface temperature is obtained by computing the surface temperature that would result from a maximum greenhouse model. The computations indicate that the average surface temperature is in the range 219K to 233K. Comparisons of the theoretical computations with indications of surface temperature obtained from thermal emission observations are found to be in reasonable agreement.

Surface temperature↗

Numerical averaging in orbit prediction.

This paper is a presentation of some useful aspects of a numerical averaging technique that has been applied with considerable success to the orbit prediction problem for artificial satellites. The method has been tested in a variety of situations wherein the satellite is subjected to combinations of perturbations for which adequate analytic theories are practically impossible. The technique provides many of the advantages of analytic averaging while retaining the ability to simulate the effects of any kind of small force that can be deterministically modeled. The theoretical basis for the method is straightforward but the details of its implementation are somewhat confusing and need some explanation. A particularly useful set of averaged equations is presented along with a description of an efficient algorithm for their solution. Examples of the advantages to be obtained by use of the method are included.

Uphoff, C.↗

The average chemical composition of the lunar surface

The available analytical data from twelve locations on the moon are used to estimate the average amounts of the principal chemical elements (O, Na, Mg, Al, Si, Ca, Ti, and Fe) in the mare, the terra, and the average lunar surface regolith. These chemical elements comprise about 99% of the atoms on the lunar surface. The relatively small variability in the amounts of these elements at different mare (or terra) sites, and the evidence from the orbital measurements of Apollo 15 and 16, suggest that the lunar surface is much more homogeneous than the surface of the earth. The average chemical composition of the lunar surface may now be known as well as, if not better than, that of the solid part of the earth's surface.

Turkevich, A. L.↗

Experimental Investigation of Average Heat-Transfer and Friction Coefficients for Air Flowing in Circular Tubes Having Square-Thread-Type Roughness

An investigation of forced-convection heat transfer and associated pressure drops was conducted with air flowing through electrically heated Inconel tubes having various degrees of square-thread-type roughness, an inside diameter of 1/2 inch, and a length of 24 inches. were obtained for tubes having conventional roughness ratios (height of thread/radius of tube) of 0 (smooth tube), 0.016, 0.025, and 0.037 over ranges of bulk Reynolds numbers up to 350,000, average inside-tube-wall temperatures up to 1950deg R, and heat-flux densities up to 115,000 Btu per hour per square foot. Data The experimental data showed that both heat transfer and friction increased with increase in surface roughness, becoming more pronounced with increase in Reynolds number; for a given roughness, both heat transfer and friction were also influenced by the tube wall-to-bulk temperature ratio. Good correlation of the heat-transfer data for all the tubes investigated was obtained by use of a modification of the conventional Nusselt correlation parameters wherein the mass velocity in the Reynolds number was replaced by the product of air density evaluated at the average film temperature and the so-called friction velocity; in addition, the physical properties of air were evaluated at the average film temperature. The isothermal friction data for the rough tubes, when plotted in the conventional manner, resulted in curves similar to those obtained by other investigators; that is, the curve for a given roughness breaks away from the Blasius line (representing turbulent flow in smooth tubes) at some value of Reynolds number, which decreases with increase in surface roughness, and then becomes a horizontal line (friction coefficient independent of Reynolds number). A comparison of the friction data for the rough tubes used herein indicated that the conventional roughness ratio is not an adequate measure of relative roughness for tubes having a square-thread-type element. The present data, as well as those of other investigators, were used to isolate the influence of ratios of thread height to width, thread spacing to width, and the conventional roughness ratio on the friction coefficient. A fair correlation of the friction data was obtained for each tube with heat addition when the friction coefficient and Reynolds number were defined on the basis of film properties; however, the data for each tube retained the curve characteristic of that particular roughness. The friction data for all the rough tubes could be represented by a single line for the complete turbulence region by incorporating a roughness parameter in the film correlation. No correlation was obtained for the region of incomplete turbulence.

Sams, E. W.↗

Averaged initial Cartesian coordinates for long lifetime satellite studies

A set of initial Cartesian coordinates, which are free of ambiguities and resonance singularities, is developed to study satellite mission requirements and dispersions over long lifetimes. The method outlined herein possesses two distinct advantages over most other averaging procedures. First, the averaging is carried out numerically using Gaussian quadratures, thus avoiding tedious expansions and the resulting resonances for critical inclinations, etc. Secondly, by using the initial rectangular Cartesian coordinates, conventional, existing acceleration perturbation routines can be absorbed into the program without further modifications, thus making the method easily adaptable to the addition of new perturbation effects. The averaged nonlinear differential equations are integrated by means of a Runge Kutta method. A typical step size of several orbits permits rapid integration of long lifetime orbits in a short computing time.

Pines, S.↗

A time-averaged cosmic ray propagation theory

An argument is presented, which casts doubt on our ability to choose an appropriate magnetic field ensemble for computing the average behavior of cosmic ray particles. An alternate procedure, using time-averages rather than ensemble-averages, is presented.

Klimas, A. J.↗

The singly averaged differential equations of satellite motion for e greater than or equal to 0 and less than 1

The singly-averaged differential equations of motion of a satellite are developed in terms of parameters valid for all eccentricities less than one. The perturbations included in the acceleration model are due to an aspherical central planet (zonal harmonics up to degree 20 and resonant harmonics up to degree and order 20), atmospheric drag for a time-varying atmosphere, third-body gravity (the sun and moon for an earth satellite), solar radiation pressure with shadowing, and impulsive maneuvers. Analytic averaging is used to remove short-period terms due to the aspherical central planet and third-body gravity. Numerical averaging is used to remove short-period terms due to atmospheric drag and solar radiation pressure.

Dallas, S. S.↗

Terrestrial kilometric radiation: 3-average spectral properties

A study is presented of the average spectral properties of terrestrial kilometric radiation (TKR) derived from observations made by radio astronomy experiments onboard the IMP-6 and RAE-2 spacecraft. As viewed from near the equatorial plane, TKR is most intense and most often observed in the 21-24 hr local time zone and is rarely seen in the 09-12 hr zone. The peak flux density usually occurs near 240 kHz, but there is evidence that the peak occurs at a somewhat lower frequency on the dayside. The frequency of the peak in the average flux spectrum varies inversely with increasing substorm activity as inferred from the auroral electrojet index (AE) from a maximum near 300 kHz during very quiet times to a minimum below 200 kHz during very disturbed times. The absolute flux levels in the 100-600 kHz TKR band increase significantly with increasing AE. The average power associated with a particular source region seems to decrease rapidly with increasing source altitude.

Kaiser, M. L.↗

On the high correlation between long-term averages of solar wind speed and geomagnetic activity

Six-month and yearly averages of solar-wind speed from 1962 to 1975 are shown to be highly correlated with geomagnetic activity as measured by averages of the Ap index. On the same time scale the correlation between the southward component of the interplanetary magnetic field and geomagnetic activity is poor. Previous studies with hourly averages gave opposite results. The better correlation with the southward component on an hourly time scale is explained by its large variation compared with the relatively constant solar-wind speed. However, on a yearly time scale the magnitude of the variations in both parameters are about the same. This problem can be solved by invoking an energy transfer mechanism which is proportional to the first power of the southward component and a higher power of the solar-wind speed.

Crooker, N. U.↗

A note on the diurnal averaging of aeronomical models

An approximate technique for diurnally time-averaging atmospheric photochemical-dynamical models which eliminates the need for a detailed numerical resolution of sunrise and sunset transitions is developed. The scheme is equivalent to scaling certain chemical rate constants and photodissociation coefficients by appropriate aeronomical factors. To calculate the scaling factors, diurnal variations are parameterized with a step-function behavior, assuming that each species has a constant day-time and night-time concentration whose ratio can be determined by analyzing the chemical interactions occurring after sunset. The solution accounts for the effects of night-time reactions on the 24 h average values of species abundances, and on the average daily rates of the catalytic processes consuming ozone in the stratosphere. The accuracy of the technique is demonstrated by comparing its predictions to those of a full diurnal simulation; typically, the precision is better than 10%. By contrast, it is shown that the use of some other well-known computational schemes can result in significantly larger predictive errors.

Turco, R. P.↗

A note on the averaging method

A simple problem of a two-body system perturbed by the disturbing function epsilon/r-squared is considered to show that the time-averaged equations of the true and mean anomaly are not necessarily equal. Secular effects due to perturbations in the mean and true anomalies are different not only in value but also in sign. A more general case where the disturbing function is periodic with respect to the mean anomaly is also considered. Here a discrepancy in the time-averaged solutions is due to the fact that the mean anomaly is an action-angle variable conjugate to the action variable L, while the true anomaly is not. When the action-angle variables are chosen as dependent variables, the Hamiltonian is a function only of action variables. One must first derive first-order solutions, substitute them into the right-hand side of the equations of motion, and then take time averages.

Kinoshita, H.↗