Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analysis and statistical methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Data handling and analysis for the 1971 corn blight watch experiment

The overall corn blight watch experiment data flow is described and the organization of the LARS/Purdue data center is discussed. Data analysis techniques are discussed in general and the use of statistical multispectral pattern recognition methods for automatic computer analysis of aircraft scanner data is described. Some of the results obtained are discussed and the implications of the experiment on future data communication requirements for earth resource survey systems is discussed.

Anuta, P. E.↗

Stereotactic Body Radiation Therapy and the Influence of Chemotherapy on Overall Survival for Large (≥5 Centimeter) Non-Small Cell Lung Cancer

Purpose: Stereotactic body radiation therapy (SBRT) for ≥5 cm lesions is poorly defined, largely owing to the low sample sizes in existing studies. The present analysis examined the SBRT outcomes and assessed the effect of chemotherapy in this population. Methods and Materials: The National Cancer Data Base was queried for primary non-small cell lung cancer ≥5 cm treated with SBRT (≤10 fractions). Patient, tumor, and treatment parameters were extracted. The primary outcome was overall survival (OS). Statistical methods involved Kaplan-Meier analysis and multivariable Cox proportional hazards modeling. Results: From 2004 to 2012, data from 201 patients were analyzed. The median follow-up was 41.1 months. The median tumor size was 5.5 cm (interquartile range 5.0-6.0), with cT2a, cT2b, and cT3 disease in 24.9%, 53.2%, and 21.9%, respectively. The median total SBRT dose and fractionation was 50 Gy in 4 fractions, and 92.5% of the patients underwent SBRT with ≤5 fractions. The median OS was 25.1 months. Of the 201 patients, 15% received chemotherapy. The receipt of chemotherapy was associated with longer OS (median 30.6 vs 23.4 months; P=.027). On multivariable analysis, worse OS was seen with increasing age (hazard ratio [HR] 1.03; P=.012), poorly differentiated tumors (HR 2.06; P=.049), and T3 classification (HR 2.13; P=.005). On multivariable analysis, chemotherapy remained independently associated with improved OS (HR 0.57; P=.039). Conclusions: SBRT has utility in the setting of tumors ≥5 cm, with chemotherapy associated with improved OS in this subset. These hypothesis-generating data now raise the necessity of performing prospective analyses to determine whether chemotherapy confers outcome benefits after SBRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantifying uncertainty in analysis of shockless dynamic compression experiments on platinum. II. Bayesian model calibration

Dynamic shockless compression experiments provide the ability to explore material behavior at extreme pressures but relatively low temperatures. Typically, the data from these types of experiments are interpreted through an analytic method called Lagrangian analysis. Here, in this work, alternative analysis methods are explored using modern statistical methods. Specifically, Bayesian model calibration is applied to a new set of platinum data shocklessly compressed to 570 GPa. Several platinum equation-of-state models are evaluated, including traditional parametric forms as well as a novel non-parametric model concept. The results are compared to those in Paper I obtained by inverse Lagrangian analysis. The comparisons suggest that Bayesian calibration is not only a viable framework for precise quantification of the compression path, but also reveals insights pertaining to trade-offs surrounding model form selection, sensitivities of the relevant experimental uncertainties, and assumptions and limitations within Lagrangian analysis. The non-parametric model method, in particular, is found to give precise unbiased results and is expected to be useful over a wide range of applications. The calibration results in estimates of the platinum principal isentrope over the full range of experimental pressures to a standard error of 1.6%, which extends the results from Paper I while maintaining the high precision required for the platinum pressure standard.

Brown, Justin Lee↗

Comprehensive End-To-End Design of Novel High Energy Density Materials: III. Fused Heterocyclic Energetic Compounds

In contrast to synthesis and experimental characterization that are usually expensive and time-consuming, a coupled combination of ab initio and group additive theoretical methods represents a powerful alternative to computationally design and characterize new materials with targeted properties. Heterocyclic energetic materials are considered attractive candidates to replace conventional high explosives, such as PETN, RDX, HMX, and TNT. Heterocycles enable an intriguing opportunity for combinatorial design of new classes of energetic materials with targeted performance and sensitivity properties and offer ways for an accurate analysis of structure–property correlations of the materials. By using a computational strategy that links methods of quantum chemistry and semiempirical statistical analysis, we designed, modeled, and characterized a series of novel linear and fused explosive compounds. Proposed materials with best combinations of performance and sensitivity parameters can be now considered as potential candidates for synthesis and experimental characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a Probabilistic Dynamic Synthesis Method for the Analysis of Nondeterministic Structures

Accounting for the statistical geometric and material variability of structures in analysis has been a topic of considerable research for the last 30 years. The determination of quantifiable measures of statistical probability of a desired response variable, such as natural frequency, maximum displacement, or stress, to replace experience-based "safety factors" has been a primary goal of these studies. There are, however, several problems associated with their satisfactory application to realistic structures, such as bladed disks in turbomachinery. These include the accurate definition of the input random variables (rv's), the large size of the finite element models frequently used to simulate these structures, which makes even a single deterministic analysis expensive, and accurate generation of the cumulative distribution function (CDF) necessary to obtain the probability of the desired response variables. The research presented here applies a methodology called probabilistic dynamic synthesis (PDS) to solve these problems. The PDS method uses dynamic characteristics of substructures measured from modal test as the input rv's, rather than "primitive" rv's such as material or geometric uncertainties. These dynamic characteristics, which are the free-free eigenvalues, eigenvectors, and residual flexibility (RF), are readily measured and for many substructures, a reasonable sample set of these measurements can be obtained. The statistics for these rv's accurately account for the entire random character of the substructure. Using the RF method of component mode synthesis, these dynamic characteristics are used to generate reduced-size sample models of the substructures, which are then coupled to form system models. These sample models are used to obtain the CDF of the response variable by either applying Monte Carlo simulation or by generating data points for use in the response surface reliability method, which can perform the probabilistic analysis with an order of magnitude less computational effort. Both free- and forced-response analyses have been performed, and the results indicate that, while there is considerable room for improvement, the method produces usable and more representative solutions for the design of realistic structures with a substantial savings in computer time.

Brown, A. M.↗

Anomaly Detection in Multiple Scale for Insider Threat Analysis

We propose a method to quantify malicious insider activity with statistical and graph-based analysis aided with semantic scoring rules. Different types of personal activities or interactions are monitored to form a set of directed weighted graphs. The semantic scoring rules assign higher scores for the events more significant and suspicious. Then we build personal activity profiles in the form of score tables. Profiles are created in multiple scales where the low level profiles are aggregated toward more stable higherlevel profiles within the subject or object hierarchy. Further, the profiles are created in different time scales such as day, week, or month. During operation, the insider s current activity profile is compared to the historical profiles to produce an anomaly score. For each subject with a high anomaly score, a subgraph of connected subjects is extracted to look for any related score movement. Finally the subjects are ranked by their anomaly scores to help the analysts focus on high-scored subjects. The threat-ranking component supports the interaction between the User Dashboard and the Insider Threat Knowledge Base portal. The portal includes a repository for historical results, i.e., adjudicated cases containing all of the information first presented to the user and including any additional insights to help the analysts. In this paper we show the framework of the proposed system and the operational algorithms.

99 GENERAL AND MISCELLANEOUS↗

Implementing and Evaluating Multithreaded Triad Census Algorithms on the Cray XMT

Commonly represented as directed graphs, social networks depict relationships and behaviors among social entities such as people, groups, and organizations. Social network analysis denotes a class of mathematical and statistical methods designed to study and measure social networks. Beyond sociolo-gy, social network analysis methods are being applied to other types of data in other domains such as bioinformatics, computer networks, national security, and economics. For particular problems, the size of a social network can grow to millions of nodes and tens of millions of edges or more. In such cases, researchers could benefit from the application of social network analysis algorithms on high-performance architectures and systems. The Cray XMT is a third generation multithreaded system based on the Cray XT-3/4 platform. Like most other multithreaded architectures, the Cray XMT is designed to tolerate memory access latencies by switching context between threads. The processors maintain multiple threads of execution and util-ize hardware-based context switching to overlap the memory latency incurred by any thread with the computations from other threads. Due to its memory latency tolerance, the Cray XMT has the poten-tial of significantly improving the execution speed of irregular data-intensive applications such as those found in social network analysis. In this paper, we describe our experiences in developing and optimizing three implementations of a social network analysis method known as triadic analysis to execute on the Cray XMT. The three im-plementations possess different execution complexities, qualities, and characteristics. We evaluate how the various attributes of the codes affect their performance on the Cray XMT. We also explore the effects of different compiler options and execution strategies on the different triadic analysis im-plementations and identify general XMT programming issues and lessons learned.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Data Analysis with Graphical Models: Software Tools

Probabilistic graphical models (directed and undirected Markov fields, and combined in chain graphs) are used widely in expert systems, image processing and other areas as a framework for representing and reasoning with probabilities. They come with corresponding algorithms for performing probabilistic inference. This paper discusses an extension to these models by Spiegelhalter and Gilks, plates, used to graphically model the notion of a sample. This offers a graphical specification language for representing data analysis problems. When combined with general methods for statistical inference, this also offers a unifying framework for prototyping and/or generating data analysis algorithms from graphical specifications. This paper outlines the framework and then presents some basic tools for the task: a graphical version of the Pitman-Koopman Theorem for the exponential family, problem decomposition, and the calculation of exact Bayes factors. Other tools already developed, such as automatic differentiation, Gibbs sampling, and use of the EM algorithm, make this a broad basis for the generation of data analysis software.

Buntine, Wray L.↗

In situ Analysis of Fireworks Using Laser-Induced Breakdown Spectroscopy and Chemometrics

Different types of fireworks are analyzed using the laser-induced breakdown spectroscopy (LIBS) technique. The system employed for spectral acquisition consists of a Nd:YAG laser (532 nm, FWHM = 4 ns) and an Andor Mechelle ME 5000 echelle spectrometer. The presence of Ba, Ca, Mg, Fe, Na, Sr, Si, and Al is identified in the LIBS spectra of different fireworks. These elements can mix easily into the surroundings and thus pollute the environment. In combination with LIBS, multivariate statistical methods, such as principal component analysis and partial least square discriminant analysis, are employed for qualitative classification, regression, and prediction purposes. These methods show good applicability for the classification and prediction of a large data set.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review and statistical analysis of the use of ultrasonic velocity for estimating the porosity fraction in polycrystalline materials

A review and statistical analysis of the ultrasonic velocity method for estimating the porosity fraction in polycrystalline materials is presented. Initially, a semiempirical model is developed showing the origin of the linear relationship between ultrasonic velocity and porosity fraction. Then, from a compilation of data produced by many researchers, scatter plots of velocity versus percent porosity data are shown for Al2O3, MgO, porcelain-based ceramics, PZT, SiC, Si3N4, steel, tungsten, UO2,(U0.30Pu0.70)C, and YBa2Cu3O(7-x). Linear regression analysis produces predicted slope, intercept, correlation coefficient, level of significance, and confidence interval statistics for the data. Velocity values predicted from regression analysis of fully-dense materials are in good agreement with those calculated from elastic properties.

Roth, D. J.↗

Trelliscope: A System for Detailed Visualization in Analysis of Large Complex Data

Visualization plays a critical role in the statistical model building and data analysis process. Data analysts, well-versed in statistical and machine learning methods, visualize data to hypothesize and validate models. These analysts need flexible, scalable visualization tools that are not decoupled from their analysis environment. In this paper we introduce Trelliscope, a visualization framework for statistical analysis of large complex data. Trelliscope extends Trellis, an effective visualization framework that divides data into subsets and applies a plotting method to each subset, arranging the results in rows and columns of panels. Trelliscope provides a way to create, arrange and interactively view panels for very large datasets, enabling flexible detailed visualization for data of any size. Scalability is achieved using distributed computing technologies coupled with . We discuss the underlying principles, design, and scalable architecture of Trelliscope, and illustrate its use on three analysis projects in the domains of proteomics, high energy physics, and power systems engineering.

Hafen, Ryan P.↗

Applications of non-parametric statistics and analysis of variance on sample variances

Nonparametric methods that are available for NASA-type applications are discussed. An attempt will be made here to survey what can be used, to attempt recommendations as to when each would be applicable, and to compare the methods, when possible, with the usual normal-theory procedures that are avavilable for the Gaussion analog. It is important here to point out the hypotheses that are being tested, the assumptions that are being made, and limitations of the nonparametric procedures. The appropriateness of doing analysis of variance on sample variances are also discussed and studied. This procedure is followed in several NASA simulation projects. On the surface this would appear to be reasonably sound procedure. However, difficulties involved center around the normality problem and the basic homogeneous variance assumption that is mase in usual analysis of variance problems. These difficulties discussed and guidelines given for using the methods.

Myers, R. H.↗

Statistical inference of static analysis rules

Various apparatus and methods are disclosed for identifying errors in program code. Respective numbers of observances of at least one correctness rule by different code instances that relate to the at least one correctness rule are counted in the program code. Each code instance has an associated counted number of observances of the correctness rule by the code instance. Also counted are respective numbers of violations of the correctness rule by different code instances that relate to the correctness rule. Each code instance has an associated counted number of violations of the correctness rule by the code instance. A respective likelihood of the validity is determined for each code instance as a function of the counted number of observances and counted number of violations. The likelihood of validity indicates a relative likelihood that a related code instance is required to observe the correctness rule. The violations may be output in order of the likelihood of validity of a violated correctness rule.

Engler, Dawson Richards↗

Deriving the Contribution of Blazars to the Fermi -LAT Extragalactic γ -ray Background at E > 10 GeV with Efficiency Corrections and Photon Statistics

Here, the Fermi Large Area Telescope (LAT) Collaboration has recently released the Third Catalog of Hard Fermi -LAT Sources (3FHL), which contains 1556 sources detected above 10 GeV with seven years of Pass 8 data. Building upon the 3FHL results, we investigate the flux distribution of sources at high Galactic latitudes ($|b| \gt 20^\circ $), which are mostly blazars. We use two complementary techniques: (1) a source-detection efficiency correction method and (2) an analysis of pixel photon count statistics with the one-point probability distribution function (1pPDF). With the first method, using realistic Monte Carlo simulations of the γ-ray sky, we calculate the efficiency of the LAT to detect point sources. This enables us to find the intrinsic source-count distribution at photon fluxes down to 7.5 × 10 –12 ph cm –2 s –1 . With this method, we detect a flux break at (3.5 ± 0.4) × 10 –11 ph cm –2 s –1 with a significance of at least 5.4σ. The power-law indexes of the source-count distribution above and below the break are 2.09 ± 0.04 and 1.07 ± 0.27, respectively. This result is confirmed with the 1pPDF method, which has a sensitivity reach of ~10 –11 ph cm –2 s –1 . Integrating the derived source-count distribution above the sensitivity of our analysis, we find that (42 ± 8)% of the extragalactic γ-ray background originates from blazars.

79 ASTRONOMY AND ASTROPHYSICS↗

Uncertainty Analysis of Inertial Model Attitude Sensor Calibration and Application with a Recommended New Calibration Method

Statistical tools, previously developed for nonlinear least-squares estimation of multivariate sensor calibration parameters and the associated calibration uncertainty analysis, have been applied to single- and multiple-axis inertial model attitude sensors used in wind tunnel testing to measure angle of attack and roll angle. The analysis provides confidence and prediction intervals of calibrated sensor measurement uncertainty as functions of applied input pitch and roll angles. A comparative performance study of various experimental designs for inertial sensor calibration is presented along with corroborating experimental data. The importance of replicated calibrations over extended time periods has been emphasized; replication provides independent estimates of calibration precision and bias uncertainties, statistical tests for calibration or modeling bias uncertainty, and statistical tests for sensor parameter drift over time. A set of recommendations for a new standardized model attitude sensor calibration method and usage procedures is included. The statistical information provided by these procedures is necessary for the uncertainty analysis of aerospace test results now required by users of industrial wind tunnel test facilities.

Tripp, John S.↗

Missing Data and Multiple Imputation: An Unbiased Approach

The default method of dealing with missing data in statistical analyses is to only use the complete observations (complete case analysis), which can lead to unexpected bias when data do not meet the assumption of missing completely at random (MCAR). For the assumption of MCAR to be met, missingness cannot be related to either the observed or unobserved variables. A less stringent assumption, missing at random (MAR), requires that missingness not be associated with the value of the missing variable itself, but can be associated with the other observed variables. When data are truly MAR as opposed to MCAR, the default complete case analysis method can lead to biased results. There are statistical options available to adjust for data that are MAR, including multiple imputation (MI) which is consistent and efficient at estimating effects. Multiple imputation uses informing variables to determine statistical distributions for each piece of missing data. Then multiple datasets are created by randomly drawing on the distributions for each piece of missing data. Since MI is efficient, only a limited number, usually less than 20, of imputed datasets are required to get stable estimates. Each imputed dataset is analyzed using standard statistical techniques, and then results are combined to get overall estimates of effect. A simulation study will be demonstrated to show the results of using the default complete case analysis, and MI in a linear regression of MCAR and MAR simulated data. Further, MI was successfully applied to the association study of CO2 levels and headaches when initial analysis showed there may be an underlying association between missing CO2 levels and reported headaches. Through MI, we were able to show that there is a strong association between average CO2 levels and the risk of headaches. Each unit increase in CO2 (mmHg) resulted in a doubling in the odds of reported headaches.

Foy, M.↗

Uncertainty Analysis of the CE-22 Advanced Nozzle Test Facility

This paper presents methods and results of a detailed measurement uncertainty analysis that was performed for the Advanced Nozzle Test Facility, CE-22, located at the NASA Glenn Research Center. Results for the uncertainty in thrust and flow coefficients, in addition to other variables of interest, are provided. Results are presented separately as random uncertainty (characterizing errors inherent to instrument or measurement environment, impacting repeatability), systematic uncertainty (capturing inaccuracies due to measurement process, calibration, installation effects or other sources which may introduce bias), and total combined uncertainty. The statistical methods and engineering judgments used to estimate elemental uncertainties are described. The analysis tool MANTUS (Measurement Analysis Tool for Uncertainty in Systems) was used to quantify instrumentation system uncertainty, and statistical analysis and engineering judgment were used to quantify other random and systematic uncertainty sources. The Monte Carlo method was used to propagate systematic and random elemental uncertainties to determine the uncertainties of various calculated variables of interest.

data quality↗