Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIND PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

An Evaluation of Measured Pressure Signatures From Wind-Tunnel Models of Three Low-Boom Concepts

Revised 1990-1991 sonic-boom design and analysis methodology was assessed by applying it to the design of three low-boom concepts. Models of these concepts were built and used to measure pressure signatures in the wind tunnel. An analysis of wind-tunnel data showed unexpected nacelle-inlet and the nacelle-wing interference-lift shocks in the pressure signatures from the two engine-under-the-wing models, but not in the measured pressure signatures from the wind-tunnel model with the engine nacelles mounted on the aft fuselage. However, additional lift-induced shocks were found in the pressure signature data from all three wind-tunnel models indicating that other flow-field disturbance effects were present.

Mack, Robert J.↗

A model of the variability of the Venus ionopause altitude

A model for the variability of the Venus ionopause as a function of solar wind dynamic pressure and EUV flux during quiescent solar wind conditions is presented. The radio occultation measurements of the Venus ionopause from Mariner 5, 10 and Venera 9, 10 spacecraft, as well as recent in situ Pioneer Venus measurements are interpreted in terms of this model. An ionospheric model consistent with observations in the 400-1000 km region is predominantly O(+) with densities of about 10,000/cu cm and (T sub e + T sub i) approximately equal to 4500-6500 K. For ionopause measurements below 400 km the ionosphere appears severely compressed and density and temperature profiles cannot be simply described, although a strong correlation with solar wind dynamic pressure is observed. Possible effects of IMF direction switching on the dynamics and structure of the ionosphere are also considered and compared with available ionopause data.

Wolff, R. S.↗

Pervasive large-scale magnetic fields in the Venus nightside ionosphere and their implications

When the solar wind dynamic pressure at Venus was extraordinarily high during the primary mission of the Pioneer Venus Orbiter (PVO), 'disappearing ionospheres' occurred on the nightside, with accompanying pervasive near-periapsis magnetic fields of tens of nanoteslas. These nightside counterparts of the generally horizontal large-scale magnetic fields in the dayside ionosphere are found to exhibit some dependence of field magnitude on the solar wind pressure but not on solar zenith angle. Their statistical behavior suggests a global configuration in which the low-altitude field wraps around the planet, while the field at higher altitudes is draped like the induced magnetotail field. The toroidal low-altitude field geometry implies the possible existence of magnetic x points in the low-altitude wake.

Luhmann, J. G.↗

Studies of the draping and flaring angles of the Mars and Earth magnetotails

Observations of the Mars tail by the spacecraft have been used to estimate the draping angle of the magnetic field within the tail and the boundary flaring angle. The boundary of the tail is defined by the sudden disappearance of the proton flux by the TAUS ion spectrometer. Solar wind measurements by the TAUS instrument are used to calculate the approximate solar wind dynamic pressure when the spacecraft is within the tail boundary. The average draping angle (Acrsin((square root of (B(sub y)(exp 2) + B(sub z)(exp 2)))/B(sub T))) is found to be 27.2 deg +/- 1.4 deg. The draping angle magnitude depends on the solar wind dynamic pressure, but is quite variable. The flaring angle of the tail boundary at X = -2.5 R(sub M) has also been calculated from the balance of pressure between the lobe of the Martian tail and the component pressures of the solar wind. The flaring angle depends strongly on the solar wind dynamic pressure, and this dependence is identical to that obtained at the Earth by Petrinec and Russell. However, the magnitude of the flaring angle at Mars X = -2.5 R(sub M) is one-half the value obtained at Earth for -22.5 R(sub E) is less than or equal to X -10 R(sub E).

Zhang, T.-L.↗

Simultaneous Observations of Traveling Convection Vortices: Ionosphere-Thermosphere Coupling

We present simultaneous observations of magnetosphere-ionosphere-thermosphere coupling over Svalbard during a traveling convection vortex (TCV) event. Various spaceborne and ground-based instruments made coordinated measurements, including magnetometers, particle detectors, an all-sky camera, European Incoherent Scatter (EISCAT) Svalbard Radar, Super Dual Auroral Radar Network (SuperDARN), and SCANning Doppler Imager (SCANDI). The instruments recorded TCVs associated with a sudden change in solar wind dynamic pressure. The data display typical features of TCVs including vortical ionospheric convection patterns seen by the ground magnetometers and SuperDARN radars and auroral precipitation near the cusp observed by the all-sky camera. Simultaneously, electron and ion temperature enhancements with corresponding density increase from soft precipitation are also observed by the EISCAT Svalbard Radar. The ground magnetometers also detected electromagnetic ion cyclotron waves at the approximate time of the TCV arrival. This implies that they were generated by a temperature anisotropy resulting from a compression on the dayside magnetosphere. SCANDI data show a divergence in thermospheric winds during the TCVs, presumably due to thermospheric heating associated with the current closure linked to a field-aligned current system generated by the TCVs. We conclude that solar wind pressure impulse-related transient phenomena can affect even the upper atmospheric dynamics via current systems established by a magnetosphere-ionosphere-thermosphere coupling process.

Kim, Hyomin↗

Solar wind and substorm-related changes in the lobes of the geomagnetic tail

The relationship of the geomagnetic tail lobe energy density to solar wind dynamic pressure, the north-south component of the interplanetary magnetic field, and substorm expansion onsets is investigated. Enhanced lobe energy densities are observed to follow both southward turnings of the interplanetary magnetic field and solar wind dynamic pressure increases. An empirical relationship is developed relating the tail lobe magnetic energy density to the solar wind dynamic pressure by using data obtained when the interplanetary field was northward. Localized, off-center, or multiple-onset substorm expansion phases are shown to have little effect on the lobe magnetic field. A positive correlation is found between magnetosphere-wide substorm expansions and decreases in the lobe energy density. The positive correlation of the energy density with both the solar wind dynamic pressure and a southward interplanetary magnetic field and the positive correlation between magnetospheric substorm activity and lobe energy density decreases are demonstrated to be consistent with a phenomenological model of substorm behavior.

Caan, M. N.↗

Characterization and Uncertainty Analysis of a Reference Pressure Measurement System for Wind Tunnels

This paper presents the calibration results and uncertainty analysis of a high-precision reference pressure measurement system currently used in wind tunnels at the NASA Langley Research Center (LaRC). Sensors, calibration standards, and measurement instruments are subject to errors due to aging, drift with time, environment effects, transportation, the mathematical model, the calibration experimental design, and other factors. Errors occur at every link in the chain of measurements and data reduction from the sensor to the final computed results. At each link of the chain, bias and precision uncertainties must be separately estimated for facility use, and are combined to produce overall calibration and prediction confidence intervals for the instrument, typically at a 95% confidence level. The uncertainty analysis and calibration experimental designs used herein, based on techniques developed at LaRC, employ replicated experimental designs for efficiency, separate estimation of bias and precision uncertainties, and detection of significant parameter drift with time. Final results, including calibration confidence intervals and prediction intervals given as functions of the applied inputs, not as a fixed percentage of the full-scale value are presented. System uncertainties are propagated beginning with the initial reference pressure standard, to the calibrated instrument as a working standard in the facility. Among the several parameters that can affect the overall results are operating temperature, atmospheric pressure, humidity, and facility vibration. Effects of factors such as initial zeroing and temperature are investigated. The effects of the identified parameters on system performance and accuracy are discussed.

Amer, Tahani↗

Monthly mean global climatology of temperature, wind, geopotential height, and pressure for 0 - 120 km

A monthly mean climatology is presented of temperature, wind, and geopotential height with nearly pole-to-pole coverage (80 S to 80 N) for 0 to 210 km, which can be used as a function of altitude and pressure. The purpose is to provide a reference for various atmospheric research and analysis activities. Data sources and methods of computation are described; in general, hydrostatic and thermal wind balance are maintained at all levels and latitudes. As observed in a series of cross-sectional plots, this climatology accurately reproduces most of the characteristic features of the atmosphere such as equatorial wind and the general structure of the tropopause, stratopause, and mesopause. A series of zonal wind profiles is also represented comparing this climatological wind with monthly mean climatological direct wind measurements in the upper mesosphere and lower thermosphere. The temperature and zonal wind climatology at stratospheric levels is compared with corresponding data from the National Meteorological Center, and general agreement is observed between the two data sets. Tables of the climatological values as a function of latitude and height for each month are contained in Appendix B, and are also available in floppy disk.

Fleming, Eric L.↗

Prediction filters for the Dst index and the polar cap potential

The technique of linear prediction filtering is used to create filters relating solar wind parameters to the Dst index and to the polar cap potential. The square root of solar wind dynamic pressure and the solar wind electric field together are found to account for nearly 70 percent of the Dst variance. The prediction filter for the polar cap potential requires the square of the solar wind velocity and the solar wind electric field as inputs. The results suggest that both polar cap potential and ring current injection are primarily controlled by the solar wind, and that substorm expansions do not play a major role in ring current injection.

Fay, R. A.↗

CAP-TSD analysis of the F-15 aircraft

The F-15 fighter aircraft was modeled using Computational Aeroelasticity Program - Transonic Small Disturbance (CAP-TSD). The complete aircraft was modeled including the wing, stabilator, flow through inlets, and fuselage body. CAP-TSD was used to make static pressure runs for Mach numbers of 0.8, 0.9, 0.95 and 1.2. The angle of attack for these runs ranged from 0 to 5 degs. The CAP-TSD program showed good agreement between the computed fuselage and wing pressures and the measured wind tunnel pressures. Including the fuselage and inlets in the CAP-TSD analysis is important and improves the correlation of wing pressures with test data.

Pitt, Dale M.↗

Wind Plant Performance Prediction (WP3) Benchmark Introduction

This presentation outlines the results from the Wind Plant Performance Prediction (WP3) Benchmarking group, which is concentrated on predicted versus actual wind plant performance, honing in on the variables that can cause over-estimation of power generation and subsequent 'under performance.'

17 WIND ENERGY↗

Application of Pressure-Sensitive Paint to Ice-Accreted Wind Tunnel Models

Pressure-sensitive paint (PSP) has been successfully used to measure global surface pressures on an ice-accreted model in an icing wind tunnel at NASA Glenn Research Center. Until now, the PSP technique has been limited to use in normal wind tunnels and clear flight environments. This is the first known application of PSP directly to ice in subfreezing conditions. Several major objectives were achieved in these tests. The procedure for applying the coating in the subfreezing tunnel environment was verified. Inspection of the painted ice surface revealed that the paint did not alter the original ice shape and adhered well over the entire coated area. Several procedures were used to show that the paint responded to changes in air pressure and that a repeatable pressure-dependent calibration could be achieved on the PSP-coated surfaces. Differences in pressure measurements made simultaneously on the ice and the metal test model are not yet fully understood, and techniques to minimize or correct them are being investigated.

Bencic, Timothy J.↗

Aerodynamic load distributions at transonic speeds for a close-coupled wing-canard configuration: Tabulated pressure data

Wind tunnel studies are reported on both the canard and wing surfaces of a model that is geometrically identical to one used in several force and moment tests to provide insight into the various aerodynamic interference effects. In addition to detailed pressures measurements, the pressures were integrated to illustrate the effects of Mach number, canard location, and canard-wing interference on various aerodynamic parameters. Transonic pressure tunnel Mach numbers ranged from 0.70 to 1.20 for data taken from 0 deg to approximately 16 deg angle-of-attack at 0 deg sideslip.

Washburn, K. E.↗

Flight and full-scale wind-tunnel comparison of pressure distributions from an F-18 aircraft at high angles of attack

Pressure distributions were obtained at nearly identical fuselage stations and wing chord butt lines in flight on the F-18 HARV at NASA Dryden Flight Research Center and in the NASA Ames Research Center's 80 by 120 ft wind tunnel on a full-scale F/A-18 aircraft. The static pressures were measured at the identical five stations on the forebody, three stations on the left and right leading-edge extensions, and three spanwise stations on the wing. Comparisons of the flight and wind-tunnel pressure distributions were made at alpha = 30 deg, 45 deg, and 60 deg/59 deg. In general, very good agreement was found. Minor differences were noted at the forebody at alpha = 45 deg and 60 deg in the magnitude of the vortex footprints and a Mach number effect was noted at the leading-edge extension at alpha = 30 deg. The inboard leading edge flap data from the wind tunnel at alpha = 59 deg showed a suction peak that did not appear in the flight data. This was the result of a vortex from the corner of the leading edge flap whose path was altered by the lack of an engine simulation in the wind tunnel.

David F Fisher↗

Construction of Marine Surface Pressure Fields From Scatterometer Winds Alone

A series of six-hourly, synoptic, gridded, global surface wind fields with a resolution of 100 km has been generated using the data set of dealiased Seasat satellite scatterometer (SASS) winds produced as described by peteherych et al. (1984). This paper is an account of the construction of surface pressure fields from these SASS synoptic wind fields only, as carried out by differnt methods, and the comparison of these pressure fields with U.S. National Centers for Environmental Prediction (NCEP) analyses, with the pressure fields of the European Center for Medium Range Weather Forecasting (ECMWF) and with the special analyses of the Gulf of Alaska Experiment (GOASEX).

Marine Surface Pressure↗

Data Fusion in Wind Tunnel Testing; Combined Pressure Paint and Model Deformation Measurements (Invited)

As the benefit-to-cost ratio of advanced optical techniques for wind tunnel measurements such as Video Model Deformation (VMD), Pressure-Sensitive Paint (PSP), and others increases, these techniques are being used more and more often in large-scale production type facilities. Further benefits might be achieved if multiple optical techniques could be deployed in a wind tunnel test simultaneously. The present study discusses the problems and benefits of combining VMD and PSP systems. The desirable attributes of useful optical techniques for wind tunnels, including the ability to accommodate the myriad optical techniques available today, are discussed. The VMD and PSP techniques are briefly reviewed. Commonalties and differences between the two techniques are discussed. Recent wind tunnel experiences and problems when combining PSP and VMD are presented, as are suggestions for future developments in combined PSP and deformation measurements.

Bell, James H.↗