Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

A mesoscale gravity wave event observed during CCOPE. II - Interactions between mesoscale convective systems and the antecedent waves

The interactions between preexisting gravity waves and convective systems were investigated using data obtained by the Cooperative Convection Precipitation Experiment observational network in Montana on July 11-12, 1981. The results indicate that strong convection substantially affects gravity waves locally by augmenting the wave amplitude, reducing its wavelength, distorting the wave shape, altering the wave phase velocity, and greatly weakening the in-phase covariance between the perturbation wind and pressure fields. These convective effects upon gravity waves are explained in terms of hydrostatic and nonhydrostatic pressure forces and gust front processes associated with thunderstorms.

Koch, Steven E.↗

Properties of whistler mode wave packets at the leading edge of steepened magnetosonic waves - Comet Giacobini-Zinner

The physical characteristics of high-frequency wave packets detected at the steepened edge of magnetosonic waves near Comet Giacobini-Zinner are explored, based on an examination of over 45 well-defined events. The results suggest that the wave packets play an important role in the reorientation and reduction in field magnitude from the steepened magnetosonic waves to the upstream ambient field. The observed properties of the wave packets are shown to be consistent with anomalously Doppler-shifted right-hand polarized waves.

Tsurutani, Bruce T.↗

The theory of magnetohydrodynamic wave generation by localized sources. II - Collisionless dissipation of wave packets

The dispersion equation of Barnes (1966) is used to study the dissipation of asymptotic wave packets generated by localized periodic sources. The solutions of the equation are linear waves, damped by Landau and transit-time processes, in a collisionless warm plasma. For the case of an ideal MHD system, most of the waves emitted from a source are shown to cancel asympotically through destructive interference. The modes transporting significant flux to asymptotic distances are found to be Alfven waves and fast waves with theta (the angle between the magnetic field and the characteristics of the far-field waves) of about 0 and about pi/2.

Collins, William↗

Electrostatic lower hybrid waves excited by electromagnetic whistler mode waves scattering from planar magnetic-field-aligned plasma density irregularities

This paper presents a theoretical model for electrostatic lower hybrid waves excited by electromagnetic whistler mode waves propagating in regions of the magnetosphere and the topside ionosphere, where small-scale magnetic-field-aligned plasma density irregularities are thought to exist. In this model, the electrostatic waves are excited by linear mode coupling as the incident electromagnetic whistler mode waves scatter from the magnetic-field-aligned plasma density irregularities. Results indicate that high-amplitude short-wavelength (5 to 100 m) quasi-electrostatic whistler mode waves can be excited when electromagnetic whistler mode waves scatter from small-scale planar magnetic-field-aligned plasma density irregularities in the topside ionosphere and magnetosphere.

Bell, T. F.↗

Upstream waves at Mercury, Venus and earth - Comparison of the properties of one Hertz waves

Previous studies have shown that the Venus foreshock region contains low-frequency upstream waves similar to those in the terrestrial foreshock, but perhaps with different amplitudes than at earth. This paper compares the properties of a second class of upstream waves, analogous to the so-called 1 Hz waves at earth. The waves observed at Mercury, Venus, and earth have very similar properties, i.e., propagation angles less than 55 degrees to the magnetic field and less than 35 degrees to the solar wind flow direction. The waves occur exclusively on the field lines connected to the bow shock. They are most commonly left-hand elliptically polarized with similar fractional amplitudes, approximately 0.1 of the background field strength. Their amplitudes decrease with increasing distance from the shock. The observed frequencies are similar for Mercury, Venus, and earth when scaled by the interplanetary magnetic field. If, as generally assumed at earth, these waves arise in regions of backstreaming electrons, these results imply that similar electron foreshocks occur at earth, Venus and Mercury despite differences in bow shock size and the nature of the obstacle to the solar wind.

Orlowski, D. S.↗

Interference patterns in the Spacelab 2 plasma wave data - Oblique electrostatic waves generated by the electron beam

During the Spacelab 2 mission the University of Iowa's Plasma Diagnostics Package (PDP) explored the plasma environment around the shuttle. Wideband spectrograms of plasma waves were obtained from the PDP at frequencies of 0-30 kHz and at distances up to 400 m from the shuttle. Strong low-frequency (below 10 kHz) electric field noise was observed in the wideband data during two periods in which an electron beam was ejected from the shuttle. This noise shows clear evidence of interference patterns caused by the finite (3.89 m) antenna length. The low-frequency noise was the most dominant type of noise produced by the ejected electron beam. Analysis of antenna interference patterns generated by these waves permits a determination of the wavelength, the direction of propagation, and the location of the source region. The observed waves have a linear dispersion relation very similar to that of ion acoustic waves. The waves are believed to be oblique ion acoustic or high-order ion cyclotron waves generated by a current of ambient electrons returning to the shuttle in response to the ejected electron beam.

Feng, Wei↗

Analytic methods for design of wave cycles for wave rotor core engines

A procedure to design a preliminary wave rotor cycle for any application is presented. To complete a cycle with heat addition there are two separate but related design steps that must be followed. The 'wave' boundary conditions determine the allowable amount of heat added in any case and the ensuing wave pattern requires certain pressure discharge conditions to allow the process to be made cyclic. This procedure, when applied, gives a first estimate of the cycle performance and the necessary information for the next step in the design process, namely the application of a characteristic based or other appropriate detailed one dimensional wave calculation that locates the proper porting around the periphery of the wave rotor. Four examples of the design procedure are given to demonstrate its utility and generality. These examples also illustrate the large gains in performance that could be realized with the use of wave rotor enhanced propulsion cycles.

Resler, Edwin L., Jr.↗

Wave Journal Bearing. Part 2: Experimental Pressure Measurements and Fractional Frequency Whirl Threshold for Wave and Plain Journal Bearings

A new hydrodynamic bearing concept, the wave journal bearing, is being developed because it has better stability characteristics than plain journal bearings while maintaining similar load capacity. An analysis code to predict the steady state and dynamic performance of the wave journal bearing is also part of the development. To verify numerical predictions and contrast the wave journal bearing's stability characteristics to a plain journal bearing, tests were conducted at NASA Lewis Research Center using an air bearing test rig. Bearing film pressures were measured at 16 ports located around the bearing circumference at the middle of the bearing length. The pressure measurements for both a plain journal bearing and a wave journal bearing compared favorably with numerical predictions. Both bearings were tested with no radial load to determine the speed threshold for self-excited fractional frequency whirl. The plain journal bearing started to whirl immediately upon shaft start-up. The wave journal did not incur self-excited whirl until 800 to 900 rpm as predicted by the analysis. Furthermore, the wave bearing's geometry limited the whirl orbit to less than the bearing's clearance. In contrast, the plain journal bearing did not limit the whirl orbit, causing it to rub.

Walker, James F.↗

Generation of pseudo-waves in the middle atmosphere by flow accelerations due to breaking gravity waves?

Low frequency, large amplitude waves are often observed at mesospheric heights in radar and lidar wind measurements. A series of individual profiles of 1-hr averages of velocity data that were taken in October 1981 using the MST radar at Poker Flat, Alaska are presented. The vertical wavelength of this wave-like event is about 15 km and has a period close to 10 hours. A clear downward phase propagation can be seen, and so these oscillations are usually, and probably correctly, interpreted as being gravity wave flow perturbations. We investigate an alternative explanation that may also be possible; specifically, we investigate the possibility that the perturbed flow is a pseudo-wave structure produced by mean flow acceleration due to gravity waves propagating upward from below and breaking in the mesosphere. The question is whether effects similar to those that produce the much longer period Quasi-Biennial Oscillation (QBO) in the equatorial stratosphere can produce mesospheric pseudo-waves (MPW) at much shorter periods.

Jacobson, Raymond A.↗

Plasma Waves Observed in the Cusp Turbulent Boundary Layer: An Analysis of High Time Resolution Wave and Particle Measurements from the Polar Spacecraft

The boundary layer located in the cusp and adjacent to the magnetopause is a region that is quite turbulent and abundant with waves. The Polar spacecraft's orbit and sophisticated instrumentation are ideal for studying this region of space. Our analysis of the waveform data obtained in this turbulent boundary layer shows broadband magnetic noise extending up to a few kilohertz (but less than the electron cyclotron frequency); sinusoidal bursts (a few tenths of a second) of whistler mode waves at around a few tens of hertz, a few hundreds of hertz, and just below the electron cyclotron frequency; and bipolar pulses, interpreted as electron phase-space holes. In addition, bursts of electron cyclotron harmonic waves are occasionally observed with magnetic components. We show evidence of broadband electrostatic bursts covering a range of approx. 3 to approx. 25 kHz (near but less than the plasma frequency) occurring in packets modulated at the frequency of some of the whistler mode waves. On the basis of high time resolution particle data from the Polar HYDRA instrument, we show that these bursts are consistent with generation by the resistive medium instability. The most likely source of the whistler mode waves is the magnetic reconnection site closest to the spacecraft, since the waves are observed propagating both toward and away from the Earth, are bursty, which is often the case with reconnection, and do not fit on the theoretical cold plasma dispersion relation curve.

Pickett, J. S.↗

An Operator Method for Field Moments from the Extended Parabolic Wave Equation and Analytical Solutions of the First and Second Moments for Atmospheric Electromagnetic Wave Propagation

The extended wide-angle parabolic wave equation applied to electromagnetic wave propagation in random media is considered. A general operator equation is derived which gives the statistical moments of an electric field of a propagating wave. This expression is used to obtain the first and second order moments of the wave field and solutions are found that transcend those which incorporate the full paraxial approximation at the outset. Although these equations can be applied to any propagation scenario that satisfies the conditions of application of the extended parabolic wave equation, the example of propagation through atmospheric turbulence is used. It is shown that in the case of atmospheric wave propagation and under the Markov approximation (i.e., the delta-correlation of the fluctuations in the direction of propagation), the usual parabolic equation in the paraxial approximation is accurate even at millimeter wavelengths. The comprehensive operator solution also allows one to obtain expressions for the longitudinal (generalized) second order moment. This is also considered and the solution for the atmospheric case is obtained and discussed. The methodology developed here can be applied to any qualifying situation involving random propagation through turbid or plasma environments that can be represented by a spectral density of permittivity fluctuations.

Manning, Robert M.↗

The Virtual Wave Observatory (VWO): A Portal to Heliophysics Wave Data

The Virtual Wave Observatory (VWO) is one of the discipline-oriented virtual observatories that help form the nascent NASA Heliophysics Data environment to support heliophysics research. It focuses on supporting the searching and accessing of distributed heliophysics wave data and information that are available online. Since the occurrence of a natural wave phenomenon often depends on the underlying geophysical -- i.e., context -- conditions under which the waves are generated and propagate, and the observed wave characteristics can also depend on the location of observation, VWO will implement wave-data search-by-context conditions and location, in addition to searching by time and observing platforms (both space-based and ground-based). This paper describes the VWO goals, the basic design objectives, and the key VWO functionality to be expected. Members of the heliophysics community are invited to participate in VWO development in order to ensure its usefulness and success.

Fung, Shing F.↗

Phase Coupling in Langmuir Wave Packets: Evidence for Four Wave Interactions in Solar Type III Radio Bursts

The four wave interaction process, known as the oscillating two stream instability (OTSI) is considered as one of the mechanisms responsible for stabilizing the electron beams associated with solar type III radio bursts. It has been reported that (1) an intense localized Langmuir wave packet associated with a type III burst contains the spectral characteristics of the OTSI: (a) a resonant peak at the local electron plasma frequency, f(sub pe), (b) a Stokes peak at a frequency slightly lower than f(sub pe), (c) anti-Stokes peak at a frequency slightly higher than f(sub pe), and (d) a low frequency enhancement below a few hundred Hz, (2) the frequencies and wave numbers of these spectral components satisfy the resonance conditions of the OTSI, and (3) the peak intensity of the wave packet is well above the thresholds for the OTSI as well as spatial collapse of envelope solitons. Here, for the first time, applying the trispectral analysis on this wave packet, we show that the tricoherence, which measures the degree of coherent four-wave coupling amongst the observed spectral components exhibits a peak. This provides an additional evidence for the OTSI and related spatial collapse of Langmuir envelope solitons in type III burst sources.

Thejappa, G.↗

A staggered-grid finite-difference scheme optimized in the time–space domain for modeling scalar-wave propagation in geophysical problems

For modeling scalar-wave propagation in geophysical problems using finite-difference schemes, optimizing the coefficients of the finite-difference operators can reduce numerical dispersion. Most optimized finite-difference schemes for modeling seismic-wave propagation suppress only spatial but not temporal dispersion errors. We develop a novel optimized finite-difference scheme for numerical scalar-wave modeling to control dispersion errors not only in space but also in time. Our optimized scheme is based on a new stencil that contains a few more grid points than the standard stencil. We design an objective function for minimizing relative errors of phase velocities of waves propagating in all directions within a given range of wavenumbers. Dispersion analysis and numerical examples demonstrate that our optimized finite-difference scheme is computationally up to 2.5 times faster than the optimized schemes using the standard stencil to achieve the similar modeling accuracy for a given 2D or 3D problem. Compared with the high-order finite-difference scheme using the same new stencil, our optimized scheme reduces 50 percent of the computational cost to achieve the similar modeling accuracy. This new optimized finite-difference scheme is particularly useful for large-scale 3D scalar-wave modeling and inversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pseudo-spectral control of a novel oscillating surge wave energy converter in regular waves for power optimization including load reduction

The aim of this study is to describe a procedure to maximize the power-to-load ratio of a novel wave energy converter (WEC) that combines an oscillating surge wave energy converter with variable structural components. The control of the power-take-off torque will be on a wave-to-wave timescale, whereas the structure will be controlled statically such that the geometry remains the same throughout the wave period. Linear hydrodynamic theory is used to calculate the upper and lower bounds for the time-averaged absorbed power and surge foundation loads while assuming that the WEC motion remains sinusoidal. Previous work using pseudo-spectral techniques to solve the optimal control problem focused solely on maximizing absorbed energy. This work extends the optimal control problem to include a measure of the surge foundation force in the optimization. The objective function includes two competing terms that force the optimizer to maximize power capture while minimizing structural loads. A penalty weight was included with the surge foundation force that allows control of the optimizer performance based on whether emphasis should be placed on power absorption or load shedding. Results from pseudo-spectral optimal control indicate that a unit reduction in time-averaged power can be accompanied by a greater reduction in surge-foundation force.

16 TIDAL AND WAVE POWER↗

Slow Wave Propagation and Sheath Interaction for ICRF Waves in the Tokamak SOL

In previous work we studied the propagation of slow-wave resonance cones launched parasitically by a fast-wave antenna into a tenuous magnetized plasma. Here we extend the previous calculation to ''dense'' scrape-off-layer (SOL) plasmas where the usual slow wave is evanescent. Using the sheath boundary condition, it is shown that for sufficiently close limiters, the slow wave couples to a sheath plasma wave and is no longer evanescent, but radially propagating. A self-consistent calculation of the rf-sheath width yields the resulting sheath voltage in terms of the amplitude of the launched SW, plasma parameters and connection length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear and nonlinear Landau resonance of kinetic Alfven waves: Consequences for electron distribution and wave spectrum in the solar wind

Kinetic Alfven wave turbulence in solar wind is considered and it is shown that non-Maxwellian electron distribution function has a significant effect on the dynamics of solar wind plasmas. Linear Landau damping leads to the formation of a plateau in the parallel electron distribution function which diminishes the Landau damping rate significantly. Nonlinear scattering of waves by plasma particles is generalized to short wavelengths and it is found that for the solar wind parameters this scattering is the dominant process as compared to three-wave decay and coalescence in the wave vector range 1/{rho}{sub i}<k<{omega}{sub pe}/c. Incorporation of these effects leads to the steepening of the wave spectrum between the inertial and the dissipation ranges with a spectral index between 2 and 3. This region can be labeled as the scattering range. Such steepening has been observed in the solar wind plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗