SEARCH · Engineering Papers

Results for “Vertical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Estimates of the seasonal mean vertical velocity fields of the extratropical Northern Hemisphere

Indirect methods are employed to estimate the wintertime and summertime mean vertical velocity fields of the extratropical Northern Hemisphere and intercomparisons are made, together with comparisons with mean seasonal patterns of cloudiness and precipitation. Twice-daily NMC operational analyses produced general circulation statistics for 11 winters and 12 summers, permitting calculation of the seasonal NMC averages for 6 hr forecasts, solution of the omega equation, integration of continuity equation downward from 100 mb, and solution of the thermodynamic energy equation in the absence of diabatic heating. The methods all yielded similar vertical velocity patterns; however, the magnitude of the vertical velocities could not be calculated with great accuracy. Orography was concluded to have less of an effect in summer than in winter, when winds are stronger.

White, G. H.↗

NASA NTRS1983

Techniques for studying gravity waves and turbulence: Vertical wind speed power spectra from the troposphere and stratosphere obtained under light wind conditions

A joint France/U.S. experiment was conducted near the mouth of the Rhone river in southern France as part of the ALPEX program. This experiment used 3 vertically directed 50 MHz radars separated by 4 to 6 km. The main purpose of this experiment was to study the spatial characteristics of gravity waves. The good height resolution (750 meters) and time resolution (1 minute) and the continuous operation over many weeks have yielded high resolution vertical wind speed power spectra under a variety of synoptic conditions. Vertical spectra obtained during very quiet (low wind) conditions in the troposphere and lower stratosphere from a single site are presented.

Ecklund, W. L.↗

NASA NTRS1984

Vertical ascent from earth to geosynchronous orbit

The concept of ascending vertically from the equator on earth to the point in geosynchronous orbit directly above was investigated. The gravity losses were found to be so great that vertical ascent is not practical with only chemical-rocket propulsion. With laser propulsion, propellant requirements with vertical ascent are reduced and might allow the use of single-stage vehicles from earth to geosynchronous orbit. Combined or composite chemical and laser propulsion is shown to be useful. A gravity ladder suspended from geosynchronous orbit part of the distance to earth is shown to reduce the vehicle propulsion requirements.

Martin, J. A.↗

NASA NTRS1983

Generation and evoluation of near-optimum vertical flight profiles

The overall objectives of this research effort have been to develop and evaluate algorithms and flight management concepts for minimization of fuel or direct operating costs. These concepts are to be used for flight planning or for on-board computation and steering of turbojet transport aircraft in the vertical path. Within this research context, a computer program, called OPTIM, has been developed to use these algorithms to generate near-optimum vertical reference profiles. OPTIM contains control options to examine effects of various flight constraints on cost performance. A companion program, called TRAGEN, was developed to simulate an aircraft flying along a given vertical reference profile. TRAGEN is used to verify OPTIM's output , to examine the effects of parameter value uncertainty (such as prevailing wind), and to compare cost performance of profiles generated by different techniques. This paper describes OPTIM and TRAGEN and presents examples of the programs utility.

Sorensen, J. A.↗

NASA NTRS1984

The vertical structure and stability of alpha model accretion disks

In order to understand the physical processes that determine the time-dependent characteristics of accretion disks, a parameter investigation is conducted of the vertically explicit structure corresponding to steady state, alpha-model thin disk accretion for accreting objects of 1 solar mass. Attention is given to the role of convection in the vertical structure and the location of critical points representing the onset of thermal instability, as well as optically thin conditions. It is shown that the temperature in quiescence is likely to be low for most of the matter, and scaling laws are presented for the fundamental properties of the vertically explicit models from which the time scales for various idealized phenomena are derived. The ordering of three disk time scales obtained should allow discrimination among different models.

Cannizzo, J. K.↗

NASA NTRS1985

Impacts of Space Shuttle thermal protection system tile on F-15 aircraft vertical tile

Impacts of the space shuttle thermal protection system (TPS) tile on the leading edge and the side of the vertical tail of the F-15 aircraft were analyzed under different TPS tile orientations. The TPS tile-breaking tests were conducted to simulate the TPS tile impacts. It was found that the predicted tile impact forces compare fairly well with the tile-breaking forces, and the impact forces exerted on the F-15 aircraft vertical tail were relatively low because a very small fraction of the tile kinetic energy was dissipated in the impact, penetration, and fracture of the tile. It was also found that the oblique impact of the tile on the side of the F-15 aircraft vertical tail was unlikely to dent the tail surface.

Ko, W. L.↗

NASA NTRS1985

Development and Testing of the Variable Vertical Resolution Fourth Order GCM

The vertical coordinate of the Fourth Order Model has been generalized so that the model can now run with an arbitrary number of vertical layers and so that the thicknesses of these layers can be arbitrarily specified (in the sigma coordinate). This Variable Vertical Resolution (VVR) version of the Fourth Order Model will soon replace the current production model. To assess the skill of the VVR model, it has been run with 9 equally spaced layers and compared with the current production model. In two Northern Hemispheric winter cases and one summer case, the two models were virtually identical in forecast skill for 6 to 7 days. After that the VVR model was slightly better in the winter cases and the production model was slightly better in the summer case. The only exception to this was that after 2 days the production model gave slightly more skillful 500 mb forecasts in the tropics for the summer case.

Helfand, H. M.↗

NASA NTRS1984

Estimation of vertical diffusion from observations of Atmospheric turbulence layers, part 4.4B

There have been numerous studies addressing the turbulent diffusion in the stratosphere and mesosphere during the last two decades. The motivation for such studies was the need for an understanding of the thermal and constituent structure of the middle atmosphere. Observational estimates of the horizontal and/or vertical diffusion were obtained using chemical release, rocket vapor trail, aircraft, balloon, and radar techniques. During the same period, a number of theoretical studies were performed to infer the level of vertical diffusion needed to account for observed constituent profiles. There appears to be a discrepancy between the level of vertical diffusion required for the dissipation of gravity wave and tidal motions on the one hand and for the maintenance of observed temperature and constituent profiles on the other. A possible explanation of this discrepancy is outlined. Measurements that may help verify this explanation are suggested.

Fritts, D. C.↗

NASA NTRS1985

A simple model for the interaction between vertical eddy heat fluxes and static stability

A numerical model for studying the interaction of vertical eddy heat fluxes and vertical temperature structure in midlatitude regions is described. The temperature profile for the model was derived from calculations of the equilibrium among heating rates in simplified representations of large-scale vertical eddy heat flux, moist convection and radiation. An eddy flux profile is calculated based on the quasi-geostrophic, liner baroclinic instability of a single wave. Model equilibrium states for summer and winter conditions are compared with observations, and the results are discussed in detail.

Gutowski, W. J., Jr.↗

NASA NTRS1985

Numerical solution of the vertical structure equation in the normal mode method

In the present model of multilayered stability stratification, aimed at obtaining the analytic eigensolutions of the vertical structure equation, each layer is characterized by its own static stability value. By requiring continuity of pressure and vertical velocity across each interface level, and by imposing suitable upper and lower boundary conditions, matching eigensolutions are obtained in terms of the Bessel functions. Attention is given to an explicit example of a double-layered stratified atmosphere which demonstrates the mathematical manipulations involved; the resultant vertical structure functions are used to check the accuracy of the numerical solutions by the finite difference and finite element methods.

Sasaki, Y. K.↗

NASA NTRS1985

Mobile VLBI and GPS measurement of vertical crustal motion

Mobile Very Long Base Interferometry (VLBI) and Global Positioning System (GPS) geodetic measurements have many error sources in common. Calibration of the effects of water vapor on signal transmission through the atmosphere, however, remains the primary limitation to the accuracy of vertical crustal motion measurements made by either technique. The two primary methods of water vapor calibration currently in use for mobile VLBI baseline measurements were evaluated: radiometric measurements of the sky brightness near the 22 GHz emission line of free water molecules and surface meteorological measurements used as input to an atmospheric model. Based upon a limited set of 9 baselines, it is shown that calibrating VLBI data with water vapor radiometer measurements provides a significantly better fit to the theoretical decay model than calibrating the same data with surface meteorological measurements. The effect of estimating a systematic error in the surface meteorological calibration is shown to improve the consistency of the vertical baseline components obtained by the two calibration methods. A detailed error model for the vertical baseline components obtained indicates current mobile VLBI technology should allow accuracies of order 3 cm with WVR calibration and 10 cm when surface meteorological calibration is used.

Kroger, P. M.↗

NASA NTRS1985

Hydraulic induced instability on a vertical service

The case history contained provides insight toward the mechanical and hydraulic behavior of a vertical pump. It clearly demonstrates the need for measurements on the rotor at or near the impeller area. The results are reported of an analysis on a service water pump. This pump is typical of the water pumps used throughout the power generation industry. Although little is known of the mechanical behavior of vertical pumps because of difficulty in modeling the rotor system, recent developments in the application of submersible proximity transducers have made possible the measurement of pump dynamics under operating conditions. The purpose of this study was to determine the proper selection and installation of vibration-monitoring transducers as well as to measure the effects of imbalance, misalignment, and hydraulics on the performance and reliability of vertical pumps. In addition, the cause of shaft failures on this pump was to be determined.

Bosmans, R. F.↗

NASA NTRS1986

Vertical distribution of ozone and the variation of tropopause heights based on ozonesonde and satellite observations

The distribution of atmospheric ozone is nonuniform both in space and time. Local ozone concentration vary with altitude, latitude, longitude, and season. Two year ozonesonde data, January 1981 to December 1982, observed at four Canadian stations and 2.5 year backscattered ultraviolet experiment data on the Nimbus-4 satellite, April 1970 to August 1972, observed over five American stations were used to study the relationship between the total ozone, vertical height distribution of the ozone mixing ratio, vertical height distribution of half total ozone, and the local tropopause height. The results show that there is a postive correlation between total ozone in Dobson Units and the tropopause height in terms of atmospheric pressure. This result suggests that local intrusion of the statosphere into the troposphere, or the local decreasing of tropopause height could occur if there is a local increasing of total ozone. A comparison of the vertical height distribution of the ozone mixing ratio, the modified pressure height of half total ozone and the tropopause height shows that the pressure height of an ozone mixing ratio of 0.3 micrograms/g, and the modified pressure height of half total ozone are very well correlated with the tropopause pressure height.

Hung, R. J.↗

NASA NTRS1985

The Rapid-Sampling Vertical Profiler - An evaluation

Evaluation of the Rapid-Sampling Vertical Profiler, which was developed for sampling the hydrophysical fields in the upper ocean from a moving vessel, shows that the instrument is useful for near-microscale measurements of temperature and salinity and also for turbulent kinetic energy dissipation measurements with airfoil probes. A depth of 200 meters is reached from a ship moving at 6 knots. The vertical resolution is 3 cm, the temperature resolution is 0.5 millidegrees, the salinity resolution is 0.6 parts per million, and the sigma-t resolution is 0.0004. (The estimates given for resolution are 99 percent confidence limits on series of 3-cm samples.) The instrument falls with a speed uniform within 20 percent in an orientation within a few degrees of vertical. Vibrations within the dissipation range of turbulence are sufficiently small to permit the measurement of turbulence with airfoil probes in many regions of the ocean.

Caldwell, D. R.↗

NASA NTRS1986

Determination of the Brunt-Vaisala frequency from vertical velocity spectra

Recent work on the spectra of vertical velocity oscillations due to gravity waves in the troposphere, stratosphere and the mesosphere has revealed a typical feature which we call the Brunt-Vaisala cutoff. Several observers noticed a spectral peak near the Brunt-Vaisala frequency. This peak often is characterized by a very steep slope at the high frequency part, but a fairly shallow slope towards lower frequencies. Some example spectra of stratosphere observations are given. This distinct spectral shape (most clear at the upper height 22.5 km) can be explained by the fact that the vertical velocity amplitudes of atmospheric gravity waves increase with frequency up to their natural cutoff at the Brunt-Vaisala frequency. The measurement of the frequency of the peak in a vertical velocity spectrum was found to yield most directly the Brunt-Vaisala-frequency profile. Knowing the Brunt-Vaisala frequency profile, one can deduce the potential temperature profile, if one has a calibration temperature at one height. However, even the uncalibrated profile will be quite useful, e.g., to determine fronts (defined by temperature inversions) and the tropopause height. This method fails for superadiabatic lapse rates when the Brunt-Viasala frequency is imaginary. The application of this method will also be difficult when the wind velocity is too high, causing the Doppler effect to smear out the total spectrum and blur the Brunt-Vaisala cutoff. A similar deficiency will also appear if the gravity-wave distribution has a maximum in wind direction.

Rottger, J.↗

NASA NTRS1986

Vertical normal modes of a mesoscale model using a scaled height coordinate

Vertical modes were derived for a version of the Colorado State Regional Atmospheric Mesoscale Modeling System. The impacts of three options for dealing with the upper boundary of the model were studied. The standard model formulation holds pressure constant at a fixed altitude near the model top, and produces a fastest mode with a speed of about 90 m/sec. An alternative formulation, which allows for an external mode, could require recomputation of vertical modes for every surface elevation on the horizontal grid unless the modes are derived in a particular way. These results have bearing on the feasibility of applying vertical mode initialization to models with scaled height coordinates.

Lipton, A. E.↗

NASA NTRS1986

Mobile very long baseline interferometry and Global Positioning System measurement of vertical crustal motion

Kroger, Peter M.↗

NASA NTRS1986

Precision of vertical position estimates from very long baseline interferometry

It is found that the precision of VLBI measurements of vertical crustal motions is limited by errors in the modeling of the propagation delay through the earth's neutral atmosphere, and by errors in finding the orientation of a fixed crust coordinate system in the VLBI reference frame. The repeatability of baseline length measurements study indicates a vertical position precision of about 8 cm, averaged over 13 sites and 4.5 years of data, while the repeatability of vertical position estimates for a Richmond, FL site is found to yield a precision of about 7 cm for 42 observations made over an 11-month period. An overall precision of 8 cm for a 24-hour VLBI observing session is obtained, and the effects of earth orientation parameter errors is contingent on the distances between the VLBI sites.

Herring, T. A.↗