Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

High-performance ultraviolet detection and visible-blind photodetector based on Cu{sub 2}O/ZnO nanorods with poly-(N-vinylcarbazole) intermediate layer

This study reports a high-performance hybrid ultraviolet (UV) photodetector with visible-blind sensitivity fabricated by inserting a poly-(N-vinylcarbazole) (PVK) intermediate layer between low-cost processed Cu{sub 2}O film and ZnO nanorods (NRs). The PVK layer acts as an electron-blocking/hole-transporting layer between the n-ZnO and p-Cu{sub 2}O films. The Cu{sub 2}O/PVK/ZnO NR photodetector exhibited a responsivity of 13.28 A/W at 360 nm, a high detectivity of 1.03 × 10{sup 13} Jones at a low bias of −0.1 V under a low UV light intensity of 24.9 μW/cm{sup 2}. The photo-to-dark current ratios of the photodetector with and without the PVK intermediate layer at a bias of −0.5 V are 1.34 × 10{sup 2} and 3.99, respectively. The UV-to-visible rejection ratios (R{sub 360 nm}/R{sub 450 nm}) are 350 and 1.735, respectively. Several features are demonstrated: (a) UV photo-generated holes at the ZnO NRs can effectively be transported through the PVK layer to the p-Cu{sub 2}O layer; (b) the insertion of a PVK buffer layer significantly minimizes the reverse-bias leakage current, which leads to a larger amplification of the photocurrent; and (c) the PVK buffer layer greatly improves the UV-to-visible responsivity ratio, allowing the device to achieve high UV detection sensitivity at a low bias voltage using a very low light intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

BInGaN alloys nearly lattice-matched to GaN for high-power high-efficiency visible LEDs

InGaN-based visible light-emitting diodes (LEDs) find commercial applications for solid-state lighting and displays, but lattice mismatch limits the thickness of InGaN quantum wells that can be grown on GaN with high crystalline quality. Since narrower wells operate at a higher carrier density for a given current density, they increase the fraction of carriers lost to Auger recombination and lower the efficiency. The incorporation of boron, a smaller group-III element, into InGaN alloys is a promising method to eliminate the lattice mismatch and realize high-power, high-efficiency visible LEDs with thick active regions. In this work, we apply predictive calculations based on hybrid density functional theory to investigate the thermodynamic, structural, and electronic properties of BInGaN alloys. Our results show that BInGaN alloys with a B:In ratio of 2:3 are better lattice matched to GaN compared to InGaN and, for indium fractions less than 0.2, nearly lattice matched. Deviations from Vegard's law appear as bowing of the in-plane lattice constant with respect to composition. Our thermodynamics calculations demonstrate that the solubility of boron is higher in InGaN than in pure GaN. Varying the Ga mole fraction while keeping the B:In ratio constant enables the adjustment of the (direct) gap in the 1.75–3.39 eV range, which covers the entire visible spectrum. Holes are strongly localized in non-bonded N 2p states caused by local bond planarization near boron atoms. Furthermore, our results indicate that BInGaN alloys are promising for fabricating nitride heterostructures with thick active regions for high-power, high-efficiency LEDs.

36 MATERIALS SCIENCE↗

Metal doping in cerium metal-organic frameworks for visible-response water splitting photocatalysts

Cerium metal-organic frameworks (MOFs) show great promise for photocatalytic water splitting as they have low-lying unoccupied 4f orbitals with energies lower than the unoccupied linker orbitals to drive the ligand-to-metal charge transfer (LMCT) of the photo- generated electron at the linker to separate the photo-excited charges. Nevertheless, the large and negative LMCT energies of Ce-MOFs are often accompanied by high photon-absorption energies, which then limits the application of Ce-MOFs as visible-light-driven water splitting photocatalysts. In this work, we propose that metal (Zr or Ti) doping can raise the very negative LMCT energies of Ce-MOFs, consequently leading to the decrease of the absorption energy and promoting the response of Ce-MOFs to visible light. By functionalizing the linker of the mixed-metal MOFs, we found two possible visible-response photocatalysts for water splitting using a single photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Piezo-optomechanical cantilever modulators for VLSI visible photonics

Visible-wavelength very large-scale integration photonic circuits have a potential to play important roles in quantum information and sensing technologies. The realization of scalable, high-speed, and low-loss photonic mesh circuits depends on reliable and well-engineered visible photonic components. Here, we report a low-voltage optical phase shifter based on piezo-actuated mechanical cantilevers, fabricated on a CMOS compatible, 200 mm wafer-based visible photonics platform. We show linear phase and amplitude modulation with 6 V π cm in differential operation, −1.5 to −2 dB insertion loss, and up to 40 dB contrast in the 700–780 nm range. By adjusting selected cantilever parameters, we demonstrate a low-displacement and a high-displacement device, both exhibiting a nearly flat frequency response from DC to a peak mechanical resonance at 23 and 6.8 MHz respectively, which, through resonant enhancement of Q ∼ 40, further decreases the operating voltage down to 0.15 V π cm.

Dong, Mark↗

FAINT COLLIMATED HERBIG-HARO JETS FROM VISIBLE STARS IN L1641

A population of 11 faint, collimated jets has been discovered in the northern part of the L1641 cloud in the region of HH 1/2, HH 34, and the L1641-N cluster. These jets were missed in previous imaging surveys on account of their weak emission, and they were discovered only on deep exposures with the Subaru 8 m telescope. With these new faint jets, the number of HH flows within the area surveyed has doubled. This suggests that collimated jets from young stars may be more common than previously assumed. It is noteworthy that all of the jets are associated with optically visible stars with r magnitudes ranging from 13.8 to 22.0. The driving sources of jets in regions flooded by ultraviolet radiation from nearby OB stars are known to be excavated by photoionization, and in three cases remnant H{alpha} emission envelopes are found associated with the sources, although the more benign environment in the region observed here, about 10 pc distant from the Orion Nebula Cluster, makes the optical visibility of all these sources rather surprising. Such faint jets from visible stars represent either the final vestiges of the outflow phenomenon, or they are triggered by disturbances of the remnant disks, possibly initiated by the orbital evolution of binaries that spiral in to form close binaries. Among the known H{alpha} emission stars within the region surveyed, 8% are found to be associated with jets.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTRAL IRRADIANCE CALIBRATION IN THE INFRARED. XVII. ZERO-MAGNITUDE BROADBAND FLUX REFERENCE FOR VISIBLE-TO-INFRARED PHOTOMETRY

The absolutely calibrated infrared (IR) stellar spectra of standard stars described by Engelke et al. are being extended into the visible and will span a continuous wavelength range from {approx}0.35 {mu}m to 35.0 {mu}m. This paper, which is a continuation of the series on calibration initiated with Cohen et al., presents the foundation of this extension. We find that due to various irregularities Vega ({alpha} Lyr) is not suitable for its traditional role as the primary visible or near-infrared standard star. We therefore define a new zero-point flux that is independent of Vega and, as far as is feasible, uses measured spectral energy distributions (SEDs) and fluxes derived from photometry. The calibrated primary stars now underpinning this zero-point definition are 109 Vir in the visible and Sirius ({alpha} CMa) in the infrared. The resulting zero-point SED tests well against solar analog data presented by Rieke et al. while also maintaining an unambiguous link to specific calibration stars, thus providing a pragmatic range of options for any researcher wishing to tie it to a given set of photometry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

HARD X-RAY IMAGING OF SOLAR FLARES USING INTERPOLATED VISIBILITIES

RHESSI produces solar flare images with the finest angular and spectral resolutions ever achieved at hard X-ray energies. Because this instrument uses indirect, collimator-based imaging techniques, the 'native' output of which is in the form of 'visibilities' (two-dimensional spatial Fourier components of the image), the development and application of robust, accurate, visibility-based image reconstruction techniques is required. Recognizing that the density of spatial-frequency (u, v) coverage by RHESSI is much sparser than that normally encountered in radio astronomy, we therefore introduce a method for image reconstruction from a relatively sparse distribution of sampled visibilities. The method involves spline interpolation at spatial frequencies less than the largest sampled frequency and the imposition of a positivity constraint on the image to reduce the ringing effects resulting from an unconstrained Fourier transform inversion procedure. Using simulated images consisting both of assumed mathematical forms and of the type of structure typically associated with solar flares, we validate the fidelity, accuracy, and robustness with which the new procedure recovers input images. The method faithfully recovers both single and multiple sources, both compact and extended, over a dynamic range of approx10:1. The performance of the method, which we term as uv{sub s}mooth, is compared with other RHESSI image reconstruction algorithms currently in use and its advantages summarized. We also illustrate the application of the method using RHESSI observations of four solar flares.

79 ASTRONOMY AND ASTROPHYSICS↗

Visible-light photoconductivity of Zn1-xCoxO and its dependence on Co2+ concentration

Many metal oxides investigated for solar photocatalysis or photoelectrochemistry have band gaps that are too wide to absorb a sufficient portion of the solar spectrum. Doping with impurity ions has been extensively explored as a strategy to sensitize such oxides to visible light, but the electronic structures of the resulting materials are frequently complex and poorly understood. Here, we report a detailed photoconductivity investigation of the wide-gap II-VI semiconductor ZnO doped with Co2+ (Zn1-xCoxO), which responds to visible light in photoelectrochemical and photoconductivity experiments and thus represents a well-defined model system for understanding dopant-sensitized oxides. Variable-temperature scanning photoconductivity measurements have been performed on high-structural-quality Zn1-xCoxO epitaxial films to examine the relationship between dopant concentration (x) and visible-light photoconductivity, with particular focus on mid-gap d-d photoactivity. Excitation into the intense 4T1(P) d-d band at ~2.0 eV (620 nm) leads to Co2+/3+ ionization with a quantum efficiency that increases with decreasing cobalt concentration and increasing sample temperature. Both spontaneous and thermally assisted ionization from the Co2+ d-d excited state are found to become less effective as x is increased, attributed to an increasing conduction-band-edge potential. These trends counter the increasing light absorption with increasing x, explaining the experimental maximum in external photon-to-current conversion efficiencies at values well below the solid solubility of Co2+ in ZnO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Search for an Anomalous Production of Charged-Current 𝜈 𝑒 Interactions without Visible Pions across Multiple Kinematic Observables in MicroBooNE

This Letter presents an investigation of low-energy electron-neutrino interactions in the Fermilab Booster Neutrino Beam by the MicroBooNE experiment, motivated by the excess of electron-neutrino-like events observed by the MiniBooNE experiment. This is the first measurement to use data from all five years of operation of the MicroBooNE experiment, corresponding to an exposure of 1.11 × 10 21 protons on target, a 70% increase on past results. Two samples of electron neutrino interactions without visible pions are used, one with visible protons and one without any visible protons. The MicroBooNE data show reasonable agreement with the nominal prediction, with 𝑝 values ≥26.7% when the two 𝜈 𝑒 samples are combined, though the prediction exceeds the data in limited regions of phase space. The data are further compared to two empirical models that modify the predicted rate of electron-neutrino interactions in different variables in the simulation to match the unfolded MiniBooNE low energy excess. In the first model, this unfolding is performed as a function of electron neutrino energy, while the second model aims to match the observed shower energy and angle distributions of the MiniBooNE excess. This measurement excludes an electronlike interpretation of the MiniBooNE excess based on these models at >99% CLs in all kinematic variables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

WE-E-18A-10: Comparison of Patient Dose and Vessel Visibility Between Antiscatter Grid Removal and Lower Angiographic Radiation Dose Settings for Pediatric Imaging: A Preclinical Investigation

Purpose: To define an alternative to antiscatter grid (ASG) removal in angiographic systems which achieves similar patient dose reduction as ASG removal without degrading image quality during pediatric imaging. Methods: This study was approved by the local institution animal care and use committee (IACUC). Six different digital subtraction angiography settings were evaluated that altered the mAs, (100, 70, 50, 35, 25, 17.5% of reference mAs) with and without ASG. Three pigs of 5, 15, and 20 kg (9, 15, and 17 cm abdominal thickness; smaller than a newborn, average 3 yr old, and average 10 year old human abdomen respectively) were imaged using the six dose settings with and without ASG. Image quality was defined as the order of vessel branch that is visible relative to the injected vessel. Five interventional radiologists evaluated all images. Image quality and patient dose were statistically compared using analysis of variance and receiver operating curve (ROC) analysis to define the preferred dose level and use of ASG for a minimum visibility of 2nd or 3rd order branches of vessel visibility. Results: ASG grid removal reduces dose by 26% with reduced image quality. Only with the ASG present can 3rd order branches be visualized; 100% mAs is required for 9 cm pig while 70% mAs is adequate for the larger pigs. 2nd order branches can be visualized with ASG at 17.5% mAs for all three pig sizes. Without the ASG, 50%, 35% and 35% mAs is required for smallest to largest pig. Conclusion: Removing ASG reduces patient dose and image quality. Image quality can be improved with the ASG present while further reducing patient dose if an optimized radiographic technique is used. Rami Nachabe is an employee of Philips Health Care; Keith Strauss is a paid consultant of Philips Health Care.

60 APPLIED LIFE SCIENCES↗

Quantification and comparison of visibility and image artifacts of a new liquid fiducial marker in a lung phantom for image-guided radiation therapy

Purpose: A new biodegradable liquid fiducial marker was devised to allow for easy insertion in lung tumors using thin needles. The purpose of this study was to evaluate the visibility of the liquid fiducial markers for image-guided radiation therapy and compare to existing solid fiducial markers and to one existing liquid fiducial marker currently commercially available. Methods: Fiducial marker visibility was quantified in terms of contrast to noise ratio (CNR) on planar kilovoltage x-ray images in a thorax phantom for different concentrations of the radio-opaque component of the new liquid fiducial marker, four solid fiducial markers, and one existing liquid fiducial marker. Additionally, the image artifacts produced on computer tomography (CT) and cone-beam CT (CBCT) of all fiducial markers were quantified. Results: The authors found that the new liquid fiducial marker with the highest concentration of the radio-opaque component had a CNR > 2.05 for 62/63 exposures, which compared favorably to the existing solid fiducial markers and to the existing liquid fiducial marker evaluated. On CT and CBCT, the new liquid fiducial marker with the highest concentration produced lower streaking index artifact (30 and 14, respectively) than the solid gold markers (113 and 20, respectively) and the existing liquid fiducial marker (39 and 20, respectively). The size of the image artifact was larger for all of the liquid fiducial markers compared to the solid fiducial markers because of their larger physical size. Conclusions: The visibility and the image artifacts produced by the new liquid fiducial markers were comparable to existing solid fiducial markers and the existing liquid fiducial marker. The authors conclude that the new liquid fiducial marker represents an alternative to the fiducial markers tested.

60 APPLIED LIFE SCIENCES↗

Detection of visible-wavelength aurora on Mars

Mars hosts various auroral processes despite the planet’s tenuous atmosphere and lack of a global magnetic field. To date, all aurora observations have been at ultraviolet wavelengths from orbit. We describe the discovery of green visible-wavelength aurora, originating from the atomic oxygen line at 557.7 nanometers, detected with the SuperCam and Mastcam-Z instruments on the Mars 2020 Perseverance rover. Near–real-time simulations of a Mars-directed coronal mass ejection (CME) provided sufficient lead-time to schedule an observation with the rover. The emission was observed 3 days after the CME eruption, suggesting that the aurora was induced by particles accelerated by the moving shock front. To our knowledge, detection of aurora from a planetary surface other than Earth has never been reported, nor has visible aurora been observed at Mars. This detection demonstrates that auroral forecasting at Mars is possible, and that during events with higher particle precipitation, or under less dusty atmospheric conditions, aurorae will be visible to future astronauts.

Science & Technology - Other Topics↗

Direct Water Splitting under Visible Light with Nanostructured Hematite and WO3 Photoanodes and a GaInP2 Photocathode

A p-GaInP{sub 2} photocathode was paired with nanostructured hematite and tungsten trioxide photoanodes to investigate the utility of these systems for direct water splitting under visible light illumination. For the hematite system, under illumination at open-circuit conditions, the potential of hematite shifts cathodically and that of the GaInP{sub 2} shifts anodically. Under short-circuit condition and visible light illumination, the combination of the two photoelectrodes can split water, though with a very low rate of a few {micro}A/cm{sup 2} even at an intensity of 1 W/cm{sup 2}. It was determined that the very low photocurrent from the hematite nanorod photoelectrode limits the short-circuit current of the two-photoelectrode combination. Similar potential shifts were observed with the nanostructured WO{sub 3}/GaInP{sub 2} combination. However, at light intensities below 0.2 W/cm{sup 2}, the short-circuited combination would not split water due to an insufficient potential difference. Above 0.2 W/cm{sup 2}, the combination can split water under visible light, with {approx}20 {micro}A/cm{sup 2} obtained at 1 W/cm{sup 2}. A linear photocurrent-light intensity relationship was observed and was attributed to efficient charge transfer and a low recombination of the charge carriers. The bandgap and the associated absorption limit of WO{sub 3} remain a challenge for a higher efficiency system.

08 HYDROGEN↗

Amorphous silicon carbide high contrast gratings as highly efficient spectrally selective visible reflectors

We report spectrally selective visible wavelength reflectors using hydrogenated amorphous silicon carbide (a-SiC:H) as a high index contrast material. Beyond 610nm and through the near infrared spectrum, a-SiC:H exhibits very low loss and exhibits an wavelength averaged index of refraction of n = 3.1. Here we design, fabricate, and characterize such visible reflectors using a hexagonal array of a-SiC:H nanopillars as wavelength-selective mirrors with a stop-band of approximately 40 nm full-width at half maximum. The fabricated high contrast grating exhibits reflectivity R >94% at a resonance wavelength of 642nm with a single layer of a-SiC:H nanopillars. The resonance wavelength is tunable by adjusting the geometrical parameters of the a-SiC:H nanopillar array, and we observe a stop-band spectral center shift from 635 nm up to 642 nm. High contrast gratings formed from a-SiC:H nanopillars are a promising platform for various visible wavelength nanophotonics applications.

Bauser, Haley C.↗

Non-resonant Bragg scattering four-wave mixing at near-visible wavelengths in low-confinement silicon nitride waveguides

Quantum state coherent frequency conversion processes—such as Bragg-scattering four-wave mixing (BSFWM)—hold promise as a flexible technique for networking heterogeneous and distant quantum systems. In this Letter, we demonstrate BSFWM within an extended (1.2-m) low-confinement silicon nitride waveguide and show that this system has the potential for near-unity frequency conversion in visible and near-visible wavelength ranges. Using sensitive classical heterodyne laser spectroscopy at low optical powers, we characterize the Kerr coefficient (∼1.55 W −1 m −1 ) and linear propagation loss (∼0.0175 dB/cm) of this non-resonant waveguide system, revealing a record-high nonlinear figure of merit (NFM = γ / α ≈ 3.85 W −1 ) for BSFWM of near-visible light in non-resonant silicon nitride waveguides. We predict how, at high yet achievable on-chip optical powers, this NFM would yield a comparatively large frequency conversion efficiency, opening the door to near-unity flexible frequency conversion without cavity enhancement and resulting bandwidth constraints.

Jaber, Nicholas (ORCID:000900070106809X)↗

High-Speed Radiography and Visible Light Extinction of a Pressure-Swirl Atomizer

X-ray radiography, imaging, and fluorescence have been applied to optically dense sprays with great success. The majority of these studies have focused on fuel spray studies for combustion engines and rockets, which have often required demanding or unusual environments or flow configurations that are not easily replicated by other researchers. X-ray measurements probe a different aspect of the spray (liquid density distribution) from visible light diagnostics (scattering from droplets), and as such it can be difficult to compare results from x-ray measurements to results with more conventional diagnostics. Moreover, many previous studies of quasi-steady state sprays have focused exclusively on the time-averaged behavior of the spray. This study will focus on detailed, time-resolved measurements of a small-scale, commercially available pressure-swirl atomizer with simultaneous x-ray radiography and visible light extinction. Furthermore, the data available from both the time-averaged and time-resolved measurements will be described, as well as the potential to correlate visible light extinction with x-ray radiography.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beam Meassurements Using Visible Synchrotron Light at NSLSII Storage Ring

Visible Synchrotron Light Monitor (SLM) diagnostic beamline has been designed and constructed at NSLS2 storage ring, to characterize the electron beam profile at various machine conditions. Thanks for the excellent alignment, SLM beamline was able to see the first visible light when beam was circulating the ring for the first turn. The beamline has been commissioned for the past year. Besides a normal CCD camera to monitor the beam profile, streak camera and gated camera are used to measure the longitudinal and transverse profile to understand the beam dynamics. Measurement results from these cameras will be present in this paper. A time correlated single photon counting system (TCSPC) has been setup and measures the single bunch purity using visible light, preliminary TCSPC measurement result will be presented as well.

36 MATERIALS SCIENCE↗

First search for an anomalous excess of charged-current $\nu_e$ interactions without visible pions using the full MicroBooNE dataset

This public note presents an investigation of low-energy electron-neutrino events in the Fermilab Booster Neutrino Beam by the MicroBooNE experiment. This search is motivated by the excess of low energy electromagnetic events observed by the MiniBooNE experiment and, more broadly, by the landscape of neutrino anomalies observed at short baselines. This is the first measurement to use all of the data collected by the MicroBooNE experiment, corresponding to $1.1\times 10^{21}$ protons on target. Two exclusive samples of electron neutrinos without visible pions are used, one with visible protons and one without any visible protons. MicroBooNE data is compared to two empirical models of the MiniBooNE low energy excess, one obtained by enhancing the electron-neutrino content as a function of the neutrino energy, and one representing the excess for the first time as a function of the kinematics of shower energy and angle. This measurement excludes an electron-like interpretation of the MiniBooNE excess based on these models at $\geq 99\%$ confidence level in all kinematic variables.

43 PARTICLE ACCELERATORS↗