Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Uranium concentration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

129 I, 99 Tc, and U Distribution Coefficients of Subsurface Sediments Collected from the Proposed Site of the Environmental Management Disposal Facility

Performance Assessment calculations were completed in 2020 to evaluate the Environmental Management Disposal Facility (EMDF), a proposed new low-level radioactive waste (LLW) disposal facility on the U.S. Department of Energy’s Oak Ridge Reservation (ORR). Among the large number of input parameters needed for such calculations, are distribution coefficients (K d values; radionuclide concentration solid: liquid ratio) that provide a measure of the tendency of radionuclides to bind to sediments. The objective of this study was to measure K d values of three radionuclides that may pose a disproportionately large amount of risk, U, iodine-129 ( 129 I) and technetium-99 ( 99 Tc). The average 129 I K d value for the 14 geological materials recovered from the proposed EMDF site was 37.8 mL/g and ranged from 0.45 to 140.9 mL/g. These values were consistent, but somewhat larger than previous measurements made with ORR sediments and were about an order of magnitude greater than those used in previous EMDF PA calculations. The median 99 Tc K d value was 365.7 mL/g, much greater than previously reported using ORR geological materials. Five of the 14 tested geological materials sorbed large quantities of 99 Tc, suggesting that the weakly sorbing 99 Tc(VII) species had been reduced to the sparingly soluble 99 Tc(IV) species. The five strongly sorbing sediments had apparent 99 Tc solubility values of approximately <10 -8 mol/L. The median U K d value was 5,726 mL/g. All of the tested geological materials had large K d values, ranging from 625 to >10,208 mL/g. Among the sediment samples that exhibited strong U binding, the apparent solubility value was approximately <10 -9 mol/L. Based on sediment properties and general ORR geological considerations, it was proposed that much of the 129 I and 99 Tc retention could be attributed to the site materials exhibiting low pH (average pH = 4.94), and/or the elevated levels of iron oxides, manganese oxides, and natural organic matter. Similarly, the extremely high U binding measured in these sediments may also be attributed to the low conditions of carbonates, which can complex and therefore solubilize uranyl in these tests due to the low pH, and also the relatively high concentrations of iron and organic coatings on these samples. An implication of this study is that the areas of the EMDF subsurface environment may have natural properties for attenuating 129 I, 99 Tc, and U movement, and potentially other radionuclides, thereby possibly reducing risk posed by burial of LLW at this site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Impact of Grazing Duration and Environment on Soil Carbon in Reclaimed Uranium Mines Tailings: A Region Specific Study

ABSTRACT Grassland ecosystems, which cover over one‐third of the Earth's land area, store 10%–30% of global soil carbon (C). However, these ecosystems face substantial impacts from human activities, including mining. This study investigates the spatial distribution of soil C and related environmental factors in reclaimed grasslands on former uranium mine sites in Wyoming. We hypothesized that grazing duration and environmental factors would influence soil C levels. Interactions between topography, vegetation diversity, soil properties, and soil C in the context of grazing management in both natural and reclaimed grasslands from a wide range of periods from 1 year to 100 years were analyzed using geographically weighted regression models. Data collected from 2022 to 2023 showed that total carbon was consistently higher in natural grasslands (1.2%–4.9%) than in reclaimed grasslands (0.8%–1.3%). Additionally, soil C was significantly higher in natural grasslands grazed for 1 year compared to those grazed for 100 years. In contrast, reclaimed grasslands had lower soil C in areas grazed for 1 year compared to those grazed for 7 or 14 years. The absolute values of coefficients from environmental covariates indicated that areas grazed for a shorter duration (~1 year) were more influenced by biotic and abiotic factors than areas grazed for longer periods (> 7 years). Our findings show moderate grazing increases the resiliency of grassland ecosystems when grazed 7 years or longer and acknowledge the roles of topographic, soil, and vegetative factors in enhancing soil C concentration and developing sustainable land management practices in rangeland conditions.

Shilpakar, Chandan [Department of Plant Sciences U↗
DOE OSTI2020

Mononuclear to Polynuclear U(IV) Structural Units: Effects of Reaction Conditions on U-Furoate Phase Formation

In this work, Uranium(IV) complexation by 2-furoic acid was examined to better understand the effects of ligand identity and reaction conditions on species formation and stability. Five compounds were isolated: [UCl 2 (2-FA) 2 (H 2 O) 2 ] n (1), [U 4 Cl 10 O 2 (THF) 6 (2-FA) 2 ]•2(THF) (2), [U 6 O 4 (OH) 4 (H 2 O) 3 (2-FA) 12 ]•7(THF)•(H 2 O) (3), [U 6 O 4 (OH) 4 (H 2 O) 2 (2-FA) 12 ]•8.76(H 2 O) (4), and [U 38 Cl 42 O 54 (OH) 2 (H 2 O) 20 ]•m(H 2 O)•n(THF) (5). The structures were determined by single crystal X-ray diffraction and further characterized by Raman, IR, and optical absorption spectroscopy. The thermal stability and magnetic behavior of the compounds were also examined. Variations in the synthetic conditions led to notable differences in the structural units observed in the solid state. At low H 2 O/THF ratios, a tetranuclear oxo bridged [U 4 O 2 ] core was isolated. Aging of this solution resulted in the formation a U 38 oxo cluster capped by chloro and water ligands. However, at increasing water concentrations only hexanuclear units were observed. In all cases, at temperatures of 100-120 °C, UO 2 nanoparticles formed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Synchrotron micro-computed tomography analysis of neutron-irradiated U-Mo fuel

The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8 × 10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3 [+9.7/−3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3 [+14.7/−7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53 %, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. In conclusion, the novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

3D pore structure reconstruction of fluff region in top of EBR-II irradiated fuel by X-ray micro-computed tomography

Metallic fuels comprised of U-Zr binary and U-Pu-Zr ternary alloys are a promising fuel candidate for sodium-cooled fast reactors and possess many advantages over ceramic fuels such as higher uranium density and improved thermal conductivity. Fluff is a highly porous structure forming at the top of metallic fuel slugs during irradiation and was extensively observed in past sodium-cooled fast reactor (SFR) experiments such as Idaho National Laboratory’s Experimental Breeder Reactor II (EBR-II). Previous investigations have shown that fluff is rich in fissile atoms and hence could have neutronics implications, but its formation mechanisms are not understood. In this work, two cube-shaped lift outs were taken from the fluff and bulk fuel regions of a high burnup U-19Pu-10Zr composition EBR-II fuel slug and characterized by micro computed tomography (Micro-CT) and energy dispersive x-ray spectroscopy (EDS). This was used to characterize differences in microscale porosity and composition between fluff and bulk fuel, and to support or oppose postulated fluff formation mechanisms. Surface EDS showed minimal differences between the elemental compositions of the fluff and fuel cubes. However, three-dimensional (3D) pore analysis from the tomography scans showed significant differences between the fluff and fuel cube pore size distributions at the microscale level. The high porosity and irregular pore distribution seen in macroscale fluff was also present within the micro-scale fluff cube, having a much higher porosity than the fuel cube which was concentrated in a few large pore networks. In conclusion, these results indicate support for a creep driven mechanism of fluff formation.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures

Reaction mechanism of phosphoric activated metakaolin is studied by techniques of calorimetry, ICP-OES, FTIR and NMR taking curing temperature and [H{sub 3}PO{sub 4}] as variables. A two-stage curing method including pre-curing at 40 °C for 24 h and second curing at 60/80 °C for another 24 h effectively mitigates thermal-cracking of the obtained silico-aluminate phosphate (SAP) samples, whose maximum compressive strength reaches 120 MPa. Dealumination of metakaolin in H{sub 3}PO{sub 4} solution produces low aluminate-containing silicate units and subsequently condensation of silicate tetrahedrons occurs. Higher temperature and H{sub 3}PO{sub 4} concentration accelerate the two processes. After complete reaction, A{sub VI} structure from metakaolin disappears and the dissolved Al preferably forms Al{sub VI}-O-P units. During reaction, metastable P-O-P intermediate appears in SAPs with higher P/Al ratio and finally transforms into Al-O-P structure upon PO{sub 4}{sup 3−} consumption. Phosphate units as P(OAl){sub x}(H{sub 2}O){sub 4-x} are connected with Si or Al structure units. Major structural units of the SAPs include Al-O-P, Si-O-P, Si-O-Si, and Si-O-Al.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Transmission electron microscopy investigation of phase transformation and fuel constituent redistribution in neutron irradiated U-10wt.%Zr fuel

Uranium-10wt.%zirconium (U-10wt.%Zr) is a primary candidate for fast reactor nuclear fuels. However, there is a lack of data characterizing neutron irradiated crystallographic phases and chemistry. In the current study, the microstructural evolution of a U-10wt.%Zr fuel neutron irradiated to a burnup of 5.7 at.% was investigated by scanning transmission electron microscopy, energy dispersive spectroscopy, and selected area electron diffraction to determine the major phases, alterations in microstructure, and variations in local chemical composition at different localities of a fuel cross-section. The current study revealed that the irradiated U-10wt.%Zr fuel was comprised of various major phases, including a-U, ß-U, and d-UZr2, as well as amorphous and crystalline solid fission product (FP) precipitates within different regions of the fuel cross-section. Regions A and A/B in the center of the fuel were comprised of U-rich, U-intermediate, and U-lean localities with a-U and d-UZr 2 composing the major phases. Regions B and C in the intermediate and peripheral fuel localities, respectively, were comprised of a-U grains, U-rich (ß-U) grains with Zr-rich precipitates, U-intermediate grains (d-UZr2), and solid FP precipitates. The major phases identified were associated with the nanoscopic chemical concentrations, the phase diagram, and the as-characterized specimen temperature, with the exception of the non-equilibrium ß-U phase identified in region B. The U-lean localities in regions A, A/B, B, and C were Zr-enriched pathways along subgrain/grain boundaries. This phenomenon suggests that Zr is susceptible to radiation-induced segregation in U-Zr fuels and indicates a new mechanism for constituent redistribution.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mass spectrometric investigations into 3D printed parts to assess radiopurity as ultralow background materials for rare event physics detectors

The mass concentrations of 232 Th and 238 U in several 3D printing filaments and printed polymer parts are reported as measures of their radiopurity. In order to minimize background signals in rare event physics detectors, radiopure polymers are necessary as dielectric and structural materials in their construction. New data are reported for polyvinylidene fluoride (PVDF), polyphenylene sulfide (PPS), and two forms of polyetherimide (PEI, branded ULTEM 1010 and 9085). Data for starting filaments and both simple and complex printed parts are reported. PVDF filaments and simple printed beads, were found to have values of approximately 30 and 50 pg g -1 for 232 Th and 238 U, respectively, while a more complex spring clip part had slightly elevated 232 Th levels of 65 pg g -1 , with 238 U remaining at 50 pg g -1 . PPS filament was found to have concentrations of 270 and 710 pg g -1 for 232 Th and 238 U, respectively, and were not chosen to be printed as those levels were already higher than other material options. ULTEM 1010 filaments and printed complex spring clip parts were found to have concentrations of around 5 and 7 pg g -1 for 232 Th and 238 U, respectively, illustrating no significant contamination from the printing process. ULTEM 9085 filaments were found to have concentrations of around 9 and 5 pg g -1 for 232 Th and 238 U, respectively, while the printed complex spring clip part was found to have slightly elevated concentrations of 25 and 7 pg g -1 for 232 Th and 238 U, respectively. All these results were obtained using a novel dry ashing method in crucibles constructed of ultralow background electroformed copper or, when applicable, microwave assisted wet ashing digestion. Samples and process blanks were spiked with 229 Th and 233 U as internal standards prior to dry/wet ashing and determinations were made by inductively coupled plasma mass spectrometry (ICP-MS). In order to maintain high radiopurity levels, pre-cleaning the filaments before printing and post-cleaning the parts is recommended, although the printing process itself has shown to contribute very minute amounts of radiocontaminants.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Irradiation-enhanced diffusion and diffusion-limited creep in U 3 Si 2

U 3 Si 2 is an advanced fuel candidate due to its relatively high fissile density and attractive thermal properties. Compared to standard UO 2 fuel, there are significant data gaps for the thermophysical and thermomechanical properties of U 3 Si 2 . Point defect concentrations and mobilities under irradiation govern a number of important fuel performance properties, such as creep and fission gas release. In this work, we utilized density functional theory (DFT) data to inform a cluster dynamics framework to predict point defect concentrations in U 3 Si 2 under irradiation. Molecular dynamics (MD) simulations were used to examine the contribution of atomic mixing during ballistic cascades to diffusion, as well as the diffusivity of U and Si at grain boundaries. These atomic scale models for diffusivity were then used to inform a creep model based on bulk (Nabarro-Herring) and grain boundary (Coble) diffusional creep, and climb-limited dislocation creep. The model compares well against available experimental data and has been implemented in the BISON fuel performance code. Finally, a demonstration case using simple power profiles has been carried out, showing that negligible creep occurs due to the low temperatures experienced by U 3 Si 2 in-reactor, a consequence of its high thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Microstructural and crystallographic effects of sol-gel synthesized Ti-doped UO 2 sintered under reducing conditions

Titanium (Ti)-doped UO 2 microspheres of three different Ti concentrations (1000, 2000, and 4000 wppm) were synthesized using an internal gelation process. The microspheres were pressed into pellets, and a two-step heat treatment was applied to form monolithic cylindrical pellets with high densities (≥95%TD). Microstructure of these samples consisted of equiaxed grains with >300% increase in average grain size compared to the undoped UO 2 pellets. Secondary Ti-rich chemical phases corresponding to a liquid eutectic formed during sintering were observed at grain boundaries of UO 2 for samples doped with 4000 wppm Ti. Furthermore, these Ti-rich chemical phases were not observed in 1000 or 2000 wppm Ti samples at microscale using electron microscopy investigations. The 0.02–0.04% lower lattice parameter values for the Ti-doped UO 2 samples compared to the undoped UO 2 confirms the incorporation of Ti into the UO 2 lattice.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Modeling mesoscale fission gas behavior in UO2 by directly coupling the phase field method to spatially resolved cluster dynamics

Abstract Fission gas release within uranium dioxide nuclear fuel occurs as gas atoms diffuse through grains and arrive at grain boundary (GB) bubbles; these GB bubbles grow and interconnect with grain edge bubbles; and grain edge tunnels grow and connect to free surfaces. In this study, a hybrid multi-scale/multi-physics simulation approach is presented to investigate these mechanisms of fission gas release at the mesoscale. In this approach, fission gas production, diffusion, clustering to form intragranular bubbles, and re-solution within grains are included using spatially resolved cluster dynamics in the Xolotl code. GB migration and intergranular bubble growth and coalescence are included using the phase field method in the MARMOT code. This hybrid model couples Xolotl to MARMOT using the MultiApp and Transfer systems in the MOOSE framework, with Xolotl passing the arrival rate of gas atoms at GBs and intergranular bubble surfaces to MARMOT and MARMOT passing evolved GBs and bubble surface positions to Xolotl. The coupled approach performs well on the two-dimensional simulations performed in this work, producing similar results to the standard phase field model when Xolotl does not include fission gas clustering or re-solution. The hybrid model performs well computationally, with a negligible cost of coupling Xolotl and MARMOT and good parallel scalability. The hybrid model predicts that intragranular fission gas clustering and bubble formation results in up to 70% of the fission gas being trapped within grains, causing the increase in the intergranular bubble fraction to slow by a factor of six. Re-solution has a small impact on the fission gas behavior at 1800 K but it has a much larger impact at 1000 K, resulting in a twenty-times increase in the concentration of single gas atoms within grains. Due to the low diffusion rate, this increase in mobile gas atoms only results in a small acceleration in the growth of the intergranular bubble fraction. Finally, the hybrid model accounts for migrating GBs sweeping up gas atoms. This results in faster intergranular bubble growth with smaller initial grain sizes, since the additional GB migration results in more immobile gas clusters reaching GBs.

Kim, Dong-Uk↗
DOE OSTI2024

Atomistic Simulations for Thermophysical Properties of Uranium-Containing Halide Molten Salts

Characterizing the thermophysical properties in both fuel and coolant salts are critical in modeling, developing, process optimizing and utilizing molten salt reactors (MSRs), as these properties directly relate to operation metrics and can inform on the selection of candidate salts. The demand for consistent, accurate and publicly available thermophysical property data has become more apparent in recent years as interests have increased from molten salt reactor developers. There are a number of challenges in experimentally measuring properties such as thermal conductivity, viscosity, density and heat capacity , which have led to sparse and often times conflicting data points or molten salts in general. Additionally, there are a number of hazards to consider when synthesizing, storing, using, treating and disposing of molten salts. With the advances in computational capabilities over the last 10 years, the use of atomistic simulations can be implemented to support these efforts. The primary objective of this work is characterize the thermophysical transport properties in a number of molten chloride salts, and in particular NaCl-UCl 3 using ab-initio molecular dynamic (AIMD) simulations. In this binary salt the UCl 3 acts as the primary fissile material and NaCl acts as a carrier salt due with its’ high solubility for actinides A number of studies on the thermophysical properties of NaCl-UCl 3 have been published but there is not a vast amount of viscosity data for this system. In 1975, Desyatnik, et al published a study reporting dynamic viscosities that were calculated from kinematic viscosity measurements, and using the coefficients provided the viscosity in a 70:30 NaCl:UCl 3 mixture is 2.29 cP and 2.88 for a 60:40 mixture. Termini et al. recently reported viscosities in the range of 2.75 – 3 cP for the 63:37 NaCl-UCl 3 mixture in the same temperature range using rolling ball viscosity measurements. Computational viscosity of a similar mixture (64:36) can be obtained from the work Andersson et al. using the reported diffusion coefficients, and the hydrodynamic radius from the pair-radial distribution functions (RDFs). Using Eq (1) (vida infra), the viscosity would be 2.50 cP at 1100K. This is not to say that these values are incorrect due to the varying reported values, but aims to highlight the necessity of this work. The data reported in this ongoing work are computations on a 64:36 mixture of NaCl-UCl 3 at 987K. This work is likely to be expanded into varying concentrations of this mixture along with the inclusion of other salt candidate mixtures.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

First Principle based Thermal Conductivity Modeling of Metal Alloys with Applications on Uranium Alloys

Thermal conductivity is an important materials property related to heat transport, which is essential to many applications, ranging from thermoelectrics to nuclear reactor materials. High- quality thermal conductivity data is critical to these materials and their associated technologies, including the nuclear fuel materials like traditional oxide fuels and metallic uranium (U) fuels, e.g. U-Zr and U-Mo alloys. And thermal conductivity modeling is widely used to interpolate or extrapolate experimental data, to obtain high-quality thermal conductivity data over wide temperature and composition range, and to understand the impacts of different factors including defects and microstructures. However, a general thermal conductivity model for metal alloys which can work regrading different phase components is still missing. Also, for U alloys, a thermal conductivity model working with different phases is needed. Therefore, in this work, we developed thermal conductivity models for metal alloys, based on ab-initio calculations, semi-classical physics rules, and limited experimental data. The goals of these models are to help obtain high- quality thermal conductivity data within a little experimental input as possible, have models that are extendable to varying microstructures, including different types of irradiation effects, and provide mechanistic understanding of heat transfer in the modeled alloys. In this work, our model solves several challenges in the development. The DFT-BTE approach is applied to decrease the reliance on experimental data and make the model extendable to composition changes and defects. A practical and efficient way to combine the DFT inputs with physics rules is pointed out in this work too. A staged approach, which starts from simple cases of elemental metals, then extends to solid solutions, different compound phases, and multi-phase mixtures, is presented to work with the metal alloys in different phase components. Our models are demonstrated respectively on aU for elemental metal model, on U-Zr and U-Mo alloys in aU temperature range for multi-phase mixture model, on high-temperature U-Zr, U-Nb, and U-Mo alloys in the body-centered cubic phase for concentrated solid solution model, and on irradiated U-Mo alloys for irradiated metal alloy model. All models show great agreement with experimental data. In these demonstrations, our model shows its advantages compared to previous empirical fitting model. Our model requires fewer experimental data, due to the inputs from DFT. The quantitative insights into the different physical factors are provided in our model, as it incorporates the electron and phonon scattering mechanisms. Our model also can be extended to incorporate the contributions of point defects, grain boundaries, and noble gas bubbles, to integrate their effects on heat transfer. This model can serve as both a foundation for understanding the more complex thermal conductivity of realistic U alloy fuels and a useful tool to guide further modeling of thermal conductivity to aid materials and device design.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Comparative uptake, translocation, and plant mediated transport of Tc-99, Cs-133, Np-237, and U-238 in Savannah River Site soil columns for the grass species Andropogon virginicus

Here, this study examines the ability of the grass species Andropogon virginicus to alter the subsurface transport and redistribution of a suite of radionuclides ( 99 Tc, 133 Cs (stable analog for 135 Cs and 137 Cs), 237 Np, 238 U) with varying chemical behaviors in a Savannah River Site soil via the use of vegetated and unvegetated soil columns. After an acclimation period, a small volume of solution containing all radionuclides was introduced into the columns via Rhizon© pore water sampling tubes. Plants were grown for an additional 4 weeks before shoots were harvested, and columns were prepared for sampling. Plant presence led to decreased radionuclide release from the columns, mainly due to radionuclide specific combinations of system hydrology differences resulting from plant transpiration as well as plant uptake. For the most mobile radionuclides, 99 Tc followed by 237 Np, plant presence resulted in significantly different soil concentration profiles between vegetated and unvegetated columns, including notable upward migration for 237 Np in columns with plants. Additionally, plant uptake of 99 Tc was the greatest of all the radionuclides, with plant tissues containing an average of 44 % of the 99 Tc, while plant uptake only accounted for <2 % of 237 Np and <0.5 % of 133 Cs and 238 U in the system. Although overall plant uptake of 133 Cs and 238 U were similar, the majority of 133 Cs taken up by plants was associated with 133 Cs already available in the aqueous phase while 238 U uptake was mainly associated with the solid phase, meaning that plant activity resulted in a fraction of the native 238 U being mobilized and thus, made available for plant uptake. Overall, this study quantified the influence of several plant-mediated physical and biogeochemical factors that have significant influence on radionuclide mobility and transport in this complex system which can be further utilized in future system or site-specific environmental transport and risk assessment models.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Investigation of a U(IV)/U(III) Thermodynamic Reference Electrode for High-Temperature Molten Fluoride Salts

While thermodynamic reference electrodes with known and stable potentials are common in traditional aqueous systems, the high temperature and corrosive environment of a molten fluoride salt makes achieving long term stability with a thermodynamic reference electrode challenging, especially at temperatures of 600°C or higher. In this work, a thermodynamic reference electrode consisting of U(IV)/U(III) in a boron nitride compartment was evaluated for use in FLiBe at temperatures ≥ 600°C. FLiBe used in the study was purified by AlphaTech's proprietary process and characterized by ICP-MS and square wave voltammetry. The free oxide concentration was <2 ppm. Using the purified FLiBe, the U(IV)/U(III) thermodynamic reference electrode was shown to provide a stable, well-defined, and reproducible potential for more than 600+ hours of use in different tests. Moreover, the thermodynamic reference electrode showed a consistent potential with no signs of failure, even after being cooled between tests and then reheated for reuse. Thus, the U(IV)/U(III) reference electrode is suitable for use in rigorous electrochemical studies in molten fluoride salts. As a result, it may be useful as a common standard, facilitating the advancement of nuclear applications such as isotope separation or online monitoring of reactor systems through improved certainty in the measurement of thermodynamic potentials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Cluster Dynamics Simulations of Intra-Granular Fission Gas Bubble Size and Pressure Evolution in UO 2

Fission gases such as xenon (Xe) play a critical role in determining the behavior and response of nuclear fuel. Given that Xe has little solubility in UO 2 , it accumulates and forms bubbles, which significantly impact fuel performance. Intra- and inter-granular bubble nucleation and growth can lead to fuel swelling, and once bubbles interconnect at grain boundaries, fission gas can be released into the plenum. At low temperatures, limited uranium vacancy mobility can restrict swelling, therefore causing the bubbles to become highly pressurized. Consequently, this can induce micro-cracking, promote fission gas release (increasing the likelihood of cladding failure), and even lead to fuel pulverization under accident conditions such as a loss of coolant accident. As bubble evolution is strongly influenced by local temperature and fission rate, markedly different behavior occurs across the radial profile of the fuel pellet. Capturing the mechanisms that underpin bubble evolution is therefore important to predict these behaviors in the fuel. Previous models describing important mechanisms informed by lower length scale simulations have been developed under the NEAMS program. These can describe the evolution of a single bubble type (i.e., single value for radius and pressure) at each position in the pellet, for instance using the Centipede cluster dynamic code. However, in reality, a full distribution in bubble sizes and pressures exists within the microstructure at a given position in the pellet. To address this the cluster dynamics code Xolotl, which can predict Xe and vacancy phase space (i.e., bubble distributions) for intra-granular bubbles, has been used before. Prior work benchmarked the Xolotl code against the Centipede cluster dynamics code to ensure compatibility and to verify that mobile defect properties are adequately transferred between the two codes, along with some physics improvements. In this work, we go further by introducing a physics-based set of improvements that will allow us to accurately predict bubble size distributions and internal bubble pressures under representative UO 2 irradiation conditions. The improvements include (i) coupling bubble-defect reaction energies to a virial equation of state (EOS), (ii) including a bubble surface tension contribution, (iii) incorporating radiation-induced re-solution of Xe and vacancies, (iv) enabling pressure-driven dislocation loop punching through an effective emission of interstitial clusters informed by interstitial loop energetics, (v) accounting for radiation induced athermal diffusion of Xe, and (vi) implementing a Booth-type grain boundary sink representation for all mobile defects and defect clusters. After these modifications, we observe good agreement of Xolotl fission gas bubble size and concentration predictions with legacy experimental measurements. Additionally, it allows the distribution of Xe bubble pressures and radius to also be predicted and compared to data produced through the Advanced Fuels Campaign (AFC) program. Here, we have done this by running simulations under conditions similar to the AFC post-irradiation examination (PIE) samples irradiated at North Anna 2 light water reactor (LWR). Our results shows excellent agreement with these experimental measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Innovative Strategies for Long-Term Monitoring of Complex Groundwater Plumes at DOE’s Legacy Sites (Workshop Report)

Most remaining Department of Energy (DOE) sites will require extended periods of institutional control, especially at complex groundwater sites where attenuation-based strategies have been implemented to facilitate closure. The current practice of monitoring—obtaining and analyzing contaminant concentration in groundwater samples at numerous wells—will account for a large portion of the projected life-cycle at these DOE sites unless a new approach is adopted. State-of-the-art technologies are being developed, including in situ sensors, geophysics, radiation mapping, numerical modeling and AI/ML. These technologies can optimize monitoring strategies in space and time, provide spatially extensive information at vulnerable regions and/or provide more continuous monitoring at lower cost. As part of DOE’s Office of Environmental Management (DOE-EM’s) efforts to advance long-term monitoring systems, an in-person/virtual hybrid workshop was hosted by Savannah River National Laboratory (SRNL) on January 24 and 25, 2023, in Augusta, Georgia. Because DOE-EM’s complex sites will eventually be transferred to DOE’s Office of Legacy Management (DOE-LM), representatives of DOE-LM were important participants in the workshop. The purpose of the workshop was to identify challenges and opportunities for deploying advanced technologies for long-term monitoring at DOE sites. The key questions during the workshop were: 1) the regulatory acceptance of replacing a process that traditionally has used laboratory sampling and analysis of groundwater samples, and 2) the application of this strategy to the southwestern arid sites that include many of the remaining DOE-EM and DOE-LM complex groundwater plumes. Characteristics common to most arid sites present both limitations and opportunities for advanced technologies. DOE-EM has funded a National Laboratory team from SRNL, Lawrence Berkeley National Laboratory (LBNL), and Pacific Northwest National Laboratory (PNNL) to establish the overarching framework of long-term monitoring by systematically combining advanced hardware and software technologies. This project is titled “Advanced Long-Term Environmental Monitoring Systems (ALTEMIS)” and is sponsored by the DOE-EM Technology Development Program. The multi-laboratory team is currently developing and testing innovative monitoring strategies, including the use of in situ groundwater sensors, geophysics, drone/satellite-based remote sensing, reactive transport modeling, and artificial intelligence/machine learning (AI/ML). The project’s demonstration testbed is at the Savannah River Site (SRS) F-Area Seepage Basins, where a well-characterized complex groundwater plume composed of uranium and other radionuclides is in the latter stages of remediation. The workshop included more than 70 participants, presentations, a field visit to F-Area, breakout working groups, and large group discussion. Participants developed recommendations on five topics: in situ sensors, spatially integrative tools, challenges to regulatory acceptance, AI/ML strategies, and transitioning sites to DOE-LM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗