Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transition Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Signatures of a liquid–liquid transition in an ab initio deep neural network model for water

Significance Water is central across much of the physical and biological sciences and exhibits physical properties that are qualitatively distinct from those of most other liquids. Understanding the microscopic basis of water’s peculiar properties remains an active area of research. One intriguing hypothesis is that liquid water can separate into metastable high- and low-density liquid phases at low temperatures and high pressures, and the existence of this liquid–liquid transition could explain many of water’s anomalous properties. We used state-of-the-art approaches in computational quantum chemistry, statistical mechanics, and machine learning and obtained evidence consistent with a liquid–liquid transition, supporting the argument for the existence of this phenomenon in real water.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Perturbative study of the one-dimensional quantum clock model

In this report we calculate the ground-state energy density ε(g) for the one-dimensional N-state quantum clock model up to order 18, where g is the coupling and N = 3,4,5,...,10, 20. Using methods based on the Padé approximation, we extract the singular structure of ε"(g) or ε(g). They correspond to the specific heat and free energy of the classical two-dimensional (2D) clock model. We find that, for N = 3, 4, there is a single critical point at g c = 1. The heat capacity exponent of the corresponding 2D classical model is α = 0.34 ± 0.01 for N = 3, and α = - 0.01 ± 0.01 for N = 4. For N > 4, there are two exponential singularities related by g c1 = 1/g c2 , and ε(g) behaves as Ae - $\frac{c}{|g_c -g|^a}$ + analytic terms near g c . The exponent σ gradually grows from 0.2 to 0.5 as N increases from 5 to 9, and it stabilizes at 0.5 when N > 9. The phase transitions exhibited in these models should be generalizations of the Kosterlitz-Thouless transition, which has σ = 0.5 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

The modeling of delayed-onset Rayleigh-Taylor and transition to mixing in laser-driven HED experiments

In this paper, we discuss simulations, along with a benchmarking experiment, performed using the xRAGE code which demonstrate the ability of a laser model to predict laser-driven, high-energy-density shock hydrodynamics with good fidelity. This directly contributes to our ability to model hydrodynamic-instability dynamics produced by a laser drive typical of those available at OMEGA, OMEGA-EP, NIF, and similar facilities. In particular, we show how the laser model is essential for predicting deceleration-phase Rayleigh-Taylor arising from laser turn-off. We do this using the experimental case of a seeded single-mode perturbation. Then, we turn to a seeded multimode perturbation to show how the above result permits us to access the modeling of hydrodynamic mixing, a topic of interest for future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Theory of anisotropic elastoresistivity of two-dimensional extremely strongly correlated metals

There is considerable recent interest in the phenomenon of anisotropic electroresistivity of correlated metals. Although some interesting work has been done on the iron-based superconducting systems, not much is known for the cuprate materials. Here we study the anisotropy of elastoresistivity for cuprates in the normal state. We introduce theoretical results for the effect of strain on resistivity and additionally on the optical weight and local density of states. We use the recently developed extremely strongly correlated Fermi liquid theory in two dimensions, which accounts quantitatively for the unstrained resistivities for three families of single-layer cuprates. The strained hoppings of a tight-binding model are roughly modeled analogously to strained transition metals. The strained resistivity for a two-dimensional t-t'-J model are then obtained, using the equations developed in recent work. Our quantitative predictions for these quantities have the prospect of experimental tests in the near future, for strongly correlated materials such as the hole-doped and electron-doped high-T c materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Misanthropic entropy and renormalization as a communication channel

A central physical question is the extent to which infrared (IR) observations are sufficient to reconstruct a candidate ultraviolet (UV) completion. We recast this question as a problem of communication, with messages encoded in field configurations of the UV being transmitted to the IR degrees of freedom via a noisy channel specified by renormalization group (RG) flow, with noise generated by coarse graining/decimation. We present an explicit formulation of these considerations in terms of lattice field theory, where we show that the “misanthropic entropy” — the mutual information obtained from decimating neighbors — encodes the extent to which information is lost in marginalizing over/tracing out UV degrees of freedom. Our considerations apply both to statistical field theories as well as density matrix renormalization of quantum systems, where in the quantum case, the statistical field theory analysis amounts to a leading-order approximation. As a concrete example, we focus on the case of the 2D Ising model, where we show that the misanthropic entropy detects the onset of the phase transition at the Ising model critical point.

Physics↗
DOE OSTI2022

Quantum phase transition dynamics in the two-dimensional transverse-field Ising model

The quantum Kibble-Zurek mechanism (QKZM) predicts universal dynamical behavior near the quantum phase transitions (QPTs). It is now well understood for the one-dimensional quantum matter. Higher-dimensional systems, however, remain a challenge, complicated by the fundamentally different character of the associated QPTs and their underlying conformal field theories. In this work, we take the first steps toward theoretical exploration of the QKZM in two dimensions for interacting quantum matter. We study the dynamical crossing of the QPT in the paradigmatic Ising model by a joint effort of modern state-of-the-art numerical methods, including artificial neural networks and tensor networks. As a central result, we quantify universal QKZM behavior close to the QPT. We also note that, upon traversing further into the ferromagnetic regime, deviations from the QKZM prediction appear. We explain the observed behavior by proposing an extended QKZM taking into account spectral information as well as phase ordering. Our work provides a testing platform for higher-dimensional quantum simulators.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Flexocaloric effect in superelastic materials

We present a combined theoretical–experimental study of flexocaloric effects in superelastic materials exhibiting structural transitions. We study a Ginzburg–Landau model combined with a vibrational model for a beam near a ferroelastic transition loaded with a three-point bending setup. We also perform experiments on a Cu–Al–Ni single crystal undergoing a martensitic transition. We measure bent beam profiles, vertical force vs vertical deflection during a slow isothermal process, time evolution of the bending and unbending amplitudes, and the evolution of temperature profiles. We also compute the evolution of heat source and heat sink profiles. Finally, we study the location of acoustic emission events during the bending/unbending experiment. Our observations are consistent with the model predictions and allow us to identify the main physical parameters relevant for flexocaloric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantification of High-Temperature Transition Al2O3 and Their Phase Transformations

High temperature exposure of ?-Al2O3 can lead to a series of polymorphic transformations, including the formation of ?-Al2O3 and ?-Al2O3. Quantification of the microstructure in the ?/?-Al2O3 formation range represents a formidable challenge as both phases accommodate a high degree of structural disorder. In this work, we explore the use of XRD recursive stacking formalism for quantification of high temperature transition aluminas. We formulate the recursive stacking methodology for modelling of disorder in ?-Al2O3 and twinning in ?-Al2O3 and show that explicitly accounting for the disorder is necessary to reliably model the XRD patterns of high temperature transition alumina. In the second part, we use the recursive stacking approach to study phase transformation during high temperature (1050 ºC) treatment. We show that the two different intergrowth modes of ?-Al2O3 have different transformation characteristics, and that a significant portion of ?-Al2O3 is stabilized with ?-Al2O3 even after prolonged high-temperature exposures. In discussions, we outline the limitation of the current XRD approach and discuss a possible multimodal XRD and NMR approach which can improve analysis of complex transition aluminas. This work was performed in the Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by DOEs Office of Biological and Environmental Research and located at PNNL. The work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.

Kovarik, Libor↗
DOE OSTI2020

A new flow pattern map for flow boiling of R410A in horizontal micro-fin tubes considering the effect of the helix angle

This paper presents an improved flow pattern map for flow boiling in horizontal micro-fin tubes considering the effect of helix angle. The proposed map is modified from the one developed for horizontal smooth tubes by Wojtan et al. (2005) and takes the early transition to annular flow due to micro-fin geometry into account. Visualization of R410A flow boiling is carried out through the transparent smooth and micro-fin tubes with 0°, 10° and 18° helix angle and plotted on the proposed map for comparison. The result shows that the flow pattern map for micro-fin tube with 0° helix angle is generally similar to that for the smooth tube. For the tube with 10° and 18° helix angle, the annular flow occurs at lower vapor quality and lower mass flux. The proposed map shows good agreements when compared with the visualization and reflects the downward shift (to lower mass flux and vapor quality conditions) of the SW-WA transition with the increase of the helix angle. In order to further validate the proposed model, the flow pattern transitions calculated from the equations are also compared with the experimental data of the micro-fin tube in literature. The results show that the modified map increase the prediction accuracy of the flow patterns in the micro-fin tube.

42 ENGINEERING↗
DOE OSTI2021

Surface Salinity Under Transitioning Ice Cover in the Canada Basin: Climate Model Biases Linked to Vertical Distribution of Fresh Water

Abstract The Canada Basin has exhibited a significant trend toward a fresher surface layer and thus a more stratified upper‐ocean over the past three decades. State‐of‐the‐art ice‐ocean models, by contrast, tend to simulate a surface layer that is saltier and less stratified than observed. Here, we examine decadal changes to seasonal processes that may contribute to this wide‐reaching model bias using climate model simulations from the Community Earth System Model and below‐ice observations from the Arctic Ice Dynamics Joint Experiment in 1975 and Ice Tethered Profilers in 2006–2012. In contrast to the observations, the models simulate salinity profiles that show relatively little variation between 1975 and 2012. We demonstrate that this bias can be mainly attributed to unrealistically deep vertical mixing in the model, creating a surface layer that is saltier than observed. The results provide insight for climate model improvement with broad implications for Arctic sea ice and ecosystem dynamics.

58 GEOSCIENCES↗
DOE OSTI2021

A model for excess Johnson noise in superconducting transition-edge sensors

Transition-edge sensors (TESs) are two-dimensional superconducting films utilized as highly sensitive detectors of energy or power. These detectors are voltage biased in the superconducting-normal transition where the film resistance is both finite and a strong function of temperature. Unfortunately, the amount of electrical noise observed in TESs exceeds the predictions of existing noise theories. We describe a possible mechanism for the unexplained excess noise, which we term “mixed-down noise.” The source is Johnson noise, which is mixed down to low frequencies by Josephson oscillations in devices with a nonlinear current–voltage relationship. We derive an expression for the power spectral density of this noise and show that its predictions agree with measured data.

Wessels, Abigail (ORCID:0000000173918339)↗
DOE OSTI2026

Multi-physics Preconditioning for Thermally Activated Batteries

Thermal batteries, also known as molten-salt batteries, are single-use reserve power systems activated by pyrotechnic heat generation, which transitions the solid electrolyte into a molten state. The simulation of these batteries relies on multiphysics modeling to evaluate performance and behavior under various conditions. This paper presents advancements in scalable preconditioning strategies for the Thermally Activated Battery Simulator (TABS) tool, enabling efficient solutions to the coupled electrochemical systems that dominate computational costs in thermal battery simulations. We propose a hierarchical block Gauss-Seidel preconditioner implemented through the Teko package in Trilinos, which effectively addresses the challenges posed by tightly coupled physics, including charge transport, porous flow, and species diffusion. The preconditioner leverages scalable subblock solvers, including smoothed aggregation algebraic multigrid (SA-AMG) methods and domain-decomposition techniques, to achieve robust convergence and parallel scalability. Strong and weak scaling studies demonstrate the solver’s ability to handle problem sizes up to 51.3 million degrees of freedom on 2048 processors, achieving near sub-second setup and solve times for the end-to-end electrochemical solve. These advancements significantly improve the computational efficiency and turnaround time of thermal battery simulations, paving the way for higher-resolution models and enabling the transition from 2D axisymmetric to full 3D simulations.

25 ENERGY STORAGE↗
DOE OSTI2024

Transitioning from Simulation to Reality: Applying Chatter Detection Models to Real-World Machining Data

Chatter, a self-excited vibration phenomenon, is a critical challenge in high-speed machining operations, affecting tool life, product surface quality, and overall process efficiency. While machine learning models trained on simulated data have shown promise in detecting chatter, their real-world applicability remains uncertain due to discrepancies between simulated and actual machining environments. The primary goal of this study is to bridge the gap between simulation-based machine learning models and real-world applications by developing and validating a Random Forest-based chatter detection system. This research focuses on improving manufacturing efficiency through reliable chatter detection by integrating Operational Modal Analysis (OMA), Receptance Coupling Substructure Analysis (RCSA), and Transfer Learning (TL). The study applies a Random Forest classification model trained on over 140,000 simulated machining datasets, incorporating techniques like Operational Modal Analysis (OMA), Receptance Coupling Substructure Analysis (RCSA), and Transfer Learning (TL) to adapt the model for real-world operational data. The model is validated against 1600 real-world machining datasets, achieving an accuracy of 86.1%, with strong precision and recall scores. The results demonstrate the model’s robustness and potential for practical implementation in industrial settings, highlighting challenges such as sensor noise and variability in machining conditions. This work advances the use of predictive analytics in machining processes, offering a data-driven solution to improve manufacturing efficiency through more reliable chatter detection.

42 ENGINEERING↗
DOE OSTI2026

Chiral spin liquid and quantum phase transition in the triangular-lattice Hofstadter-Hubbard model

Recent advances in moiré engineering motivate the study of lattice models of strongly correlated electrons subjected to substantial orbital magnetic flux. We analyze the triangular-lattice Hofstadter-Hubbard model at one-quarter flux quantum per plaquette and a density of one electron per site, where a chiral spin liquid phase may exist between weak-coupling integer quantum Hall and strong-coupling 120° antiferromagnetic phases. Here, we use matrix product state methods and analytical arguments to investigate this model compactified to cylinders of finite circumference. We uncover a glide particle-hole symmetry operation which, we argue, is spontaneously broken at the quantum Hall to spin liquid transition on odd-circumference cylinders. We numerically verify the spontaneous symmetry breaking and further demonstrate that this transition is associated with algebraic long-range correlations of various spin-singlet, charge-neutral operators. For even-circumference cylinders, the transition becomes a crossover associated with a large correlation length that grows substantially with circumference. Our findings suggest that in the two-dimensional limit, the transition to a chiral spin liquid phase is continuous and features critical fluctuations of the current.

Divic, Stefan [University of Pennsylvania, Philade↗
DOE OSTI2023

Numerical Simulations of Carbon Dioxide Storage Efficiency in Heterogeneous Reservoir Models

The U.S. Department of Energy’s National Energy Technology Laboratory (DOE-NETL) has been developing methods and tools (the online Carbon Dioxide Storage prospeCtive Resource Estimation Excel aNalysis (CO2-SCREEN) tool) to estimate carbon dioxide (CO2) storage potential in subsurface reservoirs. The CO2 storage efficiency terms are input in the tool to calculate storage potential in targeted reservoirs. In this effort, two CO2 storage efficiency terms were evaluated: volumetric displacement ( E V ) and microscopic displacement ( E d ). The first term deals with efficiency of CO2 propagation into an accessible reservoir volume, while the second term evaluates effectiveness of native fluid displacement with CO2. The interpreted well logs and core sample measurements were applied to create the heterogeneous reservoir models including geostatistical realizations of porosity and intrinsic permeability fields. Supercritical CO2 was injected over the course of 30 years into brine-saturated reservoir models for clastics, limestone, and dolomite lithologies and deltaic fluvial, aeolian, shallow marine, and reef depositional environments by means of varying reservoir parameters and injection scenarios. The reservoir models providing vertically heterogeneous petrophysical properties and designated as “layered reservoir models” (with homogeneous parameters along each layer of the model) were not determined to be a transition between the homogeneous and heterogeneous models in respect to storage efficiency. Another finding shows that high-efficiency factors do not necessarily mean increased CO2 storage; they rather indicate that the available volume and pore space are more fully utilized. The CO2 storage efficiency factors were evaluated dynamically at the select time points using P 10 ‐ P 50 ‐ P 90 percentiles. The results of this study show that the P 10 ‐ P 90 distribution for volumetric efficiency is wider when compared to the microscopic efficiency. It was found that where dominant buoyancy forces drive the plume to the top of a target formation, the volumetric efficiency is low. Tighter sandstone and carbonate formations show prevalence of capillary forces and better utilization of reservoir volume.

Myshakin, Evgeniy M.↗