Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transient Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Dynamical response of the solar corona. III - Numerical simulation of the 1973 June 10 coronal transient

A spherically symmetric adiabatic single-fluid model is outlined for simulating the nonlinear time-dependent response of the corona to solar events that are simulated by perturbations in the appropriate physical variables from their steady-state values at the coronal base. Several observed features of the coronal transient that occurred on June 10, 1973, are simulated by using a particular steady-state solar wind, a specific combination of density and temperature perturbations, and a particular time dependence of the perturbations. A different steady-state solar wind, a perturbation of shorter duration, and other perturbation combinations are also employed to simulate the same transient so that the effect of each quantity can be determined. It is found that the model cannot adequately simulate all the observational results for the investigated transient, that the steady-state solar wind is relatively unimportant in such numerical simulations, and that studies which attempt only to reproduce observed shock trajectories may lead to erroneous conclusions regarding the physics of the solar event that produced the transient.

Steinolfson, R. S.↗
DOE OSTI2025

Assessing Dynamic Behaviors in Converter- Dominated Power Systems via RMS and EMT Simulations: A Study of Hawaii’s NELHA Microgrid

The transition from conventional power systems to converter-based microgrids has significantly advanced sustainability, clean energy integration, and operational reliability. However, this paradigm shift introduces operational challenges due to the intermittent nature of renewable energy sources and the non-linear characteristics of power electronic loads, inducing voltage fluctuations and harmonic distortions that complicate voltage and frequency regulation. Accurate dynamic modeling is hypothesized to be critical for capturing such effects, enabling reliable simulation and control strategy development. This study introduces an innovative dynamic modeling framework for a real-world converter-based microgrid, utilizing both root mean square (RMS) and electromagnetic transient (EMT) simulation methods. The microgrid was modeled in DIgSILENT PowerFactory, with simulations calibrated against high-resolution field measurements from SEL-735 power quality meters. Results show that RMS simulations effectively characterize steady-state dynamics, while EMT simulations are essential for capturing high-frequency transients and non-linear effects from photovoltaic inverters and variable frequency drives (VFDs). This complementary approach provides a comprehensive understanding of microgrid behavior, providing critical insights for improving simulation accuracy, advancing protection schemes, and improving resilience in future low-inertia power networks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1973

Transient response of rotor-bearing systems.

The equations of motion necessary to calculate the transient response of a multimass flexible rotor supported by nonlinear, damped bearings are derived from energy principles. Rotor excitation may be the result of imbalance, internal friction, rotor acceleration, nonlinear forces due to any number of bearing or seal stations, and gyroscopic couples developed from skewed disk effects. The method of solution for transient response simulation is discussed in detail and is based on extensive evaluation of numerical methods available for transient analysis. Examples of the application of transient response for the analysis of rotor bearing systems are presented and compared to actual machine performance. Recommendations for the use and extension of the present system simulation model are discussed.

Kirk, R. G.↗
NASA NTRS1993

Transient motion of a confined rarefied gas due to wall heating or cooling

The direct Monte Carlo method is used to simulate the transient motion of a confined rarefied gas as a container wall is rapidly heated or cooled. Results show that, for the rapid wall temperature changes, the gas response is better measured by an acoustic, rather than conduction, timescale, with steady state conditions being achieved after about ten wave crossing times.

Wadsworth, Dean C.↗
DOE OSTI2020

Intense Pulse Light Annealing of Perovskite Photovoltaics Using Gradient Flashes

Perovskite solar cells (PSCs) have been fabricated through high-speed and low-cost depositions but often require long annealing. Intense pulse light (IPL) can anneal thin films in seconds after deposition by inducing very high temperatures lasting for milliseconds, and multiple flashes can be used to tune the temperature profile. In this study, a gradient flash annealing (GFA) approach is introduced and compared to uniform flash annealing (UFA) by investigating the crystallinity, morphology, and phase evolution of the CH 3 NH 3 PbI 3 perovskite films and their impact on PSC performance. Unlike UFA, low-intensity pulsed irradiation during the pre-annealing stage of GFA played a significant role on enhancing the PSC performance by forming pure-phase CH 3 NH 3 PbI 3 perovskite thin films with superior morphology and high crystallinity. To understand the kinetics, a transient thermal simulation using ANSYS was developed and confirmed with an experimental setup. The results combined with microscopy and spectrophotometry were used to visualize how duration, delay time, photon flux, and flash count parameters participated in crystallization, phase, and morphology evolution. The IPL annealing induced rapid surface temperature increase, reaching as high as 800 °C, while produced well-developed and bound perovskite grains without any surface defects in an uncontrolled ambient environment with high humidity (>60%). The study resulted in PSCs with maximum efficiency and fill factor of 9.27 and 69.92% for the UFA and 11.75 and 68% when annealed through the GFA approach, respectively. Lastly, this work utilized IPL as the sole thermal source for post-deposition annealing to rapidly fabricate efficient PSCs in only 10 s, which opens the pathway for high-speed, low-cost, and large-scale automated fabrication of perovskite photovoltaics and semiconductors.

14 SOLAR ENERGY↗
DOE OSTI2023

Multi-Timescale Integrated Dynamics and Scheduling for Solar (MIDAS-Solar) (Final Technical Report)

Solar photovoltaic (PV) installations have experienced unprecedented growth in the United States. PV will become not only an energy producer but also a necessary provider of ancillary services at multiple timescales. Conventional methods to simulate power systems operations - such as long-term production simulation (which typically considers schedules from hours to minutes by using an optimization framework) and short-term transient studies (which simulate dynamics from seconds to sub-seconds using state variables and differential equations) - are not sufficient for studying the multiple-timescale variation of solar generation and its impact on system reliability. Long-term system economics and short-term system dynamics are highly coupled, particularly when the penetration level of renewable generation is extremely high, because the uncertainty and variability of solar generation will impact both power system steady-state and dynamic performance. This project helps meet and exceed the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Solar Energy Technologies Office goal of systems integration by directly addressing this stability and reliability challenge for power grid planning and operation. We have developed a temporally comprehensive, closed-loop simulation model, named Multi-timescale Integrated Dynamics and Scheduling (MIDAS), that seamlessly simulates power system operations from economic scheduling (day-ahead to hours) to dynamic response analysis (seconds to sub-seconds). For schedules with very high levels of inverter-based resources (IBRs), up to and including 100%, the stability of grid controls has been evaluated through electromagnetic transient (EMT) simulations and power-hardware-in-the-loop (PHIL) simulations of key transient events at key schedule points. Specifically, MIDAS provides: 1) a closed-loop simulation framework for simulating timescales from economic scheduling to dynamic stability analysis; 2) machine learning-based stability assessment; 3) EMT modeling and analysis for large-scale power systems; 4) MIDAS PHIL test bed. We worked with Hawaii Electric Companies to apply the MIDAS study framework to a Maui grid study. The entire island's transmission system was modeled in detail - from a yearly scheduling model, to a second-level frequency dynamic model, down to a sub-second-scale EMT model to address critical stability issues. The project demonstrated how MIDAS can help system planners and operators assess system reliability and stability while the power grid is marching toward a high-renewable, high-IBR future. In this Maui grid study, we found that 100% instantaneous IBR operation is achievable in EMT simulation and PHIL testing, and grid planners and operators might need new analysis/simulation tools to assess grid reliability and stability in the scheduling stage. MIDAS will bring Maui and other systems closer to 100% clean and stable energy futures. (In this study, we examined transient stability. Other topics necessary for 100% IBR operation, such as protection and resource adequacy, were not examined.)

100% Renewables↗
NASA NTRS1983

Modeling of transient disturbances in coronal-streamer configurations

Numerical simulations of the formation and propagation of mass ejection, loop transients in coronal streamers are discussed. The simulations are accomplished with numerical solutions of the single fluid, ideal MHD equations of motion in the meridional plane. The streamer is produced by simulating the relaxation of an initially radial hydrodynamic flow coupled with a dipole magnetic field. The simulated transient then results from an energy release at the base of the streamer. The legs of the loop transient produced remain essentially stationary while the loop expands mainly in the radial direction with velocities of 400 to 750 km s-1. Once the leading edge of the transient has passed out of the lower corona, the initial streamer configuration is restored after 15 to 24 hours. A second energy release 2 hours later than, and with an energy release identical to, the first does not produce a significant coronal disturbance.

Steinolfson, R. S.↗
DOE OSTI2020

Design tool for estimating metal hydride storage system characteristics for light-duty hydrogen fuel cell vehicles

The U.S. Department of Energy (DOE) has developed the Framework model to simulate fuel cell-based light-duty vehicle operation for various hydrogen storage systems. This transient model simulates the performance of the storage system, fuel cell, and vehicle for comparison to DOE's Technical Targets using four drive cycles. Metal hydride hydrogen storage models have been developed for the Framework model. Despite the utility of this model, it requires that material researchers input system design specifications that cannot be easily estimated. To confront this challenge, a design tool has been developed that allows researchers to directly enter physical and thermodynamic metal hydride properties into a simple sizing module that then estimates the systems parameters required to run the storage system model. This design tool can also be used as a standalone MS Excel model to estimate the storage system mass and volume outside of Framework and compare it to the DOE Technical Targets. This model will be explained and exercised with existing hydrogen storage materials.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Analysis of a Disturbance Event with Inverter-Based Resources Using EMT Simulations

Increasing penetration of inverter-based resources (IBRs) necessitates newer methods of planning and analysis of disturbances. The existing phasor-domain transient stability (TS) analysis may not capture the dynamics of IBRs during fault events. Here, in this paper, electromagnetic transient (EMT) simulations using high-fidelity detailed model of power grid and one of the affected photovoltaic (PV) plants during the Angeles Forest disturbance in 2018 are performed. In these simulations, the processes to develop EMT models of power grid from traditional phasor-domain TS data and PV plant from collected data are described. Thereafter, using these simulations, the response of the PV plant during the fault event in 2018 is replicated and a sensitivity analysis is performed. The sensitivity analysis consists of making changes to the components within the PV plant and in the power grid to evaluate the impact they have on the response observed by the PV plant during the fault event. This analysis provides an understanding of the components that impact the operation of a PV plant during fault events and provide guidance to system planners on the studies that need to be performed to maintain a reliable power grid as new IBR plants are integrated.

42 ENGINEERING↗
DOE OSTI2025

Impact of the delayed energy deposition in TREAT on transient dynamics

Estimating the energy released during a reactivity insertion accident (RIA) is of prime importance. TREAT is an experimental reactor designed to simulate these transients. Typically, models of these transients assume instantaneous energy deposition. However, a delayed energy deposition component exists. This work leverages the advanced capabilities of ALFRED, a high-fidelity Monte Carlo code for particle transport, to study the impact of this delayed component on RIA transient dynamics in TREAT. The study reveals that the delayed component can affect the energy released by up to $3\%$ for natural pulse transients. Understanding the impact of the delayed energy deposition component will enable the development of more accurate models, which will assist in designing experiments in TREAT and evaluating their safety.

73 - NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1976

Simulation of turbulent wall pressure

A computer program has been developed to simulate the transient wall pressure field produced by a low speed fully turbulent boundary layer. The theoretical basis for the simulation has been discussed and preliminary results from a pressure simulation are presented.

Ash, R. L.↗
NASA NTRS2000

Effect of Thermal Diffusivity on the Detectability of TNDE

The effect of thermal diffusively on the defect detectability in Carbon/Epoxy composite panels by transient thermography is presented in this paper. A series of Finite Element Models were constructed and analyzed to simulate the transient heat transfer phenomenon during Thermographic Non-destructive Evaluation (TNDE) of composite panels with square defects. Six common carbon fibers were considered. The models were built for composites with various combinations of fibers and volumetric ratios. Finite Element Analysis of these models showed the trends of the detectable range and the maximum thermal contrast versus the thermal diffusivity of various composites. Additionally, the trends of defect size to depth ratio and the thermal contrast has been investigated.

Zhao, Junduo↗
NASA NTRS1983

Conductive damping of coronal motions

Time-dependent motions in the solar corona are subject to modification through conductive transport of thermal energy away from compression regions and into rarefaction regions. The evolution depends on how the energy is introduced - by an essentially thermal perturbation or by a density perturbation. The net effect of thermal conduction is to convert local kinetic energy in the transient into widely distributed thermal energy, which then may in turn be partially converted into kinetic energy of the bulk flow. Local motion in the transient is thereby damped. These effects are modeled here using a numerical solution of the time-dependent solar wind equations for single-fluid thermally conductive flow. The simulations of transient phenomena are made for ordinary collisional thermal conduction and compared with similar simulations done using polytropic flow. Between one and five solar radii, the gross character in the two cases is very similar. However, there are effects with thermal conduction that cannot be modeled with polytropic flow, illustrated here by temperature and velocity forerunners and a delayed and large-amplitude trailing velocity low. If thermal conduction is artificially inhibited by simple reduction of the thermal conduction coefficient, relative velocity amplitudes remain larger in approximate proportion to the amount the coefficient is reduced.

Suess, S. T.↗
NASA NTRS1994

Simulation of Unsteady Combustion in a Ramjet Engine Using a Highly Parallel Computer

Combustion instability in ramjets is a complex phenomenon that involve nonlinear interaction between acoustic waves, vortex motion and unsteady heat release in the combustor. To numerically simulate this 3-D, transient phenomenon, enormous computer resources (time, memory and disk storage) are required. Although current generation vector supercomputers are capable of providing adequate resources for simulations of this nature, their high cost and limited availability, makes such machines less than satisfactory for routine use. The primary focus of this study is to assess the feasibility of using highly parallel computer systems as a cost-effective alternative for conducting such unsteady flow simulations. Towards this end, a large-eddy simulation model for combustion instability was implemented on the Intel iPSC/860 and a careful study was conducted to determine the benefits and the problems associated with the use of such machines for transient simulations. Details of this study along with the results obtained from the unsteady combustion simulations carried out on the iPSC/860 are discussed in this paper.

Menon, Suresh↗
DOE OSTI2025

Integrated Multi-Fidelity Model and Co-Simulation Platform for Distribution System Transient and Dynamic Analysis—DistribuDyn

As inverter-based, distributed energy resources (DERs) and variable loads continue to proliferate across distribution systems, it is increasingly important to understand their impacts on system stability and reliability. However, most commercially available simulation tools for distribution planning primarily focus on steady-state and quasi-steady state analysis, offering limited capabilities to study transient and dynamic behaviors.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Impact Analysis of High-Altitude Electromagnetic Pulse Coupling Effects on Power Grid Protection Relays

Protection relays are important equipment used for protection, control, and metering functions in the power grid. These relays are used to protect critical and difficult-to-replace equipment, like generators, transformers, and capacitor banks. Once the protection devices are disturbed or damaged, a high risk of power generation interruption occurs. Therefore, it is important and necessary to study the relay’s immunity to electromagnetic pulse (EMP) events. As a preliminary step toward empirical experimentation on actual equipment, this manuscript outlines an economical and efficient methodology for evaluating the impact of an EMP. An impedance measurement strategy was employed to model the equipment, setting the stage for subsequent immunity analyses. These analyses included the pulse current injection (PCI) method, which utilized an injecting probe to introduce the transient, and frequency domain electromagnetic (FEKO) simulation, which integrated electromagnetic coupling effects into the transient simulation. The impedance measurement and simulation results in this paper provide a reliable basis for gauging equipment performance in the face of HEMP threats. The results obtained using the PCI and FEKO simulations demonstrated the performance of different port responses under a high-altitude EMP, indicating the requirement for some protection to ensure the reliable operation of relays.

42 ENGINEERING↗