SEARCH · Engineering Papers

Results for “Three dimensional motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Vortices in magnetospheric plasma flow

Vortical motion in the early morning sector of the plasma sheet was detected by means of two-dimensional and three-dimensional plasma measurements obtained by the LASL/MPI analyzers on the ISEE 1 and 2 satellites. The vortices, when present, are manifested as a recurrent or continuing rotation of the bulk flow vector in a plane sometimes moderately inclined with respect to the ecliptic plane. The preferred sense of the rotation is clockwise when viewed from above the ecliptic plane. The vortex rotation period ranges from 5 to 20 min., and several rotations can occur in a relatively uninterrupted sequence. The plasma vortices are estimated to be several earth radii in size. The possibility of a 'vortex street' convecting earthward along the axis of the magnetotail is considered.

Hones, E. W., Jr.↗

NASA NTRS1986

An analysis of finite-difference and finite-volume formulations of conservation laws

Finite-difference and finite-volume formulations are analyzed in order to clear up the confusion concerning their application to the numerical solution of conservation laws. A new coordinate-free formulation of systems of conservation laws is developed, which clearly distinguishes the role of physical vectors from that of algebraic vectors which characterize the system. The analysis considers general types of equations--potential, Euler, and Navier-Stokes. Three-dimensional unsteady flows with time-varying grids are described using a single, consistent nomeclature for both formulations. Grid motion due to a non-inertial reference frame as well as flow adaptation is covered. In comparing the two formulations, it is found useful to distinguish between differences in numerical methods and differences in grid definition. The former plays a role for non-Cartesian grids, and results in only cosmetic differences in the manner in which geometric terms are handled. The differences in grid definition for the two formulations is found to be more important, since it affects the manner in which boundary conditions, zonal procedures, and grid singularities are handled at computational boundaries. The proper interpretation of strong and weak conservation-law forms for quasi-one-dimensional and axisymmetric flows is brought out.

Vinokur, Marcel↗

NASA NTRS1989

An analysis of finite-difference and finite-volume formulations of conservation laws

Finite-difference and finite-volume formulations are analyzed in order to clear up the confusion concerning their application to the numerical solution of conservation laws. A new coordinate-free formulation of systems of conservation laws is developed, which clearly distinguishes the role of physical vectors from that of algebraic vectors which characterize the system. The analysis considers general types of equations: potential, Euler, and Navier-Stokes. Three-dimensional unsteady flows with time-varying grids are described using a single, consistent nomenclature for both formulations. Grid motion due to a non-inertial reference frame as well as flow adaptation is covered. In comparing the two formulations, it is found useful to distinguish between differences in numerical methods and differences in grid definition. The former plays a role for non-Cartesian grids, and results in only cosmetic differences in the manner in which geometric terms are handled. The differences in grid definition for the two formulations is found to be more important, since it affects the manner in which boundary conditions, zonal procedures, and grid singularities are handled at computational boundaries. The proper interpretation of strong and weak conservation-law forms for quasi-one-dimensional and axisymmetric flows is brought out.

Vinokur, Marcel↗

NASA NTRS1991

Interaction dynamics of on-orbit construction

Deployment and assembly of large structures in orbit is a critical technology to the overall problem of orbital construction. The attendant large configuration changes of structures will cause significant changes in the dynamic characteristics of the entire system, and perturbation to the orbital dynamics of the spacecraft from which the structures are deployed and/or assembled. To better design structures for deployment and assembly, and to better design controlled deployment/assembly processes, accurate modeling techniques are absolutely essential. The problem of modeling the dynamics of deploying and retrieving beam-like structures from a rotating base was addressed. A methodology for discrete modeling, and a computational procedure were developed. These results give us the capability of understanding and predicting the effects on the overall satellite motion of deploying flexible appendages. This is an initial step towards a general capability of treating axially moving three-dimensional beams. The interaction dynamics of the orbiter, its flexible manipulator, and the structures to be assembled/deployed, as a prerequisite in order to simulate incremental in-space structural construction processes are investigated. Preliminary results so obtained indicate that, as the inertia properties of the flexible large space structure under construction change during the space assembly/construction process, the interaction dynamics undergo significant changes in their characteristics, thus revealing the need for a variety of control strategies throughout construction.

Park, K. C.↗

NASA NTRS1994

2-D and 3-D oscillating wing aerodynamics for a range of angles of attack including stall

A comprehensive experimental investigation of the pressure distribution over a semispan wing undergoing pitching motions representative of a helicopter rotor blade was conducted. Testing the wing in the nonrotating condition isolates the three-dimensional (3-D) blade aerodynamic and dynamic stall characteristics from the complications of the rotor blade environment. The test has generated a very complete, detailed, and accurate body of data. These data include static and dynamic pressure distributions, surface flow visualizations, two-dimensional (2-D) airfoil data from the same model and installation, and important supporting blockage and wall pressure distributions. This body of data is sufficiently comprehensive and accurate that it can be used for the validation of rotor blade aerodynamic models over a broad range of the important parameters including 3-D dynamic stall. This data report presents all the cycle-averaged lift, drag, and pitching moment coefficient data versus angle of attack obtained from the instantaneous pressure data for the 3-D wing and the 2-D airfoil. Also presented are examples of the following: cycle-to-cycle variations occurring for incipient or lightly stalled conditions; 3-D surface flow visualizations; supporting blockage and wall pressure distributions; and underlying detailed pressure results.

Piziali, R. A.↗

NASA NTRS1997

Smart Test Machines

Vern Wedeven, president of Wedeven Associates, developed the WAM4, a computer-aided "smart" test machine for simulating stress on equipment, based on his bearing lubrication expertise gained while working for Lewis Research Center. During his NASA years from the 1970s into the early 1980s, Wedeven initiated an "Interdisciplinary Collaboration in Tribology," an effort that involved NASA, six universities, and several university professors. The NASA-sponsored work provided foundation for Wedeven in 1983 to form his own company. Several versions of the smart test machine, the WAM1, WAM2, and WAM3, have proceeded the current version, WAM4. This computer-controlled device can provide detailed glimpses at gear and bearing points of contact. WAM4 can yield a three-dimensional view of machinery as an operator adds "what-if" thermal and lubrication conditions, contact stress, and surface motion. Along with NASA, a number of firms, including Pratt & Whitney, Caterpillar Tractor, Exxon, and Chevron have approached Wedeven for help on resolving lubrication problems.

Source record↗

NASA NTRS2003

Monitoring of Observation Errors in the Assimilation of Satellite Ozone Data

The stratospheric ozone layer protects life on Earth from the harmful effects of solar ultravioiet radiation. The ozone layer is currently in a fragile state because of depletion caused by man-made chemicals, especially chlorofluorocarbons. The state of the ozone layer is being monitored and evaluated by scientific experts around the world, in order to help policy makers assess the impacts of international protocols that control the production and release of ozone depleting chemicals. Scientists use a variety ozone measurements and models in order to form a comprehensive picture about the current state of the ozone layer, and to predict the future behavior (expected to be a recovery, as the abundance of the depleting chemicals decreases). Among the data sets used, those from satellite-borne instruments have the advantage of providing a wealth of information about the ozone distribution over most of the globe. Several instruments onboard American and international satellites make measurements of the properties of the atmosphere, from which atmospheric ozone amounts are estimated; long-term measurement programs enable monitoring of trends in ozone. However, the characteristics of satellite instruments change in time. For example, the instrument lenses through which measurements are made may deteriorate over time, or the satellite orbit may drift so that measurements over each location are made later and later in the day. These changes may increase the errors in the retrieved ozone amounts, and degrade the quality of estimated ozone amounts and of their variability. Our work focuses on combining the satellite ozone data with global models that capture atmospheric motion and ozone chemistry, using advanced statistical techniques: this is known as data assimilation. Our method provides a three-dimensional global ozone distribution that is consistent with both the satellite measurements and with our understanding of processes (described in the models) that control ozone distribution. Through the monitoring of statistical properties of the agreement between the data and the model, this approach also enables us to detect changes in the quality of ozone data retrieved from satellite-borne instrument measurements. This paper demonstrates that calculations of the changes in satellite data quality, and the impact these changes on the estimates of the global ozone distribution, can assist in maintaining the uniform quality of the satellite ozone data throughout the lifetime of these instruments, thus contributing to our understanding of long-term ozone change.

Stajner, Ivanka↗

NASA NTRS2004

A 3D Convective Model for the Jovian Wind Bands

In an earlier paper, we proposed that Jupiter's alternating wind bands are a manifestation of the global interaction between rotation and convection in a shallow layer. The model, however, was obtained from linearization of the 2D equations of motions. At HKUST/Hong Kong, we are now trying to study this problem by rigorous numerical simulation. Using a three-dimensional spectral numerical code, we compute models for the outermost layer of Jupiter's convective envelope. Two cases have been studied. In one the atmospheric pressure varies from 1 to 23 bar, and in the other from 1 to 115 bar. The physical parameters (internal energy flux, rotation rate) are chosen to be close to those expected, but solar heating, chemistry, as well as dynamical influences from deeper layers are ignored. The models generate wind field patterns that contain alternating jet streams with resemblance to the Jovian bands. Instantaneous values of the mean zonal flow at the equator reach 80 m/sec. Yet the mean meridional flows are less than 1% of such value. The meridional temperature profile at the cloud top level also shows a double hump structure of a few degrees (as observed) in the subtropics. Though there is not complete quantitative agreement (caused perhaps by neglected effects like solar radiation), these models demonstrate, in principle, the feasibility of generating a Jovian type wind pattern through the interaction of fast rotation and convection in a thin shell.

Mayr, H. G.↗

NASA NTRS1950

Hydrodynamic Properties of Planing Surfaces and Flying Boats

The study of the hydrodynamic properties of planing bottom of flying boats and seaplane floats is at the present time based exclusively on the curves of towing tests conducted in tanks. In order to provide a rational basis for the test procedure in tanks and practical design data, a theoretical study must be made of the flow at the step and relations derived that show not only qualitatively but quantitatively the inter-relations of the various factors involved. The general solution of the problem of the development of hydrodynamic forces during the motion of the seaplane float or flying boat is very difficult for it is necessary to give a three-dimensional solution, which does not always permit reducing the analysis to the form of workable computation formulas. On the other had, the problem is complicated by the fact that the object of the analysis is concerned with two fluid mediums, namely, air and water, which have a surface of density discontinuity between them. The theoretical and experimental investigations on the hydrodynamics of a ship cannot be completely carried over to the design of floats and flying-boat hulls, because of the difference in the shape of the contour lines of the bodies, and, because of the entirely different flow conditions from the hydrodynamic viewpoint.

Sokolov, N. A.↗

NASA NTRS1991

Fourier functional analysis for unsteady aerodynamic modeling

A method based on Fourier analysis is developed to analyze the force and moment data obtained in large amplitude forced oscillation tests at high angles of attack. The aerodynamic models for normal force, lift, drag, and pitching moment coefficients are built up from a set of aerodynamic responses to harmonic motions at different frequencies. Based on the aerodynamic models of harmonic data, the indicial responses are formed. The final expressions for the models involve time integrals of the indicial type advocated by Tobak and Schiff. Results from linear two- and three-dimensional unsteady aerodynamic theories as well as test data for a 70-degree delta wing are used to verify the models. It is shown that the present modeling method is accurate in producing the aerodynamic responses to harmonic motions and the ramp type motions. The model also produces correct trend for a 70-degree delta wing in harmonic motion with different mean angles-of-attack. However, the current model cannot be used to extrapolate data to higher angles-of-attack than that of the harmonic motions which form the aerodynamic model. For linear ramp motions, a special method is used to calculate the corresponding frequency and phase angle at a given time. The calculated results from modeling show a higher lift peak for linear ramp motion than for harmonic ramp motion. The current model also shows reasonably good results for the lift responses at different angles of attack.

Lan, C. Edward↗

NASA NTRS1991

Fourier functional analysis for unsteady aerodynamic modeling

Chin, Suei↗

NASA NTRS2002

Two- and Three-Dimensional Numerical Experiments Representing Two Limiting Cases of an In-Line Pair of Finger Seal Components

The work presented here concerns the numerical development and simulation of the flow, pressure patterns and motion of a pair of fingers arranged behind each other and axially aligned in-line. The fingers represent the basic elemental component of a Finger Seal (FS) and form a tight seal around the rotor. Yet their flexibility allows compliance with rotor motion and in a passive-adaptive mode complies also with the hydrodynamic forces induced by the flowing fluid. While the paper does not treat the actual staggered configuration of a finger seal, the inline arrangement represents a first step towards that final goal. The numerical 2-D (axial-radial) and 3-D results presented herein were obtained using a commercial package (CFD-ACE+). Both models use an integrated numerical approach, which couples the hydrodynamic fluid model (Navier-Stokes based) to the solid mechanics code that models the compliance of the fingers.

Braun, M. J.↗

NASA NTRS1973

Control law synthesis and sensor design for active flutter suppression.

Methods are presented for representing unsteady aerodynamic loadings, valid for arbitrary motion, for the two-dimensional typical section with a trailing-edge control surface in incompressible flow and a three-dimensional lifting surface with leading- or trailing-edge control surfaces in subsonic compressible flow. Loads for the two-dimensional incompressible case are obtained via analytic continuation of the Theodorsen function into the complex plane, with guidance from a time-domain approximation of the Wagner indicial function. For the three-dimensional case, it is proposed that oscillatory generalized aerodynamic forces be approximated by Pade fractions, thereby permitting an obvious continuation into the complex plane. A theoretical justification for this procedure is briefly outlined, and some practical aspects of its implementation are discussed.

Lyons, M. G.↗

NASA NTRS1974

Inclusion of known integrals in the optimal trajectory problem

The classical problem of determination of the rocket trajectory which minimizes mass expenditure during motion between two points in the field of a single gravitating body is analyzed. The known integrals of the system are incorporated into the adjoint equations resulting in a reduction from a seventh-order adjoint system to a third-order adjoint system. The first case which is treated in that of planar motion under specific end conditions. In this case a regularization of the recently derived equations is achieved. The general three-dimensional case is also reduced from a seventh-order adjoint system to a third-order adjoint system. In this case a regularization has not been found.

Burns, R. E.↗

NASA NTRS1975

A three-dimensional dynamical-chemical model of atmospheric ozone

A three-year integration of a global three-dimensional model including dynamics and simple photochemistry is used to predict ozone. Good agreement with observation is obtained for stratospheric motion patterns, meridional circulations, ozone density as a function of height and latitude, eddy transports of ozone, surface destruction of ozone, and correlations of ozone with other variables. The annual cycle of columnar ozone in high latitudes is present, but at a smaller amplitude than observed. Vertical transport of ozone downward from the main generation level at 30 km is accomplished primarily by small-scale eddy diffusion between 20 and 30 km and again near the ground; large-scale vertical transport dominates in between. The model predicts a secondary maximum in ozone mixing ratio at 45 km somewhat equatorward of the winter polar-night zone. This feature, recently observed from satellite measurements, is thought to be caused by the temperature dependence of reaction rates in the Chapman scheme. The principal deficiency of the model is an underprediction of the spring ozone concentration in high latitudes in the lower stratosphere.

Cunnold, D.↗

NASA NTRS1985

Recent investigations on disk galaxies in massive halos

The dynamic evolution of a disk embedded in an oblate spheroidal galaxy is investigated by means of numerical simulations performed at NASA Ames, involving self-consistent fully three-dimensional integration of 100,000-body systems. A flat disk containing 1000 particles (of equal mass and with no random motion), with its center coincident with the center of the oblate spheroid and at an angle of 30, 60, or 90 deg to the spheroid equatorial plane is started in differential rotation. The results are presented graphically and discussed in detail. The galaxy center is found to shift so that the disk center orbits about it, in a complex motion with nutation, rotation, and precession; warping of the disk is also observed. The possible connections between these findings and observations of complex motions at the Galactic center are considered.

Miller, R. H.↗

NASA NTRS1992

Prediction and control of slender-wing rock

The unsteady Euler equations and the Euler equations of rigid-body dynamics, both written in the moving frame of reference, are sequentially solved to simulate the limit-cycle rock motion of slender delta wings. The governing equations of the fluid flow and the dynamics of the present multidisciplinary problem are solved using an implicit, approximately-factored, central-difference-like, finite-volume scheme and a four-stage Runge-Kutta scheme, respectively. For the control of wing-rock motion, leading-edge flaps are forced to oscillate anti-symmetrically at prescribed frequency and amplitude, which are tuned in order to suppress the rock motion. Since the computational grid deforms due to the leading-edge flaps motion, the grid is dynamically deformed using the Navier-displacement equations. Computational applications cover locally-conical and three-dimensional solutions for the wing-rock simulation and its control.

Kandil, Osama A.↗

NASA NTRS1991

Path planning algorithms for assembly sequence planning

Planning for manipulation in complex environments often requires reasoning about the geometric and mechanical constraints which are posed by the task. In planning assembly operations, the automatic generation of operations sequences depends on the geometric feasibility of paths which permit parts to be joined into subassemblies. Feasible locations and collision-free paths must be present for part motions, robot and grasping motions, and fixtures. This paper describes an approach to reasoning about the feasibility of straight-line paths among three-dimensional polyhedral parts using an algebra of polyhedral cones. A second method recasts the feasibility conditions as constraints in a nonlinear optimization framework. Both algorithms have been implemented and results are presented.

Krishnan, S. S.↗