Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Technology Evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Conceptual Design and Performance Considerations for Superconducting Magnets in the Material Plasma Exposure eXperiment

An important step toward the advent of nuclear fusion as a future power source is the development of plasmafacing materials that can function as designed for a long period of time. While ITER and other devices including Wendelstein 7-X and the Joint European Torus will provide insight into divertor and first wall performance, a dedicated device to advance the understanding of material performance in the representative plasma environments is needed. The Material Plasma Exposure eXperiment has been proposed as a linear plasma device to generate and to direct fusion reactor-like plasma energy and particle flux at the target materials with electron temperatures of 1-15 eV and electron densities of 10 20 -10 21 m -3 . Given that the requirements for radio frequency (RF) heating on-axis field are no greater than 2.5 T and the warm bore diameters must be between 60 cm and 1.5 m, the conceptual design was developed for the experiments on a set of superconducting magnets carried out using commercially available NbTi superconductors. This conceptual design evaluated the cryogenic heat loads, mechanical loads, and quench protection to ensure that the current design is compatible with current technologies. In addition, an alternative evaluation of this design relative to ReBCO high-temperature superconducting magnets determined the conditions under which these technologies could be advantageous.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The Role of Low-Carbon Fuels and Carbon Capture in Decarbonizing the U.S. Clinker Manufacturing for Cement Production: CO2 Emissions Reduction Potentials

Low-carbon fuels, feedstocks, and energy sources can play a vital role in the decarbonization of clinker production in cement manufacturing. Fuel switching with renewable natural gas, green hydrogen, and biomass can provide a low-carbon energy source for the high-temperature process heat during the pyroprocessing steps of clinker production. However, up to 60% of CO2 emissions from clinker production are attributable to process-related CO2 emissions, which will need the simultaneous implementation of other decarbonization technologies, such as carbon capture. To evaluate the potential of fuel switching and carbon capture technologies in decarbonizing the cement industry, a study of the facility-level CO2 emissions is necessary. This study evaluates the potential for using a single low-carbon fuel as an energy source in clinker production for cement manufacturing compared to conventional clinker production (which uses a range of fuel mixes). In addition, conventional carbon capture (operated with natural gas-based steam for solvent regeneration) and electrified carbon capture configurations were designed and assessed for net-zero emission targets. Carbon emissions reductions with and without biogenic emissions credits were analyzed to ascertain their impact on the overall carbon accounting. Results show that carbon emissions intensity of cement can vary from 571 to 784 kgCO2eq/metric ton of cement without carbon capture and from 166.33 to 438.66 kgCO2eq/metric ton of cement with carbon capture. We find that when biogenic carbon credits are considered, cement production with a sustainably grown biomass as fuel source coupled with conventional carbon capture can lead to a net-negative emission cement (−271 kgCO2eq/metric ton of cement), outperforming an electrified capture design (35 kgCO2eq/metric ton of cement). The carbon accounting for the Scope 1, 2, and biogenic emissions conducted in this study is aimed at helping researchers and industry partners in the cement and concrete sector make an informed decision on the choice of fuel and decarbonization strategy to adopt.

42 ENGINEERING↗
DOE OSTI2023

Variable renewable energy deployment in low-emission scenarios: The role of technology cost and value

While rapid deployment of variable renewable energy (VRE) technologies, namely wind and solar PV, is often projected in 2C pathways generated by integrated assessment models, there is a wide range in projected VRE deployment by mid-century. Such differences could be the result of differences in assumptions about future technology costs and/or differences in model approaches for capturing other aspects of technology competitiveness. Here we introduce a consistent competitiveness metric, profitability-adjusted levelized cost of electricity (or PLCOE), to an integrated assessment model (EPPA) to evaluate the representation of technology competition, including VRE, in low-emission scenarios. We show that representing the value of technology (alongside cost) may significantly impact VRE deployment relative to scenarios without such an adjustment. In addition, we show that varying VRE costs by about 35% in 2050 results in differences in VRE deployment that span much of the range in outcomes (over the same period) observed in likely 2C scenarios assessed by the IPCC, suggesting that both cost and value are key drivers of VRE deployment in such scenarios. Given the central role that VRE technologies play in the electricity mix across most scenarios, we also find that alternative cost assumptions for VRE technologies can lead to changes in electricity prices, the associated demand for electricity, and total final and primary energy consumption. However, the demand for fuels other than electricity is relatively insensitive to VRE assumptions in the 2C scenarios considered here.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Evaluation of the Turbine Integrated Mortality Reduction (TIMR SM ) Technology as a Smart Curtailment Approach (Final Summary Report)

Wind energy is a crucial technology for achieving net-zero emissions by 2050. However, the growth and deployment of wind energy in North America have led to the deaths of many bat species due to operating wind turbines. Hundreds of thousands of bats are estimated to die at wind turbines annually in North America. Operational minimization, which includes feathering turbine blades and curtailment, has been documented to reduce bat fatality effectively. Curtailment refers to altering turbine operation based on wind speed, time of year, temperature, sensors, and activity models. However, when turbines are curtailed, they do not generate power, resulting in energy loss and revenue for wind energy facilities. The Electric Power Research Institute (EPRI) funded the development of Turbine Integrated Mortality Reduction (TIM SM ) Technology, which curtails turbine operation when bats are detected. The initial TIMR system research showed promising results, with an 85% reduction in overall bat fatalities and a 91% reduction for the little brown bat. However, these results were based on a single site during one fall season, and it was unclear if similar results could be replicated at other wind energy facilities. This research aimed to validate the TIMR system results from the prior field study at a second site in the U.S., estimate the power production and reduction in bat mortality at turbines with installed TIMR systems relative to blanket curtailment and fully operational turbines, test the TIMR system in two calendar years and during the summer and fall periods, and evaluate the operational and commercial characteristics of the TIMR system for potential wind industry adoption. The study was conducted at a 500.9-MW wind energy facility in southeast Adair County, Iowa. Three experimental treatments were involved in this randomized block design study: TIMR, Curtailment at 5.0 m/s, and Normal Operation. In 2021, three treatments were used at 18 turbines, expanding to four treatments across 36 turbines in 2022. The TIMR system worked as designed throughout the entire study; however, because of unexpected wind turbine operational challenges in 2021, there was not sufficient sample size to evaluate the treatment differences. In 2022, there were significant differences in fatality levels between treatment types and normal operating turbines. Curtailment at 5.0 m/s reduced fatalities by 30.8% compared to normal operations, and TIMR decreased fatalities by 48.6% compared to normal operations. Two different methods were used to evaluate the differences in energy loss for each treatment. The TIMR system resulted in 1.3% to 1.6 % annual energy loss in 2021 and 1.0% to 1.2 % in 2022. The Curtailment at 5.0 m/s resulted in 0.6% to 0.8 % annual energy loss in 2021 and 0.5% to 0.6 % in 2022. The project achieved all the stated objectives and demonstrated that TIMR is an effective technology that balances bat fatality reduction with energy generation. The results will support the deployment of TIMR and other acoustic sensor-based technologies. The research provides valuable insights into the impact of different treatments on fatality rates and energy outputs, contributing to the ongoing efforts to mitigate the environmental impact of wind energy.

17 WIND ENERGY↗
DOE OSTI2020

Comparison of loads from HAWC2 and OpenFAST for the IEA Wind 15 MW Reference Wind Turbine

Reference wind turbines (RWTs) that reflect the state-of-the-art of current wind energy technology are necessary in order to properly evaluate innovative methods in wind turbine design and evaluation. The International Energy Agency (IEA) Wind Technology Collaboration Platform (TCP) Task 37 has recently developed a new RWT geared towards offshore floating-foundation applications: the IEA Wind 15 MW. The model has been implemented in two aeroelastic codes, OpenFAST and HAWC2, based on an underlying common ontology. However, these toolchains result in slightly different structural parameters, and the two codes utilise different structural models. Thus, to increase the utility of the model, it is necessary to compare the aeroelastic responses. This paper compares aeroelastic loads calculated using different fidelities of the blade model in OpenFAST (ElastoDyn and BeamDyn) and HAWC2 (prismatic Timoshenko without torsion and Timoshenko with fully populated stiffness matrix), where both codes use the DTU Basic controller and the same turbulence boxes to reduce discrepancies. The aeroelastic responses to steady wind, step wind and turbulent wind (per IEC 61400-1 wind class IB) are considered. The results indicate a generally good agreement between the loads dominated by aerodynamic thrust and force, especially for the no-torsion blade models. Discrepancies were observed in other load channels, partially due to differences in the asymmetric loading of the rotor and partially due to differing closed-loop dynamics, and they will be the subject of future investigations.

17 WIND ENERGY↗
DOE OSTI2021

Daikin Advanced Lithium Ion Battery Technology - High Voltage Electrolyte

An evaluation of high voltage electrolytes which contain fluorochemicals as either co-solvents or additives has been completed. The project objective was to identify a cell chemistry and electrolyte formulation which is capable of operating at 4.6 V. Stable cycle performance has been demonstrated in LiNi0.50Mn0.30Co0.20O2 (NMC532)/Artificial Graphite pouch cells to 4.6 V, with a discharge capacity retention greater than 80% after 300 cycles. A multitude of physical and chemical changes between 4.2 and 4.6V were investigated, with the goal of correlating identified degradation mechanisms with premature cell failure.

25 ENERGY STORAGE↗
DOE OSTI2023

Technical Assessment of Potential Climate Impact and Economic Viability of Biochar Technologies for Small-Scale Agriculture in the Pacific Northwest

The goal of this study is to evaluate the state of biochar technology and determine the feasibility of integrating small-scale biochar production in ways that benefit smaller, diversified producers. Because of the emergence of carbon markets, this innovative climate and agricultural solution may be financed externally, making biochar more accessible to the growers that could benefit. In this report, we review the current state of biochar technology (Section 2), methods for assessing the potential climate impacts derived from its implementation (Section 3), and the current state of carbon-offset mechanisms for biochar technology (Section 4). In Section 5, we apply this knowledge to several specific biochar technology scenarios involving combinations of different feedstocks, production methods, and economic incentives to arrive at estimates of climate-mitigation impacts and costs per carbon credit generated. We conclude with a summary in Section 6.

09 BIOMASS FUELS↗
DOE OSTI2024

DISH-STARS™ Commercialization (Abstract)

The goal of this project is to aggressively support the near-term commercialization of a new technology platform – based on the integration of solar concentrators and micro- and meso-channel process technology (MMPT) – that was evaluated and identified as a strong candidate for near-term commercialization at EERE’s inaugural Lab-Corps program during early FY2016. Known as STARS, for Solar Thermochemical Advanced Reactor System, or Dish-STARS™ when paired with parabolic dish concentrators, STARS is a promising energy-related technology developed at the Pacific Northwest National Laboratory (PNNL) that efficiently converts solar energy into chemical energy. Combined with economies through hardware mass production, the efficiency of Dish-STARS™ provides a near-term opportunity for the production of renewable electricity, fuels and chemicals. This proposed CRADA project supports the commercialization of Dish-STARS™ in these important ways: The project will support the cooperative development of Dish-STARS™ by the DOE national laboratory and private partners, including the startup company, STARS Corporation, that is being established by the PNNL Lab-Corps team that evaluated STARS on behalf of EERE. The project will provide important transition funding at the time that the previous DOE SunShot project, which has supported Dish-STARS™ development from Technology Readiness Level 3 (TRL 3) to TRL 6, is scheduled to end.

14 SOLAR ENERGY↗
DOE OSTI2026

Cross-sectoral impact of emerging technologies on U.S. manufacturing resilience and competitiveness

Introducing new technologies in one energy-intensive industry can affect how other industries operate and stay resilient, yet these cross-sector interactions are often underappreciated in conventional technology roadmaps. In practice, industrial systems do not evolve in isolation. They are linked through shared upstream and downstream dependencies, such as electricity and fuel supply, critical materials, transportation networks, and enabling infrastructure. As a result, large-scale technology deployment in one sector can reshape resource availability, infrastructure demand, and operational risk in others. These interdependencies mean that technology deployment decisions in one sector can create unintended bottlenecks or cascading benefits in others. Here, this article argues that a cross-sector, system-of-systems perspective is essential for evaluating and scaling emerging technologies in energy-intensive industries. By framing industrial transformation as an interconnected systems challenge rather than a set of isolated sectoral decisions, the study highlights how interdependence shapes technology feasibility, adoption pathways, and resilience outcomes. The article illustrates how cross-sector linkages can amplify both risks and benefits, and it emphasizes the importance of integrated planning approaches that account for shared dependencies, cascading impacts, and co-optimization opportunities. Adopting this broader perspective can support more robust technology roadmaps, improve strategic coordination across industries, and strengthen the long-term resilience of the industrial sector as a whole.

Nain, Preeti [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2023

Technology Acceptance Workshop Meeting Proceedings, April 20-29, 2022

The Renewable Energy Wildlife Institute and the National Renewable Energy Laboratory convened a virtual workshop facilitated by the Consensus Building Institute in April 2022 to identify recommendations on how to accelerate the rate of research and development, evaluation, and adoption of technologies for monitoring or minimizing wildlife impacts from wind energy. The workshop drew on expertise from stakeholder groups including technology developers, federal agencies, conservation nonprofits, and the wind industry. Over the course of four sessions, participants discussed incentives and barriers to technology development beginning with early field testing and validation, through full-scale experimental deployment, and finally broad-scale acceptance and commercial deployment.

17 WIND ENERGY↗
DOE OSTI2023

Chapter 8 - Testing and Evaluation Methods for Protection Systems

In this chapter, we aim to present different approaches used formally and informally for the evaluation of protection devices and schemes. This chapter starts with presenting background on generalization of protection device components, followed by the resources necessary to evaluate the protection system. Further, this chapter presents the different approaches used in protection evaluation with their advantages and disadvantages. Finally, this chapter closes by presenting background on technology readiness level metrics. Technology readiness level metric is borrowed from the space industry for the purpose of comparing the maturity of the different protection technologies and using the appropriate evaluation methods from the list presented here.

power systems↗
DOE OSTI2025

Evaluating the potential of plastic waste upcycling using thermochemical technologies: A case study in Spain

A plastic waste upcycling value chain model has been applied to assess the potential of processing packaging waste in Spain using thermo-chemical technologies to produce low-density polyethylene (LDPE) and polypropylene (PP), which are highly valuable materials. The model projects an annual profit of 120.6 M$\$$/yr, with a capital investment of 789.3 M$\$$, generating 3285 jobs and contributing 65.5 M$\$$/yr to Spain’s economy. The achieved circularity rate of the waste processing infrastructure exceeds 40 %, incorporating recycled HDPE and PET. Despite these advantages, regulatory gaps and market hesitancy toward recycled materials due to quality concerns hinder adoption. Additionally, economies of scale remain underutilized in Spain due to lower plastic waste collection levels compared to countries such as the United States. This network, while less profitable, is environmentally superior, yielding upcycled products with a Global Warming Potential 20–35 % lower than their virgin, fossil-fuel counterparts, confirming this as a viable and sustainable alternative.

Chemical upcycling↗
DOE OSTI2024

Evaluating Property Model Accuracy for Cost Optimization of Desalination Technologies

Conference presentation conveying work conducted on property modeling and implications on cost optimization of seawater desalination technology. The authors assess the accuracy of four different property modeling approaches to represent thermodynamic properties of seawater. These properties are used with process flowsheets that include either reverse osmosis or mechanical vapor compression. The accuracy of property estimation is related to deviations in process design and levelized cost.

Sakhai, Savannah↗
DOE OSTI2026

Technical Assistance for Mount Desert Island, Maine

Mount Desert Island, Maine, worked with researchers in the Energy Technology Innovation Partnership Project (ETIPP) to evaluate microgrid siting and sizing to assess how this technology could measurably improve critical service reliability.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Markets, Resources, and Environmental and Energy Justice (MarkeRs-EEJ)

This project will support the development of CO2U technologies and a CO2U industry by assessing the resource and market potential and infrastructure requirements for midterm (-2030) and long-term (-2050) deployment of CO2U technologies, as well as evaluating implications on energy justice factors such as air quality, gross domestic product (GDP), and jobs. Addressing both of these topics enables the project to provide context that can be used across a large portfolio of CO2U technologies so stakeholders can make decisions informed by both economic and societal factors.

BIOMASS FUELS↗
DOE OSTI2025

Solar Panel Anti-Soiling Evaluation (CRADA Final Report)

NREL and Pellucere Technologies, Inc. will cooperate to leverage NREL’s existing testing and data analysis capability to evaluate solar panel anti-soiling coating in both laboratory testing conditions and from actual solar array field data.

14 SOLAR ENERGY↗
DOE OSTI2023

Evaluating energy justice metrics in early-stage science and technology research using the JUST-R metrics framework

Embedding principles of energy justice throughout all aspects of clean energy technology research and development (R&D) can facilitate a more just energy transition; yet gaps remain in our understanding of how to best integrate energy justice from the earliest R&D stages. The Justice Underpinning Science and Technology Research (JUST-R) metrics framework has been developed to enable early-stage energy researchers to assess and address justice considerations associated with their research, but the impacts of the framework, and others like it, have yet to be evaluated. This study seeks to evaluate the JUST-R metrics framework in terms of its effectiveness and appeal to researchers engaged in early-stage technical R&D using qualitative analyses of documents and workshop transcripts. We find that the metrics framework helps researchers identify problems and potential solutions surrounding the energy justice implications of their work and spurs a change in perspective for researchers, but, simultaneously, there is no evidence of solution follow-through within the evaluation timeframe. Greater institutional support, specialization to research areas, knowledge of energy justice fundamentals, and earlier incorporation of energy justice considerations in research projects arise as factors needed to aid continued use of the framework and pursuit of identified solutions. This evaluation protocol and these findings can serve as a guide for improving other frameworks with similar goals of encouraging sociotechnical engagement in early-stage energy R&D.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

The BUTTON-30 detector at Boulby

The BUTTON-30 detector is a 30-tonne technology demonstrator designed to evaluate the potential of hybrid event detection, simultaneously exploiting both Cherenkov and scintillation light to detect particles produced in neutrino interactions. The detector is installed at a depth of 1.1 km in the Boulby Underground Laboratory allowing to test the performance of this new technology underground in a low background environment. This paper describes the design and construction of the experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗