Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Solving the Grad–Shafranov equation using spectral elements for tokamak equilibrium with toroidal rotation

The Grad–Shafranov equation is solved using spectral elements for tokamak equilibrium with toroidal rotation. The Grad–Shafranov solver builds upon and extends the NIMEQ code (Howell and Sovinec, 2014) previously developed for static tokamak equilibria. Both geometric and algebraic convergence are achieved as the polynomial degree of the spectral-element basis increases. A new analytical solution to the Grad–Shafranov equation is obtained for Solov’ev equilibrium in presence of rigid toroidal rotation, in addition to a previously obtained analytical solution for a different set of equilibrium and rotation profiles. The numerical solutions from the extended NIMEQ are benchmarked with the analytical solutions, with good agreements. Besides, the extended NIMEQ code is benchmarked with the FLOW code (Guazzotto et al., 2004). The modification of pressure profile induced by toroidal flow is investigated. The relative change of pressure profile is found significant around the edge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A BOUT++ extension for full annular tokamak edge MHD and turbulence simulations

For tokamak edge plasma simulation, a plasma simulation framework BOUT++ employs a dual coordinate system to simulate moderate-n and high-n plasma instability with reasonable computational cost, where n is the toroidal mode number. This coordinate system however limits the computational domain to the toroidal wedge (full torus divided into N parts in the toroidal direction) for computational efficiency and the use of flute-ordering approximation in the field solver calculating the flow potential from the vorticity which may not be valid for low-n modes. Improving numerical treatment of low-n modes is however indispensable to address simulations of low-n current-driven edge localized mode (ELM), ELM control by resonant magnetic perturbations (RMPs), edge turbulence with RMPs and so on. In this work, BOUT++ is extended to simulate the interplay between $n=0$, low-n and high-n plasma components in a full annular tokamak edge domain through hybrid modeling of the flow potential and the vorticity. Low-n modes of flow potential are calculated in an orthogonal flux surface coordinate and high-n modes in the dual coordinate system separately in Fourier space. Finally, the proposed scheme can capture an interplay between $n=1$ global modes and high-n turbulence during pedestal collapse in a full annular torus domain with a circular cross section.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STORM: Scrape-off layer turbulence in tokamak fusion reactors

The scrape-off layer of a tokamak fusion reactor carries the plasma exhaust from the hot core plasma to the material surfaces of the reactor vessel. The heat loads imposed by the exhaust are a critical limit on the performance of fusion power plants. Turbulent transport of the plasma regulates the width of the scrape-off layer plasma and must be modelled to understand the intensity of these heat loads. STORM is a plasma turbulence code capable of simulating three dimensional turbulence across the full scrape-off layer of a tokamak fusion reactor, using a drift reduced, collisional fluid model. STORM uses mostly finite difference schemes, with a staggered grid in the direction parallel to the magnetic field. We describe the model, geometry and initialisation options used by STORM, as well as the numerical methods, which are implemented using the BOUT++ plasma simulation framework. BOUT++ has been enhanced alongside the development of STORM, providing better support for staggered grid methods. We summarise these enhancements, including a detailed explanation of the parallel derivative methods, which underwent a major update for version 4 of BOUT++.

BOUT++↗

The impact of lithium wall coatings on NSTX discharges and the engineering of the Lithium Tokamak eXperiment (LTX)

Recent experiments on the National Spherical Torus eXperiment (NSTX) have shown the benefits of solid lithium coatings on carbon PFC's to diverted plasma performance, in both L- and H-mode confinement regimes. Better particle control, with decreased inductive flux consumption, and increased electron temperature, ion temperature, energy confinement time, and DD neutron rate were observed. Successive increases in lithium coverage resulted in the complete suppression of ELM activity in H-mode discharges. A liquid lithium divertor (LLD), which will employ the porous molybdenum surface developed for the LTX shell, is being installed on NSTX for the 2010 run period, and will provide comparisons between liquid walls in the Lithium Tokamak eXperiment (LTX) and liquid divertor targets in NSTX. LTX, which recently began operations at the Princeton Plasma Physics Laboratory, is the world's first confinement experiment with full liquid metal plasma-facing components (PFCs). All materials and construction techniques in LTX are compatible with liquid lithium. LTX employs an inner, heated, stainless steel-faced liner or shell, which will be lithium-coated. In order to ensure that lithium adheres to the shell, it is designed to operate at up to 500–600 °C to promote wetting of the stainless by the lithium, providing the first hot wall in a tokamak to operate at reactor-relevant temperatures. The engineering of LTX will be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experiments with Liquid Metal Walls: Status of the Lithium Tokamak Experiment

Liquid metal walls have been proposed to address the first wall challenge for fusion reactors. The Lithium Tokamak Experiment (LTX) at the Princeton Plasma Physics Laboratory (PPPL) is the first magnetic confinement device to have liquid metal plasma-facing components (PFC's) that encloses virtually the entire plasma. In the Current Drive Experiment-Upgrade (CDX-U), a predecessor to LTX at PPPL, the highest improvement in energy confinement ever observed in Ohmically-heated tokamak plasmas was achieved with a toroidal liquid lithium limiter. The LTX extends this liquid lithium PFC by using a conducting conformal shell that almost completely surrounds the plasma. By heating the shell, a lithium coating on the plasma-facing side can be kept liquefied. A consequence of the low-recycling conditions from liquid lithium walls is the need for efficient plasma fueling. For this purpose, a molecular cluster injector is being developed. Future plans include the installation of a neutral beam for core plasma fueling, and also ion temperature measurements using charge-exchange recombination spectroscopy. Low edge recycling is also predicted to reduce temperature gradients that drive drift wave turbulence. Gyrokinetic simulations are in progress to calculate fluctuation levels and transport for LTX plasmas, and new fluctuation diagnostics are under development to test these predictions. __________________________________________________

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of ECH launcher for KSTAR advanced Tokamak operation

For the advanced tokamak operation in Korea Superconducting Tokamak Advanced Research (KSTAR), up to 6 MW of electron cyclotron heating (ECH) is planned. The ECH launcher should be able to operate in steady state and serve as a central/off-axis heating and current drive, q-profile control, and control of the neoclassical tearing mode (NTM) and sawtooth. The water cooled launchers have been upgraded to include continuous operation with precise, high-speed real-time control of the beams by integration with the plasma control system (PCS) for supporting the experiments, in particular for suppressing NTM. Here, the launcher was successfully operated for 78 s with about 650 kW EC power, where the temperature of the coolant, with a flow rate of 9.6 lpm, is saturated and approximately 2 °C. The launcher control system had a maximum control cycle of 5 kHz and a motor latency of about 10 ms, and the poloidal scanning speed of the beam was 20 °/s. Additionally, for the higher localization of power deposition, the curvature and size of the mirrors in the launcher were optimized. This paper presents the ECH launcher design and its control system with the operation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Full f gyrokinetic method for particle simulation of tokamak transport

A gyrokinetic particle-in-cell approach with direct implicit construction of the coefficient matrix of the Poisson equation from ion polarization and electron parallel nonlinearity is described and applied in global electrostatic toroidal plasma transport simulations. The method is applicable for calculation of the evolution of particle distribution function f including as special cases strong plasma pressure profile evolution by transport and formation of neoclassical flows. This is made feasible by full f formulation and by recording the charge density changes due to the ion polarization drift and electron acceleration along the local magnetic field while particles are advanced. The code has been validated against the linear predictions of the unstable ion temperature gradient mode growth rates and frequencies. Convergence and saturation in both turbulent and neoclassical limit of the ion heat conductivity is obtained with numerical noise well suppressed by a sufficiently large number of simulation particles. A first global full f validation of the neoclassical radial electric field in the presence of turbulence for a heated collisional tokamak plasma is obtained. At high Mach number (M{sub p}{approx}1) of the poloidal flow, the radial electric field is significantly enhanced over the standard neoclassical prediction. The neoclassical radial electric field together with the related GAM oscillations is found to regulate the turbulent heat and particle diffusion levels particularly strongly in a large aspect ratio tokamak at low plasma current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The GBS code for tokamak scrape-off layer simulations

We describe a new version of GBS, a 3D global, flux-driven plasma turbulence code to simulate the turbulent dynamics in the tokamak scrape-off layer (SOL), superseding the code presented by Ricci et al. (2012) [14]. The present work is driven by the objective of studying SOL turbulent dynamics in medium size tokamaks and beyond with a high-fidelity physics model. We emphasize an intertwining framework of improved physics models and the computational improvements that allow them. The model extensions include neutral atom physics, finite ion temperature, the addition of a closed field line region, and a non-Boussinesq treatment of the polarization drift. GBS has been completely refactored with the introduction of a 3-D Cartesian communicator and a scalable parallel multigrid solver. We report dramatically enhanced parallel scalability, with the possibility of treating electromagnetic fluctuations very efficiently. The method of manufactured solutions as a verification process has been carried out for this new code version, demonstrating the correct implementation of the physical model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design and optimization of Artificial Neural Networks for the modelling of superconducting magnets operation in tokamak fusion reactors

In superconducting tokamaks, the cryoplant provides the helium needed to cool different clients, among which by far the most important one is the superconducting magnet system. The evaluation of the transient heat load from the magnets to the cryoplant is fundamental for the design of the latter and the assessment of suitable strategies to smooth the heat load pulses, induced by the intrinsically pulsed plasma scenarios characteristic of today's tokamaks, is crucial for both suitable sizing and stable operation of the cryoplant. For that evaluation, accurate but expensive system-level models, as implemented in e.g. the validated state-of-the-art 4C code, were developed in the past, including both the magnets and the respective external cryogenic cooling circuits. Here we show how these models can be successfully substituted with cheaper ones, where the magnets are described by suitably trained Artificial Neural Networks (ANNs) for the evaluation of the heat load to the cryoplant. First, two simplified thermal-hydraulic models for an ITER Toroidal Field (TF) magnet and for the ITER Central Solenoid (CS) are developed, based on ANNs, and a detailed analysis of the chosen networks' topology and parameters is presented and discussed. The ANNs are then inserted into the 4C model of the ITER TF and CS cooling circuits, which also includes active controls to achieve a smoothing of the variation of the heat load to the cryoplant. The training of the ANNs is achieved using the results of full 4C simulations (including detailed models of the magnets) for conventional sigmoid-like waveforms of the drivers and the predictive capabilities of the ANN-based models in the case of actual ITER operating scenarios are demonstrated by comparison with the results of full 4C runs, both with and without active smoothing, in terms of both accuracy and computational time. Exploiting the low computational effort requested by the ANN-based models, a demonstrative optimization study has been finally carried out, with the aim of choosing among different smoothing strategies for the standard ITER plasma operation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effect of the inductive electric field on ion poloidal rotation in all collisionality regimes for the primary ions in tokamaks

The expression for the poloidal rotation velocity of the primary ions that is caused by the parallel inductive electric field in tokamaks and valid in all collisionality regimes is derived via the Hirshman-Sigmar moment approach. Also the expression of the collisional impurity ions poloidal rotation velocity that is caused by the parallel inductive electric field in tokamaks is derived. The poloidal rotation velocities of the primary ions and the impurity ions are sensitive to the primary ion collisionality parameter and the impurity strength parameter. The poloidal rotation velocities of the primary ions and the impurity ions decrease with the primary ion collisionality parameter and decrease with the impurity strength parameter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tokamak plasma equilibria with a zero total toroidal current

Several tokamak experiments have reported the existence of plasma equilibria with a zero total toroidal current in the AC operations of tokamaks. By taking a toroidal current profile model as a function of a quadratic polynomial of {psi}, a variety of equilibrium configurations with a zero total toroidal current have been found by solving the Grad-Shafranov equation numerically in the cylindrical coordinate system for the arbitrary cross section and finite aspect ratio. Results from different parametrizations of the current density (pressure) profile are discussed. Using input parameters consistent with experiments, some of the modeling results have been found to be in good agreement with experiment observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A quantitative account of electron energy transport in a National Spherical Tokamak Experiment plasma

The first successful quantitative account of the electron thermal conductivity {chi}{sub e} in a tokamak experiment due to imperfect magnetic surfaces is presented. The unstable spectrum of microtearing instabilities is calculated with the GS2 code for a well-behaved H-mode plasma in the National Spherical Tokamak Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)], with 6 MW deuterium neutral beam heating at I{sub p}=0.75 MA, B{sub t}=0.5 T. The application of existing nonlinear theory shows that the unstable modes can produce overlapping magnetic islands leading to global stochastic magnetic fields. The calculated {chi}{sub e} based on the present theory is in reasonable agreement with the values from transport analysis of the experimental data over the entire region (0.4<r/a<0.75) where the electron temperature gradient is strong enough to make microtearing the most unstable mode. There is no adjustable parameter in this comparison. This instability can be avoided by reversed magnetic shear or by heating the electrons to lower the electron-ion collision frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SPECE: a code for Electron Cyclotron Emission in tokamaks

The code SPECE has been developed for the analysis of electron cyclotron emission (ECE) in a general tokamak equilibrium. The code solves the radiation transport equation along the ray trajectories in a tokamak plasma, in which magnetic equilibrium and plasma profiles are given either analytically or numerically, for a Maxwellian plasma or a non thermal plasma characterized by a distribution function that is the sum of drifting Maxwellian distributions. Ray trajectories are computed making use of the cold dispersion relation, while the absorption and emission coefficients are obtained solving the relevant fully relativistic dispersion relation valid at high electron temperature. The actual antenna pattern is simulated by means of a multi-rays calculation, and the spatial resolution of the ECE measurements is computed by means of an algorithm that takes properly into account the emission along each ray of the beam. Wall effects are introduced in the code by means of a heuristic model. Results of ECE simulations in a standard ITER scenario are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Control of a Tokamak Plasma

The plasma in a tokamak is magnetically confined through electromagnetic fields generated by a set of poloidal field coils, with feedforward nominal voltages or currents based on an approximate plasma model. Therefore, feedback control is necessary. A good magnetic control is essential for achieving good performance in present devices and expected to be of paramount importance in future tokamaks with a burning plasma due to the more stringent requirements in terms of plasma-wall clearance, stability margins, limited number of tolerable disruptions and so on. Magnetic fields are able to control plasma current, position and shape as well as three dimensional instabilities on the resistive time scales (resistive wall modes). They also have an influence on the control of the plasma current density profile. This paper focuses on the axisymmetric control of plasma current, position and shape, illustrating modelling assumptions and techniques, controller design procedures, assessment of controller performance and magnetic diagnostic requirements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

REAL-TIME EQUILIBRIUM RECONSTRUCTION IN A TOKAMAK

This paper deals with the numerical reconstruction of the plasma current density in a Tokamak and of its equilibrium. The problem consists in the identification of a non-linear source in the 2D Grad-Shafranov equation, which governs the axisymmetric equilibrium of a plasma in a Tokamak. The experimental measurements that enable this identification are the magnetics on the vacuum vessel, but also polarimetric and interferometric measures on several chords, as well as motional Stark effect or pressure measurements. The reconstruction can be obtained in real-time using a finite element method, a non-linear fixed-point algorithm and a least-square optimization procedure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostics of Fast Electrons within Castor Tokamak by Means of a Modified Cherenkov-Type Probe

The paper reports on experimental studies performed within the CASTOR tokamak, which was operated at IPP in Prague, Czech Republic, during the last experimental campaign carried out in autumn 2006. The main aim was to implement a new diagnostic technique for measurements of energetic (>80 keV) electrons within the tokamak edge plasma region. The technique was based on the use of a Cherenkov-type probe similar to the first prototype detector, which was tested during the previous experiments with the CASTOR device. In particular, the distributions of fast electrons in a standard scenario at different values of plasma current I{sub p}, and toroidal magnetic field B{sub T} are determined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent Results from the STOR-M Tokamak

This paper reports on two recent experiments carried out on the STOR-M tokamak. The first experiment studied the nature of MHD activities based on singular value decomposition algorithm during the improved confinement phase induced by compact torus injection. The typical MHD modes with mode numbers m = 2, 3, and 4 are suppressed during the improved confinement phase. Shortly before the termination of the improved confinement phase, MHD activities reemerge, starting with a gong-mode-like burst followed by oscillations of a rotating m = 2. The second experiment was successful current start-up with a simulated spherical tokamak configuration where the inner Ohmic heating coils surrounding the iron core are deactivated in STOR-M. Current start-up was also achieved with all the vertical equilibrium field coils deactivated. In the latter case, the vertical equilibrium field was provided solely by the image vertical field produced by the magnetization current in the iron core and compensated for by the current through the feedback control vertical field windings. The observed waveforms agree well with numerical simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and Preliminary Results of a Feedback Circuit for Plasma Displacement Control in IR-T1 Tokamak

Since displacement is very important for plasma position control, in IR-T1 tokamak a combination of two cosine coils and two saddle sine coils is used for horizontal displacement measurement. According to the multiple moment theory, the output of these coils linearly depends to radial displacement of plasma column. A new circuit for adding these signals to feedback system designed and unwanted effects of other fields in final output compensated. After compensation and calibration of the system, the output of horizontal displacement circuits applied to feedback control system. By considers the required auxiliary vertical field, a proportional amplifier and driver circuit are constructed to drive power transistors these power transistors switch the feedback bank capacitors. In the experiment, a good linear proportionality between displacement and output observed by applying an appropriate feedback field, the linger confinement time in IR-T1 tokamak obtained, applying this system to discharge increased the plasma duration and realizes repetitive discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗