Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THORIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Uranium and thorium in achondrites.

The abundances of U and Th in 19 achondrites and two pallasite olivines have been measured by radiochemical neutron activation analysis. Brecciated eucrites are enriched relative to chondrites in both elements by factors between 10 and 20, perhaps as a result of a magmatic differentiation process. Two unbrecciated eucrites are far less enriched, possibly due to their origin as igneous cumulates. The diogenites Johnstown and Shalka contain approximately chondritic levels of U and Th, but Ellemeet is 10 times lower. The abundances in three howardites are in good agreement with those expected from major element data for a mixing model with eucrite and diogenite end members. The high O-18 basaltic achondrites Nakhla, Shergotty and Angra dos Reis have a range of U and Th abundances similar to the brecciated eucrites and howardites, but have systematically higher Th/U ratios.

Morgan, J. W.↗

Thorium-uranium fission radiography

Results are described for studies designed to develop routine methods for in-situ measurement of the abundance of Th and U on a microscale in heterogeneous samples, especially rocks, using the secondary high-energy neutron flux developed when the 650 MeV proton beam of an accelerator is stopped in a 42 x 42 cm diam Cu cylinder. Irradiations were performed at three different locations in a rabbit tube in the beam stop area, and thick metal foils of Bi, Th, and natural U as well as polished silicate glasses of known U and Th contents were used as targets and were placed in contact with mica which served as a fission track detector. In many cases both bare and Cd-covered detectors were exposed. The exposed mica samples were etched in 48% HF and the fission tracks counted by conventional transmitted light microscopy. Relative fission cross sections are examined, along with absolute Th track production rates, interaction tracks, and a comparison of measured and calculated fission rates. The practicality of fast neutron radiography revealed by experiments to data is discussed primarily for Th/U measurements, and mixtures of other fissionable nuclei are briefly considered.

Haines, E. L.↗

Thorium and uranium variations in Apollo 17 basalts, and K-U systematics

It is found that Apollo 11 low-K and in particular Apollo 17 mare basalts show a wide range of Th/U ratios unlike other rocks; such variations cannot be explained by near surface crystal fractionation. A two-stage fractional crystallization-partial melting model involving a clinopyroxene cumulate as the major phase can explain the variations in Th/U ratios. Due to the Sm-Nd systematics constraint, several source cumulates are invoked to explain the observed Th/U continuum.

Laul, J. C.↗

Thorium concentrations in the lunar surface. I - Regional values and crustal content

The reported investigation is based on data which have been obtained with the aid of a gamma-ray spectrometer which had been installed on the Apollo 15 and 16 spacecraft to map the composition of the overflown lunar regolith to a maximum depth of about 1 m. Two additional techniques for the analysis of orbital gamma-ray data have been developed. These techniques have provided basic confirmation for the Th results reported previously and one of them, the energy band method, has yielded results for Th with a sensitivity greater than previous analyses, particularly at low concentrations. Significant variations of radioactivity exist in highland areas. The lowest concentrations of radioactivity mapped by Apollo are found near the western limb, contrasting with concentrations in the eastern limb which run roughly a factor of two higher. An inverse relation has been found between Th concentration and crustal thickness. It is suggested that Th, once uniformly distributed, has been extracted from a zone of constant depth over much of the moon, and concentrated in crustal blocks of varying thickness.

Metzger, A. E.↗

Thorium concentrations in the lunar surface. III - Deconvolution of the Apenninus region

A technique of deconvoluting orbital-gamma ray data which improves spatial resolution and contrast has been applied to Th concentrations in the Apenninus region of the moon. The highest concentration seen from orbit has been found along the northern edge of the data track at Archimedes, requiring a component more highly fractionated in KREEP than the Apollo 15 medium-K Fra Mauro basalt. The results show generally diminishing Th levels extending outward from the Imbrium Basin, and impact penetration of basalt flows in Mare Imbrium to eject sub-mare Th-rich material. The results reinforce the hypothesis that the highlands which border and underlie the western maria contain a pre-mare layer of volcanically-derived KREEP material.

Metzger, A. E.↗

Thorium concentrations in the lunar surface. IV - Deconvolution of the Mare Imbrium, Aristarchus, and adjacent regions

Several fields of orbital gamma ray spectroscopy data have been deconvolved in order to model the distribution of Th over the Mare Imbrium and northern Oceanus Procellarum portions of the Apollo 15 lunar ground track, which in combination with a prior study of the Apenninus region covers a continuous swath from 10 deg E to 60 deg W in the northwest quadrant. The crater of the Aristarchus region dominates the Th distribution, with a concentration of 20 ppm, and substantial enhancements are also found in the mare regions around Brayley and at the ejecta blankets of Timocharis and Lambert. The existence of enhanced Th concentrations in mare basalt regions suggests that reservoirs of some late stage mare basalts incorporated KREEP-rich material during formation or transit.

Etchegaray-Ramirez, M. I.↗

Precise timing of the last interglacial period from mass spectrometric determination of thorium-230 in corals

The development of mass spectrometric techniques for determination of Th-230 abundance has made it possible to reduce analytical errors in (U-238)-(U-234)-(Th-230) dating of corals even with very small samples. Samples of 6 x 10 to the 8th atoms of Th-230 can be measured to an accuracy of + or - 3 percent (2sigma), and 3 x 10 to the 10th atoms of Th-230 can be measured to an accuracy of + or - 0.2 percent. The time range over which useful age data on corals can be obtained now ranges from about 50 to about 500,000 years. For young corals, this approach may be preferable to C-14 dating. The precision with which the age of a coral can now be determined should make it possible to critically test the Milankovitch hypothesis concerning Pleistocene climate fluctuations. Analyses of a number of corals that grew during the last interglacial period yield ages of 122,000 to 130,000 years. The ages coincide with, or slightly post-date, the summer solar insolation high at 65 deg N latitude which occurred 128,000 years ago. This supports the idea that changes in Pleistocene climate can be the result of variations in the distribution of solar insolation caused by changes in the geometry of the earth's orbit and rotation axis.

Chen, J. H.↗

Dating earthquakes with high-precision thorium-230 ages of very young corals

Three corals from Vanuatu Islands, whose ages were known from counting annual growth bands, were analyzed by Th-230 age analysis to asses the accuracy of the Th-230 method. The comparison of Th-230 ages with the growth-band ages showed that the Th-230 ages were accurate within an error of + or - 3-5 y. Th-230 dates were then determined for two adjacent emerged heads from Santo Island; the dates were the same, indicating that the heads died at the same time, and consistent with the theory that they were killed by coseismic emergence around 1865 AD. The difference between this data and the data of the only major historically documented earthquake that caused an uplift (1973) suggests a seismic recurrence interval of 108 + or - 4 y for Santo. It is suggested that this approach may be extended back in time and to other localities.

Edwards, R. Lawrence↗

Lateral and Vertical Heterogeneity of Thorium in the Procellarum KREEP Terrane: As Reflected in the Ejecta Deposits of Post-Imbrium Craters

The Procellarum KREEP Terrane displays the highest concentrations of Th on the Moon. However, locations of elevated Th in this region appear to be random. As observed in the 5 deg per pixel equal-area Th data, and made more evident in the preliminary 2 deg data, Th is enhanced around the craters Aristillus, Aristarchus, Kepler, Mairan, the Apennine Bench formation, and the Fra Mauro region, while noticeably and unexpectedly lower in other locations (e.g., Archimedes, Copernicus, Eratosthenes, and Plato). We have examined the composition of the materials present in these regions with the goal of understanding the patchy nature to the distribution of Th and ultimately to decipher the geologic processes that have concentrated the Th. At present time, the published resolution of the Lunar Prospector Th gamma-ray data is low (5 deg per pixel), but this will soon be superceded by significantly higher-resolution data (2 deg per pixel). Even at this improved resolution, however, it is difficult to resolve the units that are the major source of Th. In an attempt to circumvent this problem, we employ the higher-resolution Clementine multispectral data for those regions mentioned above. We use the UV-VIS-derived compositional information and the spectral properties of craters, and their ejecta as drill holes through the mare-basalt surface to investigate the thickness and composition of underlying material. With this information we attempt to piece together the stratigraphy and geologic history of the Imbrium-Procellanim region. We processed the five-band multispectral data from the Clementine Mission (415, 750,900,950, and 1000nm) using ISIS software and calibration parameters developed by the USGS, Flagstaff, Arizona. Final image mosaics are in equal-area sinusoidal projection, and have a resolution of 250 m/pixel. Using the method of we produced maps of FeO and Ti02 composition. Here we examine the Th, FeO, and Ti02 composition and spectral properties of the craters discussed above and their ejecta, with the goal of describing the materials they excavate. One interpretation for the origin of the high-Th material is that subsurface KREEPy materials have been excavated by impact craters. The material excavated may be either volcanic KREEP (e,g., Apennine Bench Formation), KREEPy impact-melt breccia formed by the Imbrium impact (e.g., Fra Mauro Formation), or other KREEP-rich crustal material. Determining which type of material is responsible for the elevated Th and its extent is important to understanding the premare and possibly the prebasin stratigraphy of the Imbrium-Procellarum Region. Merging the 5 deg. Th data with the shaded relief map, we observe that the highest Th concentrations are not related to pre-Imbrium upper crustal materials. The Apennines, Alpes, and Caucasus Mountains represent the pre-Imbrian highlands material and do not express concentrations of Th, FeO, and TiO2 as high as the most Th-fich materials exposed within the Procellarum KREEP Terrane. We observe that, in general, these massifs contain 10-14 wt% FeO and 4-7 ppm Th. Determining whether the Th signal is from KREEP basalts or KREEPy impact-melt breccias cannot be done with the Clementine data because the two rock types are compositionally and mineralogically too similar (e.g., the Th-rich, mafic impact-melt breccias in the Apollo sample collection are dominated by a KREEP-basalt like component. Mapping-the distribution and sizes of craters and whether they display elevated Th concentrations or not, should reveal the depth and thickness of the KREEP-rich materials, and whether they are ubiquitous (i.e., impact-melt breccia) or more randomly distributed; this might be taken as an indicator of localized KREEP-basalt flows. Within the southeastern region of the Imbrium basin, there are two Th hot spots. The first is associated with the crater Aristillus, and the latter with the Apennine Bench Formation. Adjacent to these two hot spots are craters with a lower Th signature: Archimedes and Autolycus. We observe in the ejecta of Aristillus, a region of significantly lower FeO (10-14 wt%) relative to the surrounding mare basalt. The crater Autolycus, 50 km to the south, did not excavate similar low-FeO material. We suggest that the lower-FeO material in the ejecta of Aristillus corresponds to Th-rich material; the FeO content observed in Aristillus ejecta is comparable to that of KREEP basalt or mafic impact melt breccia (10-12 wt% FeO). We determine that this low FeO, Th-rich material is volcanic KREEP, as opposed to Imbrium impact melt, on the basis that the low-Fe material is exposed more prominently in ejecta in the northern portion of Aristillus. Our assumption is that if the layer underlying Aristillus was continuous, a more widespread and uniform low-Fe signature wouldbe observed in the ejecta deposit. Archimedes, 110 km southwest of Aristillus, impacted the northern portion of the Apennine Bench prior to the eruption of KREEP basalt. Archimedes rim material is not as enriched in Th as the Apennine Bench, and there are differences between the two in FeO concentration and in their continuum slope. Archimedes exhibits a much steeperor "redder" continuum slope than the Apennine Bench. This steepslope suggests the presence of glassy material. The glassy material is concentrated around an unnamed crater on the southern rim of Archimedes (4.5W, 28.2N) and along the northern rim of Archimedes. We suggest two possibilities, or a combination of the two, to explain the low-Th signal from Archimedes: (1) The Apennine Bench prior to KREEP basalt eruption was lower in Th (4-7 ppm, e.g., similar to the Apennine massifs) and KREEP basalts are absent in the rim of Archimedes; or (2) the glassy (possibly pyroclastic) material layering the rim of the Archimedes, dilutes any high-Th material present with low-Th material. (Additional information is contained in the original)

Gillis, J. J.↗

Thorium Enrichment within the Procellarum KREEP Terrane: The Record in Surface Deposits and Significance for Thermal Evolution

The nearside-farside structural and compositional asymmetry of the Moon was recognized during the early days of Apollo and the suggestion was made that the migration of mantle melts to the nearside would have been favored by early Earth-Moon orbital dynamics and nonuniform planetesimal bombardment. Recent global geochemical mapping by Lunar Prospector has provided additional data, particularly in the Th distribution, that strongly supports the notion of global, preferential melt migration, which led in part to the development of the Procellarum KREEP Terrane (PKT) [2-5]. The surface distribution of Th was then reshaped by basin-forming impacts into the PKT, especially the Imbrium impact, which was the last and largest to strike in that region. The Imbrium event probably excavated material from a partially molten zone deep in the crust and delivered Th-rich ejecta Moon-wide. A fundamentally important but poorly understood aspect of the global Th distribution is the concentration of Th in the subsurface rocks of the PKT crustal section. For example, depending on what assumptions are made, the PKT crustal section, which is about 12% of the crust and only about 1.2% of the whole Moon, may contain as much as 40% of the Moon's entire Th budget. Such a distribution of Th and related heat-producing elements would have had a profound effect on melting, mixing, and the thermal evolution of the PKT and the underlying mantle. In this abstract, we examine the compositions of terra formations within the PKT and relate them to some of the Th-bearing rock types known from the Apollo samples. It appears that the existence of the PKT may be a unifying concept for a number of petrologic and geochemical observations. From the initial Lunar Prospector gamma-ray spectrometer data(-about 5 deg. resolution) and from the preliminary low-orbit data, there appears to be a number of relatively hotter "spots" within the PKT in terms of Th concentration. Some of the hotter spots correspond to intermediate-sized craters that penetrated volcanic flows and excavated Th-rich, submare material, such as Aristarchus, Aristillus, and Kepler. Other spots, however, correspond to surficial formations that constitute mainly rough topography associated with Imbrium ejecta or circum-Imbrium ring mountains and do not necessarily imply the presence of exposed KREEP basalts. The Fra Mauro Formation south of Copernicus toward the Apollo 14 site and regions of the Alpes Formation southwest of Copernicus in the vicinity of Reinhold lie within the most prominent hotspot; here them concentration is consistent with that found in the Apollo 14 soils (about 12-13 ppm) when the proportions of Fra Mauro Formation and mare basalt are considered. The area between Copernicus and Kepler and northwest of Copernicus in terra extending to the Carpathians is similarly enriched in Th. The Apennines from Eratosthenes toward the Apollo 15 site contain elevated Th concentrations, as does the northwestern quadrant of circum-Imbrium terra, especially between (but not including) La Condamine and Plato, and in the region northwest of the Jura mountains extending southward past Mairan to the Gruithuisen-Domes region. Within the main topographic rim of Imbrium, the Apennine Bench formation south of Archimedes appears to have relatively elevated Th concentration. Comparing the map of Th distribution to a digital-elevation map derived from Clementine altimetry, it appears that most of the areas richest in Th occur where the surface is elevated relative to the majority of PKT volcanic plains. Not all rough topography within the PKT has such elevated Th, however. Based on an analysis of the 5 deg. data, and using the calibration of, the mean Th concentrations for mainly volcanic-resurfaced terrain and rugged terrain are similar (about 5.5 ppm). This occurs in part because craters that penetrated mare basalt excavated Th-rich material. Even so, there appear to be extensive areas of volcanic resurfacing that have no obvious extrinsic source of Th-rich material, suggesting that the basalts, themselves, may contain as much as 5-6 ppm Th. High-FeO concentrations (18 to >20 wt%) indicate that these are not KREEP basalts but mare basalts. If so, this is surprising because most of the Apollo-sampled mare basalts have very low-Th (typically <2 ppm). A variety of Th-rich materials occur in the sample collection, particularly in the samples from the Apollo 12,14, and 15 sites. The most abundant Th-rich rock types are the mafic impact-melt breccias, which although found at all sites, are most abundant at Apollo 14, where they dominate the rock samples and make up some 40% of the rock particles in the soil. These have Th concentrations ranging up to about 30 ppm and averaging about 18 ppm. The Apollo 14 soils contain about 13 ppm Th, reflecting the high abundance of this melt-breccia component. At the nearby Apollo 12 site, the rocks consist mainly of mare basalts, and these have low-Th concentrations, mostly <1 ppm. Among the nonmare rocks, however, a few such as complex breccia 12013 contain a variety of evolved lithologies and represent potential sources of Th-rich components ranging from 17 to 50 ppm. A single fragment of KREEP basalt from the Apollo 12 soil contains about 50 ppm Th. Despite the identification of highly Th-enriched lithologic components at the Apollo 12 site, the soils there vary linearly in composition so as to extrapolate to a moderate Th KREEP-basalt component or a composition like that of the Fra Mauro formation as reflected by Apollo 14 soil (14 ppm Th at 10 wt% FeO). The nearby Lansberg Crater (39-km diameter) is a likely candidate to have delivered submare material such as buried Fra Mauro or Alpes material to the Apollo 12 site. Additional information contained in the original.

Jolliff, B. L.↗

Revisiting the Interpretation of Thorium Abundances at Hansteen Alpha

Hansteen Alpha is one of the few remaining locations on the Moon thought to be formed by highlands volcanism. Hansteen Alpha is a triangular shaped feature located in the southern portion of Oceanus Procellarum (12 degrees W, 50 degrees S) and its size is approximately 25 km on each side. As described by Hawke et al., there is clear evidence that: 1) Hansteen Alpha was emplaced by extrusive volcanic processes; and 2) it was formed by a viscous lava that should be enriched in Th. However, in the study of Hawke et al. using available Lunar Prospector (LP) Th data, it was concluded that the Hansteen Alpha region was not greatly enriched in Th as would be expected for a highly evolved, viscous lava. It was further concluded based on other compositional data that the magma that formed Hansteen Alpha did not correspond to any known rock type. Here we revisit the interpretation of Th abundances at Hansteen Alpha for a couple of reasons. First, the size of Hansteen Alpha is smaller than the spatial resolution of the LP Gamma-ray Spectrometer (LP-GRS) from which the Th abundances were derived. Therefore, the LP-GRS pixels covering Hansteen Alpha may not truly represent the Th abundance of the Hansteen Alpha feature. Second, recent work has led to a much greater understanding of the Th spatial distribution for small-area features on the lunar surface. In particular, using forward modeling techniques, we have developed the ability to obtain information about Th abundances for features that are at or smaller than the FWHM spatial resolution (approximately [80 square kilometers]) of the LP-GRS data.

Lawrence, D. J.↗

Thorium Anomalies in the NW Quadrant of the South Pole-Aitken Basin

The relatively high concentrations of Th near the Imbrium antipode in the South Pole-Aitken (SPA) basin might represent Imbrium ejecta, a consequence of convergence of Th-rich material ejected by the Imbrium impact that occurred in the Th-rich Procellarum KREEP Terrane. Here, we present landing positions for 7500 fragments ejected from Imbrium obtained by three-body (Earth-Moon-fragment) numerical integration for uniformly selected azimuthal launch positions, ejection angles of 45 deg, and velocities from 0.95 to 0.99 lunar escape. This provides an estimate of the density of infalling ejecta fragments to be expected in the vicinity of the Imbrium antipode. Similar calculations for 35 and 50 deg leave large empty regions surrounding the antipode.

Haskin, Larry A.↗

Gas Turbine Energy Conversion Systems for Nuclear Power Plants Applicable to LiFTR Liquid Fluoride Thorium Reactor Technology

This panel plans to cover thermal energy and electric power production issues facing our nation and the world over the next decades, with relevant technologies ranging from near term to mid-and far term.Although the main focus will be on ground based plants to provide baseload electric power, energy conversion systems (ECS) for space are also included, with solar- or nuclear energy sources for output power levels ranging tens of Watts to kilo-Watts for unmanned spacecraft, and eventual mega-Watts for lunar outposts and planetary surface colonies. Implications of these technologies on future terrestrial energy systems, combined with advanced fracking, are touched upon.Thorium based reactors, and nuclear fusion along with suitable gas turbine energy conversion systems (ECS) will also be considered by the panelists. The characteristics of the above mentioned ECS will be described, both in terms of their overall energy utilization effectiveness and also with regard to climactic effects due to exhaust emissions.

Energy Conversion↗

Production of thorium-229 using helium nuclei

A method for producing .sup.229Th includes the steps of providing .sup.226Ra as a target material, and bombarding the target material with alpha particles, helium-3, or neutrons to form .sup.229Th. When neutrons are used, the neutrons preferably include an epithermal neutron flux of at least 1.times.10.sup.13 n s.sup.-1cm.sup.-2. .sup.228Ra can also be bombarded with thermal and/or energetic neutrons to result in a neutron capture reaction to form .sup.229Th. Using .sup.230Th as a target material, .sup.229Th can be formed using neutron, gamma ray, proton or deuteron bombardment.

Mirzadeh, Saed↗