Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Synthesizers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Carbon Anode Material from Biomass Pyrolysis Oil

Lithium-ion batteries (LIB) are an important component of electric vehicles and sodium-ion batteries (SIB) are an attractive alternative for grid electric storage. We are investigating a novel approach to synthesizing the carbon anode materials for these batteries from biomass pyrolysis oil as part of conversion processes to produce biofuels. Graphite is used as anode material in LIB and is exclusively produced from petroleum residue or mined mineral carbon. We have synthesized drop-in graphite by coking the heavy residual oil from the distillation of catalytic fast pyrolysis oil and by catalytic graphitizing raw pyrolysis oil. XRD and Raman spectroscopies were used to verify the production of high purity crystalline graphite. Figure 1 shows typical XRD spectra of the bio-graphite compared to commercial material as well as the charge/discharge cycle. Graphite particle sizes and morphologies were adjusted to improve performance using jet milling and carbon coating. The bio-graphite delivered a high capacity (335 mAh/g) when tested in a graphite half-cell. Full cell coin cell experiments were also conducted to verify the observations from half-cell testing. The high value of graphite (>$9/kg) can positively impact the economics of biofuels production and can be an important part of a future circular carbon economy. We have also investigated synthesizing hard carbon from pyrolysis oil for use as anode material in SIB. These batteries are not commercially mature but have great promise in grid storage and use earth abundant elements. We have demonstrated that pyrolysis oil can be used to synthesize hard carbon, which was subsequently be used in SIB experiments. This material achieved a sodium-ion capacity of 250 mAh/g and a first cycle efficiency of 78%, with opportunities to further optimize this performance from optimizing the composition of the pyrolysis oil to shaping the hard carbon particles. As with graphite, hard carbon is a high value (> $10/kg) material that could facilitate biofuels production.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2020

Two‐Dimensional Superstructures of Silica Cages

Abstract Despite extensive studies on mesoporous silica since the early 1990s, the synthesis of two‐dimensional (2D) silica nanostructures remains challenging. Here, mesoporous silica is synthesized at an interface between two immiscible solvents under conditions leading to the formation of 2D superstructures of silica cages, the thinnest mesoporous silica films synthesized to date. Orientational correlations between cage units increase with increasing layer number controlled via pH, while swelling with oil and mixed surfactants increase micelle size dispersity, leading to complex clathrate type structures in multilayer superstructures. The results suggest that a three‐dimensional (3D) crystallographic registry within cage‐like superstructures emerges as a result of the concerted 3D co‐assembly of the organic and inorganic components. Mesoporous 2D superstructures can be fabricated over macroscopic film dimensions and stacked on top of each other. The realization of previously inaccessible mesoporous silica heterostructures with separation or catalytic properties unachievable via conventional bulk syntheses is envisioned.

Aubert, Tangi↗
DOE OSTI2024

Visualizing the Internal Nanocrystallinity of Calcite Due to Nonclassical Crystallization by 3D Coherent X–Ray Diffraction Imaging

The internal crystallinity of calcite is investigated for samples synthesized using two approaches: precipitation from solution and the ammonium carbonate diffusion method. Scanning electron microscopy (SEM) analyses reveal that the calcite products precipitated using both approaches have a well–defined rhombohedron shape, consistent with the euhedral crystal habit of the mineral. The internal structure of these calcite crystals is characterized using Bragg coherent diffraction imaging (BCDI) to determine the 3D electron density and the atomic displacement field. BCDI reconstructions for crystals synthesized using the ammonium carbonate diffusion approach have the expected euhedral shape, with internal strain fields and few internal defects. In contrast, the crystals synthesized by precipitation from solution have very complex external shapes and defective internal structures, presenting null electron density regions and pronounced displacement field distributions. These heterogeneities are interpreted as multiple crystalline domains, created by a nonclassical crystallization mechanism, where smaller nanoparticles coalescence into the final euhedral particles. The combined use of SEM, X–ray diffraction (XRD), and BCDI allows for structurally differentiating calcite crystals grown with different approaches, opening new opportunities to understand how grain boundaries and internal defects alter calcite reactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rapid and Energy‐Efficient Synthesis of Disordered Rocksalt Cathodes

Abstract Lithium‐rich transition metal oxides with a cation‐disordered rocksalt structure (disordered rocksalt oxides or DRX) are promising candidates for sustainable, next‐generation Li‐ion cathodes due to their high energy densities and compositional flexibility, enabling Co‐ and Ni‐free battery chemistries. However, current methods to synthesize DRX compounds require either high temperature (≈1000 °C) sintering for several hours, or high energy ball milling for several days in an inert atmosphere. Both methods are time‐ and energy‐intensive, limiting the scale up of DRX production. The present study reports the rapid synthesis of various DRX compositions in ambient air via a microwave‐assisted solid‐state technique resulting in reaction times as short as 5 min, which are more than two orders of magnitude faster than current synthesis methods. The DRX compounds synthesized via microwave are phase‐pure and have a similar short‐ and long‐range structure as compared to DRX materials synthesized via a standard solid‐state route, resulting in nearly identical electrochemical performance. In some cases, microwave heating allows for better particle size and morphology control. Overall, the rapid and energy‐efficient microwave technique provides a more sustainable route to produce DRX materials, further incentivizes the development of next‐generation DRX cathodes, and is key to accelerating their optimization via high‐throughput studies.

25 ENERGY STORAGE↗
DOE OSTI2025

Screening and Development of Sacrificial Cathode Additives for Lithium‐Ion Batteries

Abstract This work presents a computational screening approach to identify Li‐rich transition‐metal oxide sacrificial cathode additives and provides experimental validation of antifluorite‐structured Li 6 MnO 4 as a potential candidate. Initial attempts to synthesize this compound result in low purity (≤40% by weight) owing to close thermodynamic competition with Li 2 O and MnO at low temperature. However, it is shown that a much higher purity of 85% by weight can be achieved by combining Li excess with rapid cooling from high temperature, which effectively stabilizes the Li 6 MnO 4 phase. The synthesized product delivers a high irreversible Li release capacity that exceeds 700 mAh g −1 by utilizing combined Mn oxidation (Mn 2+/3+ and Mn 3+/4+ ) and O oxidation. These results demonstrate that Li 6 MnO 4 may therefore be useful as a potential sacrificial cathode additive in Li‐ion batteries and motivate further investigation of other structurally‐related compounds. While attempts were made to synthesize two additional compounds among computationally screened candidates, it was not successful to experimentally realize the two candidates. The difficulty of experimental realization of the newly predicted materials remains a challenge and it is suggested that more efforts need to be devoted to developing computational techniques to precisely predict synthesizability and propose potential synthetic routes of the predicted materials.

Kim, Haegyeom↗
DOE OSTI2023

Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Abstract Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid‐state reactions, leading to crystal formation of kinetically stable compounds. In this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two‐dimensional Sr(Ag 1− x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1− x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1− x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1− x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1− x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution ( x ). Therefore, the band gap of Sr(Ag 1− x Li x ) 2 Se 2 can be precisely tuned via fine‐tuning x that is controlled by only the flux ratio and temperature.

Zhou, Xiuquan↗
DOE OSTI2023

Sr(Ag 1-x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] Tunable Direct Band Gap Semiconductors

Synthesizing solids in molten fluxes enables the rapid diffusion of soluble species at temperatures lower than in solid-state reactions, leading to crystal formation of kinetically stable compounds. Here, in this study, we demonstrate the effectiveness of mixed hydroxide and halide fluxes in synthesizing complex Sr/Ag/Se in mixed LiOH/LiCl. We have accessed a series of two-dimensional Sr(Ag 1-x Li x ) 2 Se 2 layered phases. With increased LiOH/LiCl ratio or reaction temperature, Li partially substituted Ag to form solid solutions of Sr(Ag 1-x Li x ) 2 Se 2 with x up to 0.45. In addition, a new type of intergrowth compound [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] was synthesized upon further reaction of Sr(Ag 1-x Li x ) 2 Se 2 with SrSe. Both Sr(Ag 1-x Li x ) 2 Se 2 and [Sr 3 Se 2 ][(Ag 1-x Li x ) 2 Se 2 ] exhibit a direct band gap, which increases with increasing Li substitution (x). Therefore, the band gap of Sr(Ag 1-x Li x ) 2 Se 2 can be precisely tuned via fine-tuning x that is controlled by only the flux ratio and temperature.

2D materials↗
DOE OSTI2021

Fast and Scalable Synthesis of LiNi 0.5 Mn 1.5 O 4 Cathode by Sol–Gel-Assisted Microwave Sintering

High-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) is a promising cathode material for high-energy-density and high-power-density lithium-ion batteries (LIBs). The high cost of the currently available LIBs needs to be addressed urgently for wide application in the transport sector (electric vehicles, buses) and large-scale energy storage systems (ESS). Of significance, herein, novel fast and scalable microwave-assisted synthesis of LNMO is reported, which leads to a production cost cut. X-ray diffraction (XRD) analysis confirms the formation of the desired phase with high crystallinity. Field emission scanning (FE-SEM) and transmission electron microscopy (TEM) analyses indicate that the synthesized phase is of nanometric size (50–150 nm) due to an extremely short sintering time (20 min). The material synthesized at 750 °C shows a higher initial discharge capacity (130 mA h g -1 ) than that synthesized at 650 °C (115 mA h g -1 ). The materials heat treated at higher temperatures show better electrochemical performance in terms of initial capacity, rate capability, and improved cycling. The improved electrochemical performance of LNMO at 750 °C is attributed to the formation of a stable crystal structure, low charge transfer resistance at the electrode/electrolyte interface, high electrical conductivity due to the presence of a disorder structure, and improved ionic diffusivity.

25 ENERGY STORAGE↗
DOE OSTI2023

Microwave‐Assisted Synthesis of SrTiO 3 Nanocuboids without TiCl 4

Strontium titanate (STO) nanocuboids are a novel support for Pt nanoparticle catalysts (Pt/STO). The first of many steps in commercializing Pt/STO will be developing a scalable, environmentally sustainable, and cost‐effective STO nanocuboid synthesis. Herein, Sr–Ti–OH mixtures are synthesized from various Sr 2+ and Ti 4+ reagents and treated by convection‐ and microwave‐assisted heating to obtain STO nanoparticles. These experiments clarify how phase composition of the prehydrothermal Sr–Ti–OH mixture and choice of heating method affect final nanoparticle morphology. In Sr–Ti–OH mixtures synthesized with TiCl 4 , STO is the most stable phase and precipitates prior to heating, while titania sol–gels are the most stable phase when other Ti 4+ sources are used. STO nanocrystals always form when Sr–Ti–OH mixtures are treated by convection heating, though nanocuboids are only observed if STO precipitates from the Sr–Ti–OH mixture. Microwave‐assisted hydrothermal treatment more rapidly heats the precursor solution, and thus, STO nanocuboids can form from a variety of Sr–Ti–OH mixtures regardless of mixture composition. Two microwave syntheses of STO nanocuboids are reported: one which uses TiCl 4 as a Ti 4+ source, and another that uses titanium(IV) bis(ammonium lactato) dihydroxide ([NH 4 CH 3 CH(O)CO 2 ] 2 Ti(OH) 2 ), a water‐stable Ti 4+ complex.

Peczak, Ian L.↗
DOE OSTI2021

Partial oxidation of isobutylene using Ni TiO x

In this work, we report an aerobic partical oxidation of isobutylene into isoprene, acetone, and p-xylene using a mesoporous Ni TiO x catalytic material. In this work, two catalysts were found to synthesize two of these three valuable products with high selectivity, with p-xylene being synthesized with a selectivity of 46.0% and isoprene being synthesized with a selectivity of 64.7%, with overall conversions of isobutylene being 34.0% and 11.9% respectively. These reactions were done at relatively low temperatures. (300°C or below) and are conducted at flow rates of 10 sccm oxygen and isobutylene. The nickel titania catalysts were studied extensively using various characterization methodologies such as TEM, Raman, XRD, and XRF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗
DOE OSTI2020

Linking chemical precursors to the synthesis of erythritol tetranitrate

Erythritol tetranitrate (ETN) is a homemade explosive with high explosive performance which can easily be synthesized using widely available chemical precursors. Ascertaining the manner in which ETN is synthesized and being able to trace the ETN back to its precursor materials may aid in the forensic identification. As a proof of concept, seven different types of ETN were synthesized with laboratory grade materials as well as commercially available chemicals from the hardware store and grocery store. The seven different types of solid ETN and the reaction quenches were analyzed using high performance liquid chromatography (HPLC). Partial least squares discriminant analysis (PLS-DA) was used to probe the different classes of ETN and reaction quenches. Several PLS-DA models were produced with the seven different types of ETN and quenches having their own classification, ETN and quenches based on their acid source, and ETN and the quenches based on their nitrate source. Regardless of which classification manner was used, there were no differences found between the different types of ETN or their reaction quenches. Furthermore, it is demonstrated that there is inherent variability in the synthesis of ETN making HPLC an unreliable method to determine the source of the synthesis materials. Elemental impurities were measured in seven solid ETN samples and their reaction quenches by inductively coupled plasma mass spectrometry (ICP-MS). No differences were discovered between the solid ETN samples, but there were trace metals found in the reaction quenches which were found to be identifiers of the source material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Porosity in Sr 1-x Ca x FeO 3-δ oxygen carriers: The role of surface area and pretreatment on storage activity

Perovskite oxides have generated interest as robust, low-temperature oxygen carrier materials for a variety of clean energy applications, including chemical looping gasification and air separations. Methods to improve O 2 desorption kinetics are vital to allow these carriers to compete economically with traditional metal oxide carriers or cryogenic separations. In this report we investigated the cumulative roles that surface area, pretreatment, and elemental composition have on the oxygen storage properties of a state-of-the-art carrier system, Sr 1-x Ca x FeO 3-δ (x = 0.20, 0.25, 0.30) synthesized using multiple methods. Porous materials synthesized by the Pechini, or citrate, method had their surface area controlled using the synthesis temperature. The high surface area of the Sr 0.7 Ca 0.3 FeO 3-δ materials is most beneficial at low operating temperatures, such as 350 and 400 °C, as their reduction rates are twice as fast as those obtained with their bulk counterparts. These effects are observed at higher operating temperatures and within a single composition, but temperature tunability using variable Ca 2+ substitution in the Sr 1-x Ca x FeO 3-δ overshadows the improvements gained from higher surface areas. Additionally, we establish that pretreatment in N2 at an elevated temperature is necessary to enhance kinetics further. For maximum efficiency, pretreatment at the synthesis temperature is suggested for the Pechini method-synthesized systems, whereas 800 °C is adequate for bulk materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The influence of hydrothermal synthesis temperature on the electronic structure and luminescence property of Cr-doped ZnGa 2 O 4 nanoparticles

Cr-doped ZnGa 2 O 4 (CZGO) is a near-infrared-emitting material with long-lasting persistent luminescence. This unique property makes it a great candidate in optical imaging and sensing for various biomedical applications. Nanosized CZGO can be synthesized via a hydrothermal approach, but the reaction temperatures reported in existing literature vary from 120°C to 220°C, approaching the highest temperature allowed for a standard autoclave vessel. The reason for choosing a particular hydrothermal synthesis temperature has rarely been discussed, and it is unclear whether the resulting CZGO possess the same optical properties. This work compares CZGO nanoparticles synthesized at temperatures from the lowest reported 120°C and to as high as 220°C. We find that although all the synthesized CZGO are light emitting, they exhibit different luminescence intensities and respond differently to the change of excitation energy. X-ray absorption fine structure (XAFS) analysis is employed to investigate the local chemical environment around Zn, Ga and Cr, respectively. We found synthesis temperature strongly influences the Ga species formed in these particles. The energy transfer mechanism is further elucidated using X-ray excited optical luminescence (XEOL) in combination with element-specific XAFS. Two energy transfer paths are identified, which explains the different excitation energy dependencies of the observed photoluminescence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis and thermodynamics of uranium-incorporated α-Fe 2 O 3 nanoparticles

Hematite nanoparticles were synthesized with U(VI) in circumneutral water through a coprecipitation and hydrothermal treatment process. XRD, TEM, and EXAFS analyses reveal that uranium may aggregate along grain boundaries and occupy Fe sites within hematite. The described synthesis method produces crystalline, single-phase iron oxide nanoparticles absent of surface-bound uranyl complexes. EXAFS data were comparable to spectra from existing studies whose syntheses were more representative of naturally occurring, extended aging processes. Herein this work provides and validates an accelerated method of synthesizing uranium-immobilized iron oxide nanoparticles for further mechanistic studies. High temperature oxide melt solution calorimetry measurements were performed to calculate the thermodynamic stability of uranium-incorporated iron oxide nanoparticles. Increasing uranium content within hematite resulted in more positive formation enthalpies. Standard formation enthalpies of U x Fe 2–2x O 3 were as high as 76.88 ± 2.83 kJ/mol relative to their binary oxides, or -764.04 ± 3.74 kJ/mol relative to their constituent elements, at x = 0.037. Data on the thermodynamic stability of uranium retention pathways may assist in predicting waste uranyl remobilization, as well as in developing more effective methods to retain uranium captured from aqueous environments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesis of PHI-type zeolite harmotome using barium as an inorganic structure-directing agent inspired from natural mineral compositions

Zeolites are nanoporous aluminosilicates widely used as commercial adsorbents, heterogeneous catalysts, and ion-exchange materials due to their unique porosity, acidity, and thermal stability. The vast majority of synthetically-realized zeolite structures are prepared under hydrothermal conditions in alkaline media, and often in the presence of an organic structure-directing agent that facilitates the crystallization of diverse porous networks. Due to economic and environmental disadvantages of organic-based syntheses, it is often desirable to produce zeolites in organic-free media using alkali metal ions as the most commonly employed inorganic structure-directing agents (ISDAs). Here, in this study, we were inspired by the elemental compositions of natural zeolite minerals to examine the use of an alkaline earth metal ion as the ISDA to prepare zeolites with the PHI framework type. Two natural minerals exhibiting this crystal structure are phillipsite and harmotome. Both structures contain sodium and potassium as extra-framework cations, but only harmotome contains barium cations. Here we examined how the combination of alkali and alkaline earth ISDAs promote the formation of PHI-type zeolites. Our findings reveal that each isostructure is prepared under different synthesis conditions where simply adding barium to a growth mixture does not always lead to harmotome formation. Harmotome is formed in more dilute and alkaline growth media; however, time-resolved analyses of zeolite crystallization reveal that harmotome can be synthesized at low temperatures (ca. 65 °C) with rates that are 5-times faster than syntheses of phillipsite. This seemingly indicates that barium reduces the energetic barrier for PHI-type zeolite nucleation in ways that are not fully understood. Moreover, harmotome crystals exhibit an average particle size of ca. 60 nm, which is nearly 40-fold smaller than phillipsite crystals prepared under similar conditions. Collectively, these findings identify routes to control crystallization of PHI-type zeolites and may provide a broader strategy for using the composition of natural zeolite minerals to optimize the preparation of synthetic analogues.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Towards additive manufacturing of magnetocaloric working materials

The feasibility of three-dimensional printing via the Directed Energy Deposition (DED) technique is demonstrated for the ferromagnetic AlFe 2 B 2 (aka 1-2-2) compound, which shows promise as a working material for room-temperature magnetocaloric devices. Like many intermetallic materials, the 1-2-2 compound is brittle at room temperature; not only is it difficult to synthesize from the melt, it is challenging to form it into useful geometries necessary for effective heat transfer in magnetocaloric devices. Using Laser Engineered Net Shaping (LENS TM ) synthesis from two powder precursors, AlB 2 and Fe, samples of simple (rod) and complex (honeycomb) architectures were successfully synthesized. Furthermore, the phase constitution and distribution, magnetic transition temperature, and saturation magnetization determined for the LENS TM -synthesized rod sample are all similar to those obtained for 1-2-2 materials made by conventional casting. Further, the measured magnetic entropy change, as determined from Maxwell's Relations applied to magnetic data, indicates that the magnetocaloric response of the annealed LENS TM -printed rod samples are comparable to those of the 1-2-2 compounds made by conventional techniques. These results confirm that complex magnetofunctional shapes, which are needed for efficient energy conversion in magnetocaloric devices, can be rapidly fabricated from the AlFe 2 B 2 compound.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Thermally stable and self-healable lignin-based polyester

The increased use of plastics and the associated environmental impact has catalyzed research on the development of bio-derived polymers. Bio-based polyesters have gained increased attention due to the abundance of their starting materials and ease of processing. Lignin is naturally occurring in biomass with rich carbon content, whose functionality and rigidity make it an ideal bio-derived candidate for bio-based polyesters. Herein, a lignin-based polyester with good thermal stability and self-repairability was synthesized from carboxylated lignin and epoxidized soybean oil. The synthesized lignin/epoxidized soybean oil (ESO) vitrimer was brittle such that its mechanical performance could not be recorded. However, when polyethylene glycol (PEG) was incorporated as a plasticizer, polymer samples exhibited acceptable ductility. From thermomechanical analysis of the synthesized polyesters, the plasticizer did not impair thermal stability of polymers, but greatly enhanced mechanical properties. Notably, all samples exhibited stability at high temperatures, and good glass transition temperatures (51.0 ± 0.9–78.0 ± 1.2 °C). The highest tensile strength (3.983 ± 0.1 MPa) and storage modulus (1463.67 ± 12.6 MPa) were recorded for the polyester containing 6 % w/w PEG. Moreover, the polymer samples exhibited self-healing capability at 180 °C. This work expands on valorization of lignin through the synthesis of bio-derived materials.

36 MATERIALS SCIENCE↗