Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Synthesis of NaTi 2 ( PO 4 ) 3 by the Inorganic–Organic Steric Entrapment Method and Its Thermal Expansion Behavior

Crystalline pure NaTi 2 ( PO 4 ) 3 ( NTP ) powder was synthesized at 700°C using a simple and low energy, hybrid inorganic–organic, steric entrapment method. Sodium nitrite (Na NO 2 ) and ammonium phosphate dibasic (( NH 4 ) 2 HPO 4 ) dissolved in water, whereas titanium ( IV ) isopropoxide (Ti[ OCH ( CH 3 ) 2 ] 4 ) hydrolyzed in water. Ethylene glycol ( HOCH 2 CH 2 OH ) was used as a polymeric entrapper and hydrolysis of the Ti source was hindered by its dissolution in isopropyl alcohol. The resulting NTP powder was characterized by thermogravimetric analysis/differential thermal analysis, X‐ray diffractometry, scanning electron microscopy, specific surface area by Brunauer–Emmett–Teller nitrogen absorption, and particle size analysis. Furthermore, C, H, N were measured by the classical Pregl‐Dumas method. The thermal expansion behavior in all { hkl } pole directions was also determined by in situ high‐temperature X‐ray diffraction using synchrotron radiation and was found to be in agreement with other published studies.

Ribero, Daniel↗
DOE OSTI2016

The Enantioselective Total Synthesis of Exochomine

Abstract Molecules that possess fully substituted chiral centers are often challenging to construct, particularly if those centers connect two seemingly different halves or include a nitrogen atom. Herein, we describe an efficient approach to a molecule that combines both challenges in a single center in the form of exochomine. Failures in direct coupling led to a design fueled by highly specific reaction conditions for several steps and the development of an improved protocol for 1,4‐reduction in a hindered context where numerous side reactions were possible. These chemoselective solutions should have value to other problems. Challenges in obtaining matching spectral data for the synthesized natural product are also discussed.

Gao, Alison X.↗
DOE OSTI2017

Synthesis and Stability of Lanthanum Superhydrides

Recent theoretical calculations predict that megabar pressure stabilizes very hydrogen-rich simple compounds having new clathrate-like structures and remarkable electronic properties including room-temperature superconductivity. X-ray diffraction and optical studies demonstrate that superhydrides of lanthanum can be synthesized with La atoms in an fcc lattice at 170 GPa upon heating to about 1000 K. The results match the predicted cubic metallic phase of LaH10 having cages of thirty-two hydrogen atoms surrounding each La atom. Upon decompression, the fcc-based structure undergoes a rhombohedral distortion of the La sublattice. The superhydride phases consist of an atomic hydrogen sublattice with H-H distances of about 1.1 Å, which are close to predictions for solid atomic metallic hydrogen at these pressures. With stability below 200 GPa, the superhydride is thus the closest analogue to solid atomic metallic hydrogen yet to be synthesized and characterized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Thermal Unequilibrium of PdSn Intermetallic Nanocatalysts: From In Situ Tailored Synthesis to Unexpected Hydrogenation Selectivity

Effective control on chemoselectivity in the catalytic hydrogenation of C=O over C=C bonds is uncommon with Pd-based catalysts because of the favored adsorption of C=C bonds on Pd surface. Here we report a unique orthorhombic PdSn intermetallic phase with unprecedented chemoselectivity toward C=O hydrogenation. We observed the formation and metastability of this PdSn phase in situ. During a natural cooling process, the PdSn nanoparticles readily revert to the favored Pd 3 Sn 2 phase. Instead, using a thermal quenching method, we prepared a pure-phase PdSn nanocatalyst. Furthermore, PdSn shows an >96% selectivity toward hydrogenating C=O bonds of various α,β-unsaturated aldehydes, highest in reported Pd-based catalysts. Further study suggests that efficient quenching prevents the reversion from PdSn- to Pd 3 Sn 2 -structured surface, the key to the desired catalytic performance. Density functional theory calculations and analysis of reaction kinetics provide an explanation for the observed high selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Biopolymer‐assisted Synthesis of P‐doped TiO 2 Nanoparticles for High‐performance Lithium‐ion Batteries: A Comprehensive Study

Abstract TiO 2 material has gained significant attention for large‐scale energy storage due to its abundant, low‐cost, and environmentally friendly properties, as well as the availability of various nanostructures. Phosphorus doping has been established as an effective technique for improving electronic conductivity and managing the slow ionic diffusion kinetics of TiO 2 . In this study, non‐doped and phosphorus doped TiO 2 materials were synthesized using sodium alginate biopolymer as chelating agent. The prepared materials were evaluated as anode materials for lithium‐ion batteries (LIBs). The electrodes exhibit remarkable electrochemical performance, including a high reversible capacity of 235 mAh g −1 at 0.1 C and excellent first coulombic efficiency of 99 %. An integrated approach, combining operando XRD and ex‐situ XAS, comprehensively investigates the relationship between phosphorus doping, material structure, and electrochemical performance, reinforced by analytical tools and first principles calculations. Furthermore, a full cell was designed using 2 %P‐doped TiO 2 anode and LiFePO 4 cathode. The output voltage was about 1.6 V with high initial specific capacity of 148 mAh g −1 , high rate‐capability of 120 mAh g −1 at 1 C, and high‐capacity retention of 96 % after 1000 cycles at 1 C.

El Halya, Nabil↗
DOE OSTI2017

An optimization-based web application for synthesis and analysis of biomass-to-fuel strategies: An optimization-based web application for synthesis and analysis of biomass-to-fuel strategies

We develop an optimization-based web application for assessing biomass-to-fuels strategies based on the Biomass Utilization Superstructure (BUS) framework. This web application allows researchers with limited knowledge of optimization to assess different technologies employed at different strategies and identify the major cost drivers. The user must only provide the necessary parameters and create an optimization run after identifying the question to be addressed and the assessment metric. The web application generates visual representations of the results once the optimal solution is obtained. Finally, we demonstrate the applicability of the web application through an example.

09 BIOMASS FUELS↗
DOE OSTI2017

Polypeptoid polymers: Synthesis, characterization, and properties

Polypeptoids, a class of peptidomimetic polymers, have emerged at the forefront of macromolecular and supramolecular science and engineering as the technological relevance of these polymers continues to be demonstrated. The chemical and structural diversity of polypeptoids have enabled access to and adjustment of a variety of physicochemical and biological properties (eg, solubility, charge characteristics, chain conformation, HLB, thermal processability, degradability, cytotoxicity and immunogenicity). These attributes have made this synthetic polymer platform a potential candidate for various biomedical and biotechnological applications. Furthermore, this review will provide an overview of recent development in synthetic methods to access polypeptoid polymers with well–defined structures and highlight some of the fundamental physicochemical and biological properties of polypeptoids that are pertinent to the future development of functional materials based on polypeptoids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Heterolysis of H 2 Across a Classical Lewis Pair, 2,6-Lutidine∙BCl3: Synthesis, Characterization, and Mechanism

In this study, we report that 2,6-lutidine∙trichloroborane (Lut∙BCl 3 ) reacts with H 2 in toluene, bromobenzene, dichloromethane, and Lut solvents producing the neutral hydride, Lut∙BHCl 2 . The mechanism was modeled with density functional theory, and energies of stationary states were calculated at the G3(MP2)B3 level of theory. Lut∙BCl 3 was calculated to react with H 2 and form the ion pair, [LutH + ][HBCl 3 – ], with a barrier of ΔH ≠ =24.7 kcal mol –1 (ΔG ≠ =29.8 kcal mol –1 ). Metathesis with a second molecule of Lut∙BCl 3 produced Lut∙BHCl 2 and [LutH + ][BCl 4 – ]. The overall reaction is exothermic by 6.0 kcal mol –1 (Δ r G°=–1.1). Alternate pathways were explored involving the borenium cation (LutBCl 2 + ) and the four-membered boracycle [(CH 2 {NC 5 H 3 Me})BCl 2 ]. Barriers for addition of H 2 across the Lut/LutBCl 2 + pair and the boracycle B—C bond are substantially higher (ΔG ≠ =42.1 and 49.4 kcal mol –1 , respectively), such that these pathways are excluded. The barrier for addition of H 2 to the boracycle B—N bond is comparable (ΔH ≠ =28.5 and ΔG ≠ =32 kcal mol –1 ). Conversion of the intermediate 2-(BHCl 2 CH 2 )-6-Me(C 5 H 3 NH) to Lut∙BHCl 2 may occur by intermolecular steps involving proton/hydride transfers to Lut/BCl 3 . Intramolecular protodeboronation, which could form Lut∙BHCl 2 directly, is prohibited by a high barrier (ΔH ≠ =52, ΔG ≠ =51 kcal mol –1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Evidence of Cu I /Cu II Redox Process by X‐ray Absorption and EPR Spectroscopy: Direct Synthesis of Dihydrofurans from β‐Ketocarbonyl Derivatives and Olefins

Abstract The Cu I /Cu II and Cu I /Cu III catalytic cycles have been subject to intense debate in the field of copper‐catalyzed oxidative coupling reactions. A mechanistic study on the Cu I /Cu II redox process, by X‐ray absorption (XAS) and electron paramagnetic resonance (EPR) spectroscopies, has elucidated the reduction mechanism of Cu II to Cu I by 1,3‐diketone and detailed investigation revealed that the halide ion is important for the reduction process. The oxidative nature of the thereby‐formed Cu I has also been studied by XAS and EPR spectroscopy. This mechanistic information is applicable to the copper‐catalyzed oxidative cyclization of β‐ketocarbonyl derivatives to dihydrofurans. This protocol provides an ideal route to highly substituted dihydrofuran rings from easily available 1,3‐dicarbonyls and olefins.

Yi, Hong↗
DOE OSTI2019

Cyanohydridoborate Anions: Synthesis, Salts, and Low‐Viscosity Ionic Liquids

Abstract High‐yield syntheses up to molar scales for salts of [BH(CN) 3 ] − ( 2 ) and [BH 2 (CN) 2 ] − ( 3 ) starting from commercially available Na[BH 4 ] (Na 5 ), Na[BH 3 (CN)] (Na 4 ), BCl 3 , (CH 3 ) 3 SiCN, and KCN were developed. Direct conversion of Na 5 into K 2 was accomplished with (CH 3 ) 3 SiCN and (CH 3 ) 3 SiCl as a catalyst in an autoclave. Alternatively, Na 5 is converted into Na[BH{OC(O) R } 3 ] ( R =alkyl) that is more reactive towards (CH 3 ) 3 SiCN and thus provides an easy access to salts of 2 . Some reaction intermediates were identified, for example, Na[BH(CN){OC(O)Et} 2 ] (Na 7 b ) and Na[BH(CN) 2 {OC(O)Et}] (Na 8 b ). A third entry to 2 and 3 uses ether adducts of BHCl 2 or BH 2 Cl such as the commercial 1,4‐dioxane adducts that react with KCN and (CH 3 ) 3 SiCN. Alkali metal salts of 2 and 3 are convenient starting materials for organic salts, especially for low viscosity ionic liquids (ILs). [EMIm] 3 has the lowest viscosity and highest conductivity with 10.2 mPa s and 32.6 mS cm −1 at 20 °C known for non‐protic ILs. The ILs are thermally, chemically, and electrochemically robust. These properties are crucial for applications in electrochemical devices, for example, dye‐sensitized solar cells (Grätzel cells).

Bischoff, Lisa A.↗