Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Swath Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Intercomparison of wind speeds inferred by the SASS, altimeter, and SMMR

The operational theory, control algorithms, and comparisons with surface-determined wind speeds for the scatterometer (SASS), altimeter (ALT), and passive microwave radiometer (SMMR) on board the Seasat satellite are presented. Radiative scattering combining specular reflections and Bragg resonance scattering are noted to occur at tilting waves and sea foam, two conditions highly correlated with wind speed. SASS scans swaths of 70, 200, and 700 km from nadir, the SMMR covers a 150 km strip. Normalized radar sections are derived from the SASS and ALT telemetry, and brightness temperature from the SMMR. ALT winds were found to be biased about 3 m/sec low, while intercomparison between the SMMR and SASS data showed a mean difference of 0.3 m/sec with a standard deviation from measured winds of 1.7 m/sec or less. The effects of land thermal emissions, rain, and sun glint are discussed, and good viewing conditions are concluded to result in 2 m/sec accuracy.

Wentz, F. J.↗

Airborne Doppler lidar observations of convective phenomena in Oklahoma

On 30 June 1981, the wind fields around a variety of convective clouds, ranging from large thunderstorm complexes to isolated cumulus congestus, were observed in Oklahoma using an airborne Doppler lidar operated by NASA. By steering the pulsed infrared laser beam alternately along differing horizontal directions, a network of independent radial velocity measurements is obtained, which permits high-resolution synthesis of the full horizontal wind vector field in a swath adjacent to the aircraft flight track. The bright reflections of the laser signal by cloud surfaces permit direct identification of the locus of cloud edges, information which is prerequisite to detailed study of the relationships between the winds inside and outside clouds. The horizontal wind fields derived from the lidar data reveal waves and vortices along the gust front of a storm which eventually produced a gust-front tornado, and cloud-scale convergence patterns around an isolated cumulus congestus. Despite the presence of some questionable data associated with undersampling and delayed recording of certain aircraft motion parameters, most of the lidar results appear consistent with cloud photographs made during the experiment, with surface meteorological data, with aircraft flight-level wind data, and with previous observational and theoretical work.

Mccaul, Eugene W., Jr.↗

Ice-Over-Water Cloud Identification in an Artificial Neural Network Approach

An artificial neural network (ANN) algorithm, employing several Aqua MODIS channels, the retrieved cloud phase and total cloud visible optical depth, and temperature and humidity vertical profiles is trained to detect multilayer (ML) ice-over-water cloud systems identified by matched 2008 CloudSat and CALIPSO (CC) data. The trained MLANN was applied to 2009 MODIS data resulting in combined ML and single layer detection accuracies of 87% (89%) and 86% (89%) for snow-free (snow-covered) regions during the day and night, respectively. When corrected for the viewing-zenith-angle dependence of each parameter, the ML fraction detected is relatively invariant across the swath. Compared to the CC ML variability, the MLANN is robust seasonally and interannually, and produces similar distribution patterns over the globe, except in the polar regions. Additional research is needed to conclusively evaluate the VZA dependence and further improve the MLANN accuracy. This approach should greatly improve the monitoring of cloud vertical structure using operational passive sensors.

MODIS↗

Estimation Of Ocean-Surface Winds From Seasat Data

Report discusses performance of recently developed method of estimating mesoscale near-surface winds over ocean from normalized cross sections of radar backscatter from surface of ocean. Based on geophysical model that, in turn, based on geostrophic approximation and upon simplistic assumptions about divergence and vorticity of wind field, but also includes nongeostrophic winds. Compared with older method. Newer method yields more-accurate estimates of wind field, fewer gaps, and wider swaths.

Long, David G.↗

Polar Environmental Monitoring

The present and projected benefits of the polar regions were reviewed and then translated into information needs in order to support the array of polar activities anticipated. These needs included measurement sensitivities for polar environmental data (ice/snow, atmosphere, and ocean data for integrated support) and the processing and delivery requirements which determine the effectiveness of environmental services. An assessment was made of how well electromagnetic signals can be converted into polar environmental information. The array of sensor developments in process or proposed were also evaluated as to the spectral diversity, aperture sizes, and swathing capabilities available to provide these measurements from spacecraft, aircraft, or in situ platforms. Global coverage and local coverage densification options were studied in terms of alternative spacecraft trajectories and aircraft flight paths.

Nagler, R. G.↗

SeaMARC 2 side-scan images of submarine volcanoes: Potential analogues for Venus

The Earth's surface beneath the oceans may be very similar, in terms of ambient pressures, to the surface of Venus. For that reason it is particularly important for geologists studying the surface of Venus to understand the processes which form features on the floors of the oceans. With the SeaMARC 2 seafloor mapping system, it is possible to view a swath of seafloor that is 10 km wide (about 6.2 mi). Side scan images of the Mariana region show that volcanoes of the island arc are more complicated than previously realized and that features of the fore-arc region, which resemble volcanoes morphologically, may result from processes other than volcanism. By comparing data obtained from the ocean floor with radar images of Venus, the geological evolution of that planet may be more fully understood.

Fryer, P.↗

The Aquarius Mission: Sea Surface Salinity from Space

Aquarius is a new satellite mission concept to study the impact of the global water cycle on the ocean, including the response of the ocean to buoyancy forcing and the subsequent feedback of the ocean on the climate. The measurement objective of Aquarius is sea surface salinity, which reflects the concentration of freshwater at the ocean surface. Salinity affects the dielectric constant of sea water and, consequently, the radiometric emission of the sea surface to space. Rudimentary space observations with an L-band radiometer were first made from Skylab in the mid-70s and numerous aircraft missions of increasing quality and improved technology have been conducted since then. Technology is now available to carry out a global mission, which includes both an accurate L band (1.413 Ghz) radiometer and radar system in space and a global array of in situ observations for calibration and validation, in order to address key NASA Earth Science Enterprise questions about the global cycling of water and the response of the ocean circulation to climate change. The key scientific objectives of Aquarius examine the cycling of water at the ocean's surface, the response of the ocean circulation to buoyancy forcing, and the impact of buoyancy forcing on the ocean's thermal feedback to the climate. Global surface salinity will also improve our ability to model the surface solubility chemistry needed to estimate the air-sea exchange of CO2. In order to meet these science objectives, the NASA Salinity Sea Ice Working Group over the past three years has concluded that the mission measurement goals should be better than 0.2 practical salinity units (psu) accuracy, 100 km resolution, and weekly to revisits. The Aquarius mission proposes to meet these measurement requirements through a real aperture dual-polarized L band radiometer and radar system. This system can achieve the less than 0.1 K radiometric temperature measurement accuracy that is required. A 3 m antenna at approx. 600km altitude in a sun-synchronous orbit and 300 km swath can provide the desired 100 km resolution global coverage every week. Within this decade, it may be possible to combine satellite sea surface salinity measurements with ongoing satellite observations of temperature, surface height, air-sea fluxes; vertical profiles of temperature and salinity from the Argo program; and modern ocean/atmosphere modeling and data assimilation tools, in order to finally address the complex influence of buoyancy on the ocean circulation and climate.

Koblinsky, Chester↗

Evaluation of the spatial and temporal measurement requirements of remote sensors for monitoring regional air pollution episodes

The spatial and temporal measurement requirements of satellite sensors for monitoring regional air pollution episodes were evaluated. Use was made of two sets of data from the Sulfate Regional Experiment (SURE), which provided the first ground-based aerosol measurements from a regional-scale station network. The sulfate data were analyzed for two air pollution episode cases. The results of the analysis indicate that the key considerations required for episode mapping from satellite sensors are the following: (1) detection of sulfate levels exceeding 20 micron-g/cu m; (2) capability to view a broad area (of the order of 1500 km swath) because of regional extent of pollution episodes; (3) spatial resolution sufficient to detect variations in sulfate levels of greater than 10 micron-g/cu m over distances of the order of 50 to 75 km; (4) repeat coverage at least on a daily basis; and (5) satellite observations during the mid to late morning local time, when the sulfate levels have begun to increase after the early morning minimum levels, and convective-type cloud cover has not yet increased to the amount reached later in the afternoon. Analysis of the satellite imagery shows that convective clouds can obscure haze patterns. Additional parameters based on spectral analysis include wavelength and bandwidth requirements.

Burke, H. H. K.↗

Programmable Hyperspectral Imaging Mapper

Programmable hyperspectral imaging mapper (PHIMAP) is conceptual generic advanced spectral imaging system that scans swath along ground track from airplane or spacecraft in orbit. Features include spectrally agile filters and processing on focal-plane array. Provides both high spatial resolution and large number of spectral channels. Can be programmed to trade spectral resolution andspectral coverage flexibly against signal-to-noise ratio to optimize utility of image data from scenes of spectrally and spatially varying brightness.

Cutts, James A.↗

Wind Retrieval Algorithms for the IWRAP and HIWRAP Airborne Doppler Radars with Applications to Hurricanes

Algorithms for the retrieval of atmospheric winds in precipitating systems from downward-pointing, conically-scanning airborne Doppler radars are presented. The focus in the paper is on two radars: the Imaging Wind and Rain Airborne Profiler(IWRAP) and the High-altitude IWRAP (HIWRAP). The IWRAP is a dual-frequency (Cand Ku band), multi-beam (incidence angles of 30 50) system that flies on the NOAAWP-3D aircraft at altitudes of 2-4 km. The HIWRAP is a dual-frequency (Ku and Kaband), dual-beam (incidence angles of 30 and 40) system that flies on the NASA Global Hawk aircraft at altitudes of 18-20 km. Retrievals of the three Cartesian wind components over the entire radar sampling volume are described, which can be determined using either a traditional least squares or variational solution procedure. The random errors in the retrievals are evaluated using both an error propagation analysis and a numerical simulation of a hurricane. These analyses show that the vertical and along-track wind errors have strong across-track dependence with values of 0.25 m s-1 at nadir to 2.0 m s-1 and 1.0 m s-1 at the swath edges, respectively. The across-track wind errors also have across-track structure and are on average, 3.0 3.5 m s-1 or 10 of the hurricane wind speed. For typical rotated figure four flight patterns through hurricanes, the zonal and meridional wind speed errors are 2 3 m s-1.Examples of measured data retrievals from IWRAP during an eyewall replacement cycle in Hurricane Isabel (2003) and from HIWRAP during the development of Tropical Storm Matthew (2010) are shown.

atmospheric winds↗

JPSS-1 VIIRS Pre-Launch Radiometric Performance

The Visible Infrared Imaging Radiometer Suite (VIIRS) on-board the first Joint Polar Satellite System (JPSS) completed its sensor level testing on December 2014. The JPSS-1 (J1) mission is scheduled to launch in December 2016, and will be very similar to the Suomi-National Polar-orbiting Partnership (SNPP) mission. VIIRS instrument was designed to provide measurements of the globe twice daily. It is a wide-swath (3,040 kilometers) cross-track scanning radiometer with spatial resolutions of 370 and 740 meters at nadir for imaging and moderate bands, respectively. It covers the wavelength spectrum from reflective to long-wave infrared through 22 spectral bands [0.412 microns to 12.01 microns]. VIIRS observations are used to generate 22 environmental data products (EDRs). This paper will briefly describe J1 VIIRS characterization and calibration performance and methodologies executed during the pre-launch testing phases by the independent government team, to generate the at-launch baseline radiometric performance, and the metrics needed to populate the sensor data record (SDR) Look-Up-Tables (LUTs). This paper will also provide an assessment of the sensor pre-launch radiometric performance, such as the sensor signal to noise ratios (SNRs), dynamic range, reflective and emissive bands calibration performance, polarization sensitivity, bands spectral performance, response-vs-scan (RVS), near field and stray light responses. A set of performance metrics generated during the pre-launch testing program will be compared to the SNPP VIIRS pre-launch performance.

RSB↗

Mitigating Satellite-Based Fire Sampling Limitations in Deriving Biomass Burning Emission Rates: Application to WRF-Chem Model over the Northern sub-Saharan African Region

Largely used in several independent estimates of fire emissions, fire products based on MODIS sensors aboard the Terra and Aqua polar-orbiting satellites have a number of inherent limitations, including (a) inability to detect fires below clouds, (b) significant decrease of detection sensitivity at the edge of scan where pixel sizes are much larger than at nadir, and (c) gaps between adjacent swaths in tropical regions. To remedy these limitations, an empirical method is developed here and applied to correct fire emission estimates based on MODIS pixel level fire radiative power measurements and emission coefficients from the Fire Energetics and Emissions Research (FEER) biomass burning emission inventory. The analysis was performed for January 2010 over the northern sub-Saharan African region. Simulations from WRF-Chem model using original and adjusted emissions are compared with the aerosol optical depth (AOD) products from MODIS and AERONET as well as aerosol vertical profile from CALIOP data. The comparison confirmed an 30-50% improvement in the model simulation performance (in terms of correlation, bias, and spatial pattern of AOD with respect to observations) by the adjusted emissions that not only increases the original emission amount by a factor of two but also results in the spatially continuous estimates of instantaneous fire emissions at daily time scales. Such improvement cannot be achieved by simply scaling the original emission across the study domain. Even with this improvement, a factor of two underestimations still exists in the modeled AOD, which is within the current global fire emissions uncertainty envelope. Plain Language Summary Polar-orbiting satellites sensors, such as MODIS, have limitations in detecting fires under clouds or when viewing angles are large or in the gaps among satellites' different ground swaths. Here we developed an empirical method to mitigate the effect of these limitations in fire emission estimate. The method is applied to a fire emission inventory (FEER) based on MODIS. We show that, with our method, the adjusted emission inventory improves WRF-Chem simulation of smoke transport and distribution.

emissions properties↗

Global digital topography mapping using a scanning radar altimeter

The conceptual design of a Scanning Radar Altimeter system capable of collecting less than 300-m spatial and less than 3-m height resolution digital topography data for the entire globe, from an orbital platform, is presented. A 37-GHz frequency SRA system is used to achieve the requisite resolution while reducing antenna length in the along-track dimension. Near-global coverage in a short time period is obtained by scanning the antenna beam cross-track, in a swath of about 100 km. Attention is given to the algorithm that will be used to retrieve pixel height from the return waveform.

Elachi, C.↗

Shuttle Imaging Radar-A information and data availability

The performance characteristics of the Shuttle Imaging Radar (SIR-A), carried aloft on the STS-2 flight, are described and the results of its initial use are evaluated. The SIR-A is an SAR system operated at 1278 MHz (L-band), i.e., a wavelength of 23 cm. A seven panel antenna 9.4 m long was used, and scans were performed at a 50 deg angle of incidence to the center of a 50 km swath. Resolution is 40 m, and imagery is generated on a scale of 1:500,000. Sample images of a Brasilian island and the California coast are provided. Comparisons of the SIR-A imagery with Seasat SAR composite imagery demonstrate that the SIR-A is more sensitive to local roughness and only slightly dependent on terrain slope.

Holmes, A. L.↗

Lunar Lava Tubes - The Promise of New Orbital Data

The basaltic plains of the Moon contain lava channels on scales of tens of meters to hundreds of kilometers. Many of these channels are segmented, strongly suggesting that some portions include covered lava tubes. Lunar lava tubes are expected to provide unique environments below the harsh lunar surface, maintaining near-isothermal conditions and substantial shielding from solar and galactic radiation. A lava tube has often been suggested as natural shelter for a future human outpost. Previous searches for lunar lava tubes have been limited by a combination of image resolution and completeness of coverage. The five robotic Lunar Orbiter spacecraft combined to photograph essentially the entire lunar surface with a resolution of 60 m, and covered selected sites with resolutions as high as 2 m. The highest-resolution Apollo images, from the mapping and panoramic cameras, covered swaths totaling 16% of the lunar surface, at resolutions of approximately 5 m. The Lunar Reconnaissance Orbiter -- launched in June 2009 to a polar orbit -- carries a suite of instruments that will revolutionize lunar remote sensing, including the identification and characterization of lava tubes. The Lunar Reconnaissance Orbiter Camera (LROC) system includes a multi-spectral wide-angle camera with a resolution of 70 m, allowing a comprehensive survey of the entire lunar surface. The LROC narrow-angle camera is providing targeted images at resolutions of 0.5 - 2 m, including stereo coverage, which should allow detection of tube entrances and breakdown structures. The Lunar Orbiter Laser Altimeter is producing a global topographic map with a vertical resolution of 1 m and a horizontal resolution of 50 m. These data will be critical to understanding lava dynamics and tube emplacement.

Allen, Carlton C.↗

RadSTAR L-Band Imaging Scatterometer: Performance Assessment

RadSTAR is an instrument development program aimed at combining a radiometer and a scatterometer system into a highly compact configuration that uses a single, electronically scanned antenna to provide co-located and simultaneous measurements of emission and backscatter for airborne and spaceborne applications [I]. The program was designed to map soil moisture and ocean salinity, both important components of the water cycle, and to map sea ice density and thickness, an important factor in ocean-atmosphere heat exchange in Polar Regions. The accuracy in estimation of these and a number of other Earth science parameters can be greatly enhanced by providing the co-aligned radar/radiometer microwave measurements. For instance, radiometer estimates of soil moisture from soil emission are affected by emission from vegetation, and from the roughness of the surface. Complementary measurements using the scatterometer can be used to evaluate the vegetation and surface roughness effects. Hence, the combined observations can provide an improved estimate. As with soil moisture, the ocean salinity is a function of the microwave emission from the sea surface temperature (SST) and sea roughness. There, the addition of radar backscatter measurements of sea roughness enables the correction of the emissivity and provide more accurate estimates of ocean salinity. Similar arguments can be made for other important Earth science parameters. This paper discusses the RadSTAR program, the radar system design, calibration, and digital beamforming techniques, and presents preliminary analysis of the data collected during the test flights. The data sets obtained during the flights and during the radar calibration in the anechoic chamber are also employed to asses the performance of the radar. The paper also discusses the Digital Beamforming Synthetic Aperture Radar (DBSAR) processor, a real-time processor recently developed for the LIS instrument which enables beam synthesis, fine resolutions, and large swaths.

Rincon, Rafael↗

Multifrequency, Multipolarization External Calibration of the SIR-C/X-SAR Radars

Progress and the future plans for the following objectives are discussed: (1) Assess the accuracy at which the SIR-C/X-SAR standard data products can be calibrated through the use of ground calibrators to estimate the end-to-end system polarization calibration constants (or distortion parameters) and incorporate the constants into the data processing; (2) Study the cross-calibration between three multipolarization systems: SIR-C, the National Aeronautics and Space Administration/Jet Propulsion Laboratory (NASA/JPL) DC-8 SAR, and the University of Michigan ground-based polarimetric scatterometer; (3) Evaluate the calibration "stability" of SIR-C/X-SAR (measured by variations in the calibration constants) over the range swath width and over a specified distance in azimuth. Variations over a 12-hour period (between ascending and descending passes) will also be studied; and (4) Develop a cost-effective calibration plan including development of inexpensive polarimetric active calibrators.

Freeman, Anthony↗

Space-Based Lidar Observations of the 3D Structure of the Earth System

Lidar provides precise measurements of the three-dimensional structure of the clouds, aerosols, ocean/land/snow/ice surfaces, as well as ocean subsurface. Lidar also provides unique information about physical propertiesof particulates in the atmosphere for both radiative transfer and air quality applications.In this talk, I will present an overview of our recent studies of aerosols, clouds, ocean and snow using space-based lidar measurements (e.g., LITE, CALIPSO and ICESat-2), such as classifications of aerosols and thermodynamics phase of clouds, cloud microphysical properties, snow depths and phytoplankton biomass. I will also introduce a new concept of 3D Earth system observations with data fusion though combined active/passive remote sensing and machine learning. The new concept aims to reveal vertical structure of the aerosols/clouds/surfaces/subsurface from passive sensors by taking advantage of lidar measurements to effectively resolve the vertical structureby unscrambling the highly convoluted multi-angle, spectral and polarization information from passive sensors and apply the knowledge to a large swath where lidar measurements are not available.

Ali Omar↗