Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Subgrid scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Vertical dependence of horizontal variation of cloud microphysics: observations from the ACE-ENA field campaign and implications for warm-rain simulation in climate models

Abstract. In the current global climate models (GCMs), the nonlinearity effect of subgrid cloud variations on the parameterization of warm-rain process, e.g., the autoconversion rate, is often treated by multiplying the resolved-scale warm-rain process rates by a so-called enhancement factor (EF). In this study, we investigate the subgrid-scale horizontal variations and covariation of cloud water content (qc) and cloud droplet number concentration (Nc) in marine boundary layer (MBL) clouds based on the in situ measurements from a recent field campaign and study the implications for the autoconversion rate EF in GCMs. Based on a few carefully selected cases from the field campaign, we found that in contrast to the enhancing effect of qc and Nc variations that tends to make EF > 1, the strong positive correlation between qc and Nc results in a suppressing effect that tends to make EF < 1. This effect is especially strong at cloud top, where the qc and Nc correlation can be as high as 0.95. We also found that the physically complete EF that accounts for the covariation of qc and Nc is significantly smaller than its counterpart that accounts only for the subgrid variation of qc, especially at cloud top. Although this study is based on limited cases, it suggests that the subgrid variations of Nc and its correlation with qc both need to be considered for an accurate simulation of the autoconversion process in GCMs.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

An adaptive pseudospectral method for discontinuous problems

The accuracy of adaptively chosen, mapped polynomial approximations is studied for functions with steep gradients or discontinuities. It is shown that, for steep gradient functions, one can obtain spectral accuracy in the original coordinate system by using polynomial approximations in a transformed coordinate system with substantially fewer collocation points than are necessary using polynomial expansion directly in the original, physical, coordinate system. It is also shown that one can avoid the usual Gibbs oscillation associated with steep gradient solutions of hyperbolic pde's by approximation in suitably chosen coordinate systems. Continuous, high gradient solutions are computed with spectral accuracy (as measured in the physical coordinate system). Discontinuous solutions associated with nonlinear hyperbolic equations can be accurately computed by using an artificial viscosity chosen to smooth out the solution in the mapped, computational domain. Thus, shocks can be effectively resolved on a scale that is subgrid to the resolution available with collocation only in the physical domain. Examples with Fourier and Chebyshev collocation are given.

Augenbaum, Jeffrey M.↗
NASA NTRS1989

An adaptive pseudospectral method for discontinuous problems

The accuracy of adaptively chosen, mapped polynomial approximations is studied for functions with steep gradients or discontinuities. It is shown that, for steep gradient functions, one can obtain spectral accuracy in the original coordinate system by using polynomial approximations in a transformed coordinate system with substantially fewer collocation points than are necessary using polynomial expansion directly in the original, physical, coordinate system. It is also shown that one can avoid the usual Gibbs oscillation associated with steep gradient solutions of hyperbolic pde's by approximation in suitably chosen coordinate systems. Continuous, high gradient solutions are computed with spectral accuracy (as measured in the physical coordinate system). Discontinuous solutions associated with nonlinear hyperbolic equations can be accurately computed by using an artificial viscosity chosen to smooth out the solution in the mapped, computational domain. Thus, shocks can be effectively resolved on a scale that is subgrid to the resolution available with collocation only in the physical domain. Examples with Fourier and Chebyshev collocation are given.

Augenbaum, J. M.↗
NASA NTRS1996

Parallel Simulation of Unsteady Turbulent Flames

Time-accurate simulation of turbulent flames in high Reynolds number flows is a challenging task since both fluid dynamics and combustion must be modeled accurately. To numerically simulate this phenomenon, very large computer resources (both time and memory) are required. Although current vector supercomputers are capable of providing adequate resources for simulations of this nature, the high cost and their limited availability, makes practical use of such machines less than satisfactory. At the same time, the explicit time integration algorithms used in unsteady flow simulations often possess a very high degree of parallelism, making them very amenable to efficient implementation on large-scale parallel computers. Under these circumstances, distributed memory parallel computers offer an excellent near-term solution for greatly increased computational speed and memory, at a cost that may render the unsteady simulations of the type discussed above more feasible and affordable.This paper discusses the study of unsteady turbulent flames using a simulation algorithm that is capable of retaining high parallel efficiency on distributed memory parallel architectures. Numerical studies are carried out using large-eddy simulation (LES). In LES, the scales larger than the grid are computed using a time- and space-accurate scheme, while the unresolved small scales are modeled using eddy viscosity based subgrid models. This is acceptable for the moment/energy closure since the small scales primarily provide a dissipative mechanism for the energy transferred from the large scales. However, for combustion to occur, the species must first undergo mixing at the small scales and then come into molecular contact. Therefore, global models cannot be used. Recently, a new model for turbulent combustion was developed, in which the combustion is modeled, within the subgrid (small-scales) using a methodology that simulates the mixing and the molecular transport and the chemical kinetics within each LES grid cell. Finite-rate kinetics can be included without any closure and this approach actually provides a means to predict the turbulent rates and the turbulent flame speed. The subgrid combustion model requires resolution of the local time scales associated with small-scale mixing, molecular diffusion and chemical kinetics and, therefore, within each grid cell, a significant amount of computations must be carried out before the large-scale (LES resolved) effects are incorporated. Therefore, this approach is uniquely suited for parallel processing and has been implemented on various systems such as: Intel Paragon, IBM SP-2, Cray T3D and SGI Power Challenge (PC) using the system independent Message Passing Interface (MPI) compiler. In this paper, timing data on these machines is reported along with some characteristic results.

Menon, Suresh↗
NASA NTRS2011

Large Eddy Simulation Study for Fluid Disintegration and Mixing

A new modeling approach is based on the concept of large eddy simulation (LES) within which the large scales are computed and the small scales are modeled. The new approach is expected to retain the fidelity of the physics while also being computationally efficient. Typically, only models for the small-scale fluxes of momentum, species, and enthalpy are used to reintroduce in the simulation the physics lost because the computation only resolves the large scales. These models are called subgrid (SGS) models because they operate at a scale smaller than the LES grid. In a previous study of thermodynamically supercritical fluid disintegration and mixing, additional small-scale terms, one in the momentum and one in the energy conservation equations, were identified as requiring modeling. These additional terms were due to the tight coupling between dynamics and real-gas thermodynamics. It was inferred that if these terms would not be modeled, the high density-gradient magnitude regions, experimentally identified as a characteristic feature of these flows, would not be accurately predicted without the additional term in the momentum equation; these high density-gradient magnitude regions were experimentally shown to redistribute turbulence in the flow. And it was also inferred that without the additional term in the energy equation, the heat flux magnitude could not be accurately predicted; the heat flux to the wall of combustion devices is a crucial quantity that determined necessary wall material properties. The present work involves situations where only the term in the momentum equation is important. Without this additional term in the momentum equation, neither the SGS-flux constant-coefficient Smagorinsky model nor the SGS-flux constant-coefficient Gradient model could reproduce in LES the pressure field or the high density-gradient magnitude regions; the SGS-flux constant- coefficient Scale-Similarity model was the most successful in this endeavor although not totally satisfactory. With a model for the additional term in the momentum equation, the predictions of the constant-coefficient Smagorinsky and constant-coefficient Scale-Similarity models were improved to a certain extent; however, most of the improvement was obtained for the Gradient model. The previously derived model and a newly developed model for the additional term in the momentum equation were both tested, with the new model proving even more successful than the previous model at reproducing the high density-gradient magnitude regions. Several dynamic SGS-flux models, in which the SGS-flux model coefficient is computed as part of the simulation, were tested in conjunction with the new model for this additional term in the momentum equation. The most successful dynamic model was a "mixed" model combining the Smagorinsky and Gradient models. This work is directly applicable to simulations of gas turbine engines (aeronautics) and rocket engines (astronautics).

Bellan, Josette↗
NASA NTRS2025

Describing Seasonal Mixtures of Cloud Regimes Via “Regimes of Regimes”

We propose a new type of cloud classification, relevant to monthly or longer time scales, but which inherently still encompasses cloud subgrid variability information at ~100 km scales. Our proposed classification partitions frequencies of occurrence over these scales of previously defined cloud regimes (CRs). We call the resulting distinct cloud entities regimes of regimes (RORs). While the CRs have been previously shown to successfully classify daily mesoscale subgrid variability via distributions of cloud fraction within distinct combinations of cloud top pressure and cloud optical thickness, the RORs essentially represent the prevalent seasonal mixtures of these CRs. RORs thus embody the seasonal cloudiness of a mesoscale region. We show that each ROR can still be associated with more traditional cloud classifications via composites of coincident active (lidar and cloud radar) cloud views. In a first application that gauges the potential utility of RORs, we pair them with CERES EBAF radiative fluxes to gain insight into recent trends of the cloud radiative effect. The ROR corresponding to an environment of shallow convection stands out in this analysis largely because of its declining population. Our study demonstrates the potential of RORs to categorize globally mesoscale cloudiness at monthly/seasonal scales and to serve as proxies of different atmospheric states at these scales.

Nayeong Cho↗
DOE OSTI2024

Assessing the Atmospheric Response to Subgrid Surface Heterogeneity in the Single-Column Community Earth System Model, Version 2 (CESM2)

Land-atmosphere interactions are central to the evolution of the atmospheric boundary layer and the subsequent formation of clouds and precipitation. Existing global climate models represent these connections with bulk approximations on coarse spatial scales, but observations suggest that small-scale variations in surface characteristics and co-located turbulent and momentum fluxes can significantly impact the atmosphere. Recent model development efforts have attempted to capture this phenomenon by coupling existing representations of subgrid-scale (SGS) heterogeneity between land and atmosphere models. Such approaches are in their infancy and it is not yet clear if they can produce a realistic atmospheric response to surface heterogeneity. Here, we implement a parameterization to capture the effects of SGS heterogeneity in the Community Earth System Model (CESM2), and compare single-column simulations against high-resolution Weather Research and Forecasting (WRF) large-eddy simulations (LESs), which we use as a proxy for observations. The CESM2 experiments increase the temperature and humidity variances in the lowest atmospheric levels, but the response is weaker than in WRF-LES. In part, this is attributed to an underestimate of surface heterogeneity in the land model due to a lack of SGS meteorology, a separation between deep and shallow convection schemes in the atmosphere, and a lack of explicitly represented mesoscale secondary circulations. These results highlight the complex processes involved in capturing the effects of SGS heterogeneity and suggest the need for parameterizations that communicate their influence not only at the surface but also vertically.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Dynamic Subgrid Turbulence Modeling for Shallow Cumulus Convection Simulations beyond LES Resolutions

A scale-dependent dynamic Smagorinsky model is implemented in the Met Office/NERC Cloud (MONC) model using two averaging flavors, along Lagrangian pathlines and local moving averages. The dynamic approaches were compared against the conventional Smagorinsky–Lilly scheme in simulating the diurnal cycle of shallow cumulus convection. The simulations spanned from the LES to the near-gray-zone and gray-zone resolutions and revealed the adaptability of the dynamic model across the scales and different stability regimes. The dynamic model can produce a scale- and stability-dependent profile of the subfilter turbulence length scale across the chosen resolution range. At gray-zone resolutions the adaptive length scales can better represent the early precloud boundary layer leading to temperature and moisture profiles closer to the LES compared to the standard Smagorinsky. As a result, the initialization and general representation of the cloud field in the dynamic model is in good agreement with the LES. In contrast, the standard Smagorinsky produces a less well-mixed boundary layer, which fails to ventilate moisture from the boundary layer, resulting in the delayed spinup of the cloud layer. Moreover, strong downgradient diffusion controls the turbulent transport of scalars in the cloud layer. However, the dynamic approaches rely on the resolved field to account for nonlocal transports, leading to overenergetic structures when the boundary layer is fully developed and the Lagrangian model is used. Introducing the local averaging version of the model or adopting a new Lagrangian time scale provides stronger dissipation without significantly affecting model behavior.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Deep Learning Parameterization of Vertical Wind Velocity Variability via Constrained Adversarial Training

Atmospheric models with typical resolution in the tenths of kilometers cannot resolve the dynamics of air parcel ascent, which varies on scales ranging from tens to hundreds of meters. Small-scale wind fluctuations are thus characterized by a subgrid distribution of vertical wind velocity W with standard deviation σ W . The parameterization of σ W is fundamental to the representation of aerosol–cloud interactions, yet it is poorly constrained. Using a novel deep learning technique, this work develops a new parameterization for σ W merging data from global storm-resolving model simulations, high-frequency retrievals of W , and climate reanalysis products. The parameterization reproduces the observed statistics of σ W and leverages learned physical relations from the model simulations to guide extrapolation beyond the observed domain. Incorporating observational data during the training phase was found to be critical for its performance. The parameterization can be applied online within large-scale atmospheric models, or offline using output from weather forecasting and reanalysis products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

More Heavy Precipitation in World Urban Regions Captured Through a Two‐Way Subgrid Land‐Atmosphere Coupling Framework in the NCAR CESM2

Abstract Current global climate models (GCMs), limited to grid‐scale land‐atmosphere coupling, cannot represent subgrid urban‐rural precipitation contrasts. This study develops an innovative two‐way subgrid land‐atmosphere coupling framework in the National Center for Atmospheric Research (NCAR) Community Earth System Model version 2 (CESM2) to explicitly resolve land‐atmosphere interaction over subgrid individual land units. Results show that urban heat island (UHI) leads to the urban rainfall effect (URE), which in turn alleviates overestimated UHI over China in CESM2. The URE manifests as a shift toward more heavy precipitation and less light precipitation in world urban areas than in surrounding rural counterparts. This feature is consistent with available observations. In heavy precipitation situations, the UHI promotes atmospheric instability and enhances atmospheric water vapor holding capacity, resulting in more heavy precipitation in urban areas. Conversely, in light precipitation situations, the UHI and decreased evaporation from urban impermeable surfaces diminish atmospheric relative humidity, suppressing light precipitation.

Geology↗
DOE OSTI2024

A Study of Intermittent Turbulence in Stable Arctic Boundary Layers

Abstract Polar boundary layers are difficult to model due to the existence of intermittent turbulence within stable layers. Here we present a case study evaluation of coherent structures in a stable boundary layer observed during a series of flights with an uncrewed aircraft system (DataHawk2) on 19 October 2016 at Oliktok Point, Alaska as part of the ERASMUS (Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems) field campaign. During a sequence of five flights over a nine-hour period, 57 profiles of atmospheric properties (0–400 m a.g.l) were collected. Turbulence was identified using derived Richardson Number, temperature structure function parameter, and turbulence kinetic energy dissipation. Throughout all flights on this strongly stable day, intermittent turbulence was observed. These turbulent layers showed well-mixed potential temperature profiles embedded within otherwise stable potential temperature profiles; often resulting in a characteristic staircase pattern. Turbulent layers ranged from 1 to 30 m deep, with most individual layers being 1–2 m deep. Vertical propagation velocities of layers in the lower atmosphere were on the order of a few cm s −1 , typical of non-convective environments. In different regions of the profile, turbulence was driven by a different balance of buoyancy and shear forces, with turbulence in the near surface environment driven by strong shear forces overcoming strong resistance to buoyancy, while turbulence in elevated layers characterized by weaker shear forces overcoming weaker resistance to buoyancy. We discuss the potential of such datasets for improving subgrid parameterizations of small-scale turbulence embedded within stable boundary layers.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1996

Analysis of Subgrid Eddy Diffusivity in Turbulence Using Direct Numerical Simulation Databases

Direct numerical simulation data in isotropic turbulence at Taylor-scale Reynolds number 90 are used to compute subgrid transfer and spectral eddy diffusivities for passive scalars at Schmidt numbers 1 and 1/8. The results are consistent with spectral transfer processes dominated by a local forward cascade in wavenumber space which is a consequence of moderately nonlocal interactions in the scalar fields. Data decompositions show that resolvable-subgrid interactions make (in general) substantially stronger contributions than fully-subgrid interactions to the eddy diffusivity, which has a non-negligible inverse cascade, or backscatter, component. The eddy diffusivity has a strong cusp at wavenumbers close to the cutoff value separating resolvable and subgrid ranges. At low wavenumbers the eddy diffusivity is generally small, but there the details depend on Schmidt number. The behavior of the subgrid turbulent Schmidt number (the ratio of effective eddy viscosity to eddy diffusivity) is observed to depend strongly on Schmidt number. In interpreting the results at a given spectral cutoff it is important to note that the spectrum of less diffusive scalars (of higher Schmidt number) has more high-wavenumber content.

Yeung, P. K.↗
DOE OSTI2023

Modeling Land-Atmosphere Coupling at Cloud-Resolving Scale Within the Multiple Atmosphere Multiple Land (MAML) Framework in SP-E3SM

Representing subgrid variabilities of land surface processes and their upscaled effects is crucial for global climate modeling. Here, we implement a Multiple Atmosphere Multiple Land (MAML) framework in the superparamaterized version of E3SM (SP32 E3SM) to explicitly simulate the subgrid variabilities of land states and fluxes at cloud-resolving scale and their interactions with atmosphere. Comparing to the standard SP-E3SM in which all the atmospheric columns of the cloud resolving model embedded within the global atmospheric model grid interact with the same land surface (i.e., Multiple Atmosphere Single Land (MASL)), the impact of MAML on the strength of land-atmosphere coupling is limited, partly because the current implementation mainly facilitates one-way coupling between the cloud-resolving model and the land surface model. Despite such limitation, MAML increases the surface latent heat flux at the expense of sensible heat flux, and increases precipitation in India, Amazon, and Central Africa, reducing the model dry bias compared to the standard SP-E3SM. By employing a normalized gross moist stability (NGMS) diagnostic framework, we find that the increase in precipitation minus evaporation (PE) is primarily driven by the change in large-scale moisture convergence, particularly by the increase of water vapor in the lower atmosphere, while the local effect of total surface energy flux plays a minor role in the P-E change. More specifically, MAML changes the surface energy partitioning (evaporative fraction), increases the atmosphere water vapor, and further increases P-E by decreasing the NGMS. Finally, future development in the MAML framework is discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Consistent Representation of Cloud Overlap and Cloud Subgrid Vertical Heterogeneity

Many global climate models underestimate the cloud cover and overestimate the cloud albedo, especially for low-level clouds. We determine how a correct representation of the vertical structure of clouds can fix part of this bias. We use the 1D McICA framework and focus on low-level clouds. Using Large Eddy Simulations results as reference, we propose a method based on exponential-random overlap that represents the cloud overlap between layers and the subgrid cloud properties over several vertical scales, with a single value of the overlap parameter. Starting from a coarse vertical grid, representative of atmospheric models, this algorithm is used to generate the vertical profile of the cloud fraction with a finer vertical resolution, or to generate it on the coarse grid but with subgrid heterogeneity and cloud overlap that ensures a correct cloud cover. Doing so we find decorrelation lengths are dependent on the vertical resolution, except if the vertical subgrid heterogeneity and interlayer overlap are taken into account coherently. We confirm that the frequently used maximum-random overlap leads to a significant error by underestimating the low-level cloud cover with a relative error of about 50%, that can lead to an error of SW cloud albedo as big as 70%. Not taking into account the subgrid vertical heterogeneity of clouds can cause a relative error of 20% in brightness, assuming the cloud cover is correct.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Reducing impacts of artificial ponding in modeling salt marshes using a conductivity-formulated subgrid model

The landforms of salt marsh systems are rather complex, with meandering channel networks cutting through low-lying, extensive marsh platforms. Some small-scale topographic details are critical to flooding and draining processes but cannot be reflected in the Digital Elevation Model (DEM) due to limited measurement resolution and vegetation bias. Numerical models need a grid with high enough resolution to capture the small-scale connectivity to correctly model the small-scale flow processes, making the model computationally unaffordable. Here, in this study, we derived a subgrid model, which couples two flow components, one is the regular subgrid model for simulating the subgrid-resolved flows, and the other is a conductivity-formulated porous flow model for modeling small-scale gut flows unresolved at the subgrid level. The model validation was performed using an idealized case with a narrow slot that was unresolved in the coupled flow model. Model results were compared with a slot-resolved regular subgrid model where only surface flows are solved and suggested that, with a proper model parameterization, the coupled flow model is capable of reproducing flooding and draining processes similar to the slot-resolved subgrid model of surface flow. The model was applied to simulating flooding and draining processes in a meso-tidal salt marsh. The model results demonstrate that the coupled subgrid model can be used to reduce the impacts of artificial ponding that usually occur in numerical simulations of salt marshes with numerous narrow gullies and creeks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Navigating the Noise: Bringing Clarity to ML Parameterization Design With O $\boldsymbol{\mathcal{O}}$(100) Ensembles

Abstract Machine‐learning (ML) parameterizations of subgrid processes (here of turbulence, convection, and radiation) may one day replace conventional parameterizations by emulating high‐resolution physics without the cost of explicit simulation. However, uncertainty about the relationship between offline and online performance (i.e., when integrated with a large‐scale general circulation model) hinders their development. Much of this uncertainty stems from limited sampling of the noisy, emergent effects of upstream ML design decisions on downstream online hybrid simulation. Our work rectifies the sampling issue via the construction of a semi‐automated, end‐to‐end pipeline for size ensembles of hybrid simulations, revealing important nuances in how systematic reductions in offline error manifest in changes to online error and online stability. For example, removing dropout and switching from a Mean Squared Error to a Mean Absolute Error loss both reduce offline error, but they have opposite effects on online error and online stability. Other design decisions, like incorporating memory, converting moisture input from specific humidity to relative humidity, using batch normalization, and training on multiple climates do not come with any such compromises. Finally, we show that ensemble sizes of may be necessary to reliably detect causally relevant differences online. By enabling rapid online experimentation at scale, we can empirically settle debates regarding subgrid ML parameterization design that would have otherwise remained unresolved in the noise.

Lin, Jerry [Department of Earth System Sciences Un↗
NASA NTRSDate not supplied

Reconstructing Subgrid Cloud Variability Guided by CloudSat/CALIPSO Observations

Predicting realistic cloud subgrid variability remains a challenge for Global Climate Models (GCMs) even though it can play an important role for proper representation of processes pertaining to cloud microphysics, precipitation, and radiation, but also for comparisons with satellite observations which are of much higher resolution than model grids. The diagnostic approach of subgrid cloud variability is commonly handled by subcolumn cloud generators. For a specific GCM, one ideally wants the subgrid variability used for comparisons with satellite observations to be created by the same generator and with the same rules as the one used for model integration. With this in mind, we have embarked in an effort to test and improve cloud subcolumn generators appropriate for GCMs. For this purpose, we use cloud (hydrometeor) products from active observations by the CloudSat radar (CPR) and the CALIPSO lidar (CALIOP). Cloud products from active sensors while suffering significant sampling and coverage drawbacks have the advantage of resolving both horizontal and vertical variability. The main question is: given a profile of cloud condensate mean and variance, can we create a subgrid cloud field that is statistically similar to the observed subgrid cloud field? By “statistically”, we suggest that we do not aspire to reproduce “well” each individual subgrid cloud field of a GCM-scale region, but that our generator performs well for a large ensemble of cases. We simulate radar, passive imager, and radiation flux fields from the observed 2D cloud fields and create one-point statistics; we use the profiles of cloud condensate mean and variance as input to the generator to create subgrid cloud fields; we compare the statistics; we adjust the rules of the generator to create the best possible agreement between the radar, imager and radiation field statistics. In this process, the active observations have actually a dual role: they provide the actual subgrid cloud field which can be reduced to a profile of mean and variance used by the subcolumn generator, but they also provide the rules needed by the generator, such as measures (e.g, decorrelation length) of the vertical overlap of cloud fraction and of the condensate horizontal variability. This presentation will show our progress using Cloudsat and CALIPSO products in this dual fashion.

cloud↗
NASA NTRSDate not supplied

Reconstructing Subgrid Cloud Variability Guided by CloudSat/CALIPSO Observations

Predicting realistic cloud subgrid variability remains a challenge for Global Climate Models (GCMs) even though it can play an important role for proper representation of processes pertaining to cloud microphysics, precipitation, and radiation, but also for comparisons with satellite observations which are of much higher resolution than model grids. The diagnostic approach of subgrid cloud variability is commonly handled by subcolumn cloud generators. For a specific GCM, one ideally wants the subgrid variability used for comparisons with satellite observations to be created by the same generator and with the same rules as the one used for model integration. With this in mind, we have embarked in an effort to test and improve cloud subcolumn generators appropriate for GCMs. For this purpose, we use cloud (hydrometeor) products from active observations by the CloudSat radar (CPR) and the CALIPSO lidar (CALIOP). Cloud products from active sensors while suffering signi􀂦cant sampling and coverage drawbacks have the advantage of resolving both horizontal and vertical variability. The main question is: given a profile of cloud condensate mean and variance, can we create a subgrid cloud field that is statistically similar to the observed subgrid cloud field? By “statistically”, we suggest that we do not aspire to reproduce “well” each individual subgrid cloud field of a GCM-scale region, but that our generator performs well for a large ensemble of cases. We simulate radar, passive imager, and radiation flux fields from the observed 2D cloud fields and create one-point statistics; we use the profiles of cloud condensate mean and variance as input to the generator to create subgrid cloud fields; we compare the statistics; we adjust the rules of the generator to create the best possible agreement between the radar, imager and radiation field statistics. In this process, the active observations have actually a dual role: they provide the actual subgrid cloud field which can be reduced to a profile of mean and variance used by the subcolumn generator, but they also provide the rules needed by the generator, such as measures (e.g, decorrelation length) of the vertical overlap of cloud fraction and of the condensate horizontal variability. This presentation will show our progress using Cloudsat and CALIPSO products in this dual fashion.

clouds↗