Navier-Stokes solutions for vortical flows over a tangent-ogive cylinder
Explore the source record for details and available documents.
Hartwich, PETER-M.↗
SEARCH · Engineering Papers
Results for “Stokes flow”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Solution of the parabolized Navier-Stokes equations for supersonic flows by a fully implicit method with an analysis of departure solution behavior
Explore the source record for details and available documents.
Barnett, Mark↗
Navier-Stokes calculation of transonic flow past the NTF 65 deg delta wing
Models of four delta wings were built and tested in the 8 x 8 ft Transonic Wind Tunnel at LaRC. The wings are identical in planform shape with a swept-back angle of 65 degrees, but bear different leading edge profiles. The models were tested under pressurized and cryogenic conditions to simulate true flight Reynolds numbers. Data on the aerodynamic forces and pressure distributions at various locations on the wings were taken at various flight Mach numbers and angles of attack. Effects of high Reynolds number and leading edge radius on the aerodynamic characteristics of the wings are being accessed. To thoroughly understand the turbulent, vortical flow around the wings, an effort to perform computational aerodynamic analysis is being made. The objective of the analysis is to supplement and validate the experimental data and explain the high Reynolds number and leading edge effects. GRIDGEN, a software developed by General Dynamics, is being used to generate the grid topology for the flow field around the wings. The flow solver to be used is CFL3D, a computation fluid dynamics code developed at LaRC. Based on the geometric description of the wings, a FORTRAN program called WINGSURF was written to generate the databases defining the surface geometry of the wings. To match the true geometry of the models in the wind tunnel for realistic comparison with experimental results, databases defining the sting support for the wing models were also created by two other FORTRAN programs, STINJOIN and STINREAR. Listing of the programs are attached and the geometry of a typical wing model with the sting support is shown. Other aspects of the investigation are discussed.
Wu, Chivey C.↗
An implicit Navier-Stokes code for turbulent flow modeling
This paper presents a numerical approach to calculating turbulent flows employing advanced turbulence models. The main features include a line-by-line Gauss-Seidel algorithm using Roe's approximate Riemann solver, TVD numerical schemes, implicit boundary conditions and a decoupled turbulence-model solver. Based on the problems tested so far, the method has consistently demonstrated its ability in offering accuracy, boundedness and a fast rate of convergence to steady-state solution.
Huang, P. G.↗
Simulation of separated flow past a bluff body using Navier-Stokes equations
Two-dimensional flow past a bluff body is presently simulated on the basis of an analysis that employs the incompressible, unsteady Navier-Stokes equations in terms of vorticity and stream function. The fully implicit, time-marching, alternating-direction, implicit-block Gaussian elimination used is a direct method with second-order spatial accuracy; this allows it to avoid the introduction of any artificial viscosity. Attention is given to the simulation of flow past a circular cylinder with and without symmetry, requiring the use of either the half or the full cylinder, respectively.
Ghia, K. N.↗
Supersonic Navier-Stokes simulations of turbulent afterbody flows
Four numerical algorithms and three turbulence models are used to solve the thin layer three-dimensional Reynolds-averaged Navier-Stokes equations for the supersonic flow past a nonaxisymmetric nozzle. The four numerical algorithms evaluated are based on upwind differencing and feature time-dependent, space relaxation, and parabolized schemes. The three different algebraic turbulence models are the Baldwin-Lomax (1978), the nonequilibrium model of Johnson and King (1985), and the Goldberg (1989) modification for the separated flow region. The present investigation was conducted at freestream Mach numbers of 1.2 and 1.3 and at an angle of attack of 0.0 deg. The Reynolds numbers for the investigation ranged from 20.5 million to 21.5 million, based on the model length. The calculations are compared with experimental data.
Abdol-Hamid, Khaled S.↗
Calculation of steady and oscillating airfoil flow fields via the Navier Stokes equations
A Navier-Stokes calculation procedure is applied to high Reynolds number flow about steady and unsteady airfoils. The procedure solves the ensemble averaged governing equations via a linearized block implicit (LBI) technique which in general converges to a nominal steady flow within 120 time steps. The grid used in the computation is highly stretched thus resolving the turbulent boundary layers. Calculations have been compared with data for both NACA 4412 airfoil at high incidence and an NACA 0012 airfoil oscillating in dynamic stall. In both cases, good agreement is noted between measured and calculated surface pressure distributions.
Shamroth, S. J.↗
Bypass Transitional Flow Calculations Using a Navier-Stokes Solver and Two-Equation Models
Bypass transitional flows over a flat plate were simulated using a Navier-Stokes solver and two equation models. A new model for the bypass transition, which occurs in cases with high free stream turbulence intensity (TI), is described. The new transition model is developed by including an intermittency correction function to an existing two-equation turbulence model. The advantages of using Navier-Stokes equations, as opposed to boundary-layer equations, in bypass transition simulations are also illustrated. The results for two test flows over a flat plate with different levels of free stream turbulence intensity are reported. Comparisons with the experimental measurements show that the new model can capture very well both the onset and the length of bypass transition.
Liuo, William W.↗
A multi-domain spectral computation of three-dimensional laminar horseshoe vortex flow using incompressible Navier-Stokes equations
Multidomain spectral methods are presently used to numerically simulate a strut-wall intersection's laminar horseshoe vortex flow through direct solution of the three-dimensional, incompressible, time-dependent Navier-Stokes equations. Direct expansion in Chebyshev polynomials and spectral element method spatial discretization of flow dependence are used to achieve high-order accuracy, and minimal dispersion errors. Low and moderate Reynolds number results are presented to illustrate the method application.
Tan, C. S.↗
Numerical prediction of transition of the F-16 wing at supersonic speeds
A parametric study is being conducted as an effort to numerically predict the extent of natural laminar flow (NLF) on finite swept wings at supersonic speeds. This study is one aspect of a High Speed Research Program (HSRP) to gain an understanding of the technical requirements for high-speed aircraft flight. The parameters that are being addressed in this study are Reynolds number, angle of attack, and leading-edge wing sweep. These parameters were analyzed through the use of an advanced Computational Fluid Dynamics (CFD) flow solver, specifically the ARC 3-D Compressible Navier-Stokes (CNS) flow solver. From the CNS code, pressure coefficients (Cp) are obtained for the various cases. These Cp's are then used to compute the boundary-layer profiles through the use of the 'Kaups and Cebeci' compressible 2-D boundary layer code. Finally, the boundary-layer parameters are processed into a 3-D compressible boundary layer stability code (COSAL) to predict transition. The parametric study then consisted of four geometries which addressed the effects of sweep, and three angles of attack from zero to ten degrees to yield a total of 12 cases. The above process was substantially automated through a procedure that was developed by the work conducted under this study. This automation procedure then yields a 3-D graphical measure of the extent of laminar flow by predicting the transition location of laminar to turbulent flow.
Cummings, Russell M.↗
Numerical solution of the Navier-Stokes equations for super-sonic flows with strong shocks
The numerical solution of the full Navier-Stokes Equations for viscous flows with high Mach numbers and a strong detached bow shock was obtained. Two dimensional flows around a circular cylinder, and a circular cylinder with an aft-body in the form of a fairing, were considered. The solution of the compressible N.S. equations was accomplished by the method of finite differences. An implicit scheme of solution, the S.O.R., was used with the optimum acceleration parameters determined by trial and error. The tensor notation was used in writing the N-S Equations transformed into general curvilinear coordinates. The equations for the generation of the coordinate system were solved, followed by the solution of the N.S. equations, at the end of a set of given number of time steps. "Wiggles", constituted the one major problem that needed to be overcome. These oscillations give rise to quantities such as negative temperatures, which ultimately caused the computational program to break down. Certain dissipative finite-difference schemes damped these oscillations.
Devarayalu, K.↗
Time-asymptotic solutions of the Navier-Stokes equation for free shear flows using an alternating-direction implicit method
An uncoupled time asymptotic alternating direction implicit method for solving the Navier-Stokes equations was tested on two laminar parallel mixing flows. A constant total temperature was assumed in order to eliminate the need to solve the full energy equation; consequently, static temperature was evaluated by using algebraic relationship. For the mixing of two supersonic streams at a Reynolds number of 1,000, convergent solutions were obtained for a time step 5 times the maximum allowable size for an explicit method. The solution diverged for a time step 10 times the explicit limit. Improved convergence was obtained when upwind differencing was used for convective terms. Larger time steps were not possible with either upwind differencing or the diagonally dominant scheme. Artificial viscosity was added to the continuity equation in order to eliminate divergence for the mixing of a subsonic stream with a supersonic stream at a Reynolds number of 1,000.
Rudy, D. H.↗
A viscous-inviscid interaction method for 2-D unsteady, compressible flows
A Navier-Stokes/potentia/flow interactive solution method suitable for the solution of steady-state and unsteady flowfields around airfoils has been developed. The Navier-Stokes equations are solved in the close proximity of an airfoil and in its wake. The inviscid flowfield surrounding the viscous flow regions is assumed to be irrotational and isentropic. In the inviscid flow region, the potential flow equations, which are based on distributed sources and vortices, are solved. The two solutions are strongly coupled through the application of their boundary conditions. The strongly coupled Navier-Stokes/potential flow interactive solution method confines computations to a small domain in the proximity of an airfoil. For steady flow solutions, the computational domain may be confined to a region which extends less than one-fifth of a chord length distance away from the airfoil surface. Computed solutions have the same accuracy as the full domain NavierStokes solutions. Yet, as a result of the significantly reduced computational domain and increased convergence rates, the Navier-Stokes/potential flow interactive solution method is about 40 percent more efficient computationally.
Tuncer, Ismail H.↗
Direct simulation Monte Carlo and Navier-Stokes simulations of blunt body wake flows
Numerical results obtained with direct simulation Monte Carlo and Navier-Stokes methods are presented for a Mach-20 nitrogen flow about a 70-deg blunted cone. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are considered with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is on the wake structure: how the wake structure changes as a function of rare faction, what the afterbody levels of heating are, and to what limits the continuum models are realistic as rarefunction in the wake is progressively increased. Calculations are made with and without an afterbody sting. Results for the afterbody sting are emphasized in anticipation of an experimental study for the current flow conditions and model configuration. The Navier-Stokes calculations were made with and without slip boundary conditions. Comparisons of the results obtained with the two simulation methodologies are made for both flowfield structure and surface quantities.
WAKE STRUCTURE↗
Direct simulation Monte Carlo and Navier-Stokes simulations of blunt body wake flows
Numerical results obtained with direct simulation Monte Carlo and Navier-Stokes methods are presented for a Mach-20 nitrogen flow about a 70-deg blunted cone. The flow conditions simuulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are considered with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is on the wake structure: how the wake structure changes as a function of rarefaction, what the afterbody levels of heating are, and to what limits the continuum models are realistic as rarefaction in the wake is progressively increased. Calculations are made with and without an afterbody sting. Results for the after body sting are emphasizes in anticipation of an experimental study for the current flow conditions and model configuration. The Navier-Stokes calculations were made with and without slip boundary conditions. Comparisons of the results obtained with the two simulation methodologies are made for both flowfield structure and surface quantities.
Moss, James N.↗
Numerical Prediction Methods (Reynolds-Averaged Navier-Stokes Simulations of Transonic Separated Flows)
During the past five years, numerous pioneering archival publications have appeared that have presented computer solutions of the mass-weighted, time-averaged Navier-Stokes equations for transonic problems pertinent to the aircraft industry. These solutions have been pathfinders of developments that could evolve into a major new technological capability, namely the computational Navier-Stokes technology, for the aircraft industry. So far these simulations have demonstrated that computational techniques, and computer capabilities have advanced to the point where it is possible to solve forms of the Navier-Stokes equations for transonic research problems. At present there are two major shortcomings of the technology: limited computer speed and memory, and difficulties in turbulence modelling and in computation of complex three-dimensional geometries. These limitations and difficulties are the pacing items of the continuing developments, although the one item that will most likely turn out to be the most crucial to the progress of this technology is turbulence modelling. The objective of this presentation is to discuss the state of the art of this technology and suggest possible future areas of research. We now discuss some of the flow conditions for which the Navier-Stokes equations appear to be required. On an airfoil there are four different types of interaction of a shock wave with a boundary layer: (1) shock-boundary-layer interaction with no separation, (2) shock-induced turbulent separation with immediate reattachment (we refer to this as a shock-induced separation bubble), (3) shock-induced turbulent separation without reattachment, and (4) shock-induced separation bubble with trailing edge separation.
Mehta, Unmeel↗
Prediction of asymmetric vortical flows around slender bodies using Navier-Stokes equations
Steady and unsteady asymmetric vortical flows around slender bodies at high angles of attack are solved using the unsteady, compressible, thin-layer Navier-Stokes equations. An implicit, upwind-biased, flux-difference splitting, finite-volume scheme is used for the numerical computations. For supersonic flows past point cones, the locally conical flow assumption have been used for efficient computational studies of this phenomenon. Asymmetric flows past a 5-deg semiapex-angle circular cone at different angles of attack, free-stream Mach numbers, and Reynolds numbers have been studied in responses to different sources of disturbances. The effects of grid fineness and computational domain size have also been investigated. Next, the responses of three-dimensional supersonic asymmetric flow around a 5-deg circular cone at different angles of attack and Reynolds numbers to short-duration sideslip disturbances are presented. The results show that flow asymmetry becomes stronger as the Reynolds number and angles of attack are increased. One of the cases of flow over a cone-cylinder configuration is validated fairly well by experimental data.
Liu, C. H.↗
A survey of computational aerodynamics in the United States
Programs in theoretical and computational aerodynamics in the United States are described. Those aspects of programs that relate to aeronautics are detailed. The role of analysis at various levels of sophistication is discussed as well as the inverse solution techniques that are of primary importance in design methodology. The research is divided into the broad categories of application for boundary layer flow, Navier-Stokes turbulence modeling, internal flows, two-dimensional configurations, subsonic and supersonic aircraft, transonic aircraft, and the space shuttle. A survey of representative work in each area is presented.
Gessow, A.↗