Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stacking faults”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The effects of defects on copper melting under hydrostatic and shock loading

With molecular dynamics (MD) simulations, we investigate the effects of defects on Cu melting under hydrostatic and shock wave loading. We explore preexistent defects including vacancies, stacking faults and grain boundaries, as well as shock-induced defects. Depending on defect characteristics (energy and concentration), defects may have negligible or considerable effects on melting at MD scales However, it is expected that defects have more pronounced effects at heating rates lower than the MD rates.

36 MATERIALS SCIENCE↗

Defects in nonpolar (134{sup ¯}0) ZnO epitaxial film grown on (114) LaAlO{sub 3} substrate

The defects in (134{sup ¯}0)ZnO epitaxial film grown on (114)LaAlO{sub 3} (LAO) have been systematically investigated by using transmission electron microscopy. At the ZnO/LAO interface, the Burgers vectors of misfit dislocations are identified to be 1/3[1{sup ¯}21{sup ¯}0] and 1/2[0001]. Threading dislocations with the Burgers vectors of 1/3〈112{sup ¯}0〉 and 〈0001〉 are distributed on the basal plane. In (134{sup ¯}0)ZnO film, the predominant planar defects are basal stacking faults (BSFs) with 1/6〈202{sup ¯}3〉 displacement vectors. The densities of dislocations and BSFs are about 3.8 × 10{sup 10} cm{sup −2} and 3.1 × 10{sup 5} cm{sup −1}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of Semipolar GaN Grown on a Si(100) Substrate

Semipolar GaN layers synthesized on a nanostructured Si(100) substrate are studied. It is shown that using a Si(100) nanoprofile combined with Si{sub x}N{sub y} nanostrips on top of nanostructures can yield, via metal-organic chemical-vapor deposition, GaN(10 1-bar 2) layers. An additional SiC buffer layer makes it possible to obtain GaN(10 1-bar 1) layers with a full-width at half-maximum of the diffraction-curve of ω{sub θ} ≈ 35′ arcmin. It is found that the luminescence properties of the semipolar layers are mostly due to basal plane stacking faults BSF{sub S}-I{sub 1}, in contrast to polar layers in which these properties are mostly due to the recombination of excitons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical and computational comparison of models for dislocation dissociation and stacking fault/core formation in fcc crystals

In this study, the purpose of the current work is the theoretical and computational comparison of selected models for the energetics of dislocation dissociation resulting in stacking fault and partial dislocation (core) formation in fcc crystals as based on the (generalized) Peierls–Nabarro (GPN: e.g., Xiang et al., 2008, Shen et al., 2014), and phase-field (PF: e.g., Shen and Wang, 2004, Hunter et al., 2011, Hunter et al., 2013, Mianroodi and Svendsen, 2015), methodologies (e.g., Wang and Li, 2010).

36 MATERIALS SCIENCE↗

A nanostructure thermal property measurement platform.

Measurements of the electrical and thermal transport properties of one-dimensional nanostructures (e.g., nanotubes and nanowires) typically are obtained without detailed knowledge of the specimen's atomic-scale structure or defects. To address this deficiency we have developed a microfabricated, chip-based characterization platform that enables both transmission electron microscopy (TEM) of atomic structure and defects as well as measurement of the thermal transport properties of individual nanostructures. The platform features a suspended heater line that contacts the center of a suspended nanostructure/nanowire that was placed using in-situ scanning electron microscope nanomanipulators. One key advantage of this platform is that it is possible to measure the thermal conductivity of both halves of the nanostructure (on each side of the central heater), and this feature permits identification of possible changes in thermal conductance along the wire and measurement of the thermal contact resistance. Suspension of the nanostructure across a through-hole enables TEM characterization of the atomic and defect structure (dislocations, stacking faults, etc.) of the test sample. As a model study, we report the use of this platform to measure the thermal conductivity and defect structure of GaN nanowires. The utilization of this platform for the measurements of other nanostructures will also be discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and magnetic properties of rare earth ruthenates, Ln{sub 5}Ru{sub 2}O{sub 12} (Ln=Pr, Nd, Sm-Tb)

Single crystals of Ln{sub 5}Ru{sub 2}O{sub 12} (Ln=Pr, Nd, Sm-Tb) were grown out of either NaOH or KOH fluxes in sealed silver tubes. The crystals of all the phases were observed to be twinned as confirmed by TEM studies. The series crystallize in the C2/m monoclinic system with lattice parameters, a=12.4049(4)-12.7621(6) A, b=5.8414(2)-5.9488(3) A, c=7.3489(2)-7.6424(4) A, beta=107.425(3)-107.432(2){sup o} and Z=2. The crystal structure is isotypic with the defect/disorder model of Ln{sub 5}Re{sub 2}O{sub 12} (Ln = Y, Gd) and consists of one dimensional edge shared RuO{sub 6} octahedral chains separated by a two dimensional LnO{sub x} polyhedral framework. Magnetic measurements indicate paramagnetic and antiferromagnetic behavior for Ln=Nd, Sm-Gd and Ln=Tb, respectively. - Graphical abstract: Single crystals of Ln{sub 5}Ru{sub 2}O{sub 12} (Ln=Pr, Nd, Sm-Tb) were grown out of NaOH/KOH fluxes in sealed silver tubes. The crystal structure consists of one-dimensional chains of edge-sharing RuO{sub 6} octahedral pairs along the b axis, separated by a two dimensional LnO{sub x} polyhedral framework. Each RuO{sub 6} octahedral pair is separated alternately by Ln atoms and its disordered component, observed as stacking faults in the HRTEM images.

36 MATERIALS SCIENCE↗

Influence of Mn addition on the microstructure and mechanical properties of a directionally solidified γ-TiAl alloy

Highlights: • Mn addition can significantly improve the yield strength of TiAl alloy. • Introduction of Mn facilitates the operation of twinning-controlled deformation. • Twin-dislocation interactions cause a continuous increase in work hardening rate. - Abstract: TiAl alloys with nominal compositions of Ti-47Al-2Nb-2Cr-(0, 1, 3, 5)Mn were prepared via electromagnetic cold crucible directional solidification (ECCDS), and the influence of Mn addition on the microstructure and mechanical properties of the alloys was investigated. The experimental results showed that the Mn atoms were dissolved within the TiAl alloy, and no Mn compounds were formed. Based on the X-ray diffraction (XRD) analysis results, the peak angle of the Mn-containing sample shifted to a higher value, indicating lattice shrinkage. The Mn addition also increased the volume fraction of the B2 phase. The yield strength of the TiAl alloy monotonically increased as the content of the substitutional-solute Mn atoms increased. The ultimate strengths of the TiAl alloys containing 1 at.%, 3 at.%, and 5 at.% Mn consequently decreased because micro-cracks were preferentially formed in the B2 phase during room-temperature deformation. The introduction of substitutional-solute Mn atoms could result in a reduction of the stacking-fault energy of the γ phase, and facilitate the operation of twinning-controlled plastic-deformation during the intermediate stage of the plastic deformation process. The interaction between the deformation twins and movable dislocations led to a continuous increase in the work-hardening rate.

36 MATERIALS SCIENCE↗

Cryogenic mechanical behaviors of CrMnFeCoNi high-entropy alloy

The CrMnFeCoNi high-entropy alloy (HEA) exhibits higher yield strength, ultimate strength and ductility at lower temperature. To further clarify the effect of the testing temperature on microstructure evolution, in this study in-situ synchrotron-based high-energy X-ray diffraction tensile tests were carried out from 298 K down to 123 K. The enhanced yield strength of the alloy at cryogenic temperatures can be attributed to the greater lattice distortion prior to plastic deformation. Higher strain hardening rate leads to the simultaneously enhanced strength and ductility of the studied HEA below room temperature. Both dynamic Hall-Petch hardening (twinning) and dislocation hardening provide high work hardening capacity for this alloy during the plastic deformation at cryogenic temperatures. The increased dislocation density and nano-twins at cryogenic temperatures can be attributed to the decrease in the stacking fault energy as the deformation temperature decreases. These studies could provide an in-depth understanding for the strengthening mechanisms of the HEA in different temperature conditions and guide the exploration of HEAs with superb mechanical properties at cryogenic environments.

36 MATERIALS SCIENCE↗

Recombination-related properties of a-screw dislocations in GaN: A combined CL, EBIC, TEM study

Cathodoluminescence (CL), electron beam current (EBIC) and transmission electron microscopy (TEM) techniques have been applied to investigate recombination properties and structure of freshly introduced dislocations in low-ohmic GaN crystals. It was confirmed that the only a-screw dislocations exhibited an intense characteristic dislocation-related luminescence (DRL) which persisted up to room temperature and was red-shifted by about 0.3 eV with respect to the band gap energy not only in HVPE but also in MOCVD grown samples. EBIC contrast of the dislocations was found to be temperature independent indicating that the dislocation-related recombination level is situated below 200 meV with respect of conduction band minimum. With the increasing of the magnification of the dislocation TEM cross-sectional images they were found to disappear, probably, due to the recombination enhanced dislocation glide (REDG) under electron beam exposure which was immediately observed in CL investigations on a large scale. The stacking fault ribbon in the core of dissociated a-screw dislocation which form a quantum well for electrons was proposed to play an important role both in DRL spectrum formation and in REDG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature transport in p-doped InAs nanowires

We present low temperature electrical measurements of p-type Indium Arsenide nanowires grown via molecular beam epitaxy using Beryllium as a dopant. Growth of p-type wires without stacking faults is demonstrated. Devices in field-effect geometries exhibit ambipolar behavior, and the temperature dependence of electron and hole field effect mobilities are extracted. At low temperatures, we observe reproducible conductance fluctuations as a result of quantum interference, and magnetoconductance data show weak antilocalization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural dependency of optical properties of m-plane InGaN multiple quantum wells grown on 2° misoriented bulk GaN substrates

A non-polar m-plane structure consisting of five InGaN/GaN quantum wells (QWs) was grown on ammonothermal bulk GaN by metal-organic vapor phase epitaxy. Surface step bunches propagating through the QW stack were found to accommodate the 2° substrate miscut towards the -c direction. Both large steps with heights of a few tens of nanometres and small steps between one and a few atomic layers in height are observed, the former of which exhibit cathodoluminescence at longer wavelengths than the adjacent m-plane terraces. This is attributed to the formation of semi-polar facets at the steps on which the QWs are shown to be thicker and have higher Indium contents than those in the adjacent m-plane regions. Discrete basal-plane stacking faults (BSFs) were occasionally initiated from the QWs on the main m-plane terraces, but groups of BSFs were frequently observed to initiate from those on the large steps, probably related to the increased strain associated with the locally higher indium content and thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a gall-resistant stainless-steel hardfacing alloy

Here, this work details the development of a new cobalt-free stainless steel powder metallurgy hardfacing alloy designed to replace Stellite 6, a cobalt-based hardfacing alloy used in nuclear valve applications. The fundamental strategy centers on alloying stainless steels with up to 0.5 wt% nitrogen, which is shown to increase both the volume fraction of hard phase precipitates and the strain-hardening rate of the matrix. The resultant alloy, Nitromaxx, exhibits galling performance that is comparable to Stellite 6, up to 350 °C. This performance is attributed to the suppression of strain localization events associated with galling. In particular, transmission electron microscopy and diffraction measurements from tensile tests show that the nitrogen addition decreases the calculated matrix stacking fault energy and enhances both deformation-induced martensite transformation at room temperature and deformation twinning at elevated temperature. These strain-hardening mechanisms, coupled with the increase in precipitate volume fraction, effectively suppress localization and enhance galling resistance up to 350 °C. Lastly, the enhanced galling resistance cannot be rationalized in terms of tensile stress-strain response alone.

36 MATERIALS SCIENCE↗

Microstructural improvements of InP on GaAs (001) grown by molecular beam epitaxy by in situ hydrogenation and postgrowth annealing

The characterization of high quality InP on GaAs (001) fabricated by molecular beam epitaxy using a two-step growth method involving hydrogenation during growth is reported. Electron diffraction and high-resolution transmission electron microscopy confirm that {approx}2 {mu}m thick InP epilayers on GaAs are heteroepitaxial and strain relaxed. Stacking faults and threading dislocations are mostly confined near the InP/GaAs interface and their densities decrease monotonically toward the InP surface. Additionally, rapid-thermal annealing following growth is found to result in a marked reduction in the number of dislocations and the disappearance of planar defects.

36 MATERIALS SCIENCE↗

In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel

The tension-compression type of load reversal produces an asymmetric cyclic tension-compression behavior and varied yielding stresses in the subsequent monotonic tension and compression in a twinning induced plasticity steel. The micromechanical behavior was elucidated via the evolutions of the stacking fault probability and the grain orientation density captured by in-situ neutron diffraction. The latter indicates more profound detwinning activities in a reversal from tension to compression than those from compression to tension and more twinning involves in monotonic tension than in compression. In conclusion, this is confirmed by the calculated twinning activities in monotonic tension and compression using the visco-plastic self-consistent model.

TWIP↗

Temperature dependence of deformation mechanisms and tensile strength of a new Ni-Fe-base superalloy

Highlights: • A new Ni-Fe-base superalloy with low cost has been developed. • The new alloy has excellent creep-rupture and tensile properties. • Its yield strength is insensitive to temperature below 700 °C. • The main tensile deformation mechanism of the alloy is APB shearing below 700 °C. - Abstract: After a standard heat treatment, the influence of temperature on the tensile strength and corresponding deformation mechanisms of a new Ni-Fe-base superalloy with a low γ' volume fraction are investigated in the temperature region between room temperature and 800 °C. Experimental results show that the yield strength of the experimental alloy is temperature independent below 700 °C, whereas, above the temperature, its yield strength decreases dramatically with temperature. Analyses of micromechanisms controlling the deformation behavior reveal that plastic deformation is accomplished mainly by anti-phase boundary (APB)-coupled dislocations shearing through γ' precipitates below 700 °C, while, above the temperature, the primary deformation mechanism changes from APB shearing to stacking fault shearing and then to precipitate bypassing via Orowan looping together with cross-slip and local climb of dislocations. Based on the experimental results, it is deemed that the transition in the operative strengthening mechanism with temperature accounts for the variation of the yield strength of the experimental alloy with temperature.

36 MATERIALS SCIENCE↗

Confocal Microscope Alignment of Nanocrystals for Coherent Diffraction Imaging

We have installed and tested an Olympus LEXT confocal microscope at the 34-ID-C beamline of the Advanced Photon Source (APS). The beamline is for Coherent X-ray Diffraction (CXD) experiments in which a nanometre-sized crystal is aligned inside a focussed X-ray beam. The microscope was required for three-dimensional (3D) sample alignment to get around sphere-of-confusion issues when locating Bragg peaks in reciprocal space. In this way, and by use of strategic sample preparations, we have succeeded in measuring six Bragg peaks from a single 200 nm gold crystal and obtained six projections of its internal displacement field. This enables the clear identification of stacking-fault bands within the crystal. The confocal alignment method will allow a full determination of the strain tensor provided three or more Bragg reflections from the same crystal are found.

43 PARTICLE ACCELERATORS↗

Equiatomic CoPt thin films with extremely high coercivity

In this paper, magnetic and structural properties of near-equiatomic CoPt thin films, which exhibited a high coercivity in the film-normal direction—suitable for perpendicular magnetic recording media applications—are reported. The films exhibited a larger coercivity of about 6.5 kOe at 8 nm. The coercivity showed a monotonous decrease as the film thickness was increased. The transmission electron microscopy images indicated that the as fabricated CoPt film generally consists of a stack of magnetically hard hexagonal-close-packed phase, followed by stacking faults and face-centred-cubic phase. The thickness dependent magnetic properties are explained on the basis of exchange-coupled composite media. Epitaxial growth on Ru layers is a possible factor leading to the unusual observation of magnetically hard hcp-phase at high concentrations of Pt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗