Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shell effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part I: Linear Theory

Conical shell theory and piston theory aerodynamics are used to study the aeroelastic stability of the thermal protection system (TPS) on the NASA Hypersonic Inflatable Aerodynamic Decelerator (HIAD). Structural models of the TPS consist of single or multiple orthotropic conical shell systems resting on several circumferential linear elastic supports. The shells in each model may have pinned (simply-supported) or elastically-supported edges. The Lagrangian is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the equations of motion. The natural modes of vibration and aeroelastic stability boundaries are found by calculating the eigenvalues and eigenvectors of a large coefficient matrix. When the in-flight configuration of the TPS is approximated as a single shell without elastic supports, asymmetric flutter in many circumferential waves is observed. When the elastic supports are included, the shell flutters symmetrically in zero circumferential waves. Structural damping is found to be important in this case. Aeroelastic models that consider the individual TPS layers as separate shells tend to flutter asymmetrically at high dynamic pressures relative to the single shell models. Several parameter studies also examine the effects of tension, orthotropicity, and elastic support stiffness.

Goldman, Benjamin D.↗
NASA NTRS1992

Mechanics of anisotropic plates and shells - A new look at an old subject

A number of aspects of the mechanics of anisotropic plates and shells are discussed. The topics covered include computational models of anisotropic plates and shells, consequences of anisotropy on deformation couplings, symmetry types, stress concentrations and edge effects, and importance of transverse shear deformation; recent applications and recent advances in the modeling and analysis of anisotropic plates and shells; and new research directions.

Noor, A. K.↗
NASA NTRS1981

On the shape and orientation control of an orbiting shallow spherical shell structure

A proposed method for controlling the shape and orientation of very large shallow dish type receiver/reflectors to be used in communication, radiometry and in electronic orbital based mail systems involves connecting a rigid light weight dumbell with heavy tip masses to the shell at its apex by a spring loaded double gimballed joint with dampling. To completely damp the system transient motion in all of the important lower frequency modes, an active control system is required. A mathematical model is extended to include the effects of point actuators located at preselected positions on the shell surface. The formulation of the uncontrolled dynamics assumes an a priori knowledge of the frequencies of all the elastic modes to be incorporated within the system model. As an example, three rigid body modes and six elastic modes are included in the model and six actuators are assumed, none of which lies on a nodal line or circle.

Bainum, P. M.↗
NASA NTRS1988

Postbuckling of eccentric open-section stiffened composite panels

A numerical study of the postbuckling behavior of open-section stiffened composite compression panels is presented with emphasis on the effects of an anisotropic attached flange on results, the strain distribution near collapse, and the change of buckle pattern during postbuckling response. Results are obtained for a blade stiffened panel with orthotropic or anisotropic attached flanges from a new verison of STAGS, a general, branched shell, nonlinear computer program. Comparisons between these results indicate the effects of anisotropic flanges on the results. Elastic strain distributions are obtained from STAGS and indications are given about the collapse loads and modes of a particular panel. Change of buckle pattern is studied using STAGS and a special purpose computer program for long plates. Comparisons are made with experimental results.

Stein, Manuel↗
NASA NTRS1975

Numerical nonlinear inelastic analysis of stiffened shells of revolution. Volume 1: Theory manual for STARS-2P digital computer program

The theoretical analysis background for the STARS-2P nonlinear inelastic program is discussed. The theory involved is amenable for the analysis of large deflection inelastic behavior in axisymmetric shells of revolution subjected to axisymmetric loadings. The analysis is capable of considering such effects as those involved in nonproportional and cyclic loading conditions. The following are also discussed: orthotropic nonlinear kinematic hardening theory; shell wall cross sections and discrete ring stiffeners; the coupled axisymmetric large deflection elasto-plastic torsion problem; and the provision for the inelastic treatment of smeared stiffeners, isogrid, and waffle wall constructions.

Svalbonas, V.↗
NASA NTRS1980

A process of stellar nucleosynthesis which mimicks mass fractionation in P-xenon

The combination of the O-shell theory of Heymann and Dziczkaniec and the supernova theory of Woosley and Howard clearly identifies the astrophysical sites for the formation of the anomalous light Xe component in carbonaceous chondrites. These sites are the O- and Ne-shells, and possibly C-shell of a massive star. Most of the Xe-124 and Xe-126 are formed in the O-shell during hydrostatic core silicon-burning, when a seed of heavy nuclei is exposed to an effective temperature near T9 = 2.0. Xe-128 is formed via Ba-128 in the O-shell, but the amounts appear too small to satisfy the deduced Xe-128/Xe-124 and Xe-128/Xe-126 yield ratios from the chondrites. However, substantial amounts of Xe-128 can be formed in the adjacent Ne- and C-shells during the explosion. The formation of Ba-128 in the O-shell would increase if the (gamma, alpha) photodisintegration rate in Ba-128 is actually smaller than calculated by Woosley and Howard. Lewis et al. have proposed that the anomalous light Xe component is mass-fractionated normal Xe. It is in this sense that the process of stellar nucleosynthesis of the present paper mimicks mass-fractionation.

Heymann, D.↗
NASA NTRS2021

East–West Proton Flux Anisotropy Observed with the PAMELA Mission

We present a study of the east–west anisotropy of trapped-proton fluxes in low-Earth orbit based on the measurements of the Payload for Antimatter Matter Exploration and Light-nuclei Astrophysics(PAMELA)experiment. The differential intensities of eastward- and westward-traveling protons detected in the South Atlantic Anomaly region were estimated as a function of equatorial pitch angle and drift shell, for six energy bins between80 MeV and 2 GeV. We found that, as a consequence of the strong atmospheric gradient coupled with the large gyro radius in this energy range, the intensities of eastward fluxes exceed those of westward fluxes by a factor of∼10–20. However, the reported directional asymmetry also depends on the sign of the local flux gradient, resulting in more intense westward fluxes beyond the radial distances where the inner belt peaks. PAMELA observations can be used to improve the description of the near-Earth radiation environment at lowest altitudes and highest trapping energies, where current theoretical and empirical models are affected by the largest uncertainties. Unified Astronomy Thesaurus concepts: Cosmic rays(329);Van Allen radiation belts(1758)1. Introduction Low-altitude inner-belt protons are strongly influenced by the density distribution of Earth’s atmosphere, mostly through interactions with its neutral constituents, which induce significant flux anisotropies. In prim is, the atmospheric loss cone results in a steep pitch-angle distribution, which becomes narrower for lower drift shells. A further, azimuthal anisotropy originates from finite gyro radius effects at proton energies in excess of a few tens of MeV(Haerendel1962; Lenchek & Singer1962). In fact, for a given spacecraft position, protons with the same pitch angle but different gyro phase—the azimuth angle associated with the gyration motion—have their guiding centers on different drift shells. In particular, protons from the west and from the east gyrate around magnetic field lines located at higher and lower altitudes, respectively. The guiding-center separationΔhincreaseswith increasing energy, so that protons moving eastward will encounter progressively lower drift-averaged densities, thus experiencing less atmospheric absorption; the opposite situation will occur for protons traveling westward, resulting in an east–west asymmetry of flux intensities whenΔhbecomes comparable to or larger than the flux scale height(Garmire1963; Heckman &Nakano1963).The trapped-flux anisotropy is a relevant aspect of the modeling of the low Earth orbit(LEO)radiation environment, given the significant engineering implications, especially for The Astrophysical Journal,919:114(6pp), 2021 October 1https://doi.org/10.3847/1538-4357/ac1677© 2021. The American Astronomical Society.

A. Bruno↗
NASA NTRS1995

Actuator placement for active sound and vibration control of cylinders

Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The cylinder is excited by an exterior noise source -- an acoustic monopole -- located near the outside of the cylinder wall. The goal is to determine the force inputs and sites for the piezoelectric actuators so that (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. We studied external monopole excitations at two frequencies. A cylinder resonance of 100 Hz, where the interior acoustic field is driven in multiple, off-resonance cylinder cavity modes, and a cylinder resonance of 200 Hz are characterized by both near and off-resonance cylinder vibration modes which couple effectively with a single, dominant, low-order acoustic cavity mode at resonance. Previous work has focused almost exclusively on meeting objective (1) and solving a complex least-squares problem to arrive at an optimal force vector for a given set of actuator sites. In addition, it has been noted that when the cavity mode couples with cylinder vibration modes (our 200 Hz case) control spillover may occur in higher order cylinder shell vibrational modes. How to determine the best set of actuator sites to meet objectives (1)-(3) is the main contribution of our research effort. The selection of the best set of actuator sites from a set of potential sites is done via two metaheuristics -- simulated annealing and tabu search. Each of these metaheuristics partitions the set of potential actuator sites into two disjoint sets: those that are selected to control the noise (on) and those that are not (off). Next, each metaheuristic attempts to improve this initial solution by calculating the change in the objective value when one selected actuator site is turned off and one actuator site that previously was not selected is turned on. All such pairwise exchanges are performed and the exchange that improves the objective the most is made. Eventually the search is unable to improve the objective value and a local optimum (with respect to pairwise exchanges) is reached. Both simulated annealing and tabu search provide mechanisms to escape local optima and allow the search to continue until (hopefully) a global optimum is found. Our experiments with the 100 Hz and 200 Hz cases confirm that both metaheuristics are able to uncover better solutions than those selected based upon engineering judgement alone. In addition, the high quality solutions generated by these metaheuristics, when minimizing interior noise, do not further excite the cylinder shell. Thus, we are able to meet objective (2) without imposing an additional constraint or forming a multiobjective performance measure. An additional observation is that in many cases the amplitude and phase values for several chosen actuator sites were nearly identical. This natural grouping means that fewer control channels are needed and the resulting control system is simpler. Currently no power requirements have been set, so objective (3) cannot be addressed. A set of experiments is planned with a laboratory test article (a cylinder). For these experiments the transfer matrices will be generated experimentally. It is hoped that the predicted performance of the best actuator sites found by our metaheuristics will correlate well with the measured performance.

Kincaid, Rex K.↗
NASA NTRS1995

Solar convection zone dynamics and rotation

Helioseismology reveals that there appears to be a discrepancy between the differential rotation profile with the radius and latitude deduced from the inversion of the observed frequency splitting of p-modes and the rotation profile anticipated from various global simulations of convection in rotating shells. The problem may be caused by deductions in numerical simulations of convection which was considered near laminar flows. A high performance computing offers paths for studying the properties of such astrophysical turbulence. A range of approaches to study the basic dynamics of convection is reviewed, along with its ability to redistribute angular momentum in rotating systems. The results of recent three-dimensional simulations of turbulent compressible convection constrained by the effects of rotation are described for the cases in spherical shells and local area f-planes. The turbulence possesses intense vortex tubes with intricate interactions and instabilities. The theoretical studies reveal that the transition to turbulent states has contributed to significant changes in flow symmetries and transports, and that such a turbulent convection can drive substantial mean flows, which are distinctly different from those in which the convection is dominantly laminar.

Toomre, Juri↗
NASA NTRS1973

Nonlinear problems of the theory of heterogeneous slightly curved shells

An account if given of the variational method of the solution of physically and geometrically nonlinear problems of the theory of heterogeneous slightly curved shells. Examined are the bending and supercritical behavior of plates and conical and spherical cupolas of variable thickness in a temperature field, taking into account the dependence of the elastic parameters on temperature. The bending, stability in general and load-bearing capacity of flexible isotropic elastic-plastic shells with different criteria of plasticity, taking into account compressibility and hardening. The effect of the plastic heterogeneity caused by heat treatment, surface work hardening and irradiation by fast neutron flux is investigated. Some problems of the dynamic behavior of flexible shells are solved. Calculations are performed in high approximations. Considerable attention is given to the construction of a machine algorithm and to the checking of the convergence of iterative processes.

Kantor, B. Y.↗
NASA NTRS1980

Relativistic K-shell Auger rates, level widths, and fluorescence yields

Systematic relativistic (Dirac-Hartree-Slater) calculations of atomic K-shell Auger transition probabilities are reported for 25 elements with Z between 18 and 96, inclusive. K-level Auger widths are found to be enhanced by relativistic effects, while total K-level widths are reduced. Relativistic theoretical K-shell fluorescence yields are in excellent agreement with experiment. Theoretical relative intensities of K-LX Auger transitions in heavy elements, calculated in j-j coupling, agree well with measurements; for low Z, configuration interaction and intermediate coupling must apparently be included.

Chen, M. H.↗
NASA NTRS1980

K-shell photoionization of multielectron atomic systems

A simplified procedure is proposed for calculating the cross section for photoionization from the K-shell for a general atomic system that contains an arbitrary number of outer-shell electrons. The procedure retains the formalism of the one-electron atom case (pure Coulomb-field problem) by determining the effective nuclear charge reduced from Z by 'screening parameters' associated with the other K-shell electron and the outer-bound electrons. The parameters are determined essentially by fitting the atom's radial electric field to Coulomb form at the distance from the nucleus where the integrand of the dipole radial integral is peaked.

Gould, R. J.↗
NASA NTRS1976

Angular distributions of electrons of energy greater than 0.06 MeV in the Jovian magnetosphere

Measurements of the angular distribution of electron intensity in the Jupiter magnetosphere were made by the University of Iowa experiment on Pioneer 10. The data were from three directional particle detectors with effective integral threshold of 0.06, 0.55 and 0.5 MeV respectively. It was discovered that the central core of the magnetosphere for radial distances less than 12 Jovian radii is dominated by pitch angle distributions strongly peaked at alpha = 90 degrees, while the region of radial distances 12-25 Jovian radii shows bidirectional and approximately equal maxima at alpha = 0 and 180 degrees. Substantial field-aligned streaming was detected on two occasions, each of about 1 hour duration. No distinctive effects on angular distributions were observed near the L shells of satellites.

Sentman, D. D.↗
NASA NTRS1976

Ultraviolet observations of Be stars /Review paper/

In the last decade twelve major space experiments have observed Be stars in the UV region of the spectrum. The characteristics of the experiments are listed in a table. The studies were conducted with the aid of two rockets, five astronomical satellites, three manned satellites, and one planetary probe. Another table shows the name and the spectral type of the bright Be stars observed in the UV. Approaches concerning a system for ultraviolet spectral classification are discussed. Attention is also given to aspects of mass loss, the effects of rapid rotation, and the properties of the shell.

Heap, S. R.↗
NASA NTRS1988

Light echoes - Novae

The sudden brilliance of a nova eruption will be reflected on surrounding dust grains to create a phantom nebula. Previous searches for these light echoes have used relatively short exposures with photograhic detectors. This paper reports on a search around eight recent novae with long exposures using a CCD camera. Despite an increase of sensitivity by over an order of magnitude, no light echoes were detected. It is found that the average grain density must be less than about 10 to the -9th per cu cm for distances from 0.1 pc to 1000 pc from the novae. The light echo around Nova Persei 1901 was caused by reflection off clouds with grain densities of several times 10 to the -9th per cu cm which are at distances between 0.1 pc and 10 pc. Echoes from dust in a circumstellar shell or ejected during a previous eruption will be effectively unobservable.

Schaefer, Bradley E.↗
NASA NTRS1988

A mixed formulaton of C(0)-linear triangular plate/shell element - The role of edge shear constraints

A simple and effective linear C(0)-tiangular element for plates and shells is developed on the basis of the Hellinger-Reissner mixed variational principle with independently assumed stress and displacement fields. Two main features are emphasized in this development concerning the assumed transverse shear stress field. First, this assumption results in edge-type penalty constraints in the thin plate/shell regimes. Second, the element is used in the form of a four-triangle, cross-diagonal macroelement mesh. As a result, the element is shown to be free from shear locking in thin plate/shell applications, and it satisfies all the appropriate patch tests required for Kirchhoff plate models. In addition, the element exhibits good overall convergence properties in a variety of test problems for plates and shells. Finally, from the computational standpoint, the element is very efficient since all stiffness component matrices are derived in explicit forms.

Saleeb, A. F.↗